42 models
Kit card model of the two-seater ornithopter from Dune (2021). Can be printed in a single piece kit card or as separate pieces in different colours, at a different scale or to replace a piece that broke. Tested to work at 75% scale for…
38 cm length, 25cm wings, articulated 7$/month >>> PATREON
Hello fellow makers, I assembled the Lego model of the dune ornithopter as soon as it arrived, and realized quickly that it is too big to stand on top of my IKEA Kallax shelf with the landing gear down. Although a beautiful pose, I wanted…
Overview The core mechanism for an ornithopter's flapping motion! I've tried to modularize the mechanism so multiple can be driven (and offset if desired) from a single axel. v1.1 of the mechanism is complete and functional! I'm going to…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 This is an Ornithopter mechanism that I designed from scratch for the “Flying Things” contest on Makerworld, and is a fun little demonstration of a simple mechanism which flaps wings, and also moves the tips of the wings to…
A simple mount that I designed in OnShape that let's you hang your Lego Ornithopter to the wall by the landing gear. I printed mine in PETG CF, but I'm pretty sure PLA would hold it just fine. It secures the Ornithopter to the wall,…
I designed this Lego Ornithopter Wall Mount based on the discontinued Limited Series from Wicked Brick. I also made the Minifigure Plaque, so you can display them near your Ornithopter. The Design is modelled so ther are no screws…
20 cm size 7$ commercial license >>> PATREON
Please follow Kamteix's instruction for assembly.
“This plane can flap its wings and fly like a bird.” It requires some work, but you enjoy making it. ～Things to prepare other than 3D printer output products～ 3D printed parts ….1SE Plastic straw ….2EA (diameter 4mm, length 130mm) Plastic…
Simple remix to reduce amount of filament plus add a little rigidity. Rest of the parts can be found on the original model
Printