128 models
Support my work by leaving a like and follow Get early access to more models on my Patreon Video : https://www.tiktok.com/@body_3d/video/7041923365627563269 Don't Forget to Follow me on Category: Toy & Game Accessories
Remix of original design https://www.thingiverse.com/thing:5165613 Includes: Repaired Original Damaged Mesh Better bed adhesion because of increased surface area on first layer Less parts (head horn combined with rest of model) Prusa mini…
Put some brim around the model because the tail can be peeled off.
A placeholder model of the RunCam Pheonix 2 fpv camera for quadcopters and multirotor cad assemblies.
Geometric Pheonix This model is a 3D-printable phoenix made of lines, which makes a great piece of decoration. H: 0.1" / 0.254" (in/cm) L: 9.9" / 25.146" (in/cm) W: 6.7" / 17.02" (in/cm) Credits : "Ethereum Classic Pheonix" logo
Incense for home A minimalist and practical design. Scalable model
#095 Onix – Low Poly Pokémon
Probably the best knobs for tektronix oscilloscopes. In this case, mine is the tds 210, but there are many compatible ones. There are already many models, but I didn't like any of them. They all had a big defect, they don't fit together.…
This is a small piece of a tale from a book called wings of fire
Inspired by the beautiful little Calidragon, I created this cute mini Pokemon which can be used to test your printer calibration. Test your supports, your new filament temperature, retraction and speed, and enjoy your little rock…
I worked on a grip type Walther GSP for my PP800. I recommend some sculpting application like SculptGL to modify the Standard grip and leave it in the shape of the user's hand. Best sence with 50 % Infill
Modified version of the Amiga 1200 display stand to support the Amiga 600, Amiga 500 and provide a higher support on the back of the Amiga and prevent it from getting stuck on the Amiga keyboard.
Feet and rubber pad inserts, universal across the Tektronix TDS500/600/700 oscilloscope family and possibly other Tek equipment from related lines. This is a near-identical copy of the original with a few changes to take FDM printing into…
This was a design for my brother. He goes wake surfing often and due to having a lot of people on the boat and new people learning, the fins get broken often. Being very expensive to replace we decided to try to make them. This is my go…
Printed in standard PLA with low layer height (0.8mm height took 1 hour) and 55% infill. Tight fit. Print two so they match!
This innovative 3D printable wall art serves as both a striking decorative piece and an effective acoustic diffuser, perfect for enhancing the acoustics of any room while adding a touch of modern artistry. The design features a…
A set of 3D models of knobs and buttons for the Tektronix TDS210 oscilloscope . Also may be suitable for other Tektronix oscilloscope models. The set includes: Tektronix knob mini – small knob; Tektronix knob – large knob; Tektronix…
super detailed pheonix dragon mix
This innovative 3D printable wall art serves as both a striking decorative piece and an effective acoustic diffuser, perfect for enhancing the acoustics of any room while adding a touch of modern artistry. The design features a…
The knobs broke on my old Tek oscope so I made a replacement. This model is as close as I could get to the original design in look and feel. I wanted to make sure it fits snuggly so it doesn't fall off in use but can still be removed.…
The uAvionix Sentry kit comes with a screw-down mount base attached to a RAM suction mount, which is quite bulky. It's possible to attach the screw-down mount base to other RAM mounting components (e.g. a ball) to make the mount even more…
One of our exciting releases of a headphone or headset stand featuring a favourite Pokemon of ours.. This headphone stand comes in 2 parts, the actual stand with the figure and then the headphones holder to slide onto it and can be glued…
Some parts for mounting 5mm Leds with the stock light buckets
This is a catch cup for the Kinu m47 Pheonix coffee grinder with slots for magnets to be glued in. I used 3mm x 3mm magnets which can be found on amazon. Print this with no supports and a layer height that gives you your desired surface…
I bought my Tektronix 50 MHz scope used a few years back. It came missing the control knob for trigger level. I would frequently swap the "holdoff" knob, located directly below it, until one day, one of the two prongs seating the knob…
Knob for older tektronix 7000 series and possibly other scopes. It requires the original metal insert. To apply the aluminium insert, remove the screw, heat the insert up with a soldering iron and push it inside like a standard heat…
Hello, this is a front cover designed for the Tektronix 465 but probably fits the 465B (but not the M) or other Tektronix scopes. It fits well and won't fall off because of the clips holding it in place. Print it with at least 2-3 walls…
This is a replica of Tektronix part number 214-1593-02 which is no longer available. This barrier key snaps onto the EDAC card edge connector that is used in TM500 series power supplies. It prevents incompatible plugins from being…
Mobile phone holder fit for the chevrolet onix
Atari 65XE Display Stand modified by Siliconix
If you like my design you can support me on BuyMeACoffee - https://www.buymeacoffee.com/kaushikbm -------- Tilt feet for Tektronix scope. Designed using FreeCAD. Print Settings Printer: FDM printer Rafts: Doesn't Matter Supports: Doesn't…
Tektronix 2230 oscilloscope front cover Snap on front cover for Tektronix 2230 oscilloscope. Printed in two halves plus clips and connector for glue. Based on an ebay listing for an authentic front cover, this should fit models: 2213,…
A simple adapter for a flush fit between Xiaomi HEPA Filters for Mi Air Purifiers and Arctics excellent BioniX P140 Fan
A simple and detailed model of a mythical phoenix. The bird is captured with its large, feathered wings fully spread. It features detailed plumage, a sharp beak, and strong talons. The creature rises from a beautifully sculpted base that…
It's a very simple but useful accessory. It fits well to my Tektronix 2213A oscilloscope, but I think it will also fit into other similar models.
