Counting matching models…
Stable and waterproof OpenSCAD case V7.4 by pbtec See here a wonderful comment from a user: “This is INSANE! You sir deserve deserve the biggest applaud out there. This is a box to rule them all! … I have to admit I first didn't…
***NEW NOTE: Hey everyone, please stop reporting to me that someone is selling prints of this design. See the licensing at the bottom – commercial use is freely allowed. The original was by Happy Moon, who licensed it like that (and I do…
This small capsule can be used as an EDC accessory case, providing a convenient way to store and carry matches, pills, batteries, or other small items. Included in the design is a looped top, allowing you to conveniently attach to a…
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
This is a waterproof squeeze fan. It doesn't need screws, doesn't need support, can be assembled very easily, durable, very cool, and not noisy. You only need a hammer! +Jul 06,2021 The turbine have been updated to have more power. +Jul…
This is a rugged box with hinges and latches. It can be made waterproof by printing a seal in flexible filament, such as TPU, or by cutting a large 2mm thick o-ring to the appropriate length. (There is also a version without the seal…
This is my own design for a filament spool holder to be put on a roof or wall. UPDATE 07-26-2019: Added version 2, beefier build UPDATE 04-15-2021: Added version 3, more beefier build and extended the base to reach the mount screws more…
Subscribe Now! A great model by Milos. ( https://www.myminifactory.com/object/3d-print-batman-on-a-roof-45713 ) Time-lapse print video : https://youtu.be/uxLFw1A8tTA Remix to support free and printed. Tips: Try to lower along Z until all…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You will need six M3x30mm socket head fasteners for the main…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE 27th February 2022-…
New: The body kit is now compatible with all versions of the Prusa i3 from MK3 to MK4S! Let me introduce you to the Bulletproof Wide Body for the Prusa MK3 and MK4 series! A machine that runs and runs and runs gets a look that is equal to…
Please give a ❤ if you like it, it'll help others discover it! Thank you so much! Craft custom waterproof * junction boxes to your exact specifications with this versatile Fusion 360 parametric model . This new 3D model has the following…
I've created a new version of the 3D model with added features and enhanced security! Check it out! Craft custom waterproof * junction boxes to your exact specifications with this versatile Fusion 360 parametric model . Customize every…
This parametric box has been redesigned from the ground up to fix the long-standing issues users were having while taking into account a couple of personal goals for design considerations. Fully 3D-Printed, no hardware needed! Flush hinge…
The Vase was printed on a Geeetech A10M with the dual color extruder hence the color gradient. Here is an article if you want to learn more about waterproofing a print. After a bunch of trial and error the following settings worked for me…
Disney Characters Stencil: - Mickey Mouse - Minnie - Donald Duck - Daisy - Goofy - Pluto - Uncle Scrooge - Beagle Boy - Fethry Duck - Gladstone Gander Available in my Models Gallery. Stencils for drawing or painting famous characters from…
Needed a mount for my Starlink Mini that fits onto my roof rack T-track. Couldn't find anything that was slim and sturdy, so I remixed this case. I added overlapping sections with bolt holes for the sides (use M6 x 35mm bolts, nuts,…
Easy fishing form / mold for 16cm fish 6mm screw holes 8mm cutout for eyes Enjoy
A hoof created for a faun cosplay for Costumes by Wrii . Meant to be glued to a high-heel shoe sole with the heel cut off. I'd suggest printing in TPU for shock absorbtion and durability, but PLA with 5 perimeters and 0.8 nozzle worked too.
No matter what I tried, PrusaSlicer 2.4.2 insisted on unsupported bridges for the roof of the sharks mouth. I added a cylinder support enforcer to the unsupported section, and after printing, simply removed the supports.
