Counting matching models…
Many toothpick canopies for a 14mm camera are not suited to the up front bulk of the o4 (lite) camera so I designed this canopy to work with my o4 mount ( https://www.printables.com/model/1147195-dji-o4-lite-14mm-camera-mount ) providing…
Pico4用バッテリー取り付けアタッチメント（Anker Nano Power BankおよびPD Reduxに対応）。固定は両面テープです。Battery attachment for Pico4 (compatible with Anker Nano Power Bank and PD Redux). Fixing is with double-sided tape. https://www.ankerjapan.com/products/a1653…
ECO-WORTHY 12V 8Ah 96Wh LiFePO4 Battery with F2 terminals on 45mm center “SLA” form factor : 65.5mm(d) x 151mm(w) x 93mm(h) [ Need to scale for different batteries ; now includes: original ECO-WORTHY model with terminals set at 45mm…
Many toothpick canopies for a 14mm camera are not suited to the up front bulk of the o4 (lite) camera so I designed this canopy to work with my o4 mount ( https://www.printables.com/model/1147195-dji-o4-lite-14mm-camera-mount ) providing…
The Immortal T placement is not optimal if it's the only antenna you have on the quad, I use it because I use a diversity receiver with 2 antennas. This mount works well if you have U.FL to SMA adapters to attach your antennas for the air…
A simplified model, with the height of the main elements for a tight fit in the canopy
This file contains only the case portion of the model. The lid from the original model should still function. I'm not a wizard with Fusion360, so the magnet holes were also elongated by this change. To circumvent this problem, I added 6x…
Fixed thickness for optimal use in aos 3.5 v5. Maybe it will work with other v5 AOS frames, but I not tested this. This adapter has fixed camera angle on 45 degrees. Added Camera protection Added ND-filter retainer. Nd-filter not dropping…
GPS mount for the GEPRC M10 module, designed to fit the popular SpeedyBee Mario 5 frame. The mount retains compat With the release of the new DJI O4 Pro Unit, a new mount for two antennas has been developed. Each antenna is secured using…
Needed a wall mount for the carbon monoxide alarm that I picked up. I have made the model so that the hardware is optional. I recommend using 3 walls for this print.
Fichier expérimental pas encore testé Remix d'un fichier de "callmelue" j'attends la publication de son modèle pour le mettre en remix
Das GoFlyPro Frame wurde weiterentwickelt um die DJI O4 Pro und das Walksnail Moonlight Kit einzubauen. Es werden hier nur die benötigten Dateien für die GoFlyO4Pro Drohne hochgeladen. Es ist sozusagen einfach nur ein Upgrade und baut auf…
I made this bracket to keep my batteries in a line. It's not intended to be strong. there are stronger ones. The idea is to make them wobble less. The wall is supposed to be 1mm, but for some reason it is less than that. I could increase…
conception d une canopy pour le cadre fyrelens de flywoo ou meteor pro pour ceux qui veulent faire le lens mod du air unit O4 lite avec une lentille du O3 . percement de 3 trous pour la fication de celle-ci sur n importe cam plat pour O3…
Fits this housing: https://www.printables.com/model/1453676-dji-o4-o3-lens-mod-housing Still fits the O3 camera. Thanks to LorenzFPV for the alternate versions!
By default the Bee25 does not have a way to mount the o4 air unit which is why I made these case and camera adapter pieces for. The camera adapters utilize the default DJI provided camera cover + screws. Additionally the adapter provides…
DJI O4 light weight lens adapter kit. 1.6 grams. 30 Degrees.
Update 08.02.2026 noticed that you can't flip the video feed in the goggles anymore. So cam needs to be rotated 180 degrees and therefore the "backplate" needed changes 15, 25 and 35 degree mount for Kayoumini 2.5 and the Flywoo O4 Wide…
Kayoumini Canopy for O4 lite with Betafpv's C03 lens mod. Print in TPU
Soft TPU camera mount for DJI O4 Pro in the SpeedyBee Mario5 frame. Keeps the stock-style mounting, but adds clearance so the M2 camera screws don’t touch the aluminum side plates , reducing vibration transfer into the camera. Note: you…
Building the Joshua Bardwell QAV S2 3" and the DJI O4 Lite antenna is known to be too short. This mount makes it work
o4 pro housing to fit larger o3 lens mod from tokyodom's remix of krhoms gluing jig. this is designed and sized for the larger o3 lens housing, please see tokyodom's jig page for reference images.…
You can use the flywoo o3 lite nd filters with your o3 lens mod (dji o4 lite). For 12mm standoffs / 25 degrees of tilt
lens mod: https://youtu.be/rzRayF_7Avs?si=uzwZ8htJeb8kk96V I printed the canopy with 95a tpu (you can use pla supports if you have an ams or toolchanger) I just snipped off the sagging bridges after it was done. Its recommended to glue…
Reduced weight of @mosch_3121698 's design by +1 gram. Adapted to 15mm standoffs. 25 degrees only.
