Counting matching models…
Lots of fun with a bubble straw that produces a ton of bubbles for the kids. Use: Make sure the tip of the straw is submerged in the bubble solution for best performance. See the photo with the red line. I've included the .3MF that uses…
News 2024-03-17: My newest whistle design, a Long Range Dog Whistle at 7,000 Hz . Please download here . News 2024-01-21: I designed an ultrasonic dog whistle with an even higher pitch of 23 kHz , which you can download here . Update…
A set of printable concrete barriers with a little gothic twist. Four different levels of battle damage to mix things up. Perfect for 28mm and heroic scale wargaming. Dimensions: Height: 24.5mm Width: 24.5mm Lenght: 50mm FDM friendly and…
A set of printable tall concrete barriers with a little gothic twist. These are high enough to obscure most Heroic -scale infantry models. Four different levels of battle damage to mix things up. Perfect for 28mm and heroic scale…
Here is Fallout NCR Ranger Helmet Mask. Print instructions Category: 3D Printing
Introducing the FDM (Fixum Dude Motors) print in place concrete truck. The wheels and the concrete mixing drum rotate right off the build plate. V2 has newer stronger axles. Find the entire FDM Vehicle Collection here:…
If you create BambuSlicer profiles feel free to add them here: https://makerworld.com/en/models/221534 I designed a flower pot with a separate lower half to collect excess water. The parts can be printed in different materials and mixed…
Collection of multiple fantasy characters in multiple poses, most do require support.
Modular Concrete Hydroponic Tower - Spiral Mold System (BETA) ❤ Support the Creator / A Special Request If you love this design and want to see more ambitious and complex projects like this come to life, please consider purchasing the…
These are CAMLOCK compatable nozzles from 20mm to 80mm (in 0.5 mm increments). They are compatable with the awesome and award winning CAMLOCK Connector by @peterh . Hints: You may want to flip the prints to have the wider diamater ends on…
A set of printable anti-tank obstacles with a little gothic twist. Four different levels of battle damage to mix things up. Perfect for 28mm or heroic scale wargaming. Dimensions: Height: 24mm Width: 22.8 mm / 24mm FDM friendly and…
The Pico 4 is better in almost anyway than the Quest, it is lighter, better balanced, and has a higher FOV out of the box than I have been able to get with any facial interface for the Quest. The only thing the Quest does better is…
I made this uncrustable maker because my uncrustable packs would always go away too fast. Unfortunately now my bread goes away too fast. PETG filament is known to be the safest choice when dealing with food and kitchenware. It also…
First and foremost: Thanks @ David Kingsman for providing us with such a neat clock model! Myself and everyone else I showed it to really liked this fresh design! Sadly I ran into multiple clearance issues while assembling the parts…
This is barrier mold for fingerboarding. Doing it yourself is better option than buying it from internet for like 20$. My settings and material: PETG 15% infill 0,20mm layer height 3 wall loops To hold 2 parts of mold i used clamp 1 or 2…
This spiral design is inspired by other pots online, and the casting idea is based off a YouTube video I saw. You can print the pot itself and use it as is. If you want to cast this out of concrete or plaster, then you need to print out…
Square flower pot concrete form mold
The real thing: https://www.youtube.com/watch?v=rHfkeAuvooY Update: New youtube link Update: includes a .stp file of the base block and form, and allowed remixes in the license of the model, so you can modify the design for your block…
UPDATE 13.12.2022 Added air vents to the gasket, they are designed in a way so its impossible for light to get in. The active cooling on the Pico4 itself is awesome but when the face gasket sits perfectly on your face with the hot air…
Une ancre de bateau pirate avec sa chaine pour agrémenter le décor de votre aquarium. 2 fichier présenté afin de facitité l'impression. Celle donnant de meilleur résultat est l'ancre avec la chaine droite à imprimer en vertical.…
This is a calibration strip I have started using. It is similar to other notched strips except I have modified the g-code to automatically increment though a range of live-Z offsets. It starts printing at +0.1mm above the live-Z setting…
Put it on your table or make it mobile by using 4x lorenkrampe to mount it on G scale log car wheelbase ( https://www.printables.com/de/model/335862-log-car ) How to build it: Put gestell2 into the slots of gestell1. Push Schwenktrieb…
Round flower pot concrete form mold
This model is one from my extensive Children's Toys Collection . The large round marble maze is a fun handheld fidget toy and a small challenge for patient fingers. The goal is simple: guide a marble through the maze until it reaches the…
Mold for fishing concrete weight, into which you pour concrete. Forms must be printed mirrored (add one file to Slicer and one mirrored). Connection is screw through holes.
