Counting matching models…
Diebstahlschutz und Wandhalterung für das Nuki Keypad 2.0 Zusätzlich benötigt: 2x M5x16 2x Dübel und Senkkopfschrauben Anti-theft protection and wall mount for the Nuki Keypad 2.0 Additionally needed: 2x M5x16 2x dowels and countersunk…
This spare part is the yellow gear that attaches to the universal cylinder of the lock and serves as the transmission to the Nuki Ultra. Mine accidentally broke – likely because the gear has predefined weak points, probably designed to…
---2024/03/19--- Fox shaped head part added. This is model I made for a hands-on assembly for children. By attaching the head and tail, the tanuki is completed. If you lift it up and straighten its legs, you can make it stand up or sit…
[DE/AT] Grundsätzlich erfolgt die Befestigung am Türschloss durch das Ankleben mit einem 3M™ Klebeband. Da sich das Klebeband gelöst hast, habe ich diesen Adapter entworfen, der mithilfe einer Schraube direkt am Türschloss angeschraubt…
https://www.printables.com/de/model/407133-nuki-keypad-20
This base is made to be screwed to the door by two screws left and right of the key cylinder.
If you need to adjust this file, the values used in the original SCAD file to create this are: doorHeight = 6; nukiHeight = 9; nukiDiameter = 17; nukiBottomWidth = 1.5; doorPinDiameter = 8; splintDiameter = 3.2;
If you stick your Nuki Smart Lock on a protective rosette of your door lock, the connection of Nuki and the lock is very weak. When turning the key, too high forces act on the small adhesive surface and it will not hold in the long run. I…
The new NUKI Smart Look Pro Gen 5 cannot be mounted to a cylinder with a knob and since I don't want to replace the cylinder and go with the NUKI Smart Look Ultra , I designed a mounting plate and a replacement for the knob which fits in…
COMPACT AND ELEGANT ENCLOSURE FOR THE NUKI KEYPAD 2. Screws hidden on top + bottom for a cleaner look. Additional parts needed: Qty 2: M3x10 flat head screws (suggested with T10 torx drive) Qty 2: M3 Nyloc nuts. These nuts should be…
This is an adapter based on the official EVVA/CES Adapter (green (1) adapter). I've only kept the holes needed for our door to improve structural integrity. However, this can be easily custimized in the OpenScad Code ( splintDiameter ).…
As Nuki does not offer a BKS adapter in their store, made my own. Included 2 parts with key wings and without - the screw for the shaft may be hard to reach if the adapter plate is placed first. Printed in PLA, but should really use PETG…
To cover the gap between Nuki and lock I have create an adapter to cover it Um die Lücke zwischen Nuki und Schloß zu verdecken hab ich diesen Adapter gemacht PETG schien mir hier am geeignetsten
Der Spacer soll die Lücke zwischen Nuki und Türblatt schließen, mittels Klebeband wird es befestigt. The spacer is to close the gap between Nuki and the door leaf, a adhesive tape it is fixed.
As I only use the fingerprint sensor of my Nuki Keypad 2.0 and it is attached to my white frontdoor, I wanted it to have a less obvious appearence. So I designed a piece that covers the whole device except the fingerprint sensor and has…
This is a keyholder with integrated Nuki Fob. Warning: For this keyholder you have to disassemble a Nuki Fob - all warranty will be lost! I am not responsible for any damages! At the moment you will also loose the water protection - keep…
Bei meiner Variante wird die original Montageplatte weiter verwendet. Dadurch lässt sich das Nuki besser montieren und hält zuverlässig an der Tür. Free my models 487ab2ee
Nuki Keypad v2 only comes with a mounting plate with adhesive strips. But I would like to mount it on a wooden stand on which the paint is already peeling off. I think screwed is maybe better. For the print I chose PETG with 0.1mm layer…
Nachdem der Nuki Fob manchmal etwas schnell reagiert habe ich ein kleines Gehäuse erstellt, damit man nicht ausversehen auf den Knopf kommt. -------------------------------------------- Did a quick casing for nuki fob since the button is…
I recently purchased Nuki locks and ran into a problem. The cylinder on the lock has a protrusion that made it impossible for me to mount the mounting plate. I adapted the previous version of MAPERO from Cults and redesigned it for…
The stock Nuki Ultra plate doesn't mount flush with the door when installed on a eurolock. The plate is intended to replace the stock rosette of the lock. Notes : Printing this in plastic could potentially lead to weaker security, as this…
Da mir das Keypad ein wenig zu schnell von der mitgelieferten Halterung zu lösen war, habe ich eine eigene gezeichnet. Alle Knöpfe und der Fingerprint Scanner lassen sich weiterhin gut erreichen und bedienen. Lochdurchmesser für die…
Dva držáky zasunout do připravených otvorů v krabičce pro powerbanku
Cover for the Nuki Smart Door Lock 2.0 with Nuki Power Pack. Both USB-C-Ports are accessible.