This is a simple yet very useful planter pot saucer I designed for use with round planter pots. Initially designed to be less noticeable and prettier than the deep plastic saucers that I can find at the garden store. I have seen other pot…
did not find a high-quality keychain model and decided to create my own version
Simple Jug Can Pot Kännchen whatever to precisely I designed these to mix up some epoxy for my knives and pour that precisely into the handle molds. But it works super good with water too! I have 2 Designs: One with a handle to hold it…
If you have solar panels on a flat roof and the panels are less then 15 degrees mounted, some water will stay in the lower edge of the panel. After some time your panel become dirty in the lower part and it reduces photovoltaic panel…
If this proves popular, I will work on some other characters in the Kingdom Hearts franchise. So Please post your makes, hit like, and provide feedback on what you would like to see in the comments. This model was featured in an official…
This is rev2 of previously uploaded inline connector. It is smaller and consists of only 2 parts. In order to achieve IP68 rating you should use M20glands with sealing. Usually it comes with flat ring seal. Recommended resolution 0.2mm No…
So easy that you can do it with one hand! Heyy you, are you tired of missing the filament hole on your CORE one? Well.. i know that i am, so i made this quick to print attachment that you can print under 6 minutes at 100% Or if you're a…
I don't really like the glare from the backlight on the camera of my Q1 pro. Therefore, such a light-proof visor was made. It doesn't stick out much, it's hard to touch, it doesn't obscure the image much -it works.
Help me create more FREE models! If you enjoy my creations, consider becoming a supporter of my Printables club or you can buy some of my products . Your support helps me cover the costs of materials, energy, and time, allowing me to keep…
Multiconfiguration WAGO Junction Box V2 – Waterproof and pole mountable This is the next-generation version of the original Multiconfiguration WAGO Junction Box – now upgraded with robust new features to meet real-world demands. CHECK ALL…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE January 1st 2024- Added 2 styles of internal trays.…
If the weather is rainy or wet, your matches may become wet - and it isn't very pleasant when trying to light up wet matches - so I designed this waterproof matchbox case. As was said before - it's fully printable without any other…
A 3D printable replica of the famous oof stones meme
Largely inspired by Customizable Rugged Waterproof Box https://www.thingiverse.com/thing:3338826 I which to have a box that does not require any screw, and for the fun of design . This is to print in PETG or ABS with some high infill…
Waterproof ip67 ip65 Junction Electrical Panel Box by dury
The travel tube, fitted with a o-ring to keep keep the bad smells away from people and any water from entering the tube. Perfect for a hiking trip or going to the sea. O - ring dimensions: 18mm (inner diameter) 2mm height
A remix of Hexibase's subwoofer designed for clear side panels, so the cool waveguide is visible. It would also suit wooden sides. It's smaller than the Hexibase version, so it will print on a 19cm x 19cm print bed. I kept exactly the…
A remix of the other AirTag case, but with 4 screws and modified height. It was 3.5mm before and I changed it to 3.9mm. I printed mine with support under the screw holes at 0.2mm layer height
The helixer! Its a refillable personal air filter. You will need a bag of activated carbon from your favorite online retailer or an aquarium shop. Does not require supports while printing. To fill/Refill: Screw on the outlet screen and…
Working door knocker Print instructions Either print whole or split. I used tree supports on ABS with great success. Shout out to artist Kevin Kelley (Poog) who made it https://www.facebook.com/KevvyKupcake/
UPDATES 2022-12-02 Released DRIP_TIP_V2 ; it really makes it easier to push air through, IMO. Print with threads facing up. Removed historical files. No one should be using those anyways. 2022-01-20 Released EXT_CHAMBER RC2 2022-01-19…
---------- UPDATE AUGUST 2023 ---------- Added a printable O-Ring by @Das_Enzym_395842 Print it in a flexible filament like TPU. -------------------- Capsule for special cigarettes. Remix of "The Desperado | Waterproof Keyring Capsule"…
BOM PETG black filament for box FILAFLEX 60A for insulating gasket 8x screw M3 x 30mm Allen head
