Search results: oos

Sort order

Counting matching models…

P
PrintablesPanda.FPV

Goose Knife

I adjusted the size of the knife a little so that it fits the goose better. printed with PLA 0.1 layer and some support I would be happy if you leave a feedback if you like the print :) and if you have special requests, suggestions for…

Downloads
697
Likes
136
Rating
5
P
Printablesbartosslajos

Simple goose cookie Cutter

Simple goose cookie Cutter. Use the "goose_cookie_Cutter_2" to cut and use the “goose_cookie_Cutter_stamp” to leave a mark on the cookie. Holmink.hu partner:

Downloads
636
Likes
58
Rating
5
P
PrintablesChris

Klammer für Moosstange / Clamp for moss pole

Ich habe eine kleine Klammer konstruiert, welche die Einzelabschnitte der Moosstange zusammenhält, damit diese sich nicht so einfach auseinander drehen. Es gibt sie in zwei Varianten. Eine sehr einfache (simple_clamp) und eine Zierklammer…

Downloads
219
Likes
22
Rating
5

Magic Trackpad Booster

I designed this booster for the Apple Magic Trackpad to make it level with my wrist rest and keyboard. Hopefully it can work for you as well. This design adds a 17mm boost to the height of the trackpad. Should you add feet to the bottom,…

Downloads
213
Likes
30
Rating
0
P
PrintablesGeoff.

Rooster - Coq French TECH 2013

PRUSA Prusament PLA Lipstick Red

Downloads
161
Likes
8
Rating
5
P
Printablesthebrew.shop

Rustic Rooster

This beauty is a bit tricky to print. I've included a prusa .3mf that should have slicer settings. The multi-color is done with filament changes. PETG and PLA both worked well, just ensure your bed is clean and sticky, and your stringing…

Downloads
133
Likes
39
Rating
0
P
PrintablesNina Máčová

Coaster: Rooster 4

Two coloured rooster coaster

Downloads
106
Likes
14
Rating
5
P
PrintablesGeoff.

Rooster - Coq French FAB 2017

PRUSA Prusament PLA Azure Blue

Downloads
104
Likes
8
Rating
0
P
PrintablesERiK004

Rooster decoration (Dekorace kohout)

Decorative rooster in a flower bed. I used a bamboo stick from Chinese food to stick. Dekorativní kohout do květníku. Pro zapíchnutí jsem použil bambusovou tyčku z čínského jídla.

Downloads
93
Likes
9
Rating
0
P
PrintablesStudio A26

Little Red Rooster Beads

A Bead of a little red rooster. Put two instances of this on your plate and make sure you mirror one of them to make two that either look at or away from each other. Printed in PLA in aproximately 20 mins, but should be printable in other…

Downloads
78
Likes
26
Rating
0
P

Theodore Roosevelt Bust and "Man in the Arena" Base

More photos to come once I have printed and assembled the model.

Downloads
75
Likes
5
Rating
5
P
Printablesakmiller01

Roost Cafe Coasters - Animal Crossing

A coaster set featuring Brewster's logo from Animal Crossing Roost Cafe. The embossed version is one file and straight forward to print. The multicolor version is designed to print with Z Hop enabled. If you want to slice your own…

Downloads
73
Likes
40
Rating
0
P
PrintablesEric

Ukraine Rooster Soda/Beer Can Handle

Just insert the “Courage and Freedom” holding part in to the rooster base, it's a snap fit. The soda/beer can should be put in from top, remove from bottom. STOP INVASION! Here is the story of this pottery rooster:…

Downloads
67
Likes
15
Rating
0
P
PrintablesMattsonn

Doosan/Daewoo Forklift key #212

An Ignition key for some Doosan or Daewoo forklifts, Original key was marked with “212”, I modeled an existing key so I don't have any info on compatibility other than It worked in the Doosan machine I tried it in. Printing solid in PETG…

Downloads
64
Likes
5
Rating
0
P
PrintablesNina Máčová

Rooster 8 (two colours / four colours)

Wall art / coaster / fan: Rooster (two colours / four colours) You may find model of fan handle here: Fan Handle od autora Eva Máčová | Stáhněte si zdarma STL model | Printables.com Important: This fan is 2 mm thick, so you need handle…

Downloads
46
Likes
14
Rating
0
P
PrintablesLemoulin

Rooster Sliding Puzzle 4x4

Rooster Sliding Puzzle. Don’t forget to leave a like!