This gives you a faceplate that can increase FOV and give you that peripheral vision like a Quest Pro. I prefer this “open” design and many others do too. You will have to use a bit of velcro tape and source your own pad. Recommend…
Big thanks and compliments to the original designer! @StoererHauptquartier On my printer the Rotor fused and locked in place. Seems a pretty common issue. This remix opens the clearance by 50%. I printed this on MK4S 0.40 nozzle and 0.10…
Hello ! Wellcome to my little office with Prusa MINI +. I made industrial lamp with concrete base, retro bulb and soft pad made of recycled rubber. O.10 DETAIL Prusament PLA No supports 15% We will need: Concrete (fine concrete with small…
Update: 6x2 (240x80x80 cm) and 3x2 (120x80x80 cm) blocks added. These are the actual block models that I used to create my concrete casting forms (see also https://www.printables.com/model/234938-scale-interlocking-concrete-block-form) I…
ATTENTION: PRINT THIS TEMPLATE UPSIDE DOWN FOR BETTER RESULTS MY PRINT SETTING: -Nozzle 0,40mm -Layer 0,08mm -Infill 5% -Support auto tree
HO Scale Model Railroad Concrete Barriers with a few different designs and lengths. Also known as Jersey barriers.
Concrete or gypsum. Use zip ties for tightening or something else. 2 versions : HOLES/NO HOLES
I designed this mold for casting a 10 by 10 cm and 20 cm high wallmounted contrete lamp. I added a version for reusing the casing and a version for onetime use only. To be honest, I never tried the reusable one, so if it sucks or doesn't…
Approximately life-size pancreas model. Created in Fusion 360 and Meshmixer. Needs supports to print, model is in suggested orientation.
Consider food safety: https://blog.prusa3d.com/how-to-make-food-grade-3d-printed-models_40666/ The ones in the photos are made with Franz Buttermilk bread. Recommend compressing the sandwich by hand before using the press.
When I thought of the Incredible Hulk, the first thing that came to mind was HULK SMASH! Smashing his fists down really captures the look I was going for but try not to smash your cup down on the coaster! Part of my Marvel's Avengers…
This is my first try at creating a mold for a concrete pot. It is almost the largest mold you can make with the Prusa I3. You need to use a mold release. You can get special concrete mold release, or you can use most of a can of non-stick…
A tolerance test to see if you can print bearings. Most of my bearings are 0.2mm tolerances because thats what seems to work best. This test is incremental by 0.02 and based on my round test. UPDATE: Added an attempt at a model with some…
I wanted a sandwich press that crimped the bread on both side, and had a built in cutter. You could just print the sealer and cutter, and not use the base. but the base crimped the bottom side, and makes cutting easier
Are you an artist who struggles to draw circles between 10 and 70 mm in diameter? Well, I'm not, but you're in exactly the right place. Even if you're not an artist, this plotting compass is a very fun make. Similar designs retail for…
Fun little building block toys ive added a fuzzy skin(0,2m) layer to it. obviously if your downloading the step file do as you please. we would love the support please so give us a click and a like 3dealitydesigns
Personally, this is my favorite spinning balancing bird model as it looks clean and is easy to print. Print upright with supports (raft/brim recommended) . Birdwithcavity STL file allows you to hot glue a counterweight like a coin into…
The most common modular concrete fence in the USSR and Russia, which became a visual symbol and brought fame to its author - Boris Lakhman. File in scale 1:100. Print instructions Supports: No Resolution: 0.2 Infill: 30 Notes: For greater…
CZ: Technické specifikace a instrukce Materiál: PETG Výška vrstvy: 0,2 mm Výplň: 15 % Vnitřní formu lze tisknout z TPU pro snadnější vyjmutí z betonu Výška pro pauzu tisku pro vložení matic: Vnější forma: 13,45 mm a 132,05 mm Vnitřní…
Introduction A few years ago @HexiBase_264072 built several versions of a 3D printed subwoofer using the Tang Band W3-1876S 3" driver. These designs take a very long time to print though, so I made a version of his design that is hollow…
This is a reusable 3D printable mold designed for casting 250g fishing sinkers from concrete. Ideal for anglers looking for an eco-friendly and cost-effective alternative to lead sinkers. The mold is easy to print and use, and it can be…
