P
PrintablesChris Schmuck
HOn30 shorty combine and coach
Sort like the Sierra RR cars, but even smaller! The 3D long couplers are for ultra sharp curves, you can use regular 1015 couplers if you like. Category: Hobby
- Downloads
- 304
- Likes
- 28
- Rating
- 0
Search results: on30
Counting matching models…
P
PrintablesRich Brungard
HOn30 Kato 11-109 Chassis cover
Cover snaps over a Kato N scale 11-109 tram chassis to allow for HOn30 or On18 critters to be built.
- Downloads
- 300
- Likes
- 18
- Rating
- 5
P
PrintablesChris Schmuck
HOn30 bridge
A HOn30 bridge based on the Buchanon bridge along the Waynesburg & Washington
- Downloads
- 279
- Likes
- 33
- Rating
- 0
P
PrintablesChris Schmuck
MDC 2-6-0 HOn30
MDC/Athearn 2-6-0 HOn30. I used Kato Bigboy tender trucks.
- Downloads
- 252
- Likes
- 23
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Forney KC #1
This is a HOn30 slightly shortened Kennebec Central Forney #1 made to fit a Toma Model Works Kiso loco chassis. The real locomotive was converted to burn coal with an extended smokebox. To print tip the body up at 23 degrees. After…
- Downloads
- 245
- Likes
- 23
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 18' boxcar.
This is a HOn30 18' boxcar that might or might not look like the Bachperson On30 model. I used Tichy grab irons, stirrups, and brake wheel. 1015 Microtrains couplers and Microtrains axle length (.540") 36" metal wheels form Eastern…
- Downloads
- 244
- Likes
- 24
- Rating
- 5
P
PrintablesChris Schmuck
Shorty HOn30 Climax for Kato 4 wheel chassis
This is a shorty Climax locomotive I made to fit on a Kato 4 wheel chassis. Category: Toys & Games
- Downloads
- 242
- Likes
- 27
- Rating
- 0
P
PrintablesChris Schmuck
Eureka Mill Ore Car HOn30
Eureka Mill Ore Car HOn30. 1015 couplers and MTL length axles. I used 36" N scale metal wheels from Eastern Seaboard Models. If you can support this model better, then please upload it.
- Downloads
- 239
- Likes
- 20
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Davenport
This is a HOn30 Davenport made to fit a Toma Model Works #6191 power chassis with 7mm wheels and 14mm wheelbase. If you're not up for the challenge of adding he crank rods you can use the "plan B" frame, it has journals like Davenport…
- Downloads
- 208
- Likes
- 20
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Casey Jones type rail bus
These are the parts I used to make my own freelanced railbus based on the Casey Jones of the Silverton & Northern. https://www.youtube.com/watch?v=1iZ76y9BxHk Category: Hobby
- Downloads
- 200
- Likes
- 17
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Locust Heights & Western Climax
The real locomotive was hand made and still runs. I used video stills to make the drawings. I used a Bachmann N scale 70 tonner with the circuit board removed. A 44 tonner would work as well. Category: Hobby
- Downloads
- 198
- Likes
- 19
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Cincinnati Locomotive
HOn30 version of a Cincinnati Locomotive built by the Cincinnati Car Corp. This 3d model was made from photos and not scale drawings. To me it is a little bit big for HO scale. You can resize.
- Downloads
- 198
- Likes
- 19
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Hoosac caboose
This is a HOn30 version of the 3' gauge Hoosac Tunnel and Wilmington railroad. I use Microtrains 1015 couplers and MDC N scale passenger trucks with 36" metal wheels. Category: Hobby
- Downloads
- 196
- Likes
- 18
- Rating
- 0
P
Printableswittmason
HOn30 wooden box girder bridge (long)
Wooden box girder bridge with “X” cross beams. Made to be printed in place and supported from underneath. For best results print in resin. The details are too fine for FDM.
- Downloads
- 196
- Likes
- 26
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Gilpin Ore Cars
HOn30 Gilpin ore cars, 2 flavors. The trucks have a flat side to the bolster, that goes towards the coupler. Couplers are MTL 1015. I use Eastern Seaboard Models 36" N scale metal wheels in the trucks, but any MTL length axle will work.