Single and double antenna mount for the HGLRC Rekon 5. Should/could fit other frames with 4mm standoffs that are 12mm apart (center to center). Made it to fit a single antenna (DJI O3) as well as the double antennas of the DJI O4. Printed…
I poorly modified a friend's mount made for another quad to fit my Seeker5. Not made to work with stock XT60 setup.
Hallo, ich habe dieses Modell designt. Das ist eine Kamerahalterung für die DJI O4 Air Unit Pro, speziell für den Frame HSKRC S5 V2 designt. Mir hat die Firma nämlich nur die Halterung für die O3 mitgeschickt, also habe ich die Halterung…
Ich habe diese Antennenhalterung designt. Das ist eine Speziell für die DJI O4 Air Unit Pro designte Antennenhalterung die die O4 Antennen vollständig schützt. Die Halterung geht auch für andere Frames ist aber für den HSKRC S5 V2 Frame…
Kayoumini 2.5 XT30, DJI O4 antenna and ELRS holder
Support for the DJI 04 Pro antennas on the GEPRC Smart35
The Cover for the GoPro HERO4 USB ports will easily get lost so this designed cover will fit perfectly and look very much like the original. Designed to be printed in TPU and pressed into the USD ports on the side of the camera. Perfect…
Busbar cover for cuprum busbars. Typically sold on nkon.nl, but can be found on Aliexpress and Temu also.
Overview This is a custom-designed mounting solution to fit the DJI O4 Air Unit Lite into the SpeedyBee Master 3X (or other frames designed for the original DJI O3 Air Unit). The O4 Lite has a different form factor and power requirements…
I've been looking for a transport case for my drone for a while, so I made this. The case is made so the drone sits with its 04 module inside the case, you can secure it with straps, but it should hold wihtout hem just fine.
I printed from petg, but it is better to print from smaller filaments (TPU, PC aero, or other aero materials) It doesn't break on impact Suitable for meteor 75 Feel free to leave your feedback!
Optimized fir Meteor75 Pro, 1.5g only. Printet with tpu95a. No supports needed. https://tressym.eu/parts/joker - original designers, check them out!
Original screws are too long. I used the 2x4 from this set from Amazon: https://a.co/d/0hV7whhL
A phone mount for running Octo4a on the Ender 5 Plus. Designed for a Samsung Galaxy Note 9 with case (11.5mm thick, 81mm tall in landscape). Clips onto the 2020 aluminium extrusion using my spring clip base . If your phone has different…
Universal mount for DJI O4 air unit with camera and antennas. It is designed for mount on stack 30,5 x 30,5 with M3 screws. Camera angle is 40-50°. Designed for five inch X frame with no props in view. Next version has bigger angle range…
Custom designed cover for the MKS SERVO42C NEMA17 closed loop controller. The original controller board has a 90° exit for the breakout board connector which sometimes leads to a collision with other parts. This cover fits the controller…
Mellow Micro4 DIN Rail Mount (LOW PROFILE!!) I needed a DIN rail mount for the Mellow Micro4 board, and wanted it as low profile as possible to safely mount a fan over the top. While there are a couple of models available online, they…
Mellow fly micro4 mount for 2020 and 3030 extrusions. Model and information from 3dmellow Micro4 | FLY Docs
Adapter for O4 lite Emax Babyhawk 2/ o3 lite 25°
Hi all! Here is my remix of another design posted here on Thingiverse. Made the mount compatible with the DJI O4 Pro, which bolts on the rear, and a 5V fan bolted on the front. The C20T gimbal sets as previously designed, with an airspeed…
TPU canopy designed for a 25.5 × 25.5 mm mounting pattern. Compatible with the O4 Lite camera modded with an O3 lens. The lens area have a light interference fit to help hold the camera in place. For additional security, I recommend…
support antennes O4 pro + GPS pour AOS 3.5 evo en TPU
🛠 Apex 5 HD TPU Parts Library A versatile collection of parts designed for the ImpulseRC Apex 5 Evo frame. Whether you are running a standard O3 build, a naked Flywoo O4 Lite, this pack has you covered. 📁 File List & Descriptions:…