Update: Added a 315 degree version (like a mirrored one) and a 4 screw version. Update2 (22.05.2024): I added a 135, 180, and 325 degree version by request. This is an angled baseplate for my Nuki Lock. It should work with Nuki 2.0 and…
All models don't require any supports. It's best to print the holder face down, as the STLs are already oriented that way. The Cover has two variants one with modelled threads and one with space for heat set inserts. The Holder has 3…
Remix of the original to fit a Nuki 3 Pro (to fit the short pin on the backside) for DIN EN1906 doors. Mounting directly to the door by 2 screws left and right of the key cylinder. Printed in PLA and ABS
## 🇬🇧 English Description # 🔐 Smart Lock Offset Adapter with 75% Gear Reduction (Tested with Nuki) ## ✨ Short Description Adapter for smart locks on outward-opening doors – with 75% gear reduction for increased torque. Tested with Nuki…
This is a cover for the Nuki automatic door lock, making it easier to turn. I always found the lock to be too slippery to turn and needed a rubber coating. I made this out of TPU with a texture on the outside. It works great.
Nuki Smart Lock Tragrahmen für die B-Platte Diesen Rahmenadapter habe ich für mein Nuki Smartlock angefertigt. Denn mein Türschlossrahmen war zu schmal für die B-Platte allein. Dadurch hat sich die Platte irgendwann vom Türschloss…
Modify the height in the slicer, or copy my model in onShape: Link
works with all door heights. You just need your diameter to be correct. 4 different splint diameters.
Printed in PLA or PETG.
Remixed Nuki spacer and added two holes for screws to be able to remove original rosette on the inside and to replace it
Wandhalterung und Rahmen für das Nuki Keypad V1. Es dient als Diebstahlschutz und zur Befestigungshilfe, wenn ein Kleben nicht möglich oder erwünscht ist. Es wurde bei mir mit 2 Edelstahlschrauben an die Wand geschraubt. Gedruckt mit PETG.
The thickness is 6.3mm. I also uploaded a step file that can be easily edited. Print Settings Printer: FlyingBear Tornado Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament: HATCHBOX PLA Category: Decor
We have one of these Nuki Smart Locks, and it works beautifully. The problem is that the Nuki isn't really designed for doors that have a decorative thingie around the keyhole. Because of the Nuki being quite bottom-heavy, it easily…
A Nuki Smart Lock adapter for a rectangular 4x10mm knob. It has a 2% tolerance, that worked nicely in my knob. Can be modified in OpenSCAD. I'd recommend printing it with 100% infill, as it's a small piece that will suffer a moderated…
Works great and tested with: 2 version. One with hole for screw with cone point and one without hole. Tested with PLA, CPEHG100, PETG If you print from PLA, I recommend version withoud hole. 0,15mm layer height 3 perimeters 100% infill
I had a gap of 5mm in my door. Use this plate to close the gap. Door is from manufacturer Groke (Germany).
I've requested an Abus adaptor to Nuki but my new cylinder doesn't have the shape of that adaptor but an 9.9mm cylinder instead so I had to create this adaptor for it.
This is an adapter I made to interface a Keso lock with a Nuki smart lock pro 4th gen. Suitable for Keso locks with a 7.1mm square extrusion. The fitting should be snug enough to avoid the need for a bolt to secure the adapter. The…
Addapter für KABA Schlösser mit Drehknauf Materiel: ASA Layerhöhe 0.2mm Infill: 100%
Adapter for rotary knob lock cylinder with a 12mm diameter for the Nuki smart-lock
My lock cylinder was not protruding and the glued version was not sticking. So I created this plate which I can screw to the metal together with the cover. The distance between the center of the cylinder and the screw is 51mm.
