Liczymy pasujące modele…
A full set of six unique Christmas tree ornament designs, all designed and optimized to print cleanly and reliably using vase mode, keeping the ornaments light weight, and preventing them from weighing down the branches of your Christmas…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
This large ornament or tabletop decoration (~5" diameter) uses a standard tealight LED candle (38mm diameter) to light it from within. If you have a tealight of a different size, I would scale the model to adjust to it's diameter. Print…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
See my original model . Most of the voronoi deer models were too big to my Kodama Trinus small print bed (120mm). Downscaling them made too thin walls, so I had to take a solid model, downscale and voronize it myself. Should be fine…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
A desktop nameplate, sweeping around in a circle. Customize it to show your name or text. To do that, use the makerworld customizer (fonts are only Arial currently) or install OpenSCAD on your own computer and follow the customizing…
Wydruk około 5,62 €–6,87 € nettoWstępna wycena jednego wariantu
Snowflake Star Wars X-Wing Kit Card This is the perfect companion for the Snowflake TIE Fighter Snowflake Themed Star Wars X Wing Kit Card can be used as a Christmas Tree ornament or as a last minute present. This Kit Card is based on the…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu
A V8 engine block with a top part suitable for holding your business/name card. Test prints were made on a Prusa i3 MK3S and an Anycubic Kobra 2 from PLA with 0.2 mm layer height, 5 % infill density, 190 °C nozzle temperature and 65 °C…
Wydruk około 22,85 €–27,93 € nettoWstępna wycena jednego wariantu
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Wydruk około 8,76 €–10,71 € nettoWstępna wycena jednego wariantu
Christmas ornament by Vlado Turek Print instructions Comeplete Christmas ormanent collection that we have prepared for you. Jo Prusa Deadpool Stormtrooper Cthulhu Jack Skellington Alien Krampus Grinch Optimalized for SLA resin printer…
Wydruk około 10,74 €–13,13 € nettoWstępna wycena jednego wariantu
Nested hearts print in place with no supports for a rotating fidget toy or hanging decoration. Choose with or without a loop for hanging. You can also pop the hearts out and replace them with different colors, by squeezing the outer heart…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Folding Christmas decorations inspired by paper cutouts from school years. Used PLA and PLA+ filaments. Printed on Original Prusa MINI+ with standard PLA preset without any problems. Manual filament change required after the second layer…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
ALERT: If you use letter ‘g’ then change $fn=32 to $fn=15 This is a custom name tag / key ring charm generator using OpenSCAD with Barbie theme. These tags can be used for bags, phone charms, luggages, key chains, etc. Steps to Create a…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Instructions Install OpenSCAD (don't worry it's free and simple) Download NameTagGenerator.scad (below) and open it Edit name variable and then hit F5 followed by F6 (render), finally export the .STL file. Open NameTagGenerator.3mf…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
Quick to print and optimised for 0,4mm nozzle much needed tree hooks every Christmas… Enjoy!!
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 4,03 €–4,93 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Nativity in an Acorn Ornament.
Wydruk około 7,50 €–9,17 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
Death Star Ornament The model comes in a big size, so you can modify it to fit your tree style or use the bottom as a bowl. It was printed in 40% and 50%, it worked great. Once the bowl print is ready I will share the results. There is a…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
This is a mashup of a Snail and Alien Xenomorph we sculpted as I wanted one for my front porch. Use gyroid infill at 5%, drill a 1" hole in the bottom, and fill it with plaster to give it weight so the wind won't take it away. It's a easy…
Wydruk około 20,74 €–25,35 € nettoWstępna wycena jednego wariantu
Oui oui, I have croissants in my Christmas tree! This is one of my first designs I made in Fusion a couple of years ago. And every year people say how cool they think the croissant ornaments are in my Christmas tree 🥐🎄 Size…
Wydruk około 2,18 €–2,67 € nettoWstępna wycena jednego wariantu
I have added color to Vlado Turek 's Chrismas ornament in order to print it on my MK3S/MMU2 using PLA: “Yellow-Green”, Red, White, Yellow and Black.
