1,608 models
Ever Thought “I wish I had somewhere to store my USB drives and SD cards and have a Peg board”? WELL LOOK NO MORE!!!!! Fits perfectly onto peg boards and has space to organise many USB and SD cards And For the low low cost of $0.00 you to…
Print approx. €4.97–€6.08 excl. taxPreliminary estimate for PETGSource material: PET
It is spare parts for repair a broken closing fastener for stanley organiser. Dimension in pictures. Printed with PLA. Support not need. Model have build in supports, cut off them after print. Maybee add some brim if you got print…
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
Need to addmore storage to the Bunnings Australia/New Zealand Taxtix Organiser 12-Compartment 310mm front section divider sold at Bunnings Australia/New Zealand? This stops the little things from sliding and getting jammed behind the…
Print approx. €3.37–€4.12 excl. taxPreliminary estimate for PETGSource material: PET
Holder for Tupperware lids (for kitchen organisation). Big and small versions. Should fit most kinds of lids, but obviously YMMV. Can be printed without any supports if your printer can handle a little bridging (I printed the ones in the…
Inspired by https://www.printables.com/model/122378-cable-organizer-cable-clip I liked this design but: I want to organise larger cables (e.g HDMI, mains leads) I have cables of different lengths I want the clip to stay with the cable…
organiser with grid pattern and removable separator 2024-05-18 update · uploaded a simple lid, to meet a request photos show printed in black matte pla and brick red petg-cf 0.20mm layer height 10% adaptive cubic infill dimensions > x:…
01 - Summary A simple reusable tie fastener to organise cables and other long objects. It features 1-12 holes with lengths 40-205mm for great versatility. Unlike other cable ties, this puts ease of use first, with a simple fastening and…
I wanted to put all my Dremel accessories in the Dremel box, included in my new set, but the sponge inserts wasted soooo much space. So I decided to make it fit. First I tried to design a 4 piece design, but that would lack modularity, so…
I designed these spray paint can holders since every one I've seen is too blocky or doesn't work with all cans, so I made mine more organic and versatile. It fit most sizes (68mm in diameter or smaller cans). You can print for 4, 3 , 2 or…
This is an easy to print, cheap, and if I may say so, attractive way to ensure that you never again have to burrow through piles of PLA offcuts to get to a pen or pencil. With 3 different sizes of module available, you can create a desk…
its just a rough approximation of the inside of the Milwaukee Packout compact organiser case for you guys to edit for specific things you wish to put in it. I think i have seen something online but this is modeled by me and is far from…
organiser · reDesk modular modern minimalist organiser in a modular design with grid patterns you have two options for each of the base sections, being that one of them (insert_l_option1) is composed of box and lid (sliding lid)…
New Version 2 is available HERE This is a box that I designed to store and organise trading cards. The separators make it modular. Extra separators can be stored at the front and back of the box. If you have warping issues with your…
Shoe holder organiser Print settings 0,2mm layer 5 walls 15% infill no supports
Yet another toolbox for MK3. I didn't want tools hang on side of printer, so designed one what sits on top of PSU. Same size (footprint) as new, black, PSU. There is also add-on for taller items. It must be glued on. Print instructions…
I wanted to organise my IKEA ALEX drawers and I found this design by vwfan0178 , however, there was a lack of options, so, inspired by this design, I designed a couple more options. I also added a fillet to the bottom because I noticed…
The cables can be placed in the compartments without getting twisted. I printed this holder in PETG using a 0.6 mm nozzle with 9% infill and 3 wall layers.
Bin size at 100% scale: 220mm*220mm - can be printed on X1C, P1S, Core one (just about), H2C etc. Bins are scalable in the slicer, but fit will become tighter as the size decreases. Scale uniformly. Rounded bottoms of compartments for…
Printable container boxes for Festool Systainer Organiser (such as item number 204852). The sizes 25x25 and 25x50 are particularly useful for small components. Sizes in combinations of 25, 50, 75, 100 and 150mm. Larger variants can be…
Updated 17 July 2024 - Support for Multi Colour printing I was inspired by the concept of BuildBug's socket holders created in Fusion 360 https://www.thingiverse.com/thing:4696546 . But after a day messing around with Fusion 360 ( I'm not…
I include the STEP file in case you wanna modify them. This runner holder should fit most model kit runner.
