Counting matching models…
This version of the Drill Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This is a collapsing sword designed to be printed as one part. Its only 140mm high when printed but expands to over 860mm in total length! This version of the Jian prints complete all as one part. The Replaceable Blade Version is…
If you can successfully print this with NOTHING attaching the rings together, then you should be able to successfully print the print-in-place version or the blades concentrically. There is a new “clearance” test print, you can find here…
This version of the Master Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This design is my attempt at creating the ultimate 3D Printable BOTW Master Sword. This Master Sword was meticulously designed in Fusion 360 so that all parts can be printed without support material, and the final piece can be assembled…
The Ripper mask, an iconic piece of chaos from Borderlands 4 , is now available for 3D printing. We've designed it with handy attachment points for straps, making it easy to create and wear. AVAILABLE NOW! Get your copy of Borderlands 4…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
REPRACK 2 IS HERE!! NOTE: We now have a CLUBS page for exclusive RepRack upgrades like our Parametric Modular Shelving, RepRack XL as well as other cool stuff. PLEASE consider joining to support more development of this handy storage…
Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course. The following Makita tools have been tested so far in the 40mm version: Makita DTD171 Makita DDF484…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
To download the latest version click on the link. Organize all your workshop cables. Organize all your home and office cables. Organize your desk. version For small and medium sized cables click here or on the link.…
Printing: Print can be done with rough settings, 0.25mm with a 0.4 nozzle are fine to go. The "Roller" part needs support for the lower side, since they have to be printed standing. Assembly: Just smack both halfes together, placing one…
Hi everyone. I'm P1lotz and I am a Danish student, and I really like to make 3d models. This time I have made a dragon-themed recorder. I made it for my Mother to moms Day. It does not sound perfect, but it is a pretty fun print and looks…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
katana s desingem Naruto
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This model has been nominated for the Printables Awards 2024 in the category 'best 3D Model in Multi-Material Design'. Thank you for your votes! Summary This is a model of a Ford Shelby Mustang GT500 'Eleanor' in a kit / gift card style.…
Model description Concorde was the first commercial supersonic passenger airplane, built jointly by aircraft manufacturers in Great Britain and France. From 1976 to 2003, it halved the time it took to cross the Atlantic Ocean by flying at…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Original Model by Mr_Andre https://**********.com/en/models/1033319-stainless-katana-sword-print-in-place#profileId-1016589 Design Concept This red column features a unique stackable design that can serve as an intriguing display piece or…
Honeycomb storage wall with borders for mk3/4 size.
A nordic run symbols inspired plant pot. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower layer…
Support me & Join Printables Club
You need TPU to print this beautiful one piece musical instrument. Empirically tested to be a very good way to annoy your partner! How to print: Print the holey side on the print bed. I recommend printing it with 100% infill or enough top…
je potřeba prolomit první vrstvu u čepele
This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
It's been exactly 5 months since I published my first 3D print design. Back in August, I uploaded my design for a fully 3D printed Master Sword from The Legend of Zelda: Breath of the Wild. I had been working on that design on and off for…
This model is a full-size replica of the Narsil Sword. Comes in 2 versions - whole and broken. This is a digital 3D printable model of King Elendil’s longsword Narsil, which was later reforged for Aragorn into Andúril. The download…
Finger diameter at base is 17 mm. Scale a model so that it suits your needs! High Quality OBJ - mm
Bonjour, Voici une épée dépliable, un projet qui m'a beaucoup amusé ! ATTENTION : Vous ne pouvez pas vendre ni le modèle imprimé ni les fichiers numériques ! Pour une licence commerciale merci de me contacter par mail à…
Extension cord holder, easy to print! Mounted using screws D=3mm. Customizable using the STEP file. :)
Been working on this for months for my son during my spare time. Master sword with a telescoping blade. The blade pieces can be replaced as the top of the pommel screws off. The hilt is modeled after the Master Sword from Breath of the…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a collection of fun and unique…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
Turn old filament spools into a functional cord wrap easily! Originally design with Prusament spools in mind, but updated to include an option for generic spools as well. There are three different ways you can build the cord wraps. Just…
Summary This is a model of a Ford GT 40 (Le Mans) in a kit card style. Some characteristic details can be discovered. Equipped with seperate exhausts ;-) After printing, the model can be assembled with the help of integrated connectors.…