Adapters to use the Nuki Ultra Lock with common knob cylinders. You need to update the height of the base plate to match your cylinder. See Git Repository for more information: https://github.com/philipparndt/nuki-ultra-adapter I have the…
The Adapter Ring can be screwed into the Door. It allows to screw the Nuki mount onto the Adapter. It is quite thick, because my Key was too long and I did not want to cut it. One might be able to make it smaller. For the mount to the…
Adapter with which the Nuki Smartlock can be mounted on a Danalock locking cylinder. Printed with 100% infill.
As the white sensor is not fitting well my wooden door I created these covers for nuki door sensor. Now it is black and looks much nicer. although I need to buy brown filament to go even better. It fits good, but tight. It is quite thin…
Connect the two parts using the printed pin on the top part and snap it onto the base. Then place the candle holders. You can use a glue. Maximim diameter of LED candle is 30mm. (Do not use burnig candles) I'm looking fowarf for Your…
This is a remix of Wowe’s Nuki Keypad 2.0 Cover , modified to remove the button covers while retaining the rest of the design. I made this version because I still wanted to see the numbers on the buttons and be able to insert a pin…
If you have the Nuki cylinder lock and the Nuki door opener, the pin on the cylinder is too narrow and turns in the slot. The print was made with Sovol SV07 Plus and Amazon PLA. GCode file was created with the Cura derivative of Sovol…
Tlačítko ovladače dveří NUKI FOB není v prohlubni, má lehký chod a je riziko nechtěného stisku. S krytkou je tlačítko zanořené a není tolik náchylné na náhodnou aktivaci při nošení v kapse. Krytku lze nasadit i obráceně a tlačítko je pak…
Simple NUKI Adapter for CISA, ABUS, AXA, BRICARD, ISEO kind of door lock. Inner Radius 8mm Cut at 7mm External dimensions 15mm Depth 16mm/20mm Comment for original file for remixes!
A nice old looking style Hanukkiah for the Holydays. No need for support and easy print. 1 Model with text (for the miracles in Hebrew), the other one is plain. Good Holydays to all.
So last year I've bought the Nuki Smartlock Pro 3.0 It worked pretty well but lately started to skip steps when unlocking the door. I determined the issue to be the main gear (the one that also holds and turns the key), which over time…
Had the problem that the double-sided tape wouldn't stick. thats why I made this stabilizer. With new and bigger double-sided tape along with the stabilizer the Nuki wouldn't turn itself around. Original Thickness 7.6 mm so when you need…
Improved version of the nuki cog, less likely to snap. Following the Nuki recall for this issue. Printed using PLA with a 0.25mm Nozzle.
I live in Israel, and many people have had issues with the Nuki 3.0 smart locks after installing them on existing locks. This leaves a gap between the Nuki and the door. The cost of a simple metal rosette for the door in Israel, made…
Prepare the Key Adapter The key includes a cavity for an M3 threaded insert, allowing you to secure it with a set screw. Install Threaded Inserts into the Base The printed base has two holes designed for M4 threaded inserts. These provide…
I created this Red Cover mainly to overlay and filter the sharp white light coming from this smart lock when it performs an action like locking or unlocking. This may disrupts the circadian rhythm and melatonin production at night if your…
Base for Nuki 3 or 4 Pro.
Espaciador para cerradura Nuki 4, con resalte para pomo.
printed in PETG (not required) use: 4 screws of m5 and nuts onshape: https://cad.onshape.com/documents/5442eb843877b0e972606f13/w/3ad5bb959bb9e2532f018e74/e/0af4c64a48135b00ac0a3592?renderMode=0&uiState=65699be9b645062b129bc287
Remix von Wowes Button ( https://www.thingiverse.com/thing:6411125 ) Dieser Remix enthält eine Bohrung für den Schließen-Knopf sowie Knöpfe in 4 verschiedenen Durchmessern in jeweils zwei verschiedenen Stärken, diese können zB mit…
Nuki adapter for Mottura lock with knob.
Step Datei anbei um die Datei abzuändern.
