Counting matching models…
Size: 125mm x 90mm x 77mm WEAVED version: Filaments: PLA Vanila White (body), PLA Jet Black (eyes) and Filament PM PLA+ Pastel Bubblegum Pink (nose) CROCHET/KNITTED version: Filaments: Filament PM PLA+ Pastel Bubblegum Pink (body) and PLA…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
This model is ideologically based on the line Crochet tension ring Crochet Ring Crochet Ring (parameterized) New ideas have been incorporated into the model and the result feels significantly different. Printing recommendations:…
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
This ring is a full remake of the Crochet Ring originally uploaded by @Milan . After using the original for a short while, my wife asked for a few changes. Specifically, she requested (1) a taller guide rail at the base of the ring and…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Easy model. Print every size of hook from this set with different color of filament. This model is suited for print in place, no brim or supports. Print with PLA, smooth it with fine sandpaper. (Or you can print it with materials for…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for one variant
Easy model. Print every size of hook from this set with different color of filament. This model is suited for print in place, no brim or supports. Print with PLA, smooth it with fine sandpaper. (Or you can print it with materials for…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
🇬🇧 : Just a double hook for coats, bags, etc … Printed directly on the side No raft needed No support needed 30% infill recommended PLA possible (PETG recommended for duration) 🇫🇷 : Juste un crochet double pour manteaux, sacoches, etc ……
Print approx. €3.64–€4.44 excl. taxPreliminary estimate for one variant
In addition to this print, you'll need to eat a couple of boxes of Ferrero Roche. Print supports are required for the Tray! For the Pot Inserts, I printed mine in Spiral/Vase mode using a 0.4mm nozzle with the extrusion width set to 1.0mm…
Print approx. €1.04–€1.28 excl. taxPreliminary estimate for one variant
A modular 16x16 board that can maybe be used to play the out of print game ‘Ricochet Robots’ with robots and tokens. The walls can be plugged temporarily - attached an image with some board configuration. The diagonal wall for the…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
english On our Siemens egg boiler, which is over 20 years old, the egg support has practically disintegrated over time due to heat and lime exposure. I traced the part, which is no longer available as a spare part. In several development…
Print approx. €16.83–€20.58 excl. taxPreliminary estimate for one variant
36 holes, two or three colours
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
Friendly Articulated Easter Egg - Ferrero Rocher & Baci. Share a picture if you print one!
Print approx. €1.49–€1.82 excl. taxPreliminary estimate for PETGSource material: PET
Ce support de vide-poche est spécialement conçu pour s'adapter parfaitement à la Volkswagen Golf 8, au-dessus de la zone de recharge à induction. Il permet de ranger facilement vos petits objets du quotidien, tels que clés, porte-monnaie,…
Print approx. €4.70–€5.74 excl. taxPreliminary estimate for one variant
36 holes, two or three colours
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for one variant
dragon bottom - first color is light, second printed color is dark (black) and third is that one you just need to use because there is too little of it for any project but it is waste to throw it into trash bin - oval bottom is for same…
Print approx. €5.45–€6.66 excl. taxPreliminary estimate for one variant
Easy model. Print every size of hook from this set with different color of filament. This model is suited for print in place, no brim or supports. Print with PLA, smooth it with fine sandpaper. (Or you can print it with materials for…
Print approx. €4.41–€5.40 excl. taxPreliminary estimate for one variant
remplissage : 10 % support : oui
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
Here is a minimalist Pin Tray. It is an ultra simple object. And that's what I really appreciate with it. It prints easily with prusa. It's a practical object for everyday use. Print instructions I advise you to print with the default…
Print approx. €3.00–€3.66 excl. taxPreliminary estimate for one variant
Moche Nose Ornament 400 CE Moche Nose Ornaments: Symbols of Power, Divinity, and the Cosmos The ornate nose ornament depicted in the image is characteristic of the intricate metalwork of the Moche civilization, which flourished on the…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Friendly Four Leaf Clover - Ferrero Rocher & Baci sizes included. Share a picture if you print one!
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Crochets pour des rideaux de pergola Hooks for pergola curtains
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Pour accrocher un casque audio ou autre ustensile sur une planche de 19 mm d'épaisseur (¾"). C'est une épaisseur standard dans les bureaux et meubles préfabriqués. Un crochet de plus, mais celui-ci propose de fixer l'ustensile dans…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Broche nudo infinito Rombo
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for one variant
Broche nudo infinito Triangulo
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for one variant
Fini les clés et le telephone qui tombe dans les virages
Print approx. €1.96–€2.40 excl. taxPreliminary estimate for one variant
pumpkin bottom - first color is black, second printed color is orange and third is that one you just need to use because there is too little of it for any project but it is waste to throw it into trash bin - oval bottom is for same…
Print approx. €2.51–€3.06 excl. taxPreliminary estimate for one variant
Broche nudo infinito Estrella
Print approx. €1.48–€1.80 excl. taxPreliminary estimate for one variant
Présent en 2 parties. Il est recommandé d'ajouter la fonction de lissage (ironing) sur la dernière couche pour maximiser la qualité de l'impression. Peut-être fixé à l'aide de petits clous ou bien avec des petites boules de patafix. Have…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Coat rack with two hooks to be screwed into the wall. Porte manteau avec 2 crochets à accrocher sur un mur.