This model of the iconic Bronco has working suspension and wheels that spin, doesn't require any support material and comes preassembled right off the buildplate. The only thing you have to do after printing is to snip off a few tiny…
I created this model of a Border Collie with recap 360. Color image is the original dog. 29-4-2016: Updated the model after fixing it with Make Printable Instructions Sliced with Cura layer height 0.2mm shell/top/bottom 0.8mm fill 10%…
Remix designed for use with the Bambu Labs AMS, colors are as accurate as possible to BD-1 in Fallen Order (see reference images) using White, Red, Silver, and Black PLA (PLA+ is recommended for the Body and Silver color, as some of the…
This is a two handed sword for Dummy 13 inspired by the Dragon Slayer sword from Berserk. It is about 140x16mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out MattoDesign's…
Allows you to connect two Beyblade X Ripcord Launchers for solo play or Bey testing. See images on how to connect launchers together. 3, 2, 1, Go shoot! This was modelled by me and is free for everyone to use and share. Please don't sell…
Keep your small essentials organized, safe, and stylish. This 3D printed EDC (Everyday Carry) container is designed with a focus on tactile feel and rugged utility. The detailed knurled texture not only provides an excellent grip—even…
I cut the model in half for easier printing, superglue the two halves together to complete it. Also erased more of the hilt so it could sit deeper in the book and be less likely to fall out. I personally liked printing this at 130% with…
UPDATE 16/01/2024: i've noticed there were a gap of ½ hex… sorry if you already printed the ANGLE A, it need to be re-printed with the fixed versione i've uploaded. UPDATE 16/02/2024: added folder with other filler size, in case you are…
Badge displaying the Ford logo Print instructions I recommend printing the badge with a mid-print colour change, so that the letters can be seen clearly seen against the background. Instructions on how to do this in PrusaSlicer are…
Here's a simple coaster set for your listening room. Centers snap in but can be glued if you want. PLA Pro .2 Layer height No supports If you like, Like. Rock on and enjoy.
Border pieces for the fantastic Honeycomb storage wall to give a “crisp” look to the edges. The pieces were designed with the mk3s base file ( wall-honeycomb-224x190sizemk3s.stl ). The models needed depend on the number of panels you're…
The source marked this model as adult content.
This is a collapsible sword that is similar to other models that can be found on this site. Choose between two different designs, a sword or lightsaber. Everything can be printed without support. The size is more aimed at children, but…
looks great in any color. awesome for all costumes whether it's a zombie or steve.
As seen on X and YouTube: Disclaimer: This is an acoustic model. As such, it does not scale, nor is it compatible with drivers other than the ones specified. Scaling / incorrect driver(s) will result in significantly diminished performance.
BOR SG Rifle from Borderlands 4 AVAILABLE NOW! Get your copy of Borderlands 4 here.
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Printing The model can be printed without supports. Print it in your preferred material depending on the intended use and mounting location. Assembly Mount the holder to the wall or another suitable surface using 3 × Ø4 mm screws. Once…
Description If the “pen is mightier than the sword”… why not have both for insurance? This simple mod to the classic Fine Point Sharpie adds a new aesthetic sure to please your medieval enthusiasts. This does not replace the existing…
3D print or lasercut pegboard and insert base. you can also use the insert baseplates as universal mount to glue or screw on already existing original tool holders like bit holders, drill sets and stuff. the insert base is designed for a…
Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…
“Freedom is the right of all sentient beings.” - Optimus Prime I recently rewatched the 2007 Transformers movie and I thought that Optimus' Energon sword arm that he used to absolutely brutalize Bonecrusher, and I just had to make it for…
Now takes less time and Modified to print with less amount of filament. Design works with Ender 3 Mod Pro By SathyaResearch 3D Printers. Originally designed by Volf. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint
Fish with collapsing sword inside. You can use 8x2mm magnets for head attachment. I recommend printing it from petg for better durability. Happy printing!
Hello, I tried to make a Lord of the Rings themed book stand and this is the result.
Geralt's sword from the first episode of the Netflix series. Divided into nine life-size printing (estimated) For the first time I'm making a prop so I hope it works out www.prusaprinters.org/prints/16432-wall-mount-for-geralts-sword…
You don't need any supports or edges. All you have to do is glue the head and fin and the outer parts together. Filling: 15% Expansion: 2 If you want to support me, join my Patreon. https://www.patreon.com/Flexi__Maker Do not publish,…
The Nordlinje Series brings a sense of calm, simplicity, and clean lines inspired by Nordic design to any interior. These modern planters combine subtle elegance with functionality—their distinctive stripes add visual rhythm and a…
inspired by the popular ones, i made this myself because i want to sell them. make sure your settings are perfect.
