Counting matching models…
V2 UPDATE: Ok, so i had a brainfart while "CADing" this and made it too tight for no reason at all. Now it should fit MUCH BETTER. The clip has identical dimensions to the original and the same function. The only thing that i could not…
Solid version uses a lot of filament - 78 gram at 40% infill. And a lot of time too! - 2 hr and 15 min at 200 mm/s. So i created a lightened version for those who want to save time and filament. Lighter version only uses 43g and takes 1…
2004 - 2012 Bentley Continental GT and GTC SunVisor Clip. Original centre piece and cover fit this model as shown in the photos. This was designed from scratch and not scanned. Printed on Ankermake M5c with 40% honeycomb infill to ensure…
Affiliate links for my favorite filaments to help support what I do are here: Linktree A simple mount that cleanly display's your Ace of Spades nerf gun on the wall in either vertical or horizontal orientation. It inserts into the chamber…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Why I designed my own retainer case: Most of the ones I…
FR : support de spray mural , en deux partie pour que les vises ne soient pas apparentes. EN : Wall-mounted spray holder, in two parts so that the screws are not visible.
To be mounted with two 3mm flat screws (6mm head)
Summary Here you will find a slim, elegant, and ergonomic stand / riser for your Apple Magic Keyboard & Trackpad. The slight elevation at the back ensures fatigue-free typing during use. Optimized for fast print, less material consumption…
NB : la description figure également en français sur l'Air du Bois Introduction I needed to mount two shelves in my bathroom after it was completely redone. The shelves are located between two walls and support little weight. However, I…
I originally designed this for a friend's wedding cake topper and printed in clear resin on a Form 2. Includes open and closed cockpit design - with or without stand.
Tomeks Hex Ukulele Hanger but with "invisible" mounting and a decorative pattern. Made with onshape
Modern Wall Hook with invisible mounting using a 3-4mm screw. Tested in PLA, PETG and Nylon. Three "top" variants are included: rounded, chamfered and sharp. Recommended settings: increase walls to 3-4, infill 35%+ Updated (2026/03/04):…
Impresora: Core One + Boquilla: 0,25 Altura de capa: 0,15 Relleno: Giroide 10% Paredes: 3 Material: ELEGOO Rapid PLA+
Modern wall hooks with invisible mounting using a 3-4mm screw. 3 differently sized fronts can be mounted to a single sized mount so you can easily switch and swap. Sizes Recommended settings: increase walls to 3-4, infill 35%+
🚀 WALL HOOK Invisible mounting. Modular design. Clean look. Tired of ugly wall hooks? This modular wall hook system hides the screw completely and lets you swap different front covers (sphere, hex, minimal) depending on your style. No…
Hey my 3D-Friends! I have designed a easy wall mount for these ASUS-Routers: ASUS RT-BE96U ASUS ROG RAPTURE GT-BE98 ASUS ROG RAPTURE GT-BE98 PRO ASUS ROG RAPTURE GT-BE25000 ASUS ROG RAPTURE GT-BE19000 ASUS ROG RAPTURE GT-BE19000AI Here…
I had the problem to easily close the inner slicing door after it is fully open. Thats why I designed a simple invisible handle to close the door. The handle is small enough to fit my fingers in between the handle and the cabinet. You can…
It is just a sunvisor clip for a pair (or two) of sunglasses. The thing about it is that it was designed to be printed in high warp materials, such as pure ABS/ASA/PA/PC, using a thermal expansion grid on the bottom for controlled…
I found existing models to be very bulky and not that elegant. I therefore created this wall mount for Lego Technic Cargo Plane 42025. The bracket is quick to print and does not use much material. When the plane is mounted, the wall mount…
I could not find any wall mount for the 9396 helicopter set. I therefore created this wall mount. The bracket is quick to print and does not use much material. When the helicopter is mounted, the wall mount nearly invisible. I used ABS…
[modified from the design by n9dmt ] this is a portable reel to hold a long wire and a balun/unlun transformer. basically an Antenna kit. here is a list of features and modifications i did: removed the screw feature that was hard to print…
These routing templates and clamp allow you to hide a MagSafe charger in a tabletop. Just use the templates to router the deep pocket for the charger and shallower areas for the clamp which is screwed in place. There are default templates…
Here I have three slightly different Cabinet Hanger inserts for you. New Hanger: GlueInPlace Instructions: First you need to drill a 20 mm wide and 9 mm deep hole to put them into. Then you push (or screw) in the Inserts. After that step…
Mopar #2789037 1967-79 Sunvisor end tip. Made as a quick temporary fix. Original designer: Chrysler Corporation, Detroit MI, USA. Available as aftermarket part. Support Your local retailer. Printed in TPE88. Fit is bit loose on sunvisor…
