Counting matching models…
The knife has a functional bearing. To assemble the knife you need 4x toothpicks and 12x airsoft BBs.
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
A sci-fi cubic plant pot or planter for your plants. The design is inspired by the amazing Subnautica series! Mainly by the Precursor structures. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
Subnautica Alterra logo dual color.
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
Špachtle pro očištění tiskové plochy
The Cuddlefish model is from Foppemoa's Subnautica Cuddlefish and it is heavily modified in Blender. Printing Suggestions I suggest a very low layer height to maintain the detail and to get a nice finish on the print. I used a varying…
Print approx. €0.49–€0.60 excl. taxPreliminary estimate for one variant
Nautical themed coasters set of 4. Too bad I missed the contest. I used some left over insulation foam for feet. I recommend not using anything thicker than about 1.5mm, as the coasters will start to sit proud of the holder. The models…
Print approx. €0.28–€0.35 excl. taxPreliminary estimate for one variant
Use this blueprint in your fabricator, along with 1 unit of silicone rubber and 1 unit of titanium. But seriously... Print one half and then mirror it and print the other half. Each half is split into 4 pieces, so you can print it with…
This is a 3d model of the cyclops submarine seen in Subnautica. It was designed to be assembled as a kit, however since I have very limited experience with making printed parts fit, some glue could be required (I used some for several…
What about making something light and buoyant that is actually a nautical symbol of something that is heavy and certainly not meant to float ☺ I designed an anchor to be used as a float / buoy for your boat keys. When going out on a sunny…
A NON_lethal replica of the knife from the video game subnautica and subnautica;below zero Category: 3D Printing
My attempt to reproduce a knife similar to the one in Subnautica (rights of Unknown Worlds Entertainment), with a hexagonal handle pattern. The blades and part of the handle were printed in Silk PLA and the rest in TPU. It is also useful…
This model is designed for 320mm or larger printers. It can be printed at a smaller size, but you may need to drill out the screw holes if they're too small. When printed at 100%, the two main sections can be assembled using 4 x brass…
Printing with supports is a necessity for this model, the size in which the model will be the best in the size of the palm, the best I think will look from Neon green Prusament 🙂 so let it print 🥰
I did not make this and I respect the designer.
Update: I've made a new version of each body, which supports 7mm googly eyes. I exported the model for the Cuddlefish from Subnautica, and modified it to use the modular ball-joint arms (from 3DCentralVA and Ellindsey ). Though the arms…
Portal from Subnautica. Designed in Fusion 360. File with supports (for resin printers) and F3D file attached. Update - 2022-01-05 Fixed wrong Ion Cube pattern extrusion Update - 2021-12-27 Made pattern depths changeble (Fusion 360 file)…
Exosuit based on the game Subnautica (console/pc)
In English: Model Cyclops from Subnautica. There are three types of models of Cyclops itself. 1. Cyclops_with_cockpit is a Cyclops with the original cockpit. 2. Cyslops_whitout_cocpit is a Cyclops with the cockpit removed for ease of…
Łatwa w wydruku knaga do mocowania liny. Dzięki swojemu prostemu i funkcjonalnemu designowi, idealnie wpasowuje się w różne wnętrza, zapewniając jednocześnie bezpieczeństwo i łatwość użytkowania. Element ten może być przymocowany do…
biggest submarine from subnautica
data tablets from subnautica
My first "finished" full body creature. Took me about 2 days to finish. I tried to add more detail, but my computer isn't that fast at processing a lot of things in a given time. Because of that, I can't repair the model. Update #1…
its the knife from subnautica but now dummy 13's can hold it! like for the model I created of Ryley Robinson (subnautica player) https://unknownworlds.com/en
Helm wheel extruder visualizer. Attach with 6x2mm magnet. Print instructions Printed shaft-side down with supports to maintain the detail on the front surface.
The tablet is made up of two parts - body and symbol. They are two different files for the purpose of printing them in different colors. There is also a version without the letters for printers that have a problem with smaller details.…
not 100% accurate in the least, but i had to model this real quick so i could get back to playing the game. split for printing and color separated for the most part. axe head is designed to swivel in and out, tried to make a locking thing…
A functional prop inspired by the look of the Advanced Wiring Kit item from Subnautica. Printing Instructions No supports are required. All pieces can be printed with lightning infill. Glue is recommended but most of the pieces, aside…
Model of the gargy from subnautica.
Decorative obelisk found scattered around areas where Precursors had been working. Tree supports are recommended. The two-piece version uses less support material and can be glued together.