Print approx. €4.89–€5.98 excl. taxPreliminary estimate for one variant
Dieser Drehknauf ist passend für die ARENDO Eierkochermodelle. Es scheint ein Problem bei den original Knöpfen zu geben. Sie brechen nach einiger Zeit ab.
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
Ich habe eine Locher-Hilfe gebastelt, da die Locher bei uns in der Schule alle keinen Anschlag für DIN A4 mehr haben. Mit der Locher-Hilfe wird das Blatt sowohl am unteren Rand, als auch am Linken Rand gestützt, wodurch man mittels Stift…
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for one variant
Voici les liens de la cloche et du solenoide https://a.aliexpress.com/_EHzyeX5 https://a.aliexpress.com/_EGbmk8J
Print approx. €3.62–€4.43 excl. taxPreliminary estimate for one variant
Repuesto para una rueda de coche de juguete que no gira (va pegada).
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
This is a model to help you find your way between week A and week B. Il s'agit d'un model pour se repérer entre les semaine A et les semaine B. Dies ist ein Modell, das Ihnen dabei hilft, sich zwischen Woche A und Woche B zurechtzufinden.…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
I'm fairly new to crochet after decades of knitting, and while keeping up with the counting still gets to me, I love the sheer possibilities with the medium. The randomness of freeform crochet piqued my curiosity early on, but the thought…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
Uses an Ikea bell cloche (Morgontidig), to stack on a Drakfrukt or 4 ¾ Forenlig plant pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have…
Print approx. €4.76–€5.82 excl. taxPreliminary estimate for one variant
Uses an Ikea bell cloche (Morgontidig), to stack on a Gradvis plant pot. It's great for keeping the cats away when growing catnip indoors. Ikea made 2 cloche sizes, this print uses the larger of the two. Both sizes have been discontinued.…
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
Permet d'evacuer l'humidité présent dans la pochette contenant le filament (acheter des bille anti-humidité)
Print approx. €4.29–€5.24 excl. taxPreliminary estimate for PETGSource material: PET
crochet pour sèche serviette à barres horizontal. Employer du PETG ou autre matériaux qui résiste à un minimum de chaleur pour éviter une déformation quand le sèche serviette chauffe. 2 périmètres, 15% de remplissage.
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
The person I love has a crafty hobby: crocheting! So she told me about those crochet rings that help maintain the right amount of tension while preventing the yarn from causing to much friction on your finger. She found this ring by…
I designed a 3D-printed version of a spinning skein holder. The spindle is held captive by a small keyed shaft pressed into a 608 bearing. Print Settings: 0.4mm nozzle 0.2mm layer height Supports only on spindle and spindle peg 15-20%…
A simple but cute Christmas reindeer. Put a Ferrero Rocher into it and give it away as a cute present! Features Cute design Easy to print Two versions: Default and fuzzy skin Last minute gift Recommended print settings (or just use the…
After the success of the Ghost Booh for Halloween 2022 https://www.printables.com/fr/model/291519-ghost-booh You will love The Ghosts Booh crocheted for this Halloween 2023 ! This time 2 different versions : With or without a smile And of…
A simple but cute Easter bunny. Put a Ferrero Rocher into it and give it away as a cute present! Features Cute design design Easy to print Last minute gift Recommended print settings (or just use the provided print profiles) Layer Height:…
Dies ist das Komplettset, im Druckprofil findest du eine Variante mit schmalen und breiten Konturen. Such dir einfach aus, was die besser gefällt. Nicht vergessen: einzigartiges Design keine KI keine nachbearbeiteten Fotos, nur…
Youn can create patterns up to 190x190mm. The space between holes is 10mm each. Print the first two/three layers at 5/10ms .28mm layer height No Supports needed. For the Poles Print at least 4 of them. For improved pole design You can use…
Just a simple crochet hook, can increase size within slicer if needed, 20 minutes , less than a metre of filament. 0.2 res No adhesion No support. 20% or above infil.