3 little keychains with style :) Tag chavant_fou_3d if you ever post your make on instagram :) 0.2mm nozzle is best but it was printed with 0.4mm nozzle. Please take care to enable "fill between gaps" on your slicer. You will have to…
This is a really simple print that uses some mid print M3 Nuts and two 10mm M3 bolts to firmly secure “The Milky Way” Lego set to the wall. Most of the weight is held by the main body of the print where it juts out, distributing the…
Note: This should only be printed in PETG or other high temperature material. PLA will melt in your car. I designed this as a complete replacement part after I was shorted one of these from the factory. This is by no means made to be…
This is a clone of the invisiLav , a holder / mount for the smartLav that goes under your shirt or collar. It hides the mic and reduces noise from clothing. Use a medical double sided tape to attach it to your chest or undershirt. Print…
A nearly invisible wall mount for the Home Assistant Green. Replace the screws with 25mm long M3 countersunk screws.
This model let your friends or colleagues assume, that you have a colt laying on your desk which is hidden by a piece of cotton. Could also be a decoration for the coming halloween. You could also call it fake-pistol, because there is…
Adapter for Insta360 ONE R and ONE RS cameras to always maintain the selfie stick in the camera's blinspot. Hole for ¼ inch threaded insert.
To avoid being dazzled by the sun reflection in between the 2 front visors or on the side completely. You can extend the panel to protect you against the sun. This should be printed in ASA for a better UV and thermal resistance. You can…
V2 UPDATE: Ok, so i had a brainfart while "CADing" this and made it too tight for no reason at all. Now it should fit MUCH BETTER. The clip has identical dimensions to the original and the same function. The only thing that i could not…
Update June 2025: 100 degrees Fahrenheit today, and the spring snap of the current version is no longer providing retention with the clip when printed in PETG. Update July 2025: ABS printed clip is holding up to 100 degree temp so far.…
Just a stand for my Scuf Envision Pro. I couldn't find any online. I made it so there is a gap to see if the LED's are still on and to not accidentally press the buttons when you put it down. I printed mine with a 0.6mm nozzle, on it's…
Print instructions 0,08mm layer heigh Printed in PLA or PETG, but any material should do Print front side down or back side like a foto No supports needed 15% infill 3 perimeters Additional hardware needed 2x 3,5x12 screws (or longer)
Invisible disability bow keychain and a badge for clothes and bags.
Are you a fan of Captain America and his iconic shield? Do you want to display your shield in a cool and secure way? Then you need the Captain America Shield Invisible Wall Mount , a 3D printable model that lets you hang your shield on…
Mount your records This is a pretty basic invisible vinyl record wall mount. Just insert one magnet in the print and the other one right above the print so that they are attracting each other. Then push the record and the magnet into each…
Das ist ein Remix für 4mm Acrylscheiben (Türen und seitlich) Rückseite eine 15mm HDF Platte Rücksprung hintere Befestigung ist 18 mm so das auch eine etwas dickere Platte nicht übersteht Alle Teile müssen auch gespiegelt gedruckt werden…
Es como una mini caja (ni 10 minutos de imprimirlo) en la que cuando desplazas la tapa para abrirlo ves el nombre. He dejado los archivos de fusión y las tarjetas en blanco para que lo hagáis vosotros mismos y algunos nombres que tenía ya…
I ended up with 2 Skadis panel slightly twisted, and after mounting them side by side on the wall, I was annoyed with the result, as you can see in the picture. This connector allows you to connect 2 Ikea Skadis side by side using the…
To install, simply screw the mount onto your wall, align the notch with the cutout at the back of the knob and push it onto the mount. Rotate about a quarter turn to the right and you're done! Recommended print settings Use a 'quality' or…
The best Xbox controller stand is minimal and nearly invisible — keeping the focus on your controller, not the stand (🇦🇷 Designed in Argentina by @impuestito_org ) – THIS IS THE ORIGINAL DESIGN ✅ Minimal design. No supports needed. Weighs…
Wall mount for the dell wd19s computer dock. I used the screws from broken chromebooks at my job and they worked perfectly I'm unsure of the thread pitch but they seem to be m2.5 x 7 mm Screws and its a fine pitch not coarse. It uses the…
Hey! I wanted a minimal and "invisible" stand to showcase my 8BitDo controller. So, I designed these little things. They're small but surprisingly stable. It fits into the screw holes on the bottom of the controller. Hope you enjoy it! Max
This model should be printed in its upright position to secure strength from the print direction. Fits the Lotus Elite (Type 75) and Eclats form the seventies.