Prints without supports but make sure to turn down the speed on overhangs - the largest piece has a challenging overhang. Use CA glue to assemble. Some sanding may be needed where the lower 2 pieces fit together, especially if your first…
the stasis rifle form subnautica took me about 2 days of work to fully make it i would personaly scale it to 300% but its up to you but 300 worked for me would also recomend making a knife to it so you got the leviathan slayer pack 3000 :D
model of lifepod5 from subnautica
if you need to edit something on the model, write to [email protected], if you don't want to redo it completely, I'll do it for free
Nautical Ocean Sailboat Wall Art
Nautical wheel extruder knob/visualizer that I made with the help of the SV06 files provided by Sovol. Just having some fun learning Blender and upgrading my new printer! I printed at 0.2mm layer height with organic supports, but I think…
Prints without supports but make sure to turn down the speed on overhangs - the two largest pieces have challenging overhangs. Use CA glue to assemble. Some sanding may be needed where the lower 2 pieces fit together, especially if your…
This panel has screw holes on all 4 sides so that it can be hung in 4 different orientations. There are several different tile designs that are used throughout the QEP, but this is one of the most interesting and most frequently used…
its the knife from subnautica (well i tried at least)
Tested as small as 50%. At smaller sizes the tabs can break off more easily. Flexible filaments will be able to go smaller than brittle ones. At 50% (as pictured,) a USB cable can easily be fed through.
When i was looking for a seaglide to make for my brother I couldn't find any that i liked. So i took it into my own hands and designed one. I will hopefully down the line make a multi colored one soon. Printer: Ankermake M5 Filament:…
Hello, I have recreated a small starter base in SubNautica. This model will be perfect to print and place in your fishtank.
No Sew Button! This button is nautical themed with embossed compass rose . Rope detail on outer edge of button also adds grip texture (nice!) The button requires no sewing. Comes in 3 sizes! (1" [40 Lingne], ¾" [30 Ligne], ½"[20 Lingne].…
I modeled the Enkei Aeronautics in a 1:10 scale with a 12mm hex for Tamiya-M chassis cars. I suggest printing them face up with supports turned on everywhere. I printed mine with a 0.25mm nozzle and variable layer height (0.15 for the…
This panel has screw holes on all 4 sides so that it can be hung in 4 different orientations.
A decorative planter/decoration for aquariums. For those that haven't played Subnautica: Below Zero, this model is based off the “Vent Garden” from that game:) That's a building-sized jellyfish that anchors on the sea floor above a…
Hood to mount most LEDs strips. The channel angled with a slight lip to prevent direct light shining outwards. Allows you to route between the Alpha on the left to the Bravo to the right. Included the one piece hoods and the 4 piece hoods…
This is a zoom gear for use on a Tokina 10-17 lens on a Nautucam housing. It requires a M3 hex bolt and nut to secure the gear to the lens. NOTE: You must remove the rubber cover from the lens ring before installation, the same as you…
This is a challenging print. For best results use organic supports, making sure that the Branch Angle is set to a high enough value that the overhangs get fully supported all the way around . A branch angle of 60 degrees seems to work…
This is a focus gear for use on a Nauticam housing with a Canon 100 USM macro lens. It requires a 3mm hex bolt and nut to secure the gear to the lens. Print instructions Category: Camera Summary This is a focus gear for use on a Nauticam…
This model can be tricky to print and assemble because of the fragile corners of the “shell” piece. At 100% this model will be fairly large. It can be printed as small as 50% (pictured) but it is more difficult to build at that size…
This is a Topographical Map 3MF File I made from the Subnautica 1 map. I've included the PNG in case anyone wants to tweak with their own settings. I initially came up with the idea when looking at Subnautica themed posters and wall art.…
Inspired by classic maritime lore, this Mermaid Ship Figurehead model captures the elegance and symbolism of traditional wooden prow carvings. Sculpted with a graceful posture and flowing tail, the mermaid emerges from ornate wave-like…
Meet the Nautical Fish Tray — a charming and elegant serving tray inspired by the gentle rhythms of the sea. Crafted with a soft matte blue finish, this tray features a subtle embossed fish pattern that brings a breath of ocean breeze…
Nautical star cookie cutter, looks very nice on glazed biscuits. Print Settings Supports: No Post-Printing I like to blow torch over my cookie cutters briefly to melt away any loose bits of plastic/stringing and seal the ends of the…
Bring the terror of the deep ocean to your desk! This is a 3D printable collectible statue inspired by the iconic Reaper Leviathan from the game Subnautica . The model has been optimized for easier 3D printing by lowering the creature's…
The Classic Ship Anchor Sculpture captures the timeless symbol of maritime exploration and seafaring adventure. The anchor rests on a rocky seabed base surrounded by flowing water, creating the impression that it has just settled beneath…
Articulated Reaper Leviathan print files here: https://makerworld.com/en/models/572246 I designed this as a way for people to give away prints of MagniModels Articulated Reaper Leviathan in a cute and cool way! It also can be used as a…
https://unknownworlds.com/en
If you put the handy Nauticam Bayonet mount on your housing to use the CMC lens or the WWL lens you'll find that the lens cap will no longer work, so this one will go on the bayonet mount. For best results I printed the bottom 6.88 mm at…
this is a stasis rifle for specificly for my ryley Robinson dummy 13 or your own!