What? Use this to adapt your Nuki Smart Lock 4.0 to an ISEO R6 knob cylinder. Press an M4 threaded insert in the hole. This may fit other Nuki smarlock models. This may fit other cylinder models, as Nuki sells the same adapter for…
Chanukiah is based on the structure of the Menorah in the Temple on the Arch of Triumph in Rome - חנוכיה מבוססת מנורה Print with supporters! I add adapters for candles :…
My Nuki Lock damaged my wall, so i made this bumper to protect the wall. This Bumper fits on the Ring of a Nuki Lock (I use a Nuki v2 Lock) and acts as a protector so that the lock doesn't damage the wall when the door is open. It fits…
Cover for the Nuki Smart Door Lock 2.0. The cover snaps in place (no need for double sided tape) and allows access to the battery compartment.
I removed the white cover of the lock to be able to mount the NUKI lock better. But then part of the silver door element would have peeked out over the lock. I wanted to cover that up and remove a plate where the NUKI mounting plate sits…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bYpHl8IhtT6 Category: 3D Printing
This custom-designed spacer plate replaces the standard cylinder cover and perfectly fills the gap behind the Nuki Smart Lock Pro (5th Gen) . It ensures a flush, clean installation and helps stabilize the smart lock on the door. Designed…
Halter und Gehäuse zum Nuki Keypad 2 Verhindert die Werkzeuglose Demontage des Keypad. Geeignet für Aussenmontage, wenn der Montageort vom Wetter geschützt ist. Es wird die Original Basisplatte verwendet um das Keypad auf den Halter zu…
Nuki lock cover against accidental rotation
Note/Update 2: I do not use this Nuki lock anymore and I don't recommend it. I replaced it with an Aqara U200 lock, which is better in every way. It supports Apple Home Keys, it's faster and stronger, and it has many more features and…
Mounting adapter for the Nuki Pro (5th Generation). See files for dimensions. If you find this useful, please leave a like! Ein Adapter um ein Nuki pro der 5Gen an einer Tür zu befestigen. Maße in den Dateien. Lasst gerne ein Like da!
The Nuki smart lock does not work on doors with a slam shut lock and where the key only rotates 90 degrees, as the smart lock needs more rotation to calibrate. I found a solution to this problem, so the Nuki Smart Lock now works perfectly…
My design takes into account the attachment with insert threads. I have adapted and extended the models.
My Nuki Doorlock tend to hit the wall, if the door is opened completely. To prevent the lock from scratches and the wall from hits, I designed this simple cap. It's designed not to influence the functionality like the light ring or…
Just a Remix to add a AirTag to the Keyholder. Replaced the square nuts with hex-nuts. Print without support. I used variable layer height. To avoid losing the airtag when the key falls to the floor, it is advisable to remove the screws…
In case your Nuki SmartLock (not the pro version!) is exposed to the elements, this enclosure keeps it dry. It is not IP-rated, so use at your own risk, but mine survived an exceptionally wet winter and spring here in the Netherlands, so…
Adapter for turning knob for attaching Nuki Smart Lock to CISA knob cylinder
Adapterstück + Blende. Hinweis zum Ausdruck: Mit 0,15mm Schichthöhe gedruckt. Und Anzahl Perimeter erhöhen bis alles gefüllt wird. Material: PC-CF oder PETG-CF empfehle ich. Im Slicer hohe auflösung bzw. nur geringe Längen- und…
The model was designed in conjunction my daughter, and from there the hands grew as a base for the Menorah. Chanukah is the holiday of unity of all the people of Israel and therefore the chosen base is the Star of David. In the upper…
I used Nuki's official logo from their press kit, turned it into an .svg file, flipped and cut it out. Looks a lot nicer on white walls. You can push the bridge's button with the letter U, there is no need to remove the cover. If you use…
Adapter that allows a Nuki Smart Lock to work with doors that have an interior twist knob instead of a key cylinder. Many doors only have a thumb turn on the inside, which normally prevents direct use with the Nuki mount. This adapter…
Nuki 3.0 (Pro) Battery holder for broken pin
A simple sleeve designed to hold the rechargeable battery in place for the Nuki Smart Lock 3.0. It replaces the broken latch that normally secures the battery. Recommended material: PETG Very tight fit – requires some effort to install…
Recommended Print Settings Material: ASA or PETG . Note: Avoid PLA, as it will warp or degrade when exposed to direct sunlight and outdoor temperatures. ASA is the gold standard for outdoor use due to its high UV resistance. Infill:…
Disclaimer: Fire is dangerous and burning plastic fumes can be toxic, design may be unsafe, do not leave unattended, do not use directly on table, candles not recommended, use at your own risk A pocket-sized chanukiah/menorah built for…
