12,106 models
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
See my original model . Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself. Should be fine…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
A desktop nameplate, sweeping around in a circle. Customize it to show your name or text. To do that, use the makerworld customizer (fonts are only Arial currently) or install OpenSCAD on your own computer and follow the customizing…
Print approx. €5.62–€6.87 excl. taxPreliminary estimate for one variant
Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for one variant
Christmas ornament with articulated legs. Print without support and 0% infill! Let the build plate cool down and don't warp the warm build plate to get the part of as the hands can break of the model.
Print approx. €1.52–€1.85 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant
A V8 engine block with a top part suitable for holding your business/name card. Test prints were made on a Prusa i3 MK3S and an Anycubic Kobra 2 from PLA with 0.2 mm layer height, 5 % infill density, 190 °C nozzle temperature and 65 °C…
Print approx. €22.85–€27.93 excl. taxPreliminary estimate for one variant
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Print approx. €8.76–€10.71 excl. taxPreliminary estimate for one variant
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Print approx. €10.74–€13.13 excl. taxPreliminary estimate for one variant
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
harry potter tags for Christmas, Pendants or keychains
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Use these 1250 names and words on your Crocs to customize them (jibbitz)! If a name is missing or you need other words, you can easily create the STL using the included OpenSCAD file (See “Customizing” below) Or use the online customizer…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
Instructions Install OpenSCAD (don't worry it's free and simple) Download NameTagGenerator.scad (below) and open it Edit name variable and then hit F5 followed by F6 (render), finally export the .STL file. Open NameTagGenerator.3mf…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Quick to print and optimised for 0,4mm nozzle much needed tree hooks every Christmas… Enjoy!!
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €2.59–€3.17 excl. taxPreliminary estimate for one variant
Visit Poison Apple Prints on Patreon for more Disney inspired character models as well as some great gifts for the Disney lovers in your life! https://www.patreon.com/PoisonApplePrints RESIN 45 degree angle Density 75 percent Raft shape…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
Death Star Ornament The model comes in a big size, so you can modify it to fit your tree style or use the bottom as a bowl. It was printed in 40% and 50%, it worked great. Once the bowl print is ready I will share the results. There is a…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…
Print approx. €20.74–€25.35 excl. taxPreliminary estimate for one variant
Oui oui, I have croissants in my Christmas tree! This is one of my first designs I made in Fusion a couple of years ago. And every year people say how cool they think the croissant ornaments are in my Christmas tree 🥐🎄 Size…
Print approx. €2.18–€2.67 excl. taxPreliminary estimate for one variant
Spell it out, wear it proud! 🎁 This customizable name necklace makes for a truly thoughtful and one-of-a-kind gift. Imagine the joy of receiving a necklace with a name or message specially crafted for someone you love. It's a piece of…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
I have added color to Vlado Turek 's Chrismas ornament in order to print it on my MK3S/MMU2 using PLA: “Yellow-Green”, Red, White, Yellow and Black.
Print approx. €10.20–€12.47 excl. taxPreliminary estimate for one variant
For those of us who can't paint, I remixed the ornament to a multi-color version. The 3MF is scaled up to be about a 3.5" ornament. I wanted a decent sized print to be shown with pride on our tree. As an added bonus, it makes it a little…
Print approx. €15.22–€18.60 excl. taxPreliminary estimate for one variant
Some new fireworks are in the sky! Falling stars and such are to be seen! So, we wish you all a Happy New Year already! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was so nice to send us some samples…
Print approx. €3.63–€4.43 excl. taxPreliminary estimate for one variant
I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Ornament hanger for cristmastree
Print approx. €0.75–€0.91 excl. taxPreliminary estimate for PETGSource material: PET
This model is designed in Fusion360. I took inspiration in Nordic paper ornaments and designed it In way that it can be printed without supports. i printed it on my Prusa Mini+ with 0.6mm nozzle and purple PLA Prusament. There is no need…
Print approx. €3.81–€4.65 excl. taxPreliminary estimate for one variant
About I was looking to buy a MIDI pedal with a good range of motion and a fairly low price (mainly to control virtual instrument's expression/volume while my hands are on the keyboard, and my right leg is on a sustain pedal). I didn't…
Print approx. €6.03–€7.37 excl. taxPreliminary estimate for one variant