Description I was looking for a holder/spacer for a Lifepo4 battery set based on EVE 40135 cells. So no models were found and I decided to build my own. The model consists of 2 parts: a holder with additional places for busbars or wires…
I love my LED setup and the AMS Riser V2 by maCyo42 but found that the LEDs I installed made seeing anything on the camera nearly impossible at times (even at 1% brightness). By adding this diffuser I now get ample light without blowing…
Do pobrania Projekt Osłon na terminale Busbary ogniw LFP 280Ah. Osłony zapobiegają przypadkowemu zwarciu, dodatkowo chronią terminale przed uszkodzeniem: Materiały ze składania magazynu na tej obudowie: - Jeżeli chciałbyś zapoznać się z…
An adaptor that i made to replace those absolute poo-tier 65mm threads on my gasmask with proper NATO40 threads. its glue-in because i have no idea what thread it is and i dont want to use it anyways. so just glue the thing in and be…
This small piece allows hardware mounting of your ESC switch at a convenient point in the back of the chassis, where you can turn the car on/off without taking the body off. It uses the stock motor wire clamp screw location and fits right…
This piece acts as a spacer to sit on top of a 2S LiPo battery to make it the same thickness as a 3S battery, such that you can use the same length straps with both battery sizes. The spacer has built-in ‘shoulders’ that are spaced apart…
set M3 inserts into the standoffs. designed for M5 t-slot nuts
This is a remix of the Pico 4 Controller stand with base https://www.thingiverse.com/thing:5844359
Kit to install a JK BMS RESS (JK-PB2A16S20P) into a server rack battery / lifepo4 case originally delivered with a Pace 200A BMS (other models like 150A might also be compatible). Print mounting point adapter with supports. I used organic…
This design of a M6 nut tries to follow the standards of ISO4032 and DIN934 as closely as possible. The thread is designed to fit to a M6 screw with exactly the same mechanical play as a metal M6 nut (when printed in PETG on a Prusa i3…
This hook is intended to be mounted on the vertical bar (below the steering bar). It is intended for my SoFlow SO4, but will fit every E-Scooter with 43mm vertical bar diameter. It features a hole that can be used to store your bike-lock…
This battery is pretty nice, screwed casement, bluetooth, new EVE 320WH cells (x4). Low and high temp protection works. Needed something for my DIY Starlink + 5G battery box thing. Feels insane to know I have 1,200Wh in this Apache 3800…
Für das 150 A Daly BMS habe ich eine Halterung gemacht. Ebenso für das Display. Und eine Abdeckung für die beiden Kontakte des BMS, da diese doch sehr exponiert sind. Für den Bluetooth Adapter habe ich eine kleine Halterung gemacht, damit…
Was looking for rugged protective covers for Microsoft Surface Go 2 , couldn't find anything for my purpose, so had to design my own. I designed it specifically to use it with my Surface Go 2 but figured out that it fits for following…
A stock Team Associated Pro4 SC10 does not have a good way to secure ‘shorty’ 2S LiPo batteries, which are popular for racing and come in much higher C ratings than the standard basher style batteries. So I designed these adapters to use…
Parts list for complete build out coming soon…
An adjustable side mount for the all phones to make great timelapses with Octolapse with Octo4A. Any kind of phone could be mounted with double sided tape. Requirements: 2 x M6 countersunk star bolt screw 2 x M6 nut Print Settings The…
Will work with Bambu and other large bed printers. Not compatible with Ender3 printers. This is a DIY battery enclosure kit, for the DIY battery building community. I had originally made a kit using 280ah-sized cell for my RV, it worked…
This is a battery terminal cover for CALB LiFePO4 CA180FI and similar battery cells. It's designed to fit the OEM CALB bus bars with the OEM bolts, washers, and locking rings, and includes a gap for a heat shrink ring terminal for your…
Simple standing holder for size 1x4 (no4) coffee filters. No supports required, print standing up. Mine is printed using PETG with 8% infill.