I have an ongoing project of making the open, red rings for my Enkei Aeronautics, I'm currently driving them with the flat centercaps but lost one, so I decided to replicate those as well. There is the flat version to print with the flat…
Floating knot inspired by the "monkey fist knot". Perfect for boating to add as a keychain. Never lose your keys!
this includes the forearms and the hand so yeah you cant separate them or else it gonna ruin the print or build.I made v2 because the forearm and hand did not align so I aligned it. should've checked it earlier 🫡
Several nautical theme models that were designed for baby shower decor. Each comes in two sizes with available bases for keeping them upright.
Print-tested at: Printer: Bambu Lab A1 Mini (FDM) Filament: eSun PLA+ Layer height: 0.08 mm (fine detail) Nozzle: 0.2 mm Supports: Minimal, auto-generated — works upright with small touchpoints only Z-height: 65 mm Orientation: Print…
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
Fan art 3D models of characters from the game Subnautica. These models are created in a stylized form and are great both as collectibles and as decoration. Perfect for fans of the game or anyone looking for a nice print project
About to head to the beach, going to make these as fridge magnets. Didn't have time to add magnet holes so will just use hotglue or sticky magnets. Category: Art
Remix of this great model: https://www.thingiverse.com/thing:4868143 But I removed the big steering wheel in Meshmixer. My Frostgrave doesnt have a harbour.
This is a monster in a game named subnautica
this dummy 13 is the player from subnautica feel free to download and print, ill make accessories soon! like the stasis rifle and the knife and more! also this model doesn't include the whole dummy 13 so you have to download the dummy 13…
This a holder/flip for Nauticam Macro port and 2 different INON diopters. Features sunken nut casings. The diopter holders are customized for those I have. There is no guarantee that they fit for you. I highly recommend that you go to…
6 Digit version of the PropWash Sim radio kit, may work with the Logitech yoke, not been tested. Only works with the 6-digit version of the kit, and only supports 1 display. Buy the required kit here:…
EDIT 03/07/2024 - Three additional designs added. Six drink coaster designs for Embry-Riddle Aeronautical University. All six designs are available as MMU prints and four of them are also available as layered color change prints. Layer…
This keychain is from the game Subnautica. It acted as a key to the main alien door.
This detailed nautical anchor sculpture features a realistic weathered and rusted finish, capturing the rugged character of aged maritime metal. The corroded surface texture and worn edges give the piece an authentic sea-worn appearance,…
dont worry I didnt copy look here is proof I just made it more like low poly I don't know the size so tell me if its too small https://unknownworlds.com/en
prawn attaches to module
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
INFO A colored version of the original Cyclops model by Joshua Keunecke for multicolor printing. All Credit goes to him. The model in the images was printed on a Snapmaker U1 sliced with Orca Slicer. I have set up my own profile for the…
Simple zoom focus for 60mm macro lens
You do not need CFS or AMS for this print or any of my other prints. Add a pause on the correct level and change the filament. Then continue on. You can resize but not the height. Design Concept This nautical clock features a compass…
Prawn suit from the video game Subnautica
I made some replacement rings for the Enkei Aeronautics EK84/HeroesRacing iSpeed. They're not 100% accurate to the original ones, for example the centercaps should have some writing on them but it's so tiny and thus hard to recreate with…
I bet no-one is gonna need the pda fr but still I made it also I will give you a hint on what I am working on A ARTICULATED robot... maybe the sea moth or the ... IF WE GET 50 DOWNLOADS IM RELEASING THE ARTICULATED PRAWN SUIT
This sea captain bust presents a strong nautical character with a focus on texture and expression. The sculpt features a weathered face, flowing beard, and traditional captain’s attire, framed by thick rope details that reinforce the…
The Nautical Rainbow is a kinetic art piece designed to bring color and movement to any space. Inspired by a classic ship’s wheel, this wind chime features a series of cascading paddles that dance in the breeze. The assembly uses a "notch…
Ornament for the ring door camera. R2D2 with ship's wheel handles on its head. Comes with mounting plate. Category: Decor
from subnautica https://subnautica.com/en remixed from lazy guy on maker world https://makerworld.com/en/@lazy_guy I tried making it but I couldnt, it failed really badly so I tinkered his model also please dont report me I dont want to…
This focus ring is for Nauticam diving case and Panasonic 45mm macro lens.
A nautical mine template for an unofficial water-war conversion of Gaslands that I'm unironically referring to as BOATLANDS. I have other boats in my Gaslands Collection here on Thingiverse. Use them according to the standard rules of…