- Downloads
- 196
- Likes
- 15
- Rating
- 0
P
Printableswittmason
HOn30 wooden box girder bridge (short)
A shorter version of this wooden box girder bridge - based on this prototype Chris found .
- Downloads
- 189
- Likes
- 28
- Rating
- 5
P
PrintablesChris Schmuck
HOn30 Grove Farm 0-6-0T
HOn30 Grove Farm plantation 0-6-0T. I used an Aru Model ARU-A4010 chassis on mine. Category: Hobby
- Downloads
- 176
- Likes
- 16
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Brookville
This is a HOn30 5 ton BFA Brookville gas locomotive. It is designed to use a Toma Model Works power chassis #6151 with a 12mm wheelbase and 6mm wheels. This is the chassis used:…
- Downloads
- 173
- Likes
- 12
- Rating
- 5
P
PrintablesChris Schmuck
HOn30 logcar
HOn30 logcar. Uses 1015 couplers or print the one with dummy couplers. For trucks use the ones in my 18' Boxcar model. Wheels are Eastern Seaboard Models 36" metal wheels with .540" axles. But any Micro Trains length (.540") axles should…
- Downloads
- 170
- Likes
- 15
- Rating
- 5
P
PrintablesChris Schmuck
HOn30 Baldwin tender
HOn30 Baldwin tender. The floor is designed for Kato Caboose trucks. You can put their contact strips into these new trucks. Also made to fit a MDC/Athearn 2-6-0/2-8-0 motor in the tender or a coreless motor using the mount. Category: Hobby
- Downloads
- 169
- Likes
- 14
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Mattole Lumber Co. 0-4-2 Vulcan.
This is a HOn30 Mattole Lumber Co. Vulcan Iron Works 0-4-2. Made to fit a Aru Models 0-4-0 chassis with rear wheel added. Print body tipped up at 23 degrees and after printing remove rear tab. Category: Hobby
- Downloads
- 163
- Likes
- 17
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Ewa Plantation boxcar
HOn30 Ewa Plantation boxcar. Uses Micro Trains length axles. .015" wire for the truss rods. .0125" wire for the grab irons. Use either 1015 couplers or link-pin couplers. Category: Hobby
- Downloads
- 159
- Likes
- 18
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Climax
This is a HOn30 Climax I made using parts from a Life-Like SW600. Just offering it up in case any parts of it can be used. Category: Hobby
- Downloads
- 154
- Likes
- 13
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Eureka Nevada Motor car
This is a HOn30 motor car for the Eureka-Nevada Railway. It used a newer Kato 11-109 or 11-110 power chassis with the plastic shell stripped off. Updated with more detail. Category: Hobby
- Downloads
- 153
- Likes
- 21
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 waycar
Narrow a D&SP waycar for HOn30 and made a short version. I used .015" wire along the bottom of the frame. And I used Kato diesel wheels. Category: Hobby
- Downloads
- 152
- Likes
- 10
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 D&RGW flatcar
This is made to take 36" N scale wheels with .540" axles. (Microtrains length) I used HO scale 2x6's for the decking and Microtrains 1015 couplers. The first Rio Grande flat cars were 90 small 4-wheel cars with a capacity of 5 tons, built…
- Downloads
- 150
- Likes
- 16
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 J&S trucks
Jackson and Sharp type trucks for HOn30 passenger equipment. They use 36" Eastern Seaboard Models 9202 metal wheels for .540" MTL length axles. But any .540" wide wheel should work. Category: Hobby
- Downloads
- 149
- Likes
- 10
- Rating
- 0
P
PrintablesChris Schmuck
Kennebec Central coal cars HOn30
The Kennebec Central has 8 coal cars. 3 of them were made from flatcars. 5 of them were longer. These are old files. I use two 1/16" dia tungsten welding rods under the cars to keep them straight. Category: Hobby
- Downloads
- 146
- Likes
- 18
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Dolly Varden Hopper
HOn30 Dolly Varden Hopper. Plus bonus shorty.