Wydruk około 10,20 €–12,47 € nettoWstępna wycena jednego wariantu
Some new fireworks are in the sky! Falling stars and such are to be seen! So, we wish you all a Happy New Year already! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was so nice to send us some samples…
Wydruk około 3,63 €–4,43 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ornament hanger for cristmastree
Wydruk około 0,75 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Our new foldable Christmas tree! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Gold The ROSA 3D team was…
Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu
Today’s design continues the holiday theme with another Christmas ornament . This one has a more oval shape and features a spiral pattern made of individual open lines , giving it a see-through, airy look ✨. The ornament prints easily…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
The 2025 Christmas Tree is out! Please let us know what you think of this year's version! And to all of you… Happy Holidays and an Amazing New Year! Used Filament: This model was printed using ROSA 3D PLA-Silk Emerald Green & Gold The…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
About I was looking to buy a MIDI pedal with a good range of motion and a fairly low price (mainly to control virtual instrument's expression/volume while my hands are on the keyboard, and my right leg is on a sustain pedal). I didn't…
Wydruk około 6,03 €–7,37 € nettoWstępna wycena jednego wariantu
Yes, you need supports. Use paint-on supports to create flying buttresses that not only keep the icicles adhered to the bed, they keep the tiny arms of the icicles from breaking. I've provided a screenshot of how they should look. I've…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
You can print this without support. I printed it on the XL but it should be fine on the MK4 or other printers as well. If you scale it down, it's also a nice Christmas ornament. If the hole is too big you can add a modifier in the slicer.…
Wydruk około 2,95 €–3,60 € nettoWstępna wycena jednego wariantu
Change Log V3 Lower light bolt hole moved forward to allow for greater range of motion for lower light Reinforced the slot in the frame that interfaces with the lower headlight mount of the headlight mask. V2 Overhangs improved for more…
Wydruk około 9,61 €–11,74 € nettoWstępna wycena jednego wariantu
Remake of a model from Thingiverse. I made it smaller, thinner and added a chamfer to the outer edge. Print instructions Two color print from the single STL file is done by using a cylinder modifier for the middle area of the model.
Wydruk około 2,51 €–3,07 € nettoWstępna wycena jednego wariantu
Christmas Countdown! Follow Us! To get reminded about our free holiday models (like this one!) we are going to release regularly until Christmas 2022 ! Christmas Stocking Earrings or Ornament The print is scaled to be an earring and can…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
A design i created in Fusion 360 based on a drawing i have seen online. Thickness 20mm Height: 163mm Width: 94mm Print Settings: Layerheight: 0.3mm Infill 10% Top / bottom layers (default): 4 I would modify the postion of the seam to be…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
This is yet another 2020 dumpster fire model. It has colored text and wheels! It's designed to print easily with no supports (all overhangs are ≤30°), and all tolerances are 0.3 mm. If you find that things don't quite fit, try increasing…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
This is a beautiful looking christmas tree ornament, perfect for christmas and winter time. Thank you for your interest! Feel free to share your prints or print files with the community! Design by pmoews, downloaded from Thingiverse here:…
Wydruk około 3,04 €–3,72 € nettoWstępna wycena jednego wariantu
Here's an ornament for your Christmas tree, to commemorate the birth of Jesus Christ. JOY is written in the Asul font, with a nativity scene in place of the O.
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
So you want to know what fan speed is best? You can test optimal print fan speed with this tower. You MUST use newest PrusaSlicer and use the fan speed settings in the photo, slice at 0.2mm layer height. I recommend using a large brim…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu
Ein Schlüsselanhänger mit dem Namen Claudia
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This pin board is heavily inspired by the Mickey Mouse ears pin board by Jerry9245 here (https://www.thingiverse.com/thing:5542138). I created the model myself but used Jerry's method of removing the top/bottom layers to expose the…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Trophy was printed without supports and with 20 % lightning infill. I have added a blank label for your creations. Interchangeable name tags are practical. There are no more winners or losers. According to the results, the players choose…
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Simple ornamental dagger, drawn from scratch in OnShape. Printed on a Prusa Mini (the dagger is 180mm long, rotated 45 degrees, it fits nicely on the bed. Onshape:…
Wydruk około 3,15 €–3,85 € nettoWstępna wycena jednego wariantu
Slider repair kit Fits: DT 790 / DT 797 DT 770 / DT 770 PRO / DT 770 PRO HT DT 880 / DT 880 PRO / DT 880 PRO HT DT 990 / DT 990 PRO HS 200 Dyn / HS 200 Rotor / HS 200 Trend HS 400 MMX 300 UPDATE - 30.10.2022: Some slight fine-tuning.…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) Supports needed Scale it as you like :)
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
infill 20-50% supports no More names are added monthly if your name is not in say what name you would like in comments. happy printing all are unique some are tall and some are short