Desktop Mini 3-Drawer Organiser Keep your desk, workshop, or craft area neat and clutter-free with this compact 3-drawer desktop organiser . Designed to store all those small items that are easily misplaced, it's the perfect addition to…
This is a transferred project from Thinigverse - creator: Evian_Arts Link: https://www.thingiverse.com/thing:4770922 Works as it should and makes the drawers more manageable. Running this on my own printer and I just don't like the color…
I designed this organiser for my girlfriend's Skadis board for pencils, brushes, scissors, etc. It has two “pockets” with dividers. printing preferences on BBL P1P: printed with Redline PLA 0,2 mm standard quality 20% infill brim auto…
Introducing our Exquisite 3-Story Table Organizer and Perfume Stand – a beautifully functional addition to your space! Crafted with precision and designed for elegance, this STL file brings convenience and aesthetics together. Easily 3D…
cloud box modular and with optional magnets to lock into position this is a modular design that consists of: base (use of 4mmx2mm magnets optional) main insert · 3 options secondary insert · optional pen holder (use of 4mmx2mm magnets…
To many spools and to many cables, two annoying problems any 3D printing enthusiast can probably relate to. Here's a solution that solves one and a half of these problems, using up a few empty spools and keeping a variety of cables neatly…
175x95mm base with 2 100m heights and one 140mm for larger paper
An aesthetically pleasant organiser that fits the (MG7715/65) Trimmer and all its accessories Designed to print super easy, just make sure the bottom is oriented to the print plate.
Remix of Barebaric's Wera Hex organiser, expanded to 6x3 for easier picking up, and now stackable.
Kitchen sink organiser with built-in drip tray/runoff, so water runs back into the sink so never needs to be emptied and brushes and clothes dry out. The base is universal and fits any of the tops, so you can mix and match colours or…
May also have other uses : pen holder, artist’s paint brush holder etc. There are two different top plate versions for this. Custom Top Plate The one shown in the photos is a custom top plate for my own selection of tools. This should be…
A Bookstand/Bookmark that also serves as a handy organizer for your nightstand. A practical way to hold your book and keep your page. It has a place for a few pens or pencils, a place for your glasses, a drawer for miscellaneous items.…
Citadel Paint Organiser if you are after a Dropper Bottle Paint Organiser please see my alternative here; https://www.printables.com/model/371857-dropper-bottle-paint-organiser ALL levels of both designs being this one and the Dropper…
Dear Zach Freedman, if you are reading this, I plunged into 3D printing after watching your videos, thank you for the inspiration! Introduction Here is another unnecessarily over-engineered project! I am just going to design with screws…
Designed to store 10 sizes of drills in bulk quantities, lengths were tuned for the Screwfix Erbauer 1-6mm trade pack of drills size. That pack includes the following size drills: Drill Diameter (mm) Drill length (mm) Compartment length*…
EDIT: uploaded v2 - lower height to 9 mm (enough) and adaptors with longer distance so you can put Thule back raiser in-between. We just bought Thule Urban Glide 2 stroller and actually the stroller needed some upgrades. Already found…
Small screw-fitted bracket that allows you to easily bundle cables together with a cable tie. Use multiple brackets under desks, countertops, etc to get those pesky cables under control. Print ‘on edge’ with PETG for best results. PLA…
Organizer for spice bags to pantry. Inspired by vanilka-box. This model has sufficient size for bags available in CZ.
Here is my drawer organiser. No supports required --- Version 1.0.1 upgrade: Fixed drawer separators-1.0.1-4LegHolderWithHinges
Each one uses 6x1, stacking them side by side gives you more slots. They can be used individually or in multiples Designed for generic screwdrivers as not everyone owns Wera screwdrivers.
This is the second version of my trading card organiser. You can find the first slightly smaller version here: https://www.printables.com/model/234051-trading-card-organiser The separator works for both versions but the boxes and lids…
Dropped and broken my hex bits organiser and decided to model a new one, stronger and more thought through design. Multiple boxes can be printed and they stack up on each other with embossed guides. Box is designed so that drawer clicks…
The high of the organiser is 42 mm, but you can easily scale with prusa slicer. The gap size is 3.2 mm. It accommodates panels which are 3 mm thick, whether meatal, plastic or wood. There are a total of 3 different elements, from which…
At home we have some food containers from a Tesco store (probably some rebrand). Unfortunately, none of the organiser models available from printables (and elsewhere) have worked well for us. So I logged into my trusty onshape account and…
Trying to declutter my desk and keep the things I use most to hand. This 3 part model holds a Phone / Stylus / Pencil / Pen / Ruler plus other bits and bobs. Uses just over 80g filament and takes around two and half hours to print. Just…
A simple holder for the Ikea Skadis system to organise thread reels
The ends fit with a good friction fit from my printer, otherwise, a dab of superglue should help. No supports are needed if ends are printed flat and the main body is printed on end.