- Downloads
- 145
- Likes
- 11
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Bellevue and Cascade Stockcar
This is a HOn30 Bellevue and Cascade stockcar. Frame uses Microtrains 1015 couplers. Trucks use any Microtrains axle length (.540") 36" wheels. Category: Hobby
- Downloads
- 144
- Likes
- 18
- Rating
- 0
P
Printableswittmason
HOn30 track tie strips for code 55 rail
Update: 12/22/25: I have updated the files to be easier to design in and with. The gauge is better on tight curves now as well. HOn30 tie strips with uniform ties and wood grain texture. To be used with code 55 rail. When laying the rail…
- Downloads
- 143
- Likes
- 8
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 rockcar
Quincy & Torch Lake early rockcar that was narrowed and shortened. I used the trucks from my boxcar here: https://www.thingiverse.com/thing:5131200 Couplers are Microtrains 1015. Category: Hobby
- Downloads
- 139
- Likes
- 14
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 locomotive cab
Just a HOn30 cab file I had laying around. For the kitbashers and scratchbuilders. Category: Hobby
- Downloads
- 139
- Likes
- 16
- Rating
- 0
P
PrintablesChris Schmuck
NEW lime rock dump car HOn30
NEW lime rock dump car in HOn30. I updated the journals and springs. Also added brake beams and more bolt detail. Included is a supported model. I used 1015 couplers and 36" N scale Eastern Seaboard Models metal wheels. But any…
- Downloads
- 132
- Likes
- 11
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 whistle and bell
The whistle is cored to put .010-.015" piano wire into it. Keeps it from breaking off. DON'T FORGET TO SUPPORT THE TINY PIN INSIDE THE BELL FRAME! Category: Hobby
- Downloads
- 126
- Likes
- 12
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Lime Rock Railroad tippers
These are tippers used by the Lime Rock Railroad made in HOn30. They use MicroTrains length axle wheels and a .020" piece of wire between the journals. Category: Hobby
- Downloads
- 123
- Likes
- 16
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Jackson and Sharp type trucks
HOn30 Jackson and Sharp type trucks. Use 36" .540" axle wheels. Category: Hobby
- Downloads
- 120
- Likes
- 11
- Rating
- 0
P
PrintablesChris Schmuck
Iron Mountain HOn30 ore car.
These cars were used on the Iron Mountain RR in Pardee MT. Modeled in HOn30. Any MicroTrains length (.540") axle wheels will work. 36" wheels in N scale are the correct size, but 33" will fit. Category: Toys & Games
- Downloads
- 120
- Likes
- 12
- Rating
- 5
P
PrintablesChris Schmuck
HOn30 railbus
Same railbus I have up on Shapeways. Will take either a Kato 4 wheel chassis or the Kato 8 wheel chassis. Category: Models
- Downloads
- 115
- Likes
- 9
- Rating
- 0
P
PrintablesChris Schmuck
Iron bridge HOn30
Just some bridge parts I had laying around. Category: Hobby
- Downloads
- 115
- Likes
- 11
- Rating
- 0
P
PrintablesChris Schmuck
EBT M3 railcar HOn30
Parts for an EBT M3 railcar. I used wheels from a Kato C12, but you could use Kato 11-607, 11-608, or 11-609 wheels. Category: Hobby
- Downloads
- 113
- Likes
- 17
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 shorty gondola
I use 1016 couplers and 2 1/16" tungsten welding rods glued to the underside. Category: Hobby
- Downloads
- 113
- Likes
- 6
- Rating
- 0
P
Printableswittmason
HOn30 Peco SL-400 Rough track ties
I disliked the tie spacing of the Peco Hon30 "rough" SL-400 track so I made some tie strips to use as a filler. When you decrease the tie spacing then you need to fill the gap with more ties. That's what this 3d file is for.
- Downloads
- 108
- Likes
- 12
- Rating
- 0
P
PrintablesChris Schmuck
Maine truck HOn30
HOn30 Maine truck. Uses .540" axle wheels. I use Eastern Seaboard Models 9209 N scale 36" metal wheels. Category: Hobby
- Downloads
- 106
- Likes
- 7
- Rating
- 0
P
PrintablesChris Schmuck
Maine Style HOn30 Trucks
These trucks use 36" Eastern Seaboard Models 9202 metal wheels for .540" MTL length axles. But any .540" wide wheel should work. This is an old file. Category: Hobby
- Downloads
- 106
- Likes
- 13
- Rating
- 0
P
PrintablesChris Schmuck
Brookville in On30
This is a HOn30 model that I scaled up to O scale Category: Toys & Games
- Downloads
- 103
- Likes
- 10
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 New Rockland Slate flatcar
New Rockland Slate in Canada had a small 30" gauge railroad. 0.540" wide axles and 1015 couplers. Couplers snap in.