Replacement plastic plate for the standard test fixture on a Tektronix 576 Curve Tracer. I believe it will fit the 577 as well. Does not include the provisions for the HV interlock (I don't have the plastic cover, like most people mine is…
Display Stand for Commodore C128
a lithopane I made of a pheonix
a modified version of the Atari 800XL Display Stand to support the Atari 2600 Junior.
This is a front protection cover for my Tektronix (Tek) 454 oscilloscope. It has hooks at the left and right side which clip on the side of the scope to secure the cover. I quickly threw this together and printed a few tests for fitting.…
A highly detailed collectible figurine featuring Jean Grey manifesting the awe-inspiring power of the Phoenix Force from Marvel's X-Men . This dynamic model captures the iconic mutant mid-flight, elegantly levitating as she rises from a…
This is the first file I have ever shared. Just replacement feet for a tektronix model 468 oscilloscope manufactured from 1980 to 1985. I increased layers and added fill to add strength. I hope someone finds this useful. Any tips from…
UPDATE 2017-07-04: New Model with improved strength. The kickstand that came with my Tektronix DMM914 Softcase broke, so I made a preplacement. It's been working perfectly for 5+ years. Model comes with support building as I had troubles…
The one from 2024 by Uski was too big for my 210, so this is a modified version. It took a few tries to get it right, and since the size of the printed power button hole can vary depending on your printer, I’ve included 4 versions with…
This model provides replacement front parts for TEKTRONIX 7000-Series Plug-In Extender tray (067-0589-00 Calibration Fixture). These plastic components are prone to breaking over time due to material aging, making these replacement parts…
bought an expensive ADS-B receiver, little did I know the design sucked on the ram mount attached to the case, being held by 4 tiny pieces of plastic which with the torque when connecting it to the mount broke within a week. Re-engineered…
Needs a 25mm M3 screw and nut. carfully pry the printed clamp appart to get over the saftey pressure release brass screw (you can also take it off it you want, but you have to tighten it proper when putting it back in place or your will…
Have you ever wanted to build a Recreator3D MK6 Fun Size with parts from an Ender-3 Pro but don't want to get a 12 volt power supply and heater cartridge? Have you had to settle for having an external PSU hanging out the back of your…
The end piece of the the flex shaft coupler for Tektronix oscilloscopes.
Small Onix Pokemon. About 1 Inch tall. Has a platform with supports you can take off later.
passend für: https://www.ikea.com/de/de/p/tradfri-kabelloser-dimmer-weiss-70408595/ Print Settings Printer: Ultimaker 2+ Rafts: Doesn't Matter Supports: Doesn't Matter Category: Household
This fits Chamonix 8"x8" lens board cameras and adapts them down to Sinar sized lens boards. You'll want to print one copy of sinar.stl and four copies of toggle.stl . You'll also need 8xM3x4x5mm heat set inserts. Install the eight…
Print Settings: Material: PLA Marble Layer Height: 0.12mm Infill: 15% Supports: Tree Supports (Organic) Creation Process: This model was created using a hybrid workflow combining AI generation and manual 3D sculpting: AI Generation: The…
Laser-cut insulator panel and 3d printed brackets for TM501 power supply based on the existing design by NFM.
Replacement knob for a broken tektronix P6021 current probe.
Replacement cup / mounting ring for the Offset Mult pot on Tektronix 576 curve tracers. flip it over and print with supports on build plate
Based on research by Noctua, having adequate spacing between a computers fan and the grill improves both airflow and acoustic performance significantly. Basically it eliminates the high pitch sound made by turbulence hitting the…
This is a personal design to attach a small power bank. The concept is to be able to have a battery attached to the Sentry without a long cable. The battery holder is for a PNY T2600 Li-ion battery You are more than welcome to text me for…
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
The feet modules of the Tektronix TDS3000-series tend to crack and break after decades of use. This can lead to the oscilloscope being unstable, or you may not being able to use the feet at all. This model is a foot module which replaces…
Hook to allow Tek P6131 & P6139A (not B) probe cables to be coiled out of the way when not in use & hung on probe body.
