Counting matching models…
This nipper cutter holder is great for storing the nippers that came with your 3D printer! I added a closed tip onto Muh60's nipper cutter holder model to enclose the nipper blade for better safety. I used OpenSCAD to modify the original…
2x2 version of Zack's nipper holder with the angle of the holders tweaked so they fit inside a 2x2 square. If you have long tools they will still stick out of the 2x2 area but not nearly as much as in the original (which works better in…
Gridfinity is the ultimate organizer for your whole workshop! Learn more at https://www.youtube.com/watch?v=ra_9zU-mnl8 Find more Gridfinity accessories at https://bit.ly/3E2NxnZ Parametric source files: Nipper Holder:…
Simple, space efficient storage solution for small pliers/nippers/cutters/strippers used in electronics. Two standard bins in the files, one fits up to 6 pliers with a grip thickness of up to 11.5mm (the right one in the photos) and…
This one is just a little bit smaller than the original one. It holds the nipper better. If it doesn't fit the nipper, you could first warm up the walls with a lighter. From my experience, it creates the best fit. Category: Tool Holders &…
Maybe you're like me and don't have enough tools, and so printing the full sized version seemed like overkill. Here's a 2x2 version instead for holding only three nippers/clippers. If I need more I'll just print another. Recommend adding…
Hi Everybody, i tried the parametric fusion360 model for the 2x2 version but the rear wall had some errors. I shortened the first slot via parameter "sketch 6 -> linear dimenson-2/d144" from 17 to 14 mm. Printed on Sidewinder X1 in 0.4…
This is inspired by the dozens of horizontal plier racks for gridfinity. This design has the following improvements: Wider slots (6 in a 3x vs 7) Shorter at 4x vs 5x Top lip which holds spring loaded pliers and nippers in a more compact…
This is a Knipex Super Knips holder for an Ikea Skadis pegboard. I remixed mweisshaupt's holder by adding internal holes to use CSD_Salzburg's Skadis Universal Hook (https://www.thingiverse.com/thing:2853257). Fusion360 file is included…
Hold 5 tools in a 2x3 gridfinity grid. This is a remix of the original design, reduced in size to fit in a 2x3 grid. To comfortably fit 5 nippers in this size, the space available for the nippers is slightly smaller. I've also made the…
I struggled to find a Gridfinity holder for my nippers which didn't break. Most of them had very thin stands and walls and after breaking my second one, I made this.
A holder for 2x Nippers for the Skadis peg board system. No supports required Requires the Universal Hook by CSD_Salzburg: https://www.thingiverse.com/thing:2853257 Sculpt by @Mattburt77
The original is great and the creator was kind enough to include an F360 file. I adjusted the angle of the holders to 15 degrees for my own personal convenience. I also closed some of the holes on the bottom so it would print cleaner and…
This is IKEA Skadis wire snipper (side cutters) holder for Toptul 4.5" (DEBE204E). This item is inspired by IKEA SKADIS Collection by CSD Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA…
I decided to model and print replacement blades for my Ryobi 18v One+ Whipper Snipper (aka Line Trimmer). Even printing using PLA filament, I was pleasantly surprised at how well they worked. If you do decide to print some of these I…
A rack that fits a set of thin Knipex electronics pliers and 3 Knipex comfort grip small pliers. Prints without supports.
Skadis compatible remix of bulbasaur0's the nipper cutter holder. Needs supports but only on the rear side. Check the images for the best printing position and support locations.
Made for #8 counter sink screws
Recently, I needed to organize many nippers on my desk. However, conventional holder make the tips of the nipper face upwards, which I think is not safely. Therefore, I came up with the idea of designing a simple and beautiful nipper…
Another remix of the base units. Used the 1 peg one to make a nipper holder. Printed at 0.2 quality using support on build plate only. Giantarm silk copper PLA. Took about 17 mins. Kudos to ppeterka for the bases.
Here's my proxy model for the Frosthaven Lurker Mindsnipper monster! This guy needs a lot of support to print, but I tried to make it easier to work with than my original Lurker model by making the legs a lot thicker. That gives it both…
I ordered a set of ARC-PEGLAGO panels for my P1P so I needed a way to attach things to it. This is the second model I've created so that I can attach wire snippers to the printer. To attach the holder to the Skadis panel I used the…
This was one of my first models based on a ton of others. Nothing spe was a nice learning experience for me.
Pegboard holder for nippers using Sy's system.
I made this little 1x1 Gridfinity module to hold the scraper and snippers that come with most Ender 3s, in my case the Ender 3 V2 Neo, but I'm sure it would work with other Ender models. I used the dimensions from petkata's tool holder ,…
Quick remix to allow to mount SPN-120 Nippers to your HSW
top cover for a sthil fsa56 line trimmer needed a replacement after my original tabs broke up so i made this one has a flat top for ease of printing print .2 with supports for tabs
Mount your side cutters securely to any metal surface and have them ready when you need them.