- Downloads
- 99
- Likes
- 9
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Peco style track sections
Someone asked for me to upload these. I was able to use code 55 rail in them. Category: Hobby
- Downloads
- 96
- Likes
- 8
- Rating
- 5
P
PrintablesChris Schmuck
HOn30 Steam Dummy
HOn30 Steam Dummy *based* on Baldwin #12807 Std 5½&8x13 33” 0-4-0 Coke 7/1892 4 5/10-C North Chicago Street Ry #12 Motor Returned as “too small” ~ Resold Mohnsville & Adamstown #1 Print roof upside down and sand it smooth. "block" file…
- Downloads
- 96
- Likes
- 14
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 18' Reefer
To match my boxcar. Use trucks and underframe from the boxcar. Category: Hobby
- Downloads
- 95
- Likes
- 7
- Rating
- 0
P
PrintablesChris Schmuck
WandW pilot On30
This was a replacement pilot for the Bachmann On30 2-6-0 to represent the Waynesburg & Washington #4
- Downloads
- 91
- Likes
- 3
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 ore car with no couplers
HOn30 ore car with no couplers. Use Micro Trains 1015 couplers
- Downloads
- 90
- Likes
- 8
- Rating
- 0
P
PrintablesDrFixet
HOn30 Shorty Boxcab
Here is my version of the ALCO Boxcab designed for HOn30. This was designed loosely based on several prototype photos and uses a readily available chassis. This model was designed to be printed on an FDM printer with a standard 0.4 mm…
- Downloads
- 85
- Likes
- 14
- Rating
- 5
P
PrintablesDrFixet
HOn30 Freelance Class A Climax
Here is a simple (and hopefully somewhat beginner friendly) Hon30 Class A Vertical Boiler Climax. This was designed loosely based on several prototype photos with inspiration drawn from the NWSL and Mark Rollins kits that were offered a…
- Downloads
- 78
- Likes
- 19
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Mt. Sicker ore car
HOn30 Mt. Sicker ore car Category: Vehicles
- Downloads
- 76
- Likes
- 5
- Rating
- 0
P
Printableswittmason
On30 Flex Track - v1
Made for code 83 rail if you try code 70 let me know in the comments how it's working. This is using my RR tie textured models There are 2 sets of files here. 1 set is of the tie strips unsupported. The other is of the tie-strips…
- Downloads
- 75
- Likes
- 2
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 Climax pilots and brakes
These are for a Fyling Zoo HOn30 18 ton Climax. Category: Hobby
- Downloads
- 75
- Likes
- 6
- Rating
- 0
P
PrintablesDrFixet
HOn30 Freelanced Four-Wheeled Cars
Here are a few freelanced 4-wheeled cars to round out your rolling stock. These models utilize my wood side dump car chassis and were designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height. These…
- Downloads
- 66
- Likes
- 12
- Rating
- 0
P
PrintablesTechnicRCRacer
On30 Passenger Truck
I made this truck years ago to try out my new DLP resin printer. The side frames and brakes are installed on a central frame. This truck is designed to work with San Juan Car Company On30 metal wheelsets (SKU 5110) and the brakes are a…
- Downloads
- 65
- Likes
- 4
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 ore car single
Same as the other file, just as a single. Category: Hobby
- Downloads
- 64
- Likes
- 6
- Rating
- 0
P
PrintablesChris Schmuck
Kashima gas railcar HOn30
Designed to use a Tomytec TM TR02 chassis or something similar. Category: Hobby
- Downloads
- 63
- Likes
- 7
- Rating
- 0
P
PrintablesDrFixet
HOn30 Shorty Class B Climax
Here is another simple and beginner friendly HOn30 Freelance Climax, this time though it’s a Class B. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and uses the inexpensive and readily available…
- Downloads
- 62
- Likes
- 13
- Rating
- 0
P
PrintablesDrFixet
HOn30 H.K. Porter 0-4-0
Here is my take on the ubiquitous H.K. Porter 0-4-0. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and all parts are designed to be printed with no support. Also, this model is designed for use on…
- Downloads
- 62
- Likes
- 11
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 SRRL style railbus sideframes