Downloads
41
Likes
15
Rating
5
P
PrintablesHaggiwatt

Hahn / Rooster

modell Hahn , skalierbar model Rooster , scalable

Downloads
37
Likes
1
Rating
0
P
Printables321POP

The Man In The Arena - Theodore Roosevelt quote

The Man In the Arena is a popular motivational quote that is particularly apposite for our current era, with no shortage of Critics for the Doers of deeds. However it is actually a short excerpt from a very long speech by 26th U.S.…

Downloads
36
Likes
7
Rating
0
P
PrintablesGeoff.

Support for Roosters - Coqs French FAB & French TECH

Support for Roosters French FAB 2017 & French TECH 2013

Downloads
27
Likes
6
Rating
0
P
PrintablesLEBOWSKI

Foosballtabel Score tracker

My friend has an old Foosballtable that broke at the score tracker. So I made him new ones. I printed it in PLA.

Downloads
25
Likes
3
Rating
0
P
PrintablesMZ4250

Goose Hydra

This model has been submitted to the Prusa Printers tabletop games contest! Just to show it fits the Criteria its: Printability : Been printed in FDM and resin. Here is a gallery of my patrons who have printed it in both materials:…

Downloads
10,916
Likes
1,986
Rating
4.93
P
PrintablesHexxWizard

Desk Goose

Meet the Desk Goose! 🪿 A simple, cute, and minimalist goose designed to bring a little personality to your desk, shelf, workspace, or anywhere that could use a new feathered friend. The model features a clean, smooth design with a white…

Downloads
6,190
Likes
1,134
Rating
4.95
P
Printables3DPmom

Rocket with Boosters (2 Sizes)

These are fun rockets with boosters that extend on take-off. I designed two sizes and each contain two parts: the main rocket body and the ‘boosters’. I've included the following STL models: Large Rocket (complete) Large Rocket (body…

Downloads
6,126
Likes
1,358
Rating
4.99
P

Boost your multicolor prints! Central filament sensor mount with filament clips for single / double spool configuration for Elegoo Neptune 3 / 4 Pro Plus Max

Update 16.03.2024: A new version (V3) is now available and got slightly changes to fit better into the extrusion. Feedback very much appreciated! Update 02/2024: V2 is now available. This version contains filament clips on both sides! See…

Downloads
5,027
Likes
719
Rating
4.77
P
Printablesd0mse

Moos Stab | Moss Pole - self watering

Verleihen Sie Ihrem Indoor-Garten mit dem Moosstab-Set eine elegante und präzise Lösung zur Verbesserung des Wachstums und der Präsentation von Kletterpflanzen. Das umfassende Set enthält einen sorgfältig gestalteten Moosstab – Dieses…

Downloads
4,419
Likes
388
Rating
5
P
PrintablesBilliam

Horrible goose glasses holder

Inspired by a great game about a bad goose Remixed from: Goose by Maggiman2001 Print instructions Both the neck and beak require supports. I printed both flat side down. I used Inland PLA+ white, Paramount Matte Black and McLarren Orange…

Downloads
3,769
Likes
820
Rating
4.78
P
PrintablesCats

Goose from Untitled Goose Game

This print was for a friend. It is from Thingiverse and is glued up from 6 bodys with each color being an own body. Therefore it can be printed on a singel extrusion machine.

