Counting matching models…
I just installed the Nylock bed leveling mod on my MK3S and wanted to take the guesswork out of turning the bed screws in accordance with directions from the Prusa Leveling Guide in Octoprint. Each mark on the protractor is 5 degrees, and…
This tool is the same height as a standard Prusa MK3 and MK3S bed spacer. I got tired of dropping my spacers when doing the nylock mod so I created this simple tool to use. It is about 6mm in height and prints really easy. If you have no…
An aid in dialing in degree turns for the nyloc mod. The gcode file includes a colour change for the pips and numbers.
Note: If you have a MK4 with the new thermal expansion brackets under the heat bed, you don't need this. Otherwise, read on. This gauge uses the handle of the hex key as the pointer to a scale showing the elevation change of the heat bed…
Perfect for bed leveling nylon lock mod ~ 6mm MK3s+ bed spacer. Used for nylon nut tesion and set initial height to Prusa spacer's 6mm.
A simple protractor for nylock mod with 2mm allen wrench in solidarity with the needle.
Simple combi tool for quicker and easier application of the “Nylock Mod”. One end of the tool can be used as a wrench to turn the nylock nuts. The other end contains an 6mm socket where you can press in one original spacer of your heating…
I remixed Gauge for Prusa MK3 Nylock Bed Leveling Mod from Thingiverse to move the 0 to the middle so it's easier to calculate counter vs clockwise turns. Also added ¼ resolution dots along the edge but you must use a nozzle smaller than…
Bed level adjust knob for m4 nylock nut. Better than stock, especially for small beds (like Ender 2, Tronxy X1, etc), because it locks level in place. Original have simple threaded inserts that does not hold screw over time due to…
Issues levelling your Creality printer bed? Does it change over time? Did you get the yellow springs to fix it? Did it help, but not completely? This is for you. This is a replacement knob for the bed levelling knobs on Creality Ender 5…
Model includes test fit piece for M3 nut and 3x8 magnet, you don't have to print it . Print setting: 3 perimeters at least 15% infill I'd recommend "pull from behind" method for installing Nyloc Nuts. Magnet extraction hole is made for…
I was got tired of guessing in error a few times which cost me a bunch more time. Printed with a filament change at 1mm Reading degrees; 3 lines closest to hole are 45 deg sequencing 0, 45 & 90 8 Hollow lines are in 10 deg increments,…
Thumbwheel for M3 standard and nyloc nuts. Used for levelling the bed on a Prusa Mendel. Designed to be a tight fit around the nut so it doesn't fall off. Instructions There are 2 STL files, one is for standard nuts, and one is for nyloc…
After making my first remix I realized some people would want a knob of some sort so that this tensioner would be even easier to use. This should do the trick, there are three variants of the belt tensioner itself depending on what exact…
Allgemeines Größere und beschriftete Druckbett Justierschrauben mit integriertem Nylock Mod. Die Schrauben erleichtern das Leveln des Druckbetts, dank ihrer Beschriftung enorm. Zusätzlich benötigt Ihr eine M3 Nylock Mutter, welche während…
I liked this design and it adds a QOL life to an already robust and capable printer. However when testing the original design I found that the square nut wiggled too much for my liking and I worried that vibrations would cause the…
Drill through holes rather than modelled (to hopefully increase strength) Use m3 nylocs where possible - not heatsets Remove sensor mount
A simple resize of the hex cavity to snugly fit an M5 nyloc nut, for metric users.
Simple thumbscrew for M4 nyloc nut. Prints without supports.
Its hard enough working with all those small pieces trying to mount them, hopefully this will make it a little easier.
This is a remix of lionpants' original modmic mount, but adjusted for M3 10mm cap head screws Changes to Outer 4mm counterbore for M3 10mm cap head screw Changes to Inner 4mm captured nut (extended from 2.4mm) for M3 nylock nut as opposed…
Same mission as my AtlowTorque box holders. These sit perfectly in the void between the rail, battery box, and bang bumper to hold the nylock in place. STEP uploaded for ez mods. I HIGHLY recommend that you print hot and overextrude for…
m3 washer for prusa Nylock mode Please use Petg, ABS, ASA or other high tempeature materials video
Added some holes so the nylocks won't make contact with the tensioner containers. Please visit the original page for the pulley holders.
Modification of the fs-adjuster part to insert a M2 Nyloc Nut. It is recommended to use a 0.25 mm printing nozzle. Extra parts needed: - M2 Nyloc Nut.
Half the Weight, Half the Size – Bed Leveling Knob A compact, lightweight bed leveling knob designed for Ender 3–style printers. This version fits an M4 nylon lock nut (≈5mm thick) Simple, functional, and easy to print. Cheers!
I had trouble with the bed on my Anycubic Mega not staying level and having to constantly adjust it after every print. My theory is that the springs don't provide enough pressure to keep the adjustment nuts from backing off with all the…
I increased the size to match a more Creality size they also use an M4 nylock the nut is embedded with a pause at layer 30. This allows you to change both the color of the filament for the text to read better and it allows you to set the…
This is a glue down nut keeper for #10 nylock style nuts. The wings with holes help adhesion as the glue can ooze through the holes and in between the wings to secure the nut keeper. If an obstruction blocks one of the wings, it can be…
Rartrig V-Core 4 and 3 use an aluminium support bar for the x gantry. Changing the alu extrusion to a square tube made of titanium reduces the bimetallic bend. When installing the ti tube, something has to keep the nuts in place when…
Eva3 8mm stock probe mount has an internally installed Nyloc nut which can be difficult to install and arguably unnecessary This removes that in place of an external M3x5x4mm heatset with thread into plastic bore for holding. There is…
Got tired of also having to pull the rear bang bumper and using pliers to remove my foot hooks. These sit perfectly in the void between the rail, battery box, and bang bumper to hold the nylock in place. STEP uploaded for ez mods.
Little trays that your robotics students can use to sort their Nylock nuts that inevitably get confused in the hardware drawers. Just fill and shake back and forth and the ones that are too big will stay in the tray. Conversely, the ones…
Same mission as my AtlowTorque box holders. These sit perfectly in the void between the rail, battery box, and bang bumper to hold the nylock in place. STEP uploaded for ez mods. I HIGHLY recommend that you print hot and overextrude for…
A small, simple, zero-slop driver to help put a screw in an M3 nyloc nut. No added slop, so you'll want a well tuned printer for this. You'll want supports for the middle hole where the nyloc nut goes in. Update: added a bigger option as…
Just a quick remix without the engravement for the nyloc mod by Jakuza.
Modified version of https://www.printables.com/model/20656-nylock-mod-spacer-tool. Thanks for the model!
Thanks to Drakka01 for sharing the design. Added 0.2mm layer at 1.8mm height to allow printing without support. Must be printed at 0.2mm resolution. To complete the gauge, need to download “turn gauge arm.stl” from…
Added some more grip for the bit. Now the dial holds the bit more firmly. This only replaces "nylon_mod_point.stl". Use the existing "nylon_mod_base.stl". Print instructions Used 3 perimeters, which gives a more firm grip for the bit. It…
required 3x M4x40 mm screws and 4x M4 nuts and 2x M5x20mm screws and 2x M5 nuts. Printed from PETG. Dial indicator you can buy on Ali for less than 10 eur. Firstly it is needed to set X axis to horizontal position. It is done with top Z…
Gopro klite aerobar tt bars mount. Fits 22mm bars, uses m5 lock nuts and bolts.
Strong M12 M10 M10ForNylocNut M8 star knob with locked nut. Reinforced base. M10 cap is the same for M10 and M10ForNylocNut Strong enough in PLA.