These thread snippers doesn't have any safety on it and it is quite sharp. Made this sleeve case so the pointy tip are enclosed
I did not change the internal dimensions or overall dimensions of this model. I just added some grip sections; please follow Zkrapper's suggestions for printing. Enlarge by 103-105% if using a shrinky-type filament. Print Settings Printer…
removed the center rib, i found it much easier to insert/remove the nippers this way.
Remixed holder for nipper cutter. 1mm wider and 1mm longer. Bottom thicker.
Single-piece sheath for for 4.5" Gingher Knife Edge Thread Nippers. When these scissors are left loose in a bag they remain open and can get snagged on craft materials, or worse, your hand! After a few tragic mishaps (one of which…
A nipper holder for Ikea Skadis. It's inspired by Q1's design sizes, although it is done from scratch. The universal hook is required to use it. V2: white pictures. It has decreased size and time to print. It should be printed upside-down…
The original model only had slots / held 3 mini tools. I bought a bundle that came with 4 mini tools so I would like to add all 4 in the same spot. I also found that when I grabbed a nipper, I would squeeze the sides naturally but would…
Nipper/flush cutter holder for gridfinity. Not a great modeler so its separate parts. Print both and then glue the nipper mold into the box. Might be a little gap in the edges, but its functional. Should fit most smaller sized nipper…
This is the handle for SLICE: The World's First Nipper with Dual Replaceable Blades.
I made a remix of the Skadis Knipex Snipper for 2 to just hold 1 7803125 snipper.
Nipper Holder for 2 Godhand Nippers, side by side (such as the PN-120 and the SPN-120). The top of the holder has space for two 8x3mm magnets, to help ensure that the Nippers don't slide off. The bottom of the base also has a lip (not…
Remix of Some Guy 384763’s plier rack design Smaller gridfinity versions of the horizontal plier holder: Available in 1×4 (2 pliers) and 2×4 (4 pliers) formats. Slot width: 17.75 mm (1×4) and 18.375 mm (2×4) . Still fits into the shorter…
Knipex Super Knips holder for an Ikea Skadis pegboard. I remixed Aaron's holder by removing holes for the Skadis Universal Hook and adding the pegs directly. I also removed some inessential elements to slim it down and save filament. I…
The securing knob on my Ryobi Pro Cut II whipper snipper head literally wore out. This is the head type where short lengths of line are cut and pushed through the side of the head and are held by ratchet cam pawls. This knob works very…
HIGH TORQUE SERVO + BLADE CAN CUT YOUR FINGER OFF* DO NOT INSTALL BLADE WHEN TESTING POSITIONING* INSTALL BLADE DURING FINAL ASSEMBLY* I built this since I wanted to try building something using a servo controlled by arduino code. Also, I…
A custom insert for DSPIAE's nipper storage case to fit Tamiya's single bladed nippers. While this is modelled for the specific pair of Tamiya nippers I have, please check out the OnShape document for the measurements of the insert if you…
This is a Knipex snipper holder that fits US standard pegboards with 1-inch hole spacing. I remixed a model that is for Skadis boards. The upper peg needs supports. I didn't use supports anywhere else. You may also want a brim as the bed…
I left the name on it for anyone named Maddie. But I also included a blank model for anyone not named Maddie. Come on people just change your name, seems easier then modeling it in cad anyways lol UPDATE THE THICCINING: It was mentioned…
This custom Gridfinity-compatible tray is designed specifically to hold Xuron precision flush cutters / nippers securely in place. The form-fitted pocket keeps the tool from shifting while providing a clean, professional storage solution…
A holder for you nippers Prusament PETG 0.2 mm speed preset
This is my version of the Knipex Skadis holder. Did a few changes to it, so it can be printed in the standing Prints very easy…only the peg needs support, the rest can be printed without supports. Printed it in 0.2mm layer height.
Changed in Remix: Holds better Uses direct frame holder Fits the stock Anycubic Pliers Works fine for the Anycubic Mega Zero 2.0, and should work fine on other printer such as Ender 3. Printed laying on side, with supports, PLA, 0.2 layer…
I liked the design of the original, so I modified it to fit my specific use-case. Who knows, maybe it'll be useful to someone? There's extra space for a wire snipper, and a bottle of isopropyl alcohol. This is a bottle bought in Denmark,…
Remixed the original model so that I could mount it on a pegboard using rivets. Since there is only one hole and it's a tight fit, you do have to hold bottom of the holder when taking the cutters off. You can do this with the same hand…
Shortened version from Zacks nippet holder. Take 2 and ½ gridfinity rows instead of four and holds 4 pliers. Fusion 360 practice
Wire Cutter Wall Mount This wire cutter wall mount features a screw or nail hole and can easily be attached using double-sided tape. It is suitable for most wire cutters and provides a convenient solution for organizing tools. Screw hole…
Update Updated version with better visibility. Introduction Most 3d printers come with a snipper/flush cutter. 3D makers out there, like you, knows that using snipper/flush cutter is dangerous. Not only that but also to clean up the flung…
Fast and easy printed nippers with interchangeable 9 mm blades. It cuts through PETG, PTFE, nylon monofilament and similar materials with ease. BE VERY CAREFUL WITH BLADE INSTALLATION! Using pliers, carefully break off a piece of two…
Simple holder for MT106 Mr. Hobby Nippers, protects the blade tip. Print settings: no support, 10% infill, 0.2mm
A simple and practical wall-mounted holder for small snipper scissors used with 3D printers. Designed to be easily secured with a wood screw, this hook keeps your snippers accessible and organized. Perfect for keeping your workspace tidy…
Holder for Ender 3 standard spatula and nippers
********Designed for TPU or Flexible filament******** Replacement handles for my nippers. I printed in TPU, but I imagine it would work with PLA also. Also shown in the picture is my nipper holder . Scraper Holder also available.