Loved Jeff's original, decided I needed room for two tracks - and curves, so re-modeled from scratch based on Jeff's basic design. Fusion file allows end of curved span to be dragged to change length and shape of curve. Print Settings…
Info: I like original vase (thanks @Riskable !) I just wanted larger base area (which is touching the ground) so I increased dynamically this part → increased stability of the vase Size: note that default 100% size is quite small, so I…
Elastic Girl! Tuto kočku z animáků jsem vytvořil podle jednoho obrázku , takže nevím jestli přesně odpovídá originálu(na pohádky jsem už starý :) ). Chtěl sem ji udělat aby šla tisknout bez podpory , ale ta děvčica má krásné štíhlé nohy…
The model is inspired by modern real-world Jersey barriers and focuses on clean geometry, realistic proportions and easy integration into different layouts. The barrier is modular , allowing you to print and place multiple segments side…
The dovetails could use some optimization, but it works. They disable the need for supports when printing. I use 6 balls under my granite slab just to give some extra support in the back since I have my spool on the printer (and I had 2…
How to do it! Subscribe! LINKS/ENLACES: Magnets/Imanes: https://s.click.aliexpress.com/e/_op0Pxx4 FILAMENT/FILAMENTO: Flex filament 3DFils: https://goo.gl/UFB2cr Red PLA Tianse/PLA rojo de Tianse Grey PLA BQ/PLA gris claro BQ Copper PLA…
This is a simple tool for making your own sealed sandwiches commonly known as Uncrustables. Print instructions Operating Instructions Take your bread, add your filling in a small dollop in the center and add other piece of bread. be sure…
I included a scaled up version in the files. It's scaled so the base is roughly the same size as titancraft's number tokens (https://www.thingiverse.com/thing:815489).
I needed a spacer for the reinforcement of my ring beam. It is designed for a 9mm rebar and provides a spacing of 25mm.
I wanted to model a somewhat cartoonish version of a concrete/cement mixing truck. They're my favorite kind of trucks. FEATURES: Fully printed bearing wheels (they are very loose but they roll and spin!) Handle for spinning the barrel…
This is a 1:48 scale version of the classic 8in by 8in by 16in Cinder Block, so called because they were originally made from compressed cinders, common byproducts from burning coal. These are now typically known as Concrete Masonry…
After looking around and only finding masks that weren't quite what I was looking for or stuck behind pay-walls I figured I'd take a shot at remixing and making my own that would allow someone to breath while wearing it. Remix of : This…
Cute Incredible Hulk Figurine
A friend of mine asked me to print some Carrera barriers he found on the web, but I did not really like the proportions and so I made my own! Since I made them for my friend I unfortunately don't have pictures yet mounted on the track.…
Designed for the Syncros RR2.0 stem. Maybe also compatible with the RR1.5 stem since the stems are cross compatible. The design is modular. The M3 holes for mounting the Garmin quarte turn mount to the arm are spaced 20mm apart. If the…
They're building blocks! Instructions : Print at 0.2mm with 0% infill. Let your imagination run wild! Tips : Tolerances will vary between blocks and connectors depending on the filament used. I suggest printing the connectors with a few…
Gemini said Sure! Here is the English version of the description, using professional terminology to highlight the engineering value of your project. High-Performance 3D Printed Concrete Mold – Engineered for Precision Take your production…
my take on the incredibels robot. the version you see in the pictures is a bit changed, i decreast the feel size to get better proportions. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Notes: on the body…
Need a flawless 3d print of this? Visit https://muckychris.com/collections/buddhas introducing the Original Muckychris 3D Printed Pop-Culture Buddha Statue: A Fusion of Art, Technology, and Nostalgia. Celebrating more than 15 years of the…
printed at 100% fits 1/16 scale or resize in your slicer to fit desired scale. Print upright. Upload your makes, i would love to see them.