Yes, you need supports. Use paint-on supports to create flying buttresses that not only keep the icicles adhered to the bed, they keep the tiny arms of the icicles from breaking. I've provided a screenshot of how they should look. I've…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for one variant
After printing my previous Infill Type test, I wanted to create a version with the Names of the options. I also wanted to have each type individually. Hope you like the files. Use the 3mf to get it all setup in PrusaSlicer with the…
Print approx. €5.04–€6.16 excl. taxPreliminary estimate for one variant
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
Print approx. €9.61–€11.74 excl. taxPreliminary estimate for one variant
Christmas Countdown! Follow Us! To get reminded about our free holiday models (like this one!) we are going to release regularly until Christmas 2022 ! Christmas Stocking Earrings or Ornament The print is scaled to be an earring and can…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Something special - a small amazing shiny star that has fallen right from the sky. A small thank you to all of our supporters and the people who downloaded our models. We reached lately 100 000 downloads which is just so amazing for us!…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
A design i created in Fusion 360 based on a drawing i have seen online. Thickness 20mm Height: 163mm Width: 94mm Print Settings: Layerheight: 0.3mm Infill 10% Top / bottom layers (default): 4 I would modify the postion of the seam to be…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
This is yet another 2020 dumpster fire model. It has colored text and wheels! It's designed to print easily with no supports (all overhangs are ≤30°), and all tolerances are 0.3 mm. If you find that things don't quite fit, try increasing…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
This is a beautiful looking christmas tree ornament, perfect for christmas and winter time. Thank you for your interest! Feel free to share your prints or print files with the community! Design by pmoews, downloaded from Thingiverse here:…
Print approx. €3.04–€3.72 excl. taxPreliminary estimate for one variant
This was inspired by the santa hat for the Lego toilet paper holder ( https://www.prusaprinters.org/prints/13127-santa-hat-for-vvk187-lego-man-toilet-paper-holder ). Print instructions The .gcode file was created with Cura, and includes a…
Print approx. €4.26–€5.20 excl. taxPreliminary estimate for one variant
I published this model originally on Thingiverse and Thangs a few months before joining Printables. Now that it's the Christmas time, I wanted to publish it here, too. The photo shows my latest print of the ornament sliced with…
Print approx. €4.48–€5.48 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for PETGSource material: PET
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
So you want to know what fan speed is best? You can test optimal print fan speed with this tower. You MUST use newest PrusaSlicer and use the fan speed settings in the photo, slice at 0.2mm layer height. I recommend using a large brim…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Ein Schlüsselanhänger mit dem Namen Claudia
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
This pin board is heavily inspired by the Mickey Mouse ears pin board by Jerry9245 here (https://www.thingiverse.com/thing:5542138). I created the model myself but used Jerry's method of removing the top/bottom layers to expose the…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for one variant
Trophy was printed without supports and with 20 % lightning infill. I have added a blank label for your creations. Interchangeable name tags are practical. There are no more winners or losers. According to the results, the players choose…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
This design is based off of the Super Mario character, Princess Peach, I printed it with a .6mm nozzle, but you will get better details with a .4mm nozzle, I used White PLA, so Christmas lights would show through the design and make…
Print approx. €1.92–€2.35 excl. taxPreliminary estimate for one variant
Simple ornamental dagger, drawn from scratch in OnShape. Printed on a Prusa Mini (the dagger is 180mm long, rotated 45 degrees, it fits nicely on the bed. Onshape:…
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for one variant
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Print approx. €0.95–€1.16 excl. taxPreliminary estimate for PETGSource material: PET
Slider repair kit Fits: DT 790 / DT 797 DT 770 / DT 770 PRO / DT 770 PRO HT DT 880 / DT 880 PRO / DT 880 PRO HT DT 990 / DT 990 PRO HS 200 Dyn / HS 200 Rotor / HS 200 Trend HS 400 MMX 300 UPDATE - 30.10.2022: Some slight fine-tuning.…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Christmas tree decoration with a forest theme. You will achieve the best result when printing from WOOD filament. More Christmas ornament Christmas ornament - forest theme I Christmas ornament - forest theme II Christmas ornament - forest…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) Supports needed Scale it as you like :)
Print approx. €2.75–€3.36 excl. taxPreliminary estimate for one variant
You will definitely be on Santa's "nice" list with this Christmas tree ornament. A unique gift for the gamer in your life, whether it's for your significant other, a child, or an entire household of gamers, this ornament is sure to be a…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
