Counting matching models…
This is an OpenSCAD module library for propellers and spinners. See this excellent video by Bruno Antunes on how to integrate this library into Fusion 360. This design models elliptical propeller blades that transition smoothly through…
Can be used for DIY RC Airplanes, education and more. If you want other models of NACA airfoils, feel free to comment. Included models; NACA-0012 NACA-0015 NACA-1812 NACA-2212 NACA-2312 NACA-2408 NACA-2412 NACA-4412 NACA-5416 NACA-7712
Be careful!!: 3D printed propellers could possibly explode when reaching high rpm's. I strongly discourage using it in BLDC motors, or any other high-rpm motor. I just modified the original code (many thanks to the og author, great coder…
NACA Airfoil 2412. I use this for a test print for new materials or different settings. Uses surprisingly little filament for its size. Print instructions Suggested settings: one perimeter zero top and bottom layers gyroid infill 15%
NACA Duct to 3inch Hose Outlet Suitable for ducting airflow into a car cabin, or to brakes etc As seen here: https://www.youtube.com/watch?v=NRV6KAyzwkw
NACA style duct Used on our race car for certain applications where some airflow is needed.
This is a NACA 4412 based rib to build your own wing.
Scalable NACA Air Inlet – Seamless Aerodynamic Integration Enhance airflow efficiency with the NACA Air Inlet , designed for seamless integration into a variety of applications, from automotive hoods and body panels to RC aircraft, UAVs,…
A friend needed a NACA duct for his racecar, so I made one. It's a small 1.5in hose opening because it is only needed for helmet airflow, mounted on the side window. I'm very happy with how it came out, so I decided to share. Template…
My attempt at the Tom Stanton VTOL wing. With two wing spars (16mm and 8mm) spaced 70mm from each other. Level with another at 0 deg of attack. Wing chord ~180mm Wing height ~23mm Ribs spaced 30mm apart.
This wing is fully functional, it was made out with the NACA-2412 airfoil, the same used in the cessna 172, the flap, extends and retracts as in the real life passenger airplanes. It can be done fully 3d printed, but the weight would be…
Above all, I would like to thank my lecturer Burak GÜLER for his inspiration and advice in creating this model. This model based on the NACA 4415 aerofoil and the UIUC Airfoil Database . The model is intended for educational and…
Simple inverted drying rack and storage solution for Glencairn glasses. Easy assembly with a couple drops of solvent or glue. Print instructions I liked the look of Archimedean Chords as the top layer fill with the copper filament. The…
This isn't your average Benchy. The Slimer Benchy has been slimed, possessed, and reanimated with paranormal flair. Featuring drippy ghost-like textures, bulging eyes, and an open-mouthed grin of the haunted variety, it’s a spooky remix…
NACA based air inlet (duct). Size can be adapted by scaling the STL-File. Inlet width: 18.5mm, length: 37.3mm. Inlet hight: 3.3mm. Works great for motor cooling of RC gliders. Retrofitting on existing fuselages possible.
The cutouts are for wire pass through for a upcoming project (as well as a locating hole for fixing the AOA) Chord: 180mm Spar: Center 58mm from the front Length: 250mm Thickness: 23.1mm
NACA6409-wing rib. originaly made for throwing plane, just to test its abilities. maybe more versions in the future.
A template set to draw NACA (4 digit series) airfoils. The set contains 7 templates with the following airfoils: 1111, 1112, 1115, 1215, 1407, 1513, 1614, 1714, 1815, 2107, 2110, 2207, 2214, 2307, 2309, 2310, 2412, 2415, 2611, 2715, 3207,…
NACA air intakes for the L-39 Albatros in different sizes. There are two different assembly variations. The version shown in picture one is used when the installation to the fuselage is only accessible from the outside. In that case you…
The CannaCaddy Compact - A 2x2 gridfinity module designed specifically to hold your smoking tools. I originally just wanted something to hold the bowl head while I packed it, and the idea evolved into holding lighters and carts and…
The CannaCaddy Classic - A 2x3 gridfinity module designed specifically to hold your smoking tools. I originally just wanted something to hold the bowl head while I packed it, and the idea evolved into holding lighters and carts and…
Templates to hot wire cut a FPVWRA Spec Wing. (Make the templates from ply) 1, cut 4 blocks 228.7mm wide. 2, mark where the pointer is on the inboard template. 3, mark square across the block. 4, position the next template inline with…
I designed this NACA duct in Fusion 360 using reference images and measurements from a client, building a drag Honda Civic. Its dimensions are 235.5mm x 157.5mm x 67.3mm but can be resized to suit your purposes. PETG/ASA recommended for…
Simple wall mount for Jabra Panacast conference room camera. Design file included so that you can adjust length to suit your wall ←→ TV distance.
I picked up this magnacart from my local Costco and I wanted to use it to haul around some of my Milwaukee ½ sized packouts. This bracket provides you with back to back mounting points that allows you to mount them and still have enough…
This is a model of mine, specifically for steam turbines, based on the root. Because of the airfoil's profile, I had to make 3 versions prior. It is an improvement, I hope. Enjoy!