This is a scaled model per precast industry standards. All of these models have been optimized for 0.25mm nozzle printed vertically. 6ft Inside Diameter: The real-life size is 6'-0" inside diameter x 12'-7.5" long with a total lay length…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Compatible with M3*8 screws with a spring washer and washer. Uses M3 screws for every hole I printed mine without supports or rafts. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
A concrete-like planter with the monstera plant. Small home decoration in Modern-Brutal style. Monstera leaves after print should be heated in warm water and quickly molded in hands. Commercial use: To sell prints of this and my other…
Here is a simple concrete/Jersey barrier, prints well with FDM or resin. Its scale 8ft long, available in Z (1:220), N (1:160), HO (1:87), S (1:64) and O (1:48) scales. Updated 8/23/2024: Added Z and S Scales. [1-220, 1-160, 1-87, 1-64,…
These are molds for creating a set of dumbbells out of concrete. Weights ranging from 7 to 48 lbs are possible. The larger weights will require a large format printer to print. The process to create a dumbbell is: Print the four parts:…
A little mold to make 1/18 scale K-Rail (or jersey barrier). Cheap to print so you can mold multiple at a time. much less costly than doing silicone molds i use PAM as my release agent and usually cast these in CementAll non-shrink grout…
This set of scale-accurate, stackable concrete blocks brings industrial realism to your N scale model railroad or diorama. The blocks are inspired by real-world modular systems used for silos, retaining walls, sound barriers, and more.…
I had a slight issue printing the original one as the threading would not fit my strain relief so I quickly increased the tolerances and now the PG7 fits well.
Just an Incredible Mask! I printed it flat in flex and looks great. You can also print it in PLA and it can be molded with hot water or a hair drier to make it more ergonomic. 2 models, one with holes on the sides and another one solid.…
Need a flawless 3d print of this? Visit https://muckychris.com/collections/buddhas introducing the Original Muckychris 3D Printed Pop-Culture Buddha Statue: A Fusion of Art, Technology, and Nostalgia. Celebrating more than 15 years of the…
This is a pair of simple brackets to mount an Incra miter gauge on a wall or other surface. I use two of the normal sized mounts on the outside along with a single one of the shorter mount positioned so that it gets in the way of the…
Model of concrete sewage pipe with 1 m diameter (1000 dm) in H0 scale (1:87). No supports needed. Print standing up, but probably needs a brim as the contact area is very small.
I tried to create my project of a rather popular model. Here is the result...
I liked the design so I drew this plug up for fun. I have mounted a small cabinet with two of these. However, they are not certified and I can't take any responsibility for using these. Use them at your own discretion. Brim included in…
I printed mine with PETG at 0.2mm layers for the outside pieces and 0.1mm layers for the top cap and small detail pieces (had a couple of layer shifts on mine, printed again for a friend and it came out great). Printed on my Mk4. I…
Concrete Road Block and Mold
Achieve perfectly level floors with these 3D-printable self-leveling floor pegs! Designed for concrete, these pegs help ensure a consistent and accurate surface height. Features: Three sizes included – 3cm, 6cm, and 8cm height options for…
Edited cover for the SV06 ACE. The cover is opened up and makes the stock fan a little quieter. I printed in PLA black with 0.4mm nozzle and supports. This is a rework of the original SOVOL SV06 ACE model from SOVOL's github.
I build a Diorama with an IDF tank. And I needed the concrete wall pieces. So I decided to create some by myself. The scale is 1/35. But I found only measurements to the height… All other numbers are made to look “harmonic”.
Just a modified version on DGA's model.
Fallout NCR helmet and mask. Modified this and used the reference parts to remove the helmet in order to use an actual ww2 American M1 military liner.
1:48 Scale Concrete Barrier based on dimensions from the US Department of Transportation Federal Highway Administration.
I took a liking to this wheel case, and decided I'd correct the primary complaint other people had - the thin walls affecting printability. Print settings are the same as Jacob's original project, I would perhaps suggest using PCTG, as…
It comes apart in 3 shells and 1 core (which I had to whack with a hammer quite alot). I also modified the bayonette attachment to accomodate my bulb and fit together with the concrete base. STEP files for lamp mount are attached. When I…
If blobs are seen on the strings between the posts, the filament is definitely wet. Strings are ok as long as they are smooth and fine.
A classic wall from the eastern block, made for games like Fallout, Mutants: Zone Wars, This is not a test, Last Days, Zona Alfa and others. Make as many you need and link them together, hopefully the will hold better than the Soviet…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Start by following the steps/using the original gcode from jkoether : https://www.printables.com/model/360303-auto-incrementing-first-layer-calibration . Once you have chosen the best live-z setting using his original gcode, then use the…
Print with support on built plate only and MMU or use latter acricil painting. After print connect together fin to the orca body. I used Z=0,3 infill 10% support pattern spacing =5
Keep Your Filament Tidy – Now Stronger Than Ever (V3) An improved, compact, and user-friendly clip designed to secure filament ends on spools—preventing unwinding and tangling. Now in Version 3 , featuring thicker walls for enhanced…
