Counting matching models…
Slides and locks in place. Attach this adapter to whatever you want, with 3 options provided: 2xM4 countersunk screws 2xM4*6 inserts double sided tape Additionally, add a M4 threaded hole, 7mm away from top center of this piece (to your…
Using the odder reducing diaper trash can systems offered by Tommee Tippee you are facing a lot of costs for the refills. Or you can get a refill for Angelcare/Closer to nature/ Sangenic nappy bin cassettes (…
Holder for the Ingenico ISMP4 payment card terminal The holder can be fixed to a phone case, ipad / tablet case or other surface where the terminal is needed. In this use case a waiter will have the Ingenico ISMP 4 holder where mounted to…
Remixed the original excellent design for the board I just received There were 3 changes to accommodate the newer style NVR board: 1. Moved the 3.5mm jack and RJ45 down further 2. Made the case wider so the RJ45 wouldn't run into the…
Wall mounts for Ngenic Tune controller and indoor sensor. On the mount for the controller there is a compartment for the recovery plug.
Please be aware that here are mulitple variants of the board with slightly different layout of ports. You might need to adjust included OpenSCAD file to match your hardware and regenerate STL files from it.
It's a development of a legacy model fitted to new PCB and ports layout. I include two cutouts that will let you fit-test the board without spending much time and plastic on printing the full model. To mount the NVR board to the bottom…
Print with top side down. Use: Supports 3 perimeters (walls)
This is an enclosure I designed for housing an Ingenic "15$ NVR board" + SSD drive. There is another model out there that is organized more flat, whereas this one positions the drive above the board vertically. I place 3 M4 screw holes to…
We bought the wrong refill cassettes for our Tommee Tippee Sangenic model. This model clicks over the rotating ring of the Sangenic Tec and hooks into the indentations of the refill cassette, so it can be rotated.
Attach the board with two M3 screws. The slot for a drive fits a 2.5" sata drive, the slot is 13mm tall. If you are concerned about shorting things out you can add rubber feet to the bottom to protect the bottom of the board. Prints in…
A compact enclosure for the Ingenic A1 NVR board (NG variant, 130 x 50 mm) with a 2.5 inch SATA SSD mounted above it. ## Why it is smaller The original lays the board and the drive side by side, so more than half the footprint is empty…
Slides and locks in place. Attach this adapter to whatever you want, with 3 options provided: 2xM4 countersunk screws 2xM4*6 inserts double sided tape Additionally, add a M4 threaded hole, 7mm away from top center of this piece (to your…