A stand for a phone running octo4a, personally I connected it to a wireless charging arm by Artos, but it should work for other phone arms. I printed it with a 70% infill in the bottom, to wheigh it down a bit, in PETG, with detect…
Pico4にAnker Nano Power Bank を搭載するアタッチメントです。両面テープでくっつけてます。仰向けになっても横向いてもバッテリーが衝突しないようにしてます。 An attachment to mount the Anker Nano Power Bank on the Pico4.Attached with double-sided tape.I make sure the battery doesn't collide when it's on…
Socket holder gridfinity bin for phillips head no1 to no4, 1/4" drive ratchet. The socket holder uses a gridfinity 1x2 bin. It's made for phillips screw drive no1, no2, no3 and no4. Print it with 10% gyroid infill, no support. You can…
Pico4用バッテリー取り付けアタッチメント（Anker Nano Power BankおよびPD Reduxに対応）。固定は両面テープです。Battery attachment for Pico4 (compatible with Anker Nano Power Bank and PD Redux). Fixing is with double-sided tape. https://www.ankerjapan.com/products/a1653…
ECO-WORTHY 12V 8Ah 96Wh LiFePO4 Battery with F2 terminals on 45mm center “SLA” form factor : 65.5mm(d) x 151mm(w) x 93mm(h) [ Need to scale for different batteries ; now includes: original ECO-WORTHY model with terminals set at 45mm…
This is an improved steering knuckle mount (part 18B) for the Tarmo4 RC car by KrisCubed. The original can be found on Thingiverse . Changes For me, the original design would always come apart quite quickly, with the screws rattling loose…
An OpenSCAD based model to use the Zero4U USB hub with the Pi Zero 2W stacked on top for use in a Voron 0.2. Two versions of the model are provided: One which uses a Voron DIN rail clip and M2.5 self tapping screws. A lower profile…
An OpenSCAD based model to allow the Raspberry Pi Zero with a Zero4U USB Hat to be mounted inside the electronics bay of the Voron Zero without modifying the rear panel. This version is only 31.6mm tall, including the DIN rail itself.…
Case for 4S EVE 15ah 33140 LiFePO4 battery The case provides space for a BMC and an active balancer (if desired) BMC and balancer are mounted on double-sided adhesive tape Screw holes are 3mm У корпусі передбачено місце під БМС і активний…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your O4 Pro/Lite camera with TPU in front of the lens for maximum protection but…
The Pavo Pico, Pavo20 and Femto from BetaFPV use the same VTX hole spacing so they are compatible. Not compatible with the Pavo20 Pro that is larger. The mount is around 2.8gr (depending on your print settings). The stock version (plastic…
Side Clamp camera mounting solution. Not super elegant but very solid! 25 degrees camera angle.
Fits on 20x20 and 25.5x25.5 M2 mounting patterns. Print in TPU with organic tree supports and 0.2mm layers. Inspired by my favorite O3 mount here https://www.thingiverse.com/thing:5840431/files
Print in TPU, organic tree supports. I weighed it at 1.7g. There's room to make it lighter for sure, but I also want it durable. Feel free to give me feedback!
snip a slit in the antenna ring to allow you to open it up to get the wire through. Use the mirror option to make the other side camera mount.
Support pour le module VTX du DJI O4 Pro L'accroche se fait sur les entretoises situées entre la stack et le VTX Il se présente en 2 parties : partie inférieure : casing pour le VTX, bien ventilé et molletonné. Bouton bind / USB C /…
This battery holder is designed to house a 10Ah lifepo4 battery for electronics projects. Mounting hardware is #6 machine screws or can be glued down. The corresponding file for the battery clip is included as well.
Updated version Designed for Nermak 10Ah battery but will likely work with other 10Ah batteries.
I made this adapter to fit my O4 Air Unit camera in the Betafpv Micro Canopy Lite (the Meteor series canopy). It fits with the tiny self tapping screws, but there isn't much room for changing the camera tilt. I then solved this issue by…
Backpack pour JeNo 5 version 3, avec antennes O3 ou O4 linéaires !!! Protection Top et Bottom plate. Ailerons pour aider les turttle et protéger les petites antennes linéaires !!!
This is the best way I could figure to mount a O4 Lite camera in a standard 14mm camera slot on existing frames. It won't work for all but should be a good stop gap until better is designed and new canopies are out. The weight with the…