Met deze afdruk kan je je boeken op een bijna onzichtbare plank stapelen. Je kan de onzichtbare boekensteun aan de muur vijzen en zo dan je boeken op stapelen. Het is de bedoeling dat je van het onderste boek de kaft onderaan de steun in…
Based on Fantastic 4 character fanart. Supports suggested. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
2-pieces with the seat as an option. Stands up with or without. Supports required! Marvel Rivals. Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This custom-designed hidden shelf is made specifically for the Ferrari SF-24 model by Burago (1:43 scale). It provides a sleek, invisible display solution by securely mounting to the wall with double-sided tape, eliminating the need for…
A version of the Xbox Controller Invisible Stand for the Joy-Con comfort grip.
Solid version uses a lot of filament - 78 gram at 40% infill. And a lot of time too! - 2 hr and 15 min at 200 mm/s. So i created a lightened version for those who want to save time and filament. Lighter version only uses 43g and takes 1…
Das Schlüsselbrett besteht aus zwei Elementen: Schlüsselbrett Der sichtbare Teil zum Aufhängen der Schlüssel. Benötigt eine Stützgeometrie an der Unterseite, die jedoch gut entfernt werden kann. Die Haken selbst können ohne Stützgeometrie…
This mount allows installation of an Envisalink EV4 board in Vista alarm control cabinets. 2.5 mm holes for mounting the Envisalink board have been placed to allow the Ethernet jack to face right or left. The board can also be attached to…
2004 - 2012 Bentley Continental GT and GTC SunVisor Clip. Original centre piece and cover fit this model as shown in the photos. This was designed from scratch and not scanned. Printed on Ankermake M5c with 40% honeycomb infill to ensure…
Print Orientation! Front of the hook on to the bed! Update: Please reprint the base with the V2 stl file. There was an issue with the tolerances. Thank you @ Wojciech Kawa for pointing this out :)
This is a lightweight sun visor for a Garmin RV760 GPS. Printed on a Mini with 0.20 PETG. Supports used in the corners to keep the outside transitions clean. It works best by using a few small pieces of double sided foam tape on the edges…
These are two separate “feet” to hold a set of headphones in a standing position. I made these because I needed an (as far as possible) “invisible” stand for product photos of a series of headphones. Since the feet are not connected to…
Invisible low profile wall mount to let directly attach the sound system.
Upgrade your ( Hornbach) Soluna 50mm wooden blinds with this simple and effective servo mount for automated tilt control. Unlike setups that require stepper motors and controllers , this design leverages a widely available mini hobby…
The Invisible Sun Black Cube by Monte Cook Games is an amazing product, but for such a voluminous thing it wastes a lot of space. This insert was designed in order to fit all components for the game, all sleeved cards including the…
Invisible Joker card from Balatro Background is only 1 layer thick, looks more transparent in person. Swap white for clear filament if you have. All credit to LocalThunk and Balatro for the design
Wall mount that handle with tape for your Philips Hue Bridge.
Happy 3D Printing! When I mounted my smartphone on the phone mount holder on my motorcycle last summer, it kept rebooting due to overheating from direct sunlight. To solve this issue, I made this sun visor to block the sun and protect the…
I bought the "high quality" ChaoticLab CNC Door Mounting Kit for Voron 2.4 for a lot of money, but it did not fit into the recommended standard original Misumi 2020 Profiles for Voron printers. The profile is 1mm deeper than what the…
I've been using AcuRite 06044M sensors with home assistant and wanted to wall mount them, but the options I could find seemed more complex than what I wanted. This model is small, prints quickly, and hides behind the sensor once installed…
Minimalist invisible xbox one controller stand to be used with gridfinity system utilizing a 4x1 size
A nice design Clothes hook, made so the screws are not visual when mounted.