I used this store everything i need for model building from the Nippers, Tamiya cement, Mrhobby, Panel Line, and others things. This model is designed with Madworks Sponge Sandpaper for the sandpaper holder. I will include the STEP for…
prism · desk organiser modern minimalist modular desk organiser notes: make sure your print bed is clean to ensure proper adhesion, if you tend to have adhesion issues with large flat surfaces, either add a brim through the slicer or use…
This is a way to save the space on a desk and sort your docs by 3 categories. :) It is recommended to have a brim on as most likely it gonna pick up corners due to filament thermal expansion effect. Support creator here: PayPal me :)…
Here is a little 3D print to help organise your desk, just send it to your trusty machine, take it off the build plate, screw it under your desk and it's ready to go. i suggest using rafts to guarantee a successful print. If you need…
tiered organiser modular print with optional magnets to lock into position this is a modular print that consists of the following components: base (use of 2x 6mmx3mm magnets optional) top (use of 2x 6mmx3mm magnets optional) pillar x2…
lira small organiser with two containers and a base dimensions in mm: base ~ 180 x 80 x 6 circular container with lid ~ 52 x 52 x 60 open container ~ 90 x 47 x 30 includes profiles with all items separated and with colour grouping so that…
You can mount this print under a cabinet with double sided tape or mount it vertically against your wall. When its mounted just slide your capsules onto the “railes” Print Settings Material: Pla Layer height: 0.30mm Supports: No Print…
Finally sat down to create this little Euro coins organiser for myself, so coins don't roll around in the car anymore. I wanted to make something to fit to a cup holder in the centre console and be easy to pick up - with a handle. Fits…
Overview: This system utilizes standard, affordable ID cards or RFID cards and works seamlessly with any dry-erase marker. For optimal use, fine tip markers equipped with an eraser are recommended. System Features: 1. Card Storage :…
It is a simple, minimalist desk organiser with phone holder, pencil holder, some sections and a drawer. It is mountable on wall through the holes at back. On sides and back, there's thin inside extrude in which you can add RGB Light strip…
Cable holder that can be mounted on a Honeycomb storage wall. Thanks to the authors of the models :)
FESTOOL Systainer³ Case Organiser Boxes with tag holder
PLEASE - if you like this model, give it a like? Thank you! This Gridfinity drill bit storage tray is 4 x 5 standard (42mm) grid units, and 3 standard units height. It stores 18 different drill bit sizes. I made it for HSS 1.0 to 10.0 mm…
A simple lipstick organiser that fits into IKEA ALEX drawer unit. Link to the post .
Modular design allows volume expansion by stacking “cable-roll-ext-thewhatbrandsg.stl”. Suggested print settings: Layer height 0.2mm. Infill 15%. Perimeters: 5 (for strength). No supports are needed but follow the suggested print…
Modification of the desk organiser without sd card slots. Original model by Sisul Desk Organizer by Sisul | Download free STL model | Printables.com
These are designed to fit into the existing trays so you can split the volume into two sections, the inserts come in small and large and single compartment or double or quad. The tray sits about half way down inside the original tray…
If you like the model please support me on cults and buy the complete package! https://cults3d.com/en/3d-model/tool/toolbox-socket-organiser the ultimate toolbox socket organiser! For quarter inch up to half inch sockets as a mechanical…
I designed this as I am always using my verniers at work and home, but never get round to putting them back into their cases to keep them protected. They just end up left on my desks where on day someone is bound to knock them off. This…
Organizer Office, easy print without support. Big usable drawer (inside size 155x 85 x 43,5mm). Size Base lenght x width x height 166 x 101,5 x 150mm. Wall depth Base 4,75mm, Inserts and Drawers 3mm. Bridges (Base) 11.4mm. E, F, G, H are…
This is a customisable organiser for everyday items like a phone, headphones, keys, wallet, letters, tablet etc. I designed this for the the “Catch All Trays” contest as this seemed like a nice practical project. Problem with coming up…
Holds 4 cables. Print with 20% infill 0.2mm layer height
Phone Holder + Desk Organizer Desk organizer with phone holder. Phone holder can be adjusted to 3 different angles. Includes modular dividers. Print Settings Prints without supports 15% infill 0.2 Layer Height (Lowering the layer height…
Dies sind Halter für die More Zerup Sirup Flaschen. Für 2, 3, 4 oder 5 Flaschen. So kann ich ungenutzte Flächen im Schrank nutzen, und die Flaschen sind Aufgeräumt. Diese können ohne zu Schrauben in die innen Seite einer Schranktür, oder…
This is my easy-to-print organizer for all of my stuff. It fit the cabinet below my armrest perfectly. It can store a pen, some cash/coins and lots of other things you want to have with you and organized in your car. I printed it with a…
The insert will fit everything from the Lockdown Kickstarter, except the following: Door Tokens and Stands (The insert hold the 3D Doors) Cat (which is actually a racoon) and Rover Token (Insert has room for 3D models) The insert fits…
Designed for tissue boxes with sizes up to 225x112x68 mm. Print instructions Print without additional support, but you will need a utility knife to cut a slot for a napkin.