Downloads
3,249
Likes
647
Rating
4.87

Flashforge Adventurer 5M (AD5M) Nozzles Box and Accessories Box - two styles to choose from, including sets that attach to back of printer v1.2

VIDEOS These two short videos explain everything: NEW New as of January 28, 2026 — The following additions and improvements were made: Now the boxes can be mounted on the sides of the printer. Click here: New as of January 27, 2026 — The…

Downloads
3,120
Likes
387
Rating
4.95
P
PrintablesPopandsicle

LoZ: BotW Master Sword Alternative Pieces with Looser Fits

ATTENTION! THESE PIECES ARE ONLY TO BE USED BY THOSE EXPERIENCING DIFFICULTIES FITTING CERTAIN PIECES TOGETHER FROM MY ORIGINAL MASTER SWORD DESIGN! Hopefully not many of you will need these pieces, but more than a few people who have…

Downloads
2,968
Likes
790
Rating
4.93
P
PrintablesMartin

Booster Pack for the Space Shuttle Endeavour

This is a booster pack for the Space Shuttle Edeavour . It consists of the Orange external tank and two Solid Rocket Boosters. The pack is attached to the Orbiter using the holes for a stand. In the suffix of the files, there are color…

Downloads
2,903
Likes
1,195
Rating
5
P
PrintablesTantalus

Pokemon Booster Pack Dispenser Unit

A Custom-Designed Dispenser to fit Pokémon Booster Packs up to x43 packs for the single dispenser & x86 for the double dispenser lid is optional depending on your needs. The Dispenser prevents damage to booter packs, warping & UV…

Downloads
2,885
Likes
287
Rating
5

Drag Chain for CNC, two-piece, snap-open, 64mm radius, choose from two sizes: A=20x40mm, B=dual tracks, 20x26mm each (v1.14)

UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…

Downloads
2,871
Likes
338
Rating
4.91
P
PrintablesOtty_Skipper

Cute minimalist Christmas Moose Decoration

🦌 Nordic Elegance Meets Printing Perfection Bring a touch of Scandinavian Christmas magic into your home with this beautifully designed moose model. This figure is a tribute to the majestic tranquility of the Nordic forests and adds a…

Downloads
2,641
Likes
605
Rating
4.9
P
PrintablesAx

loose-leaf binder / paper clip

Single & Double you can bent over the loops and stack a different ammount of paper together. scale in Z for more capacaty. replaces common paper binder with metal flaps or paper clips. Print Settings: Printer: Prusa i3 Material: PETG /…

Downloads
2,432
Likes
360
Rating
4.4
P
Printablesudrek

Articulated Goose

A fun little articulated goose that I mad after seeing a model that I really wanted… but I would have to pay for it :P So like a true 3D modeler I got to work designing my own. I think it turned out great, and it is completely print in…

Downloads
2,367
Likes
639
Rating
5
P
PrintablesPhilipp
Downloads
1,876
Likes
251
Rating
4.89
P
PrintablesLoboCNC

Gooseneck Glider (Rubber Band Launch)

After designing my business card glider , I decided to try an all 3D printed design. Taking a lot of inspiration from exosequitur's collection of gliders , I came up with this smooth gliding design that just fits on the bed of a Prusa…

Downloads
1,752
Likes
173
Rating
5
P
PrintablesP. Phienphanich

Hong-Thai Booster

Enhanced Accessory for the Hong-Thai brand Compound Herb Inhaler. This add-on is meticulously designed to provide users with an innovative and alternative method of inhalation, enhancing the overall experience. There are 2 versions of…

Downloads
1,749
Likes
59
Rating
5
P
Printableselectrosync

Seat Belt Buckle Fidget Toy - Choose Your Style

Model Seat belt buckles have a pretty satisfying mechanism, but it’s not a great idea to play with them on the road! Now you can 3D print your own fidget and desk toy to play with anytime that you want. The design features a double action…