HOn30 SRRL style railbus sideframes that fit a Bachmann 44 or 70 tonner truck. Category: Hobby
- Downloads
- 59
- Likes
- 2
- Rating
- 0
P
PrintablesChris Schmuck
Toma Model Works Porter brake shoes. HOn30
Just pop off the bottom plate and put this on. Category: Hobby
- Downloads
- 58
- Likes
- 8
- Rating
- 0
P
Printablesnsanti
ON30 Freight Truck / Bogie With Coupler Mount
The goal for this project was to create an ON30 truck, and make it as 3d printed as possible. The result I think is quite good. I printed everything in Petg. The couplers sit in the coupler pocket on the truck frame, then the coupler…
- Downloads
- 57
- Likes
- 5
- Rating
- 0
P
PrintablesChris Schmuck
Limerock car HOn30 single
Same as the other file, but only a single car. Category: Hobby
- Downloads
- 52
- Likes
- 6
- Rating
- 0
P
PrintablesDrFixet
HOn30 Wood Side Dump Car
Here is my take on the Wood Side Dump Car. This was designed loosely based on several prototype photos and a sales brochure. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height…
- Downloads
- 50
- Likes
- 11
- Rating
- 0
P
PrintablesDrFixet
HOn30 18' Skeleton Log Car
Here is a simple model of a narrow gauge skeleton log car. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and utilizes Micro Trains trucks, pins, and 1015 couplers. Tips for…
- Downloads
- 48
- Likes
- 10
- Rating
- 0
P
PrintablesDrFixet
HOn30 Passenger Cars
Here is my take on Overton style passenger cars. These models were designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and utilizes Micro Trains trucks, pins, and/or 1015 couplers. There are now…
- Downloads
- 47
- Likes
- 10
- Rating
- 0
P
Printableswittmason
HOn30 TTrak riser
Using N scale TTrak standards you can NOW make an Hon30 module with these 3d printed track connectors. They use Kato unijoiners and the Hon30 track tie strips (I've created available here ) and you supply the code 55 rail to have an Hon30…
- Downloads
- 45
- Likes
- 5
- Rating
- 0
P
PrintablesDrFixet
HOn30 Freelanced Davenport Diesel
Here is my version of the universal small narrow-gauge diesel often known as a “critter”. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and all parts are designed to be…
- Downloads
- 44
- Likes
- 9
- Rating
- 0
P
PrintablesDrFixet
HOn30 Baby Shay
Here is another HOn30 geared steam locomotive, this time though it’s a Shay! This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and uses the inexpensive and readily available Kato 11-105, 11-106, or…
- Downloads
- 43
- Likes
- 5
- Rating
- 0
P
PrintablesChris Schmuck
Kashima gas railcar HOn30
HOn30 railbus designed to use a Tomytec TM TR02 chassis or similar. Few different versions. Category: Hobby
- Downloads
- 42
- Likes
- 5
- Rating
- 0
P
PrintablesChiefbeefthief
On30 Display Shelves
12 & 6 inch shelves for displaying On30 model trains. Multiple shelves can be aligned to each other using ¼ X 2 inch dowels (stainless steel is reccomended). Can be attached to the wall with drywall screws or stacked on top of each other…
- Downloads
- 40
- Likes
- 7
- Rating
- 0
P
Printablesnsanti
Bachmann ON30 Drive Gear. 0-4-0 Side Rod Gas Mechanical Locomotive
Replacement Drive gears for Bachmann ON30 Side Rod Gas Mechanical 0-4-0 Locomotive. Printing: Printed Using 0.2MM nozzle for fine detail I printed these in PETG with 4 walls, 100% infill, and Arachne wall generator
- Downloads
- 39
- Likes
- 5
- Rating
- 0
P
Printableskaje
42 - Version30
The Answer. Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way. This one : 42 Rosetta Cube After the destruction of our civilization, this cube will help future generations by providing the Answer…
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
PrintablesDrFixet
HOn30 Gilpin Ore Car
To coincide with the release of my Baby Shay here is my take on the Gilpin Ore Cars. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and utilizes Micro Trains trucks, pins,…
- Downloads
- 28
- Likes
- 3
- Rating
- 0
P
PrintablesChris Schmuck
HOn30 hopper frame
Very old file. HOn30 hopper frames to narrow Tichy hoppers down to HOn30: https://photos.app.goo.gl/1hoMNR56THrudEvP6