Simple fly tying tool organiser
This is a cover for a tissue box so that items can be placed on top neatly without falling off giving you more space. You can print multiple exchangeable tops, or customise to make your own. Looks nice if you print the two parts in…
Perfect desk organiser to include pens, highlighters, post-its and small items. To fit the base the box is scaled at 80% and the mushroom at 50%. I needed supports to print the tube, for everything else they are not needed. The mushroom…
These clips are desgined to fit to a 15mm thick desk. Feel free to send me a message if you need any dimensions or features changing to better suit your set up :) I found that printing the clips up right with supports and a raft (settings…
To store small parts, a half height 50x50mm box may be more convenient than a full height 50x25mm.
A Nespresso capsule organizer which can be attached to a wall or ceiling surface. This is a small variation from an existing model. I wanted to have an indentation to place a two side tape to make it “Invisible” This is a remix of…
Printed in individual parts so that no support is required. Fix the panels with a little superglue. Can also be printed completely, but then with supports.
A storage box for Pokemon trading cards that fits gridfinity base plates. Suitable for printing in two colours to match the colour scheme of the set. STEP / Fusion 360 files are provided to allow for customisation. Slots are compatible…
Original Model: https://makerworld.com/en/models/538757#profileId-455917 Modification: Extended the base and made a hook style to make sure the rear is supported and the front doesn't allow for the laptop to slide off…
I have made a very simple bottle organiser for in the fridge. Please note that i printed it with PETG because of the fact that you can clean this later on with water ;-) The GCODE file is from my printer with MMU2.
I love the Catch-All Tray design by HD , but I found the connectors and plugs too loose for my needs, so I rebuilt the connectors and plugs from scratch for a more precise fit with tighter tolerances. This allows the trays to be joined…
Hello, this is my design of Frostpunk board game insert, that fits into original game box. It adds dedicated space for board hex pieces and other small bits. Size of this insert is slightly larger, than “buildings board”, that is used as…
Simple talisman organiser for each player. You should be able to fit at least 2 of those inside the box.
Gridfinity Organiser for Wrenches (Maul-Ringschlüssel) Brand: (BGS) https://www.bgstechnic.com/Produkte/Aktionen/Werkstattaktion-09-2024-02-2025/Maul-Ringschluessel-Satz-SW-6-32-mm-25-tlg.html SW: 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 -…
My model, no remix Print instructions Category: Earrings Summary My model, no remix Print Settings Printer Brand: Anet Printer: A8 Rafts: No Supports: No Resolution: 0,16mm Infill: 100% Notes: Printed side down and with brim
Repost of the fantastic cable organiser for the Viture Pro, originally by spark3dprinting on Thingverse. Wanted to get a copy on Printables to create a Viture AR glasses collection. Note: original design was intended for printing in PLA.…
Use a strong print file with 4 walls and 20% infill or higher, print flat as is
Jdsfighter model gave us a great baseline design, but in the Australian version of the IONIQ5, the height of the rear part of the tray meant the cover wouldn't close. So we slightly tapered the design and also adding a few more…
I wanted a way to hang my singlestack magazines on the steel door inside my ammo cabinet, so I quickly whipped out this. It uses both M4 heated inserts and some strong rare earth magnets, so it might be a bit over engineered, but this is…
Layer Height: 0,2mm Infill: 20% Material: PLA
Tired of the cable chaos? We've got you covered! Introducing the Cable Wrapper, a sleek solution designed to keep your charging cables neat and tidy. Say goodbye to tangled wires and messy bag! How It Works Simply stick the Cable Wrapper…
Sewing tools organiser for my wife. Its drawer is designed to hold bobbins. Print instructions STL file contains multipart object. Separate parts in slicer. Print and glue together using CA glue. Assembly should be really easy. Drawer can…
5x2 Gridfinity compatible "The Handsome Cable Organiser" Holder x7 Mini The Handsome Cableorganizer by GiantBrain | Download free STL model | Printables.com Print details: Ender 3 S1 PRO PLA 15% Infill CHEP EXTRA FAST 0.28MM CURA SETTINGS
![Lipstick organiser [Organizér na rtěnky]](https://media.printables.com/media/prints/243042/images/2193376_9fbe0dee-2702-4981-b8d0-cc9fd1f6ea91/21_4.jpg)