This is a digital 3D printable model of Sir Radzig Kobyla's sword carried by Henry in Kingdom Come. (Fan-made, unofficial, non-commercial artwork.) The download contains pieces of the model ready to be 3D printed on a 200 mm print bed…
katana s desingem the witcher na hraní či na dekoraci
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
Minecraft sword converted into a toothpaste or cream squeezer. Choose from 12 variants: four styles with either flat or pixelated texture top, original or smoothed corners/edges, each in three slit thickness options: 1mm, 1.5mm or 2mm.…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024:] Added versions without the 2…
Lord of the Ring - The One Ring dice bowl by Skar84 - Thingiverse This is a reupload because of course thingiverse is so broken the page and file is gone AND you cant even log in anymore. All credit goes to Skar84
He-Man's Powersword will give you the Power of Grayskull! One version is 100% 3d-printable without any need of additional hardware. The second version is designed for a 10mm rod as stability-insert.
Stackable Cable/Cord Winder Organizer These stackable cable organizers let you wind up your phone and device cables easily for storage or portability. Coming in at multiple sizes depending on the cable thickness and length you have. Keep…
Haven't been able to find a .3mf for Bambu. Took a while to color, its not perfect but it is close.
Bring the magic of the Minecraft universe with you wherever you go! Whether you're accessorizing your keys, backpack, or workspace, these unique keychains are a fun, practical way to showcase your passion for the game.
DAD AR Rifle from Borderlands AVAILABLE NOW! Get your copy of Borderlands 4 here.
The model can still be print in place and print the cap separately. For those having difficulty printing the blades in place these can be printed separately too, just printing the broken section.
Behold the majestic loaf, the feline monarch of indifference, the absolute unit: Lord Chonkington the Unimpressed. This hilariously rotund kitty is equal parts adorable and apathetic, with more rolls than a bakery and a gaze that silently…
Edit: Added a Multi Material version of the sword. It is a 3mf generated in Orca slicer for a Bambu Lab printer. I have labeled the parts with proper names and colors for other printers. Remix of my Master Sword sized to fit into Dummy 13…
This vinyl record stand is designed to showcase a single record sleeve. It's a great way to display the record that you're currently listening to and add a touch of style to your home audio setup. I always appreciate makes, it's awesome…
Explanation step by step [ENG SUB]: Print settings : Layer 0.1mm or 0.2mm - 6 layers top and bottom - 4 layers perimeter - infill 0% (for the ring) infill 50% (for the bases) IMPORTANT : You should print the ring in WHITE or TRANSPARENT…
I made a Minecraft Sword for my kids. Very easy to print and glue. Please see the photos for printing and assembly instructions I hope you guys enjoy it.
This is a sword for Lego Minecraft. There is an upper and a lower part. Stick them together with glue after printing. Update 11.7.2022: I added a “LEGO fit” Version which is scaled down. It fits now for LEGO Minifigs.
This collapsing sword is designed to be printed as one part. The multi-part and the single-color replaceable blade versions are available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
Here is the Minecraft Sword that was featured in A Minecraft Movie, ready for you to create, explore, and survive! Printing Use decent infill and wall perimeters for good durability, and print accordingly for best physical structure.…
This model of the Ford F-150 Raptor has working suspension and wheels that spin, doesn't require any support material and comes preassembled right off the buildplate. The only thing you have to do after printing is to snip off a few tiny…
Inspired from the anime Bleach, this skull hairpiece with katana stick is modeled off the mask worn by character Nelliel Tu Odelschwanck early in the series. Perfect accessory for Renne faire. Sword handle prints separately and will need…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services.
This is a nordic inspired ring It was made for the PrusaPrinters 3D Contest and more Version are coming soon but i dont think i will be able to upload them in time for the contest. I rather recommend a SLA Printer for this print but i do…
This is my silliest design yet, but fun to play with anyways :-) It is a collapsible sword (or lightsaber, or magic wand), that is small enough to fit in a pocket. After printing, inset the 5 parts of the blade into the hilt and close it…
Update 30/06/2025: Image refinements. Update 4/12/2024: Added two sections for a shorter, broken version of the blade. I printed these parts using a 0.25mm layer height, using silver silk PLA. I recommend organic supports where needed for…
This model provides a convenient and efficient way to store and access various cordless drills under a shelf or a hanging cabinet. It is a simple, practical, easy to print, and nice looking solution as it saves space, reduces clutter, and…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
"The One Ring" from the book/movie "The Lord of the Rings" also known as the Master Ring forged in the fire of Orodruin, also known as Mount Doom and printed with Prusa Mini. It is smooth, narrow and made of a metal that looks like gold,…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This is a longsword for Dummy 13. It is about 100x22mm and 3mm thick. I recommend using the “0.15mm Speed” profile in Prusaslicer, no changes needed. Also check out the rest of the arsenal I made, the files can be found on my profile :)…
![#0164 Mini Paracord Winders for the Pack [4 Variants]](https://media.printables.com/media/prints/882186/images/7020696_f2dda904-3cb0-4d82-af08-0a6562f1fddf_366f2abf-6147-415f-ab10-7b27d3b84067/rl-20240621-017.jpg)
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord)](https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg)