Downloads
1,748
Likes
294
Rating
4.56

Flashforge Adventurer 5M (AD5M) Printed Camera Mounts (two to choose from) v1.0

Both of these two models can serve as a drop-in replacement for the Flashforge injection molded camera mount, which is stock on the AD5M Pro, and can be ordered from Flashforge's website for use on the AD5M (non pro version). One of the…

Downloads
1,697
Likes
254
Rating
5
P
PrintablesRedTurtle

Weighty Goose from Untitled Goose Game

In order for this rude goose to be able to hold heavy things, it needs a heavy butt. I modified gynni's original with a cavity inside suitable for heavy things, like your collection of small metal bells. Update: gynni released an updated…

Downloads
1,551
Likes
319
Rating
4.67
P
PrintablesKolbi

21 Easter Cookie Biscuit Gingerbread Cutters (butterfly, cat, egg, flower, hen, chick, rabbit, sheep, bunny, duck, duckling, goose, hen, chicken, lamb, rooster)

Easter Cookie Biscuit Gingerbread Cutter (approx 50-60 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…

Downloads
1,425
Likes
221
Rating
5
P
PrintablesTombry

CS:GO Karambit with looser tolerances

I have printed the original from Dani Projects and as I wanted to glue the handles together, they wouldn't close fully. So I added some distance (total 1,2 mm) to them and it worked like a charm with no need of cleaning up. Use supports…

Downloads
1,305
Likes
89
Rating
5
P
Printablesthe_21_HER0

Moosstab Mittelalter Turm / Moss pole middle age tower

ein Moosstab der wie ein Mittelalter Turm aussieht

Downloads
1,266
Likes
226
Rating
4.75
P
PrintablesLoboCNC

Stackable Loose Tea Dispensers

These stackable tea dispensers hold 25 teaspoons of your favorite loose tea and dispense them one teaspoon at a time with each pull of the sliding “drawer”. The last cross-section photo show how the slider cavity fills up when the slider…

Downloads
1,184
Likes
971
Rating
4.7
P
PrintablesMZ4250

Moose Miniature

This is a remix of the model located here by lodkylo : http://www.thingiverse.com/thing:191957 Its a moose perfect for a tabletop game as a mount. Print the body as is with supports and a raft. Print the head with supports and a raft as…

Downloads
1,160
Likes
119
Rating
5
P
PrintablesMZ4250

The Untitled Goose

Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…

Downloads
1,155
Likes
139
Rating
4
P
PrintablesBarelygud

Keyboard switch fidget (1 to 3 switches to choose)

If you love fidget toys and keyboards, just one of those things, or simply want something quick to finish your filament spool, this is the model for you. I designed this fidget switch toy that only needs 1 to 3 mechanical keyboard…

Downloads
1,151
Likes
64
Rating
5
P
PrintablesJustMaiaMakes

Silly Goose Challenge Coin

ONLY PRINT IF THE RECIPIENT IS A SILLY GOOSE! Looks good in gold silk pla. Hjonk

Downloads
1,123
Likes
235
Rating
5
P
Printablesaveluru

Aoostar R1/R7 NAS PC 120mm Fan Base

Extends the profile of the AOOSTAR R1 and R7 2-bay NAS PCs to add a 120mm fan. I split off the CPU fan header (with a standard PWM fan splitter) as the chassis header doesn't support PWM and outputs 12v continuously. Screws into the…

Downloads
1,081
Likes
52
Rating
5
P
PrintablesDrKronos

Swoosh! The electric tea light Flyer

6mm diameter, 3mm height magnets hold the two halves of the Flyer together. As a display piece they are optional. Use a piece of wire to hold the Flyer over the base at a height and an angle you like. Blender file included. Print the two…

Downloads
1,074
Likes
648
Rating
4.96
P
Printableslifoprint

Flexi Moose

This is my first attempt at making a flexi animal. I hope it works for you. I'd love to see some of your makes. Print Instructions: Printer: Bambu Lab P1P Supports: No Resolution: .012mm Infill: 15%-20% Notes: Filament: Polymax PLA at 230…