A kit for crochet lovers where you can organize your crochet tools and also help you by spinning the yarn without falling on the floor or tangle. The magnet used was obtained from an old speaker with a neodymium magnet like this Date:…
I made some simple thin crochet basket bottoms in openSCAD. The wood ones are nice to look at, but if something gets spilled or you want to make a basket for the bathroom, it is nice to have something water resistent. Let me know if you…
Customized version of https://www.thingiverse.com/thing:53854 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=53854 Instructions Using the following options: diameter = 5.5 length = 145 throat_angle = 10…
Print in place, just a simple stitch marker. Designed by me but originally posted on my Makerworld page . Print in a rigid material and multiply for however many you need.
A crochet block designed for my girlfriend. Used to help shape the squares so that the end product looks better. I used ½" diameter wholes, and was told the dowel rods were too big, so I also created the poles with 3/8" diameter. Also…
simple needle for crocheting, slightly rectangular profile. flash drive for size reference on the second photo. available in small, medium and large.
A knitting bowl to prevent yarn balls from running away is a thoughtful gift for your grandmother. :) Simple to print, just need to add several supports (example at photo) P.S. Added an updated design with extra holes.
Crochet Block board with 4.10mm hole designed for 4mm wooden dowels
Testing of it in practice is still in progress Requested by a friend and working with her on preferences and design. Included multiple ring and hole sizes (ring size is just inner diameter in mm, because I got confused with all different…
Ficha creada con la siguiente configuración: Extrusor: 0.15mm Densidad: 20% Gasto: 2g-0.54m Tiempo: 12min
I made this needle really big(10 cm) so it's good for crocheted big toys. I use it a lot to sew parts of plush toys.
To help reduce the chances of yarn snagging on your hook, I recommend printing at the lowest layer height you can. Some sanding may be needed, but for me wasn't needed. Happy crocheting! Layer height 0.12 mm Infill 25% Wall shells 3 PLA…
🧶 Stitch Markers Description: Versatile stitch markers designed for knitting, crochet, sewing, and various crafts . Their smooth edges and rounded shape ensure that the stitches glide easily without snagging, unlike sharp metal safety…
This is a basic blocking tool for crocheting Granny Squares to keep them all the same size and with straight edges. I designed this tool in OpenSCAD so that anyone can download the program OpenSCAD and adjust the parameters in the file.…
Who doesnt love a cute DUCK in a Crochet Style ? If you have any issues with the File etc , do not heistate to message me here or on my Discord ! Files Included are : Body DONT KNOW HOW TO PAINT THE EYES ? I have a tutorial on my Discord…
Want to finish your crochet work? Print this needle and be done.
my wife was complaining about not having nice handles for her crochet hooks so i spent some time and made a nice whole set for her. best printed as is when loaded Will only work with TPU Update 1: had to make the 10mm hook handle a little…
Dieses kreativ gestaltete und artikulierte „Rochen“-Modell ist mit komplizierten Details versehen. Seine Flexibilität und macht ihn zu einem unglaublich realistischen Rochen. Viel Spaß beim Spielen mit diesem Rochen. Egal, ob Sie es…
A parametric crochet hook. Proportions copied from commercial stamped aluminium ones. It was a cool challenge to model in OpenSCAD, but the trial print in PET-G that is on the photo was not smooth enough to be comfortable to use. Perhaps…
This adorable Crochet Ghost will be loved by kids and adults. It looks awesome printed in a single color or it can be printed in colors too. You can get the factory files from Maker World. It has been designed with lots of details, but it…
This is the most common size crochet I use to teach people how to crochet. Size 5.5mm is equivalent to a US hook size I.
Printed with PLA, at 0.3mm, 15% infill. No support needed when printing top and bottom separately. I've glued the top and bottom parts.
Easy to print stitch marker How to print? 100% infill 0,2mm layer 60 markers print time is ~ 1,5h Enjoy and post realisation :>
Printing recommendations: Nothing special here but I recommend a concentric top and bottom fill pattern. Check the provided .3mf file. Parametrization I exported the basic size series as stl files. However, the strongest part of the…
Only needs support on the opening of the hole Use double-sided tape to hold it in place while using it
An updated version of my last knitting needle holder. I've adjusted the design so that it prints great without any supports. Make sure that the holes face down on the bed, for best results. I added a small angled pocket on one side to…
I made this little dekoration in form of bunny as a little Easter gift for my family. Perfekt as little present or as decoration Perfect size for Ferrero Rocher - but can fit other candy You can also find other shapes here:…
This hook was designed and refined via inputs from a lifelong crocheter. The tip of the crochet hook was elongated to enable the tool to easily pass through the yarn. The hook extends past the handle with a shallow angle to ensure a…
3mm and 5.5mm crochet hooks. These should be printed with 100% infill. Please tell me if you want any in a different size by commenting.