infill 20-50% supports no More names are added monthly if your name is not in say what name you would like in comments. happy printing all are unique some are tall and some are short
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0,2 (Recommended) Supports needed Scale it as you like :)
Print approx. €9.51–€11.62 excl. taxPreliminary estimate for one variant
Elevate your winter style with our Snowflake Earrings or Ornament! These intricate snowflakes are designed to be the perfect addition to your festive look. Printed to a size that's ideal for earrings, they can easily be assembled with…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
diameter about 100mm 3mm thick 2mm hole for hanging
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Heck yeah! That is how it’s done. I simply cannot believe we pulled that off! Perhaps not the cleanest job, but not bad for a spur of the moment thing. Wait until Saul sees this… Ha! He’ll have smoke coming out of his ears! Yikes, you…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Be aware that the printing parameters reflect for only a half sphere! I recommend not to print the whole thing at once to spare you the trouble of printing unnecessary supports and their removal of it. I recommend to print two half…
Print approx. €5.34–€6.53 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) No supports needed Scale it as you like :) You can print multi color keychain with a single nozzle (use this video for reference…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
This is a stick of dynamite (32mmx200mm) and a band for making a three-stick bundle. Printing: The dynamite consists of two pieces, the Stick and the Plug. The Plug holds the fuse. Both were printed without supports. The Wrap is a…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for PETGSource material: PET
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL Jednoduchý držák ručníků na radiátor (žebřík) s průměrem trubky 20 mm. Může být beze jména nebo se jménem. Přikládám soubory se jmény Vojta, Tom, Eliška,…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Introducing a 3D print model that reimagines the art of typography, providing an innovative way to communicate messages. Our distinct letters, printed at angles, offer a captivating and creative approach to presenting text that you can…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
Multi-purpose storage box, 80x128x30mm, easily holds a D175 POS machine with charger and USB cable. It can also be used to store other things. Print the lid and bottom in PLA with 3 perimeters, and the lock in PET-G Caixa de armazenamento…
Print approx. €0.26–€0.31 excl. taxPreliminary estimate for PETGSource material: PET
I wrote an article with testing results about this: https://www.igorslab.de/en/o11d-hdd-cooler-2 This is a Remix of Thingi 4923606, but made to fit the regular O11 Dynamic and not the XL Version. Two 60x25mm fans fit inside, I suggest…
Print approx. €5.55–€6.79 excl. taxPreliminary estimate for one variant
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.15mm Supports: Support on build plate only For a nicer top surface: Change the Lift Z to 0.1 Top fill pattern: Concentric
Print approx. €2.50–€3.05 excl. taxPreliminary estimate for one variant
After I printed one cardholder for my daughter, she claimed it has the wrong color... In the second approach I asked her for the color an special wishes before I start to print. She also wanted her name on it. So i downloaded the source…
Print approx. €0.58–€0.70 excl. taxPreliminary estimate for PETGSource material: PET
Christmas Krampus Plaque Decoration / Tree Ornament
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Get in the holiday spirit and set the table with these fun coaster fidgets. You can also hang them on the holiday tree if you run a string through the infill mesh. That is if your printer can handle it, the tolerance between the rings is…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
Simple one sided Xmas Ornament with varying heights for multi-colored prints without having MMU. In Prusa Slicer, select “Apply Color change automatically” to add color change breaks at .80 / 1.4 / 2.0 mm (using .20mm slices) and have…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Included the solid and 2-color version with 1 filament change built-in. Print your favorite.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Update May 3rd: Improved Freewheel and Pawls leading to better plunger action & longer coasting. Update May 2nd: Added new STL for Detonator box without text (Not pictured) Amp up your tabletop gameplay with this themed interactive dice…
Print approx. €2.97–€3.63 excl. taxPreliminary estimate for one variant
Happy Christmas
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
Want an easier way to find records in your vinyl record collection? Consider adding a few or several of these letter-labeled dividers, along with tabs for specific bands of your choosing, printed on your Prusa XL Multi-Tool or other large…
Print approx. €3.42–€4.18 excl. taxPreliminary estimate for PETGSource material: PET
Simple hooks for christmas ornaments for quick print and in three sizes - 3, 6 or 9 cm high. Best solution for absence of hooks on christmas day :) Enjoy!