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0,2 (Recommended) Supports needed Scale it as you like :)
Wydruk około 9,51 €–11,62 € nettoWstępna wycena jednego wariantu
Elevate your winter style with our Snowflake Earrings or Ornament! These intricate snowflakes are designed to be the perfect addition to your festive look. Printed to a size that's ideal for earrings, they can easily be assembled with…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
diameter about 100mm 3mm thick 2mm hole for hanging
Wydruk około 0,85 €–1,04 € nettoWstępna wycena jednego wariantu
Heck yeah! That is how it’s done. I simply cannot believe we pulled that off! Perhaps not the cleanest job, but not bad for a spur of the moment thing. Wait until Saul sees this… Ha! He’ll have smoke coming out of his ears! Yikes, you…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Be aware that the printing parameters reflect for only a half sphere! I recommend not to print the whole thing at once to spare you the trouble of printing unnecessary supports and their removal of it. I recommend to print two half…
Wydruk około 5,34 €–6,53 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4 Layer: 0.2-0.24 (Recommended) No supports needed Scale it as you like :) You can print multi color keychain with a single nozzle (use this video for reference…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
This is a stick of dynamite (32mmx200mm) and a band for making a three-stick bundle. Printing: The dynamite consists of two pieces, the Stick and the Plug. The Plug holds the fuse. Both were printed without supports. The Wrap is a…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introducing a 3D print model that reimagines the art of typography, providing an innovative way to communicate messages. Our distinct letters, printed at angles, offer a captivating and creative approach to presenting text that you can…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
Adapted from wbhinton's name plate to fit the 1510 Peli case. Sketch your letters and/or logo on the face and then raising them by 1mm works well. Print instructions Unassociated tags: Flight Case, Name Plate Category: Sport & Outdoors…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
I wrote an article with testing results about this: https://www.igorslab.de/en/o11d-hdd-cooler-2 This is a Remix of Thingi 4923606, but made to fit the regular O11 Dynamic and not the XL Version. Two 60x25mm fans fit inside, I suggest…
Wydruk około 5,55 €–6,79 € nettoWstępna wycena jednego wariantu
Print Settings Material: Spectrum - Emerald Green Pla Nozzle: 0.4mm Layerheight: 0.15mm Supports: Support on build plate only For a nicer top surface: Change the Lift Z to 0.1 Top fill pattern: Concentric
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
Christmas Krampus Plaque Decoration / Tree Ornament
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
Get in the holiday spirit and set the table with these fun coaster fidgets. You can also hang them on the holiday tree if you run a string through the infill mesh. That is if your printer can handle it, the tolerance between the rings is…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
An earring in the shape of the deathly hallows with an interior spinning Sorcerer's Stone. This model comes in 2 versions, one where the sorcerer's stone moves freely up and down (v1) and one where the sorcerer's stone is prevented from…
Wydruk około 0,82 €–1,00 € nettoWstępna wycena jednego wariantu
Check out the included GCODE for printing 4x ornaments on the Prusa Mini+ Print with red and white PLA, color change at 1.20mm. Easily hung using string or metal ornament hanger. I recommend using these sting hangers from Amazon: 200pcs…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena jednego wariantu
Simple one sided Xmas Ornament with varying heights for multi-colored prints without having MMU. In Prusa Slicer, select “Apply Color change automatically” to add color change breaks at .80 / 1.4 / 2.0 mm (using .20mm slices) and have…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
Included the solid and 2-color version with 1 filament change built-in. Print your favorite.
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
I made this Christmas Ornament for my Christmass tree :). It's pretty easy to print. And sturdy Just use Vase mode. I was printing in on 0.2 layer. You can use brim to hold it better to the build plate Also I uploaded newer version of…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
What does a biker do when he misses his 🚲 in the winter? Prints themed home decorations. 😁❄️ Print one or two – maximum size what fits your 3D printer build plate. Use the bottom surface as the front side. Maintain min. 1 mm thickness –…
Wydruk około 2,63 €–3,22 € nettoWstępna wycena jednego wariantu
Happy Christmas
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Simple hooks for christmas ornaments for quick print and in three sizes - 3, 6 or 9 cm high. Best solution for absence of hooks on christmas day :) Enjoy!
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Use these spooky crocs charms / jibbitz, available with 1250 different first names on your Crocs to customize them! If a name is missing or you need other words, you can easily create the STL using the included OpenSCAD file (See…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
MOM & DAD NAME FILP ART 💕 This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/0jIW8AHrOl7 Category: 3D Printing (FDM) FILAMENT: PLA
Wydruk około 2,42 €–2,95 € nettoWstępna wycena jednego wariantu
Removed the name tag from the case and cut the model in upper and lower part to allow it to be printed in 2 colors.