Downloads
1,016
Likes
138
Rating
4.77
P
Printablesstuckpixel

MTG Cube | Jumpstart Reusable Booster Pack

Enjoy cube drafting? Or maybe Jumpstart? Print some of these! Very low filament utilization (~20 g per inner/outer pair), fits 15+ double sleeved cards, or 21+ single sleeved cards easily. I printed with a 0.6 nozzle in PLA. If you're…

Downloads
981
Likes
91
Rating
5
P
PrintablesKlaus

Wall mount for type 2 plug and Juice Booster 2 (electro mobility) - Wandhalterung für Typ 2 Stecker und Juice Booster 2 (Elektromobilität)

You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…

Downloads
970
Likes
71
Rating
4.82
P
PrintablesLiam West

interlocking goose model

For the best print possible I recommend using the original body, paired with the v2 beak (tighter tolerance), and the v2 feet (stronger and easier to balance). And for the feet I recommend painting supports on the floating area of The…

Downloads
936
Likes
524
Rating
5
P
Printablesdkrnet

DUMMY 13 - Hang-Loose/Call-Me Hands

Hang-loose or call-me hands for DUMMY 13. 2024-05-10: Updated to add webbing between thumb and palm for a more natural look.

Downloads
933
Likes
220
Rating
5
P
Printablesthe_21_HER0

Moosstab Monstera Dubia / Plant Support / Moss Pole

I have a new version ! Ich habe eine neue Version! Ein Moosstab für die spezielle Wuchsart der Monstera Dubia. Kann natürlich auch für andere Pflanzen genutzt werden. Der Moosstab ist steckbar. Habe es mit Support gedruckt. Meine…

Downloads
928
Likes
253
Rating
5
P
PrintablesWilko

Cookie Cutter Moose (2x1)

We all love additive manufacturing (aka 3d printing) because it creates so little waste. But what should I say. At least there is one subtractive process where the waste can be processed further. Cookie dough + cookie cutters ;-) To get…

Downloads
907
Likes
170
Rating
5
P
PrintablesTHop3D

Nature Wall Art with 2 deer and 3 mountains 600x300mm + loose parts cut to 200x200

Nature Wall Art with 2 deer and 3 mountains The full model is 600mm wide, 300mm high and 3mm thick. There are also pre cut parts so it can be printed on smaller printers 200x200 and can be assembled later. I suggest assembling with glue…

Downloads
890
Likes
212
Rating
5
P
Printablessh

😎 Party fun "nerd" glasses with interchangable lenses (choose your own pattern)

Info: I remodelled original “nerd glasses” from @Miguel (thanks for the model!) the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…

Downloads
881
Likes
124
Rating
5
P
PrintablesSymbiance

Goose Goose Duck Figure

🦆 Goose Goose Duck Figure 🦆 This little sculpture is based on the characters from the videogame “Goose Goose Duck”! I really enjoy playing it with my friends, you should give it a try too! The model is about 100mm big. Has to be printed…

Downloads
878
Likes
214
Rating
4.25

Dyson V8 Spacer (Fixes Loose Attachment/Wand)

Is the wand on your Dyson vacuum all loose and jiggly? Well, this is just the fix. Designed to fit into the wand end and take up some of the slack. Over time my Dyson vacuum has worn out and become quite loose. I designed this spacer to…

Downloads
873
Likes
46
Rating
5
P
Printablesrtm

Moose Trophy Key Hanger

I was looking for a good key hanger design for a while. And when I had stumbled on a MorenaP 's moose model I knew that was it right away. And a few decorations made it look more suitable for a interior. I used the double-sided mounting…

Downloads
843
Likes
157
Rating
4.86
P
PrintablesOdinson

Sexy Rooster

Please “like” to keep my uploads free. Sexy/Suggestively Seductive Rooster. I scaled it up and printed in parts to create the large version in photos. NOTE: The stl file is fairly small. Be sure to scale it to meet your desired outcome.