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
MOM & DAD NAME FILP ART 💕 This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/0jIW8AHrOl7 Category: 3D Printing (FDM) FILAMENT: PLA
Print approx. €2.42–€2.95 excl. taxPreliminary estimate for one variant
Removed the name tag from the case and cut the model in upper and lower part to allow it to be printed in 2 colors.
Print approx. €2.86–€3.50 excl. taxPreliminary estimate for one variant
A must have for your holiday decorating! I've added STLs and Mini bgcode for 12 and 24 hooks! There are 2 hooks nested in the small STL, so you can fit as many as you want into a single print on your giant printer bed! Easily change the…
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
I remodeled these to have a translucent backdrop and a white top with a filament switch. They look great on the tree with the see through back. Print instructions I printed this in PLA the backdrop was ZIRO 3D PLA Twinkling Color Series…
Print approx. €0.54–€0.66 excl. taxPreliminary estimate for one variant
20 cm, topper, house number, bookmark, stencil
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Nice name tag, that we use for our wedding. The card holders can be put on the table. We vary the colours, based on the food preferences of each and every guest. Further, I uploaded a sliced version with color change for the Prusa Mini+.…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Ornament You can customize. How to customize with Fusion360 Just download bombka.f3d file and edit sketch with logo. How to customize without Fusion 360 In Your favorite editing software create a cylinder with diameter 100mm and height…
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
This is my entry to the Sindoh Christmas Decorations Spare Parts - Design Challenge . In keeping with the theme I've created spare parts to repair Christmas ornaments. We've all been there. Ornaments that have a lost cap and/or hanger (I…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
Native American Design Elements Santa Skulls 3 Christmas Ornament
Print approx. €9.05–€11.06 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
💂 Introducing the Print-in-Place Nutcracker with Movable Mouth - a festive 3D printing delight that combines the magic of the holidays with the ingenuity of modern technology! 🎁 Prints from head to feet, ready to print without…
Print approx. €1.71–€2.09 excl. taxPreliminary estimate for one variant
20 cm, stencil, bookmark, housenumber, topper
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
This is a large (full print-bed) box made for small tools or whatever you like. It has a working latch and a nameplate holder to keep you informed of the contents. No support is needed and it prints pre-assembled. Updated latch hinge to…
Print approx. €22.13–€27.04 excl. taxPreliminary estimate for one variant
I created this with Runescape players in mind. Looks good in either black, red, or if you're up to date on the game, green. MMU or Palette required
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
one colour / two colours
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
I printed this with Arachne wall generator. The text prints best this way. Other than that, use default settings with a 0.2mm layer height. Swap colors halfway. The sliced file for the Prusa Mini has the filament swap included. Are you…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
This is a The Legend of Zelda themed ornament for your tree. This looks great when printing at .2mm layer height and adding color changes. * The Legend of Zelda is under copyright by Nintendo. This file is created by fan for…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
Here is a blank nameplate template with a custom base that I made to put on an office desk. You can add text to the plate however you like (I included both the STL and a gcode file)
Print approx. €2.37–€2.89 excl. taxPreliminary estimate for one variant
Bonsai pot 24 rectangular ornaments 213x143x50mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
Print approx. €1.31–€1.60 excl. taxPreliminary estimate for one variant
Make the kids work for their candy! Solve the maze to reveal what's inside this tree ornament. There's space inside for a bit of candy or money or other prize. The maze is partially hidden which make it somewhat more difficult to solve.…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Für unser stallinternes Turnier brauchten wir noch einen Pokal für die Hundedisziplin. Da sich nichts geeignetes fand, habe ich den Pokal kurzerhand in Fusion entworfen und anschliessend gedruckt. Das Oberteil habe ich in PLA Gold…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
![Ornament Cap and Hanger - Christmas Spare Parts [Shindo Design Challenge]](https://media.printables.com/media/prints/496290/images/4041262_829f322f-285c-47f9-ae74-f4a91e3f6da7/ornament_on_tree_wtext.jpg)