Filament: color fabb PETG/ASA Infil: >50% Support: yes Resolution: 0.2
easy printable mold for 9cm fishing lure 6mm screw holes Enjoy
These things are like $140 on FCP Euro now!!! If you've ever had to remove your sunroof motor cover, you've likely had clips flying all over the place. I tried to repair mine several times. It didn't work. This one fits a coupe. It's a…
A Pill Pill capsule, or pill shaped screwable container. To be completely waterproof, an O-ring must be added. Inner diameter should be Ø14-Ø18.5mm. Thickness 2-3.5mm. There is also a version for use without O-ring. The watertightness…
What is this? A rugged and waterproof 3D-printable keyring case for AirTags. Required Components 3x M3x6mm screws 3x M3 nuts 1x Rubber O-Ring (36mm outer diameter, 34 diameter inner diameter, 1mm thickness) Editable .f3d file has been…
Subwoofer or speaker protection for 8 inch driver. Measurements: Guard face: Outer diameter: 200 mm Inner diameter: 176 mm Height: 10 mm Legs: Outer diameter: 263.9 mm Inner diameter: 239.9 mm Height: 30 mm Total height (legs+face): 40 mm…
Sizes (Diameter x Height): 42 x 35 mm 42 x 50 mm 42 x 65 mm O-rings: Printed O-ring with FLEX O-ring 34 x 2 mm Printing Parameters: Resolution: 0.2 mm (O-ring 0.1 mm) Perimeters: 4 Infill: 15 % Supports: no Seam Position: rear Tips and…
The stick-on cabinet locks my in-laws got me started coming off after our 2nd little one, so I decided to see if I could design one to my liking. Designed to be easy to print and with a small flat bit on the end for alignment. I suggest…
Kindersicherung für Steckdosen. Die Sicherung sollte in alle EU Steckdosen passen
I've created this waterproof case for my sensor. It is o) easy to print (no support needed) o) easy to assemble - just 2 M2 Screws o) no specials needed - just a standard a rubber ring o) easy to mount (zip tie or double sided tape) The…
One word and one word only. BULLETPROOF! FEATURES Will 100% make your Dummy 13 seriously bulletproof. The armor has throat protection, deltoid (Shoulder/upper arm area) protection, side protection, lower back and side protection, abdomen…
Prefer configuration: Material: ABS, PETG Infill: 100% Supports are likely to be required
easy printable practical fishing lure mold / form for 5,5cm rubber fish
This is an update of my original EDC capsule, after ditching the “EDC” part for being too pretentious. On the original, the clip was too small, and the flap was too weak. Fixed and fixed. In this little capsule, you can carry pills, a…
Subwoofer port I designed for my cheap car subwoofer. Included is an .obj file so you can edit it to your own needs. Print Settings Printer Brand: Monoprice Printer: Select Mini Rafts: No Supports: Yes Resolution: 0.2625 Infill: 20%…
This rugged waterproof case is designed for the DJI Mini 3 and is also compatible with the DJI Mini 3 Pro. DJI Mini 4 Pro should also fit, but it hasn't been tested yet. Please let me know if you have posibility to test. The case is a bit…
It must be printed with ASA for proper UV and temperature resistance. Use supports on build plate only. At least 50% infill is required.
Simple bread proofing basket. Can't buy them anywhere because everyone is an artisan baker now, so I designed this. About the right size for 750g of dough. Designed in Onshape, model is here:…
Simple yet stylish Voronoi pattern anti echo soundproofing panels! 200x200, tileable, and come in two versions - with screw holes and without (for, you know, double sided tape) and being just around 150g per piece the double sided table…
Important note: Make sure that the top and bottom layer are set to 0. The trick is that the infill pattern is the grid which appears when no top and bottom layers are printed. I totally love the spillproof desiccant boxes for the AMS from…
I did not found a good morse code lookup table to be printed, so I made my own as a multi color print. Morse code is a method used in telecommunication to encode text characters as standardized sequences of two different signal durations,…
There are a bunch of texture rollers on Thingiverse, but i couldn't find a shingle one. So i made a simple shingle tile texture roller. This is HO Scale, but could be used for other scales too. I used it to roll air-dry clay for a…
Australian Outback Tested. (drove on gravel and dirt road for 2 month it didn't budge.) Starlink Mini Mount for Roof Bars Instruction: Print sideways - helps with strength. Check PDF for technical drawing before print! (Won't fit every…
Also included STL's in case others didn't want to deal with the .3mf file.