Downloads
842
Likes
157
Rating
5
P
PrintablesJace1969

Predator Heads,/ Helmets & extras "Choose Your Favorite"

I finally took the time to tidy up my Predator file data base all of which were .PDO's that I have been collecting over the past several years. Unfortunately I cant give credit to the original designers because I no longer have access to…

Downloads
816
Likes
78
Rating
0
P
Printablesnickcin

Snap Ball Socket Joint Link - Gooseneck Articulated Arm

This is a small (about 16 mm tall) ball and socket joint link that snaps together to create a long flexible arm. A small amount of force is needed to snap the pieces together. There is a 4mm hole in the tip of the end of the ball to allow…

Downloads
812
Likes
117
Rating
4.67
P
PrintablesRhylo Night

Entitled Goose from Untitled Goose Game_modified

Update (2023/7/13): Added the “WithRegister” variations for the TopBody and BottomBody The RegisterCube can be used to align the top and bottom body when gluing the two parts The RegisterCube is 0.2mm smaller than the register holes,…

Downloads
808
Likes
212
Rating
4.88

Improved, new, reusable zip ties! 4 lengths to choose from, batches included, PETG recommended, but PLA works too, v2.0

Print one-offs as needed or use the included batch sets to print either: 20 regular zip ties (~170mm length) 16 long zip ties (~198mm length) 2 longer and 1 longest zip ties (~252mm x2, ~276mm x1) Note: all models and batches assume a…

Downloads
795
Likes
124
Rating
4
P
Printables3D KIMBA

HexDish SignalBoost: Amplify Your Phone Signal Outdoors

HexDish SignalBoost: Amplify Your Cell Signal Outdoors The SignalBoost HexDish is a modular parabolic reflector designed to enhance cell signal reception in remote areas like forests, campgrounds, or anywhere with limited coverage.…

Downloads
769
Likes
689
Rating
5
P
PrintablesChip

ProosaXY (MK3/S to corexy conversion)

Re-use most of the MK3/S to convert it into a CoreXY machine. Build volume : 250x210x210 Semi-enclosure by default. (Full enclosure parts will be added later) Triple Z (independent or sync based on controller board) by default or dual…

Downloads
752
Likes
583
Rating
0
P
PrintablesMZ4250

Goose Hydra for the Prusa Printers Tabletop Game Competition!

This model has been submitted to the Prusa Printers tabletop games contest! Just to show it fits the Criteria its: Printability : Been printed in FDM and resin. Here is a gallery of my patrons who have printed it in both materials:…

Downloads
747
Likes
244
Rating
5
P
PrintablesDaniel Rowland

Fanatec CSL DD & DD PRO Boost Kit 180 (8NM) Mount - Series 15 & 40 Extrusion M8 Bolts

Mounting solution for the Boost Kit 180 (8nm) power brick for the Fanatec CSL DD & DD PRO to Series 15 & 40 aluminum extrusion with M8 bolts and t-nuts. Print two mounts The Series 15 that I modeled the mounting to is from tnutz.com and…

Downloads
740
Likes
95
Rating
5
P
PrintablesFdes21

MTG Booster Pack Dispenser

This dispenser is big enough to hold 15 card draft packs and 12 card set backs. Set packs fit a little bit more loosely. Printed on the Bambu X1C with .4 mm nozzle with .2 mm layer height on standard speed with supports for the bottom…

Downloads
725
Likes
64
Rating
4.67
P
PrintablesStormTimber

Moose Statue (3D Scan)

This is the 3D scan of a Moose statue I bought at a yard sale one day. The big one is the original and the smaller black one is the 3D scanned copy. I Recommend printing him sideways so the supports don't get stuck on the platform the…