The starter pull start pulley on my Ryobi Whipper snipper lost the teeth. Designed in Fusion 360, printed in PETG. Update the PETG sheared off the teeth pretty quickly. I printed it again in 90 hardness TPU and it seems to be better. I…
No more sharp points sticking up in the air and the nipper can be removed and returned to it's holder with one hand.
This model is a faithful recreation of the world-renowned HMV trademark in a simple plate format. Originally painted in 1898, the image of Nipper listening to a wind-up gramophone has become a timeless symbol of music history. The plate…
After many fruitless years, trying a plethora of handy hints to no avail, we have at last started enjoying success in ripening and consuming avocados from the two trees (of the Fuerte and Hass varieties respectively) which we had nurtured…
Made a simple wall mount to hang my Engineer Micro Nippers. It's mounted with 3m tape because of the uneven surface. Added a chamfer so it could be easily printed flat side down without supports.
Simple clip that attaches to the 40 mm front metal frame of the Ender 5 (or other printer with a 40 mm metal frame piece) and holds nipper cutters. I didn't plan for this, but you can see in the pictures that I also slid a pair of…
Made it flat to stick to a wall Print Settings Printer Brand: Creality Printer: Ender-3 S1 Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: XYZPrinting PLA Green Category: 3D Printer Accessories
I tried several different versions of this kind of thing but none of them worked with my snippers so I decided to make something that hopefully works for anyone. Very quick and simple print, no supports needed. The pictures are of the…
A holder to store ultra fine nippers in box on a Multiboard wall
A replacement for the spring on the nipper that comes with Creality 3d Printers
Quick remix to allow to mount SPN-120 Nippers to your HSW
Remix of Some Guy 384763’s plier rack design Smaller gridfinity versions of the horizontal plier holder: Available in 1×4 (2 pliers) and 2×4 (4 pliers) formats. Slot width: 17.75 mm (1×4) and 18.375 mm (2×4) . Still fits into the shorter…
Small 1x1x6 Gridfinity bin designed to hold the Ender 3/5 Flush Cutters/Snippers point down for safety. Uses about 24g of filament when printed at 10% infill. Fusion filed uploaded in case anyone needs to modify!
Original Model by user8595948019 https://www.crealitycloud.com/model-detail/k1-nipper-stopper?source=5 uploaded as its not available on Printables Material: Hyper PLA_1.75Parameter config: High Quality (Layer height: 0.1mm, Line width:…
With the new printer comes a new Nipper Cutter .The problem is it doesn't fit on the old holder because it's slightly larger. After many trials, this is the solution: a new holder that can accommodate both the old and new cutter. It can…
I started out designing for a frame mount just like how the spool holder is attached to the frame. This works, but must face rearward so that it does not obstruct the extruder. The second iteration involved removing one of the spool…
Check the size to make sure it fits your nippers. ===== If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: Doesn't Matter Supports: No…
I keep my pliers out for high access; I wanted a drawer insert for all the lower-access stuff that goes into that drawer
Designed by DarkySG , modelled by ayaanyani , commissioned by Sanglorian. Check out the Tuxemon project .
Needed a place to keep my nippers in easy reach. Simple design, allows you to keep your small needle nose pliers and nippers close at hand.
Just a quick thing that i needed to pack flush trim nippers - hope you find a need for it also
Inspired by 3D Endeavor's Honeycomb Wall plier holder , but modified to fit the tools I use all the time. Known Compatibility: Using my referral links helps keep me publishing free designs for everybody to enjoy, or feel free to leave me…
I wanted some simple scissors to cut my aquarium plants without using the regular household scissors. Better print with a larger brim and slowly. ❤ If you have questions or like this print, consider leaving a like, comment or a make.…
My second remix of a remix of a remix Ender 3 tool holder. Same motivation as the first one : add spots for more pliers/nippers. Only this time, it's compatible with the dual Z-axis upgrade. I also re-added the bottom for the USB adapter…
A remix of a remix of a remix for the millionth Ender 3 tool holder. I like the general design jeremymcclure had with a spot for the microSD adapter, putty knife, and pliers, but I also wanted to hold pairs of needle nose and tweezer nose…
printed in PETG, no supports on Creality K1