This remix allows for inset nuts so that no pliers are needed. A printable gasket is included if the case is not being used for a waterproof use case. If you are using the case for a waterproof application, you should definitely purchase…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker UPDATE December 31st 2023- Added an optional slightly…
Simple but effective smell proof container in 3 sizes, see cutaway image for how it works threads are designed to not need support so NO SUPPORT
The walls are 13mm and i made the volume at recommended for a vented enclosure excluded the speaker. It's built with tongue and groove for easy and strong assembly. Use low viscosity glue. The TCP115 is a very good woofer for the money. I…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Modular tray and dividers for the ever popular Water…
My knock-off version of the Traxxas X-maxx roof skid. Attaches just like the Traxxas part. Drill through the roof from underneath where there are skid attachment points in the body cage. Needed: (QTY) 4 each M3 x 20 button head machine…
Key Features: Field-Proof Design: Perfect for stationary use or transport, these robust boxes are engineered to withstand the rigors of both your workspace and the field. Stackable and Space-Saving: The innovative stackable approach…
These are 2 sizes for Faun hoofs I made for a cosplay party of friends of mine. They are modelled around the stiletto's they wore so you might need to adjust some things. When printing a set, just mirror 1 of the models to make a pair.…
This set includes a variety of corrugated metal roofing panels—the familiar wavy style commonly seen on barns, sheds, industrial buildings, and rural structures. Designed with scale modelers in mind, these panels are ideal for adding…
Introduction A few years ago @HexiBase_264072 built several versions of a 3D printed subwoofer using the Tang Band W3-1876S 3" driver. These designs take a very long time to print though, so I made a version of his design that is hollow…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The best quality is achieved if printed face down Print: 0.2mm Nozzle: 0.4mm Support: Not needed Brim: Not needed Infill: Not needed, but I'd suggest going with 100% to…
Childproof your home! Keep your family safe from sharp corners with these easy-to-install corner guards. Simply peel and stick to any exposed corner, and they'll provide a cushioned barrier that helps to protect little ones from…
Length : 188mm Width : 90mm Included is fusion360 file and STEP file, so you can edit it for your needs
Create long-lasting flames with this waterproof firestarter! Flames last 10+ minutes, even in the rain! No plastic is burned for this model - instead, the mold is used to create a waterproof wax and dryer-lint (or sawdust, paper, etc)…
I built the Mini Warehouse for use with the remote controlled Mini-Skidi RC model that I remixed here: https://www.printables.com/model/567657-the-mini-skidi-rubber-remix. It became a play environment for young drivers. The warehouse was…
I purchased a used roof rack, and 3 of the 4 necessary nut knobs were missing. I've simply used nuts, but there's a danger of scratching the car while working with a spanner! I designed replacements based on the remaining one, and printed…
We have needed some waterproof boxes to install some cables in it. as the shipping time was too long I've decided to print them with 3D printer. First 2 boxes were printed with PLA, should be waterproof. Another attempt will be made with…
Non Watertight version: https://www.printables.com/model/1022611-mini-pill-travel-case-container-for-backpack-or-ke
A magnetic fear tracker for Daggerheart in the style of birds perching on a rooftop. Prints with minimal supports, only the bird magnet holes require them. Ravens often represent tricksters in mythology, which makes them seem appropriate…
Designed this for Alpine R series 6.5" woofer and 3" midrange speakers. But, may work for other speakers with same bolt pattern. The pod retains the factory speaker angles relative to the door, but adjusts the depth to provide clearance…
Simple 4 Inch subwoofer using a Dayton Audio 4" long-excursion driver in a ported box. The box is braced and printed at 50% fill, although the brace is printed with 80% fill. I used cotton stuffing on the back and top wall near the…
Simple ashtray which is useful outdoors. If you planning to use it with your hot cigarettes, it will be good idea to cover the tray with something more strong against high tempertature. Like Alu Foil, for ex. Print Settings Printer Brand:…
As seen on YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
I took the model from RobRoy, a single fueltank/car box, and copy/past another one, glued them together in TinkerCad en made it fit my TRX4 Landrover Defender's roofrack. That's all I did. The model from RobRoy had a lid and holes to…
Non Watertight version: https://www.printables.com/model/1024677-mini-travel-case-backpack-key-hanger
This roof rack holder uses the t-nut slot in modern roof racks to attach to a cars roof rack. It will hold rods of any length and up to a 40mm handle. The rod can be held using bungee straps - ideal for beach fishing or short trips - and…
OK, I had to look up EDC – it stands for Every Day Carry. Things that are part of your personal daily kit. In this little capsule, you could carry pills, a band-aid, matches, emergency money, or a few precious sheets of toilet paper. It…
waterproof keychain container / Portable ashtray No need for supports (The lid should be turned to print without supports) The TPU rubber band can be replaced with an O ring of 20 * 2mm
Snap on roof rack for Traxxas TRX-4M Bronco.
Hi, Today I introduce you inline network waterproof connector which utilize standard keystone adapter. Items needed: 1x connector middle 2x connector cap 2xM20 gland 2x 1,5mm O-ring gasket (optional) 1x Keystone connector Assembly process…