- Downloads
- 26
- Likes
- 1
- Rating
- 0
P
PrintablesChiefbeefthief
HOn30 & OO9 Display Shelves
12 & 6 inch shelves for displaying HOn30 & OO9 model trains. Multiple shelves can be aligned to each other using 1/8 X 2 inch pins (stainless steel is recommended). Can be attached to the wall with drywall screws or stacked on top of each…
- Downloads
- 25
- Likes
- 5
- Rating
- 0
P
PrintablesDrFixet
HOn30 Electric Steeple Cab
Fresh off the Mad Doctor's operating table is my version of ubiquitous steeple Cab designed for HOn30. I've made steam and diesel engines, so why not an electric loco? This model was designed to be printed on an FDM printer with a…
- Downloads
- 25
- Likes
- 5
- Rating
- 0
P
PrintablesDrFixet
HOn30 AHM Minitrains Plymouth Frame Adapter
Here is an adapter to retrofit a Tomytec TM-TR02 chassis into a vintage Minitrains Plymouth. The vast majority of original Minitrains suffer from split gears. To fix this I decided to re-power mine with a more modern and easily sourced…
- Downloads
- 23
- Likes
- 5
- Rating
- 0
P
Printablesrolf_prusa_printer
Adapter EHEIM compact ON300 / GARDENA
Adapter für EHEIM compact ON 300 Aquarienpumpe Hiermit kann ein Ansaugschlauch mit 13mm Innendurchmesser (17mm Aussendurchmesser) an die Pumpe angeschlossen werden. Am anderen Ende des Schlauchs kann z.B. ein Filter aufgesteckt werden,…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesNathan Allen
On3 & On30 #6 Turnout Tie Cutting Jig
This is a way of cutting On3 and On30 switch ties to length for a #6 turnout quickly and for multiple turnouts. If you need a different number or gauge let me know and I can produce a jig for you. I used the Fast Tracks turnout…
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
Printables
HOn30 Shorty Class B Climax
Here is another simple and beginner friendly HOn30 Freelance Climax, this time though it’s a Class B. This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and uses the inexpensive and readily available…
P
Printables
HOn30 Baby Shay
Here is another HOn30 geared steam locomotive, this time though it’s a Shay! This model was designed to be printed on an FDM printer with a standard 0.4 mm nozzle and uses the inexpensive and readily available Kato 11-105, 11-106, or…
P
Printables
On3 & On30 #6 Turnout Tie Cutting Jig
This is a way of cutting On3 and On30 switch ties to length for a #6 turnout quickly and for multiple turnouts. If you need a different number or gauge let me know and I can produce a jig for you. I used the Fast Tracks turnout…
P
Printables
HOn30 Passenger Cars
Here is my take on Overton style passenger cars. These models were designed to be printed on an FDM printer with a standard 0.4 mm nozzle and 0.12 mm layer height and utilizes Micro Trains trucks, pins, and/or 1015 couplers. There are now…
P
Printables
HOn30 Gilpin Ore Cars
HOn30 Gilpin ore cars, 2 flavors. The trucks have a flat side to the bolster, that goes towards the coupler. Couplers are MTL 1015. I use Eastern Seaboard Models 36" N scale metal wheels in the trucks, but any MTL length axle will work.
P
PrintablesDJ_Foot
HO / On30 scale Single Track Wall or Supended Ceiling Model Train Deck System
Includes: track geometry guide with layout examples, and all single track STL printable models files required to make a suspended single track layout. Mix with the 2in/3in C-C double track deck system* in order to create passing sidings!…
- Likes
- 20
- Rating
- 0
P
PrintablesDJ_Foot
HO / On30 scale Double Track Wall or Supended Ceiling Model Train Deck System
Includes: track geometry guide with layout examples, and all double track STL printable models files required to make a suspended double track layout . Includes 2in and 3in track center to center (C-C) elements. Great mix with single…
- Likes
- 21
- Rating
- 0
P
Printables
On30 scale water tower
Mad to look like Disneyland new Orleans train station water tower. All pieces mad to print easy and glue together, with hot glue or rocket glue. Category: 3D Printing