Wydruk około 2,86 €–3,50 € nettoWstępna wycena jednego wariantu
A must have for your holiday decorating! I've added STLs and Mini bgcode for 12 and 24 hooks! There are 2 hooks nested in the small STL, so you can fit as many as you want into a single print on your giant printer bed! Easily change the…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
20 cm, topper, house number, bookmark, stencil
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Nice name tag, that we use for our wedding. The card holders can be put on the table. We vary the colours, based on the food preferences of each and every guest. Further, I uploaded a sliced version with color change for the Prusa Mini+.…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Ornament You can customize. How to customize with Fusion360 Just download bombka.f3d file and edit sketch with logo. How to customize without Fusion 360 In Your favorite editing software create a cylinder with diameter 100mm and height…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
This is my entry to the Sindoh Christmas Decorations Spare Parts - Design Challenge . In keeping with the theme I've created spare parts to repair Christmas ornaments. We've all been there. Ornaments that have a lost cap and/or hanger (I…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
Native American Design Elements Santa Skulls 3 Christmas Ornament
Wydruk około 9,05 €–11,06 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
💂 Introducing the Print-in-Place Nutcracker with Movable Mouth - a festive 3D printing delight that combines the magic of the holidays with the ingenuity of modern technology! 🎁 Prints from head to feet, ready to print without…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
This is a large (full print-bed) box made for small tools or whatever you like. It has a working latch and a nameplate holder to keep you informed of the contents. No support is needed and it prints pre-assembled. Updated latch hinge to…
Wydruk około 22,13 €–27,04 € nettoWstępna wycena jednego wariantu
I created this with Runescape players in mind. Looks good in either black, red, or if you're up to date on the game, green. MMU or Palette required
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
I printed this with Arachne wall generator. The text prints best this way. Other than that, use default settings with a 0.2mm layer height. Swap colors halfway. The sliced file for the Prusa Mini has the filament swap included. Are you…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Just another Covid Christmas Tree Ornament Covid shape designed by starline / Freepik
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
Here is a blank nameplate template with a custom base that I made to put on an office desk. You can add text to the plate however you like (I included both the STL and a gcode file)
Wydruk około 2,37 €–2,89 € nettoWstępna wycena jednego wariantu
Bonsai pot 24 rectangular ornaments 213x143x50mm, no support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Make the kids work for their candy! Solve the maze to reveal what's inside this tree ornament. There's space inside for a bit of candy or money or other prize. The maze is partially hidden which make it somewhat more difficult to solve.…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Add this wonderful tiny Prusament spool to your Christmas tree to remember everybody how much you love 3D printing. Printing instructions : Pint with a 0.2 or 0.3 resolution and a 20% infill. No support needed. Assembly : Insert the…
Wydruk około 1,64 €–2,00 € nettoWstępna wycena jednego wariantu
Hello. Between my friends, family, and I, along with many people in the world, 2021 has been a ‘Dumpster Fire of a Year’. I did become a dad for the first time this year, but that is pretty much the highlight of my year, when the…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Ukrainian Folk Design Santa Skull Ornament.
Wydruk około 4,37 €–5,34 € nettoWstępna wycena jednego wariantu
The General Dynamics F-16 Fighting Falcon is an American single-engine supersonic multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). Designed as an air superiority day fighter, it…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
I wanted to test the text function in OpenSCAD. This is a small nameplate that I made for my daughter's school desk. My work is all free forever. If you want to support my habit you can keep me caffeinated.…
Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu
Simple name tag stand for wedding table in the form of a base with a heart pattern and two rings. Base and rings are printed separately. The base can be printed in two colours by changing the filament layer by layer (using the M600…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
two colours, 20 cm
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
Peace on Earth Ornament Celebrate the festive season with a meaningful touch by displaying the “Peace on Earth” Ornament. Designed to embody harmony, this all-white, elegant ornament is adorned with the famous saying: Peace on earth and…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
Gatto stilizzato soprammobile o da incollare a parete. Dim: 15cm x 17cm x 2cm
Wydruk około 3,72 €–4,55 € nettoWstępna wycena jednego wariantu
You might have an ornament to commemorate your first Christmas. But do you have one to remember your first global pandemic? Now you can, with an attractive COVID-shaped ornament. This is a three-color ornament, printable with or without a…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
![Ornament Cap and Hanger - Christmas Spare Parts [Shindo Design Challenge]](https://media.printables.com/media/prints/496290/images/4041262_829f322f-285c-47f9-ae74-f4a91e3f6da7/ornament_on_tree_wtext.jpg)