A bracket that snaps to the car's back piece, making it completely invisible. Hang it using so,e 12mm double-sided adhesive or one to three screws or nails.
Simple Anti-Slip Foot for the Creality K1, K1C, and K1 Max Printer This practical and discreet anti-slip foot is specifically designed to keep your Creality K1, K1C, and K1 Max printer stable. Thanks to its smart yet simple design, the…
Motivation: Are you tired of lugging around that standard-issue retainer case the size of a small shipping container? Me too. Especially when you only need to hide one of those expensive plastic mouth-things. Trying to discreetly stash…
Magnetka v designu známé herní série The Last of Us . Vlastní výroby. Model s vloženým magnetem ("neviditelný magnet"). Vložení neodymového magnetu o průměru 1 cm a výšce cca 2 mm. (Při změně velikosti se změní i velikost magnetu.) Barva:…
This is a proof of concept for a minimally invasive (but rock-stable), modular/parametric system to attach stuff to wood boards. It's using two hidden dowel pins secured with 3mm SPAX wood screws. I'm planning to use this in my campervan,…
invisible ink pen and inkwell. just fill the inkwell with lemon juice and write You can find all my models here , thank you who will appreciate with a download or with a like
I want a “more stylish" model than the Original, so i made it wider with a slight curve on the both side. And to take more than a coat, I changed the angle to from 30° to 30° For printing settings, the same as the Original : - 4 Walls…
Description : This remix is a shorter version of the original modern hook, designed specifically to fit under tight spaces like closet shelves or cabinets. I love the original design, but wanted something that would fit in my hall closet…
This is a stand intended for coin photography. It is designed to be as “invisible” as possible; When taken from a front-on angle, it should be mostly hidden by the coin itself. I recommend printing it with the same color filament as the…
Plenty of invisible controller stands out there, but none for the Steam Controller (probably because nobody else has one), so I made one.
Affiliate links for my favorite filaments to help support what I do are here: Linktree A simple mount that cleanly display's your Ace of Spades nerf gun on the wall in either vertical or horizontal orientation. It inserts into the chamber…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********* Why I designed my own retainer case: Most of the ones I…
____________________THIS IS DIGITAL PRODUCT___________________ ______________________NON-REFUNDABLE_______________________ ___________________STL FILES FOR 3D PRINTING___________________ Files to print Invisible Woman Malice skin cosplay…
magnetic holder that utilises the empty spaces left and/or right the “seat belt reminder display”. It isn't necessary to modify any original parts as the magnet holder drops in with some additional force. The magnetholder can be mirrored…
A simple design to secure a Sonoff SNZB-02D Zigbee sensor to your Multiboard setup using a Flush snap. Use the magnetic support included with the sensor and attach it to the printed part with the provided double-sided tape. Ensure the…
Print Orientation! Front of the hook on to the bed! Tested in PLA CLUB: Early Access to Invisible Wall Hook Feedback and Suggestions
I had originally purchased a Danvise many years back and upgraded with the steel Saltwater Jaws offered by a 3rd party. It was nice, but pricy in comparison to the cost of the vise and added more metal to a nearly all composite vise. I…
100x160mm sign, advertising ACME Invisible Paint, as seen in cartoons. Mesh and Solid models provided. The solid version might be an easier print. Best with color switch above 1mm, as with included gcode for the mesh version. Also see the…
Simple invisible ball chain connector. Suited for balls around 3.4 mm and span of 4.2 mm. Print in ASA (UV resistant) or PC, ABS, PETG. Avoid PLA - might break.
100x160mm sign, advertising the ACME Invisibility Cloak, for which the phrase “As Seen on TV” is both applicable and oxymoronic at the same time. Mesh and Solid models provided. The solid version might be an easier print. Best with color…
This minimalist 'Invisible Cover' is a sleek, 3D-printed case designed for the Samsung Galaxy S24.
I got tired of buying the easy to loose stakes for my Gardena (Husqvarna) robot's fence wire, so I designed these. They print fast, I use 2 walls and 20% infill, .03 layer height. They dont need to look great, just need to be able to be…
First make gets a coffee!!! For your Invision MX450 Monitor Arm Raiser — aimed at users looking to improve monitor arm stability or height with a clean 3D printed part. 🖥 Invision MX450 Monitor Arm Raiser – Stability & Clearance Upgrade…