NOTE : V2 files have slightly larger holes at the top, matching more with an original part. These items often break when an unfortunate or tragic accident has been experienced by a 7000 series plugin module. I used this to replace one…
skinny holder for a tektronix plug (AM503 current amp is what I use it with, but any TM500 module ( http://www.barrytech.com/tektronix/tektm500/tektm500.html ) should work. I don't have the tektronix power supply where this TM500 plugs go…
Printronix T5308 - LED indicator cover
Printronix T5308 - stop on rolls of paper
About https://www.cambrionix.com/products/thundersync3-c10
Printronix T5308 - bottom stop on rolls of paper
The use of semi-rigid or heavy SMA cables with the Spectronix Eye-BERT 100G (100416A) can put excess strain on the SMA solder joints inside the Eye-BERT 100G. This simple cable guide clips to the sides of the Eye-BERT and helps prevent…
The Tektronix TM500 is a modular test equipment system offering a variety of plug-in modules that fit a dedicated series of mainframes with one to six module slots. This is a blank panel cover for one of its 6 open bays. The inset on the…
Tektronix O-Scope Alternate Sweep Circuit Board Clip #51 for the 2215A.
Printronix T5308 - print head holder
Printronix T5308 - stop on rolls of A4 paper
Adapter sleeve made to create a replacement ground lead for an Obsolete Tektronix P850 probe. Designed to fit the female socket connector end of a Tektronix part number 196-3113-02 which is being repurposed for the ground lead: cut the…
Have a Tektronix TAS 220? Have those long knobs for "Variable" and "Sweep Variable" broken for you, too? Good news: now you can just print a new one, and your semi-vintage oscilloscope can live on for a few more years! There are two knobs…
Replacement bottom feet for Tektronix 453/453A
A remix to fit Tektronix TPP0101 probes
This is a scale model of a real military armored vehicle—the Bionix Trailblazer—for display and diorama use. Ideal for collectors, wargamers, and hobbyists, it makes a striking display piece for shelf or tabletop scenes, and works well as…
If you've ever had your regulator/rectifier go on your motorbike you'll know the pain of jump starting your bike. Gammatronix (search ebay) do a light that lets you know the state of your charging system. Unfortunately my bike has nowhere…
Printronix T5308 - paper holder cover
This part replaces the failure-prone plug-in latch used in Tektronix 7000 Series modules, original part number 105-0075-00. The latch sits beneath the pull-release mechanism and is responsible for positively locking the plug-in into the…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 160x200mm in size You may print at higher layer heights below the Base Thickness of 0.32mm The Max allowed Thickness is 2.08mm and the Actual…
Print with supports. I printed in ABS/ASA because it will doubtless be getting left in my car in the summer, PETG is probably fine, PLA at your own risk...
A unique Ornamental Filigree Onix combining the iconic Rock-type Pokémon with an intricate openwork design. Onix’s long segmented body is transformed into an elegant ornamental sculpture with flowing filigree patterns, creating a striking…
I do like all the designs of StoniXX for the Vertex Delta K8800 This is not a real remix, but more of an add on... My mosfet heatsink was somewhat bigger, and couldn't fit it in the housing. So I made this, it's an extension of the…
Display Stand for Commodore MAX Machine VIC-10 Display Stand
After buying a used CT-1 probe without his case I propose an equivalent to protect the precious probe. All pieces are maintained with super-glue apply with a toothpick. Using SLA is a must otherwise the “Insert” part cannot be printed…
This is a battery door/compartment on Tektronix devices like the THM550, THM560, THM565 as well as MAC Tools ET-2020 (a.k.a. THM571) and even the Tempo TelScout TS90. These can be brittle and are often quite fouled by leaking batteries.…
The Umarex Iconix Is a great entry level PCP but its extremely loud, to fix this I have designed this slip on moderator. I designed this for the 22 caliber version but it will work on the 177 caliber version as well. I 3d printed mine out…
passend für: http://www.ikea.com/de/de/catalog/products/00347831/ Category: Other
This model is a replacement power button for Tektronix AFG3000 series function generators. The original button has some very thin plastic elements that can snap, resulting in the button dislocating from the power switch and rendering the…
Spare front panel knob for Tektronix 2225 oscilloscope. Used for trigger. Shoud be compatible with Holdoff, Intensity and with the different positioning knobs. It is a remix of…
Printronix T8000 series - stop on rolls of A4 paper
You need 2 M2 bolts (skirted to be flush) and 2 M2 metal threaded inserts (see the picture). I printed these models on their sides using a Core ONE. This helps the appearance of the slider top. Note that you will need to set the slider…