Downloads
686
Likes
61
Rating
5
P
PrintablesSwotariCZ

Rooster

Design Concepts This rooster statue captures the elegance and stature of the bird, featuring intricate feather detailing and a proud stance. Objectives Ideal as a home decoration or as a collector's piece, adding a touch of rural charm to…

Downloads
682
Likes
60
Rating
5
P

Chicken/Rooster Keychain

Simple chicken key chain I made for my mom who raises chickens. One with key loop another one without in case someone wanted just the chicken design. Very easy and quick print no support, no brim, 20% infill, standard quality using cura

Downloads
680
Likes
57
Rating
5
P
PrintablesN Grim

Moose antlers

Inspired by Old_Tekkie's antler scan (with Kiri Engine) i decided to do the same. Some 42 years ago we found this very nice (swedish) moose antler, hanging in a tree! We never found the other half, but thanks to modern technology (Kiri…

Downloads
662
Likes
67
Rating
0
P
PrintablesBruno

Creality K1 Side Fan Duct booster mod

You can use the original screw that come with it and it will work very fine, but if you want, you can put an insert too. You can use your cam in the original spot without any problems too. The air flow inside is distributed perfectly and…

Downloads
615
Likes
82
Rating
4.67
P
Printablessh

🕶 Party fun glasses "smart-ass" with interchangable lenses (choose your own pattern)

Info: another model of glasses with interchangeable lens with different patterns the nose area is more comfortable temple hinges are robust, with usage of piece of 1.75 filement as a “screw” UPDATE : i created also temples more angled, so…

Downloads
614
Likes
71
Rating
4.5
P
PrintablesAustin Vojta

Adidas Ultraboost 3.0 Shoe

This is from a size 11.5 (not to scale) Adidas Ultra Boost 3.0 in Trace Khaki. Should be moderately easy to 3D print given you use some support for the lace aglets. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter…

Downloads
612
Likes
72
Rating
5
P
Printablesaussie-printing

Chook and Goose Egg Tower

Goose and Chook Egg Tower There are two different lengths: 400mm. and 230mm. Eggs per layer: 230mm. 12 chook eggs or 6 goose eggs 400mm. 24 chook eggs or 12 goose eggs Crossbrace requires a M3 bolt. *Chook and eggs not included

Downloads
612
Likes
24
Rating
0
P
PrintablesGerlach3D

Moose One Line Art Model

Since you liked the deers so much, I decided to make a moose, too. Can be scaled to whatever you want. Just look for the perimeter thickness, so that it is still printable.

Downloads
607
Likes
180
Rating
5
P
PrintablesRuralRoots3D

ROSCO THE ROOSTER

Supports required! Edit: I recommend using Tree supports, and utilizing a support blocker between the two toes. This will help make supports not cross between the feet! (see image of support blocker between feet if you need some help.) If…

Downloads
582
Likes
57
Rating
5
P
PrintablesStigern

Adorable Moose Keychain Charm

Adorable Moose Keychain Charm – Cute & Compact Companion! Bring a touch of woodland charm wherever you go with this delightful Moose Keychain Charm ! Designed to melt hearts, this mini moose features oversized eyes, a chubby body, and…

Downloads
581
Likes
101
Rating
5
P
PrintablesShopTeacher

Tornado Foosball Guy

Tornado Foosball Guy A foosball replacement guy based on Tornado brand foosball tables. If you plan to use this on a foosball table, print with a large percentage infill with a strong material. These guys take a lot of abuse. Tornado…

Downloads
577
Likes
27
Rating
5
P
PrintablesGigaPenguin

Turbo Boosted Tune Up Shop (Generic 1/64 Shop Display)

Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…

Downloads
575
Likes
188
Rating
5
P
Printablescybercanvas

Moosehead Bridge

This popular bridge head design works great when printed in ABS-like resin. I've been using one for our twice weekly games for over a year now. Loving it.