NACA ducts are often used as air inlets to cool electronics (particularly speed controllers) inside foam board RC airplanes because they are simple and efficient, but it's hard to cut one freehand without plans or a template. This little…
Feel free to remix it! Comment with your make :D
I made this model as a visual representation for my Material Science class. Take into consideration that it is not a standard part The height is 10 cm The width is around 9 cm. Suppots are included.
https://cad.onshape.com/documents/35b39d8c8107c2b331d2780e/w/256abfa0e0ee655659f38151/e/91e73e25f4508157b69f15c5?renderMode=0&uiState=6a8b2185bd0b2e6c57989a03
I have this BonnaCase for my bass trombone: https://mbcases.com/portfolio/cases/trombones/case-for-detachable-bell-bass-trombone But the accessory compartment only contains a cumbersome mouthpiece pouch. All other accessories have to be…
Naca 2412 morphed 11 deg AOA
This thing lets you draw a beautiful symmetric aerofoil for your sketches. The standard chord is 13cm, but you can scale to your hearts content. Category: 2D Art
I just love my cats, so I decided that I wanna see their little faces on my Christmas tree, while they are absolutely trashing my tree! ✨ 🎄🐾 ────────────────────────────⋆⋅☆⋅⋆──────────────────────────── These ornaments are the purr-fect…
Gopro session 4/5 Runacam 5 mount ASTROX X5 JOHNNYFPV V1 and V2 20 and 25 and 30 dégrées inclus Printed in SainSmart TPU A95 or TIANSE TPU 0.15 layer hight 75% or 50 infill Support Everywhere Thank you and happy printing Category: Hobby
Angle of attack template for international moth main horizontal foil
Table mount for Jabra PanaCast conference camera. We use it on our conference tables at the office. Works great with cable management as the camera wont wander around on the table. Replace the original foot with the table mount. You can…
Designed to be glued into the existing mounting hole in the wing for cooling your RC and FPV electronics. Just remember that you also need a proper inlet. You might also want to check out my super lightweight rudderhorns for this plane.…
A customizable NACA 4415 aerofoil wing section with the four classic construction lines printed onto the end face in color: chord line (red), camber line (blue), max-thickness line at 30% chord (brown) and leading-edge radius circle…
IMPORTANT WARNING!! - pressure holding ability is subject to construction methods, rated materials, and condition of materials. BUILD AND USE AT YOUR OWN RISK! Unsuitable materials or inadequate construction techniques may result in a…
Add a sculptural, modern touch to your lighting setup with this twisted-wave 3D lamp shade, generated in LuminaCAD. As the shade rises, its organic, multi-lobed ribs gently spiral, creating dynamic light and shadow gradients when…
Made the file from an SVG and used it for Science Fair. Optimal ground effect at around 1 chord (177.8mm) height off deck.
A proper aerofoil fan rotor for your desk - real twisted NACA-section blades, not flat paddles - on a clean two-post display stand. The whole rotor is generated by ONE native TrueGeometry Playground command (/aerofoil fan), and blade…
A built-up RC wing skeleton you can resize in one edit: 13 laser-style NACA 4415 ribs on two spar tubes, root and tip caps, a servo box, and an optional translucent skin - all generated with native TrueGeometry Playground commands, no…
A lightweight, fully 3D-printable RC wing rib: a hollow NACA 4412 aerofoil wall, a closed leading-edge D-cell, two spar webs forming an 8 mm rectangular spar slot, and a hollow aft bay. Built and exported entirely in TrueGeometry…
Heads-up, honestly: this is an untested print. The blade root is embedded 1 mm into the stand base on purpose (overlapping shells, no boolean union), so slice it as one piece and check your slicer preview. No interference check has been…
Enhance your interior lighting with this classic, rounded 3D-printable lamp shade, generated as a completely manifold "LuminaCAD Watertight 3D Lamp Shade (E27)". Provided in the file , this variant features a smooth, bulbous profile that…
Upgrade your space with this custom 3D-printable lamp shade, generated with LuminaCAD. The mesh is 100% manifold and watertight, ensuring a smooth, error-free slicing experience. It is sized to fit standard E27 lamp sockets (approx. 40–42…
Enhance your interior lighting with this classic, rounded 3D-printable lamp shade, generated using LuminaCAD. This compact model measures approximately 178mm in diameter and features a smooth, bulbous profile that provides excellent light…
Scalable NACA Air Inlet – Seamless Aerodynamic Integration Enhance airflow efficiency with the NACA Air Inlet , designed for seamless integration into a variety of applications, from automotive hoods and body panels to RC aircraft, UAVs,…
wanted a new aerodynamic nose with an integrated camera mount Untested +5 -15 degrees camera tilt Print Settings Printer Brand: Bambu Lab Printer: A1 Mini Rafts: No Supports: Yes Resolution: 0.16 Infill: 100 Filament: something strong…
Naca duct, I use them on my splitter but can be mounted anywhere really. If going in your bonnet I suggest using at minimum ASA but you will want something that is temperature and UV resistant. If they are going under your splitter if its…
This NACA duct was designed to be a replacement to the factory one and be slightly more efficient, it can be glued in place with a product like Bostik 7005 or bolted into place . Added a built in support so the foil can be printed…
Interlocking poles have been mis-used have redesigned replacements may need printing at an angle for strength Category: Other
A piece for mount a Panacast 50 on stand poly studio PETG, 0.6 nozzle, 0.3 layers
A simple Parametric Keel / Foil using NACA calculations This code generates Keel, Foil, rustic hulls and the 2D outline More about Naca foils: https://en.wikipedia.org/wiki/NACA_airfoil Category: Parts
Soporte para cámara Panacast, Jabra, pero que sirve perfectamente para diferentes tipos de cámara web, pensado para atornillar a pared, debajo de la pantalla, a modo de sala de videoconferencia. Con la misma distancia de tornillos que la…