You are not allowed to take metal crochet hooks in the hand luggage of an airplane, but my wife likes to crochet during a long flight. Actually, a plastic crochet hook is also not allowed, but is allowed with a blind eye. Because a…
I wanted to try a marker that is easy to remove but will stay in place .
Français : J'ai créé cette totoche (jargon de scoutisme - corne de brume) pour permettre à chacun de faire la sienne soi-même, et pour avoir un style différent de la corne d'animal. Elle produit un son similaire aux modèles standards en…
In the year 2016 I created a "Vault Door Brooch" for SLS and or SLA/DLP 3D Printing that was requested by somebody. Quickly enough and still today people re-uploading the model or remixing without any permission and against the Creative…
Remix of Marcus_GT500 crochet markers. Print with no support. Added numbers to count knitting rows. Slightly larger overhang Rounded corners. Print different colors for 10-19, 20-29 etc Category: Other
22 cm Crochet blocking board in 4 parts to print on the Prusa Mini+ including stabilization holders. Also known as Granny Square blocking board . Because the Prusa mini has a print bed of 18 cm * 18 cm, I have a blocking board of 11 cm…
This frame is used to wet block 3.75 inch crochet granny squares. It could probably be resized. I printed with PLA, 0.2 layer height, and 15% infill.
A stylish Christmas ornament that hides a sweet surprise – such as the popular Ferrero Rocher. The model is available in two variants: with single or double ribbing. Both versions look elegant and practical – the ornament can be hung on…
Pillen für eine Woche. Wenn die Pillen für einen Tag entnommen sind, das Fach offen lassen. So wird die tägliche Einnahme angezeigt. 13.04.2024: stl-Datei Pillenbox “Abend” hinzugefügt. Bei dieser Datei habe ich die Höhe der…
Hello, heres a collection of crochet bases for you to print. I have created a few to start and can create more variants if there are some you would like. The file names have the sizes as the names. So 200x180-9 is a base that is 200m by…
A simple Crochet hook rack for a set of 17 hooks. Hook Size Hole size in the rack 8,0mm 7,0mm 6,0mm 5,5mm 5,0mm 4,5mm 4,0mm 12mm 3,5mm 3,0mm 2,5mm 2,0mm 10mm 1,75mm 1,5mm 1,25mm 1,0mm 0,75mm 0,5mm 8mm
[Français en-dessous] [EN] [Update 03.02.2024] I noticed some mistakes in the files I uploaded. I will print more of them, I corrected it for you and add a new one… "Classic" Hook: small place for hanging; 15mm “Large” Hook: bigger place…
Version 2 now avalible! Updated version has some improvements: the handle hook has been replaced to make it easier to remove the basket from the Thermomix the wall thickness was changed from 2mm to 1mm to improve cooking a larger hole in…
this is a ring that has a hook and a notch that allows you to grip your yarn better.
Anschlagschiene 1727 für Leitz Locher 5138. Getestet mit Locher 5138, sollte aber auch mit folgenden Lochern kompatibel sein: 5005, 5008, 5012, 5022, 5038, 5132. Update 20.11.2024: Ich habe das Modell überarbeitet und einige neue…
Use 7 pieces of filament about 6-8mm long to make location pins for gluing. Make sure the faces mate flush before gluing with CA. Sides need a bit of smoothing with sand wet sandpaper.
Meet Hedgehog's Cozy Autumn Haven , your charming companion for knitting and crochet! This adorable organizer holds your knitting needles and crochet hooks in its quills. It features a detachable yarn holder (spool) for smooth unwinding,…
Christmas Tree Ornaments holding Ferrero Rocher Chocolates. I printed at 20mm speed with standard settings and no supports. I printed them in white and painted them, due to a lack of suitable colours. They would look great if printed in…
This is a simple strainer for a ricecooker. I designed it, so you can wash the rice directly in the bowl and strain it perfectly, without having trouble of rice falling out, or not getting all the water out. My pot has a diameter of 14cm.…
A crank drive thread winder, for sewing, crochet, tricot etc. You may transfer thread from cones or hanks to balls. May be used with any kinds of threads, like sewing threads, tricot wool threads, strings etc. Printed with PLA, two layers…
Print with enough wall thickness so the hook end is solid. Orient the part so the main flat end is against the build plate. It should print fine without support using a 0.4mm nozzle and 0.15 layers. 1.2-1.6mm walls and 25% infill works…
Easter 2025 I have created Easter Bunny model with Ferrero Rocher chocolate to be used as a gift or Egg Hunt. Pretty easy print. After the print insert Ferrero Rocher.
ficha creada para los coches locos o coches de choque
Improved poles for Crochet Granny Block Better printability Tight fit