Downloads
569
Likes
50
Rating
5
P

TurboGrafx16 (TG16) & PC Engine AV Booster housing (mini-IFU)

(if you have printed this earlier, as of 12/27/22 there is an entire new version out!) Mini-IFU (v2) Print There are 2 versions of the “Connector_Bottom” you can print (you only need one!). _v2 requires the additional…

Downloads
566
Likes
56
Rating
5
P
Printablesanventia

SpaceX Starship Super Heavy Booster (Block 2) (1:144 Scale)

This is a 1:144 scale model of SpaceX's Super Heavy Booster, the first stage of the Starship rocket! It measures at 62.5mm in diameter and the booster + Hot Stage Ring is ~ 490mm tall! This is “Block 2” of the booster! Ship can be found…

Downloads
552
Likes
148
Rating
5
P
Printablessh

🚀 Lego DUPLO SHUTTLE compatible external tank and booster rockets

Intro: my kid is a lot into space shuttles and have an original Duplo space shuttle ( https://www.lego.com/en-gb/product/space-shuttle-mission-10944 ) so I created for him attacheable orange external tank with booster rockets (real…

Downloads
552
Likes
107
Rating
5
P
PrintablesTony

Martin Goose Cookie Cutter

A simple martin goose shaped cookie cutter. Martinsgans Ausstechform

Downloads
542
Likes
89
Rating
4.89
P
PrintablesPrintium 3D

Dummy 13 - Fixing Loose Joints

Has your Dummy 13 been “Chalk Lined”? Too weak in the knees to even stand up? After printing your Dummy 13 or other articulated model, you may have a loss in stiffness of the model when the 3D printed joints wear or stretch. This can…

Downloads
542
Likes
306
Rating
5
P
PrintablesGonzoStrange

Cooling Fan Booster (Velocity Stack) 20/25/30/35/40/45mm

In my research about exhaust and cooling fans these things work by normalizing turbulence created by the fan. When on the exhaust side air presses against the walls of the cone and eliminates the air from swirling back around the blades…

Downloads
541
Likes
54
Rating
4.67
P
PrintablesMZ4250

Dragon Moose

Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…

Downloads
538
Likes
135
Rating
5
P
PrintablesIbstickboy

Swimming Goose (Untitled Goose Game)

Remix of @Cats goose model to not use the flimsy legs. Instructions for assembly of the eyes and beak are the same as the original.

Downloads
532
Likes
65
Rating
5
P
PrintablesReleud

Aoostar WTR NAS R1/R7 cooling improvement

Screen to improve ventilation of the mini PC case. PETG. Layer 0.2. Infill doesn't matter.

Downloads
532
Likes
19
Rating
0
P
Printablesplocnik

Silly Goose Certificate

In dimensions of a standard credit card, but 1mm thick, whereas standard is around 0.8mm. Not to be used with malicious intent. 2.6.2023: Now updated with a lanyard hole.

Downloads
529
Likes
93
Rating
5
P
PrintablesFlexiMania

Flexi Goose Articulated Print-in-Place Goose

🚀 START SELLING 3D PRINTS TODAY 🚀 Unlock the full FlexiMania library + Commercial License and turn your printer into a money-making machine. ✔ Sell legally ✔ Unlimited access ✔ 3 new models every week ✔ New viral models every week 👉…

Downloads
524
Likes
119
Rating
5
P
PrintablesWolvie

Loose Wheel Nut Indicator

I wanted to do something to increase a safety on roads... So I upgraded and remodeled a Loose Wheel Nut Indicator to everyone, who have a truck, delivery truck, trailer or big pickup. I remodeled a great model by FullSendFab from…

Downloads
521
Likes
31
Rating
0
P
PrintablesDJK

Protective housing for 1800W boost DC-DC converter

Print in any setting, insert converter and tighten it down with 4x M3 screws.

Downloads
520
Likes
42
Rating
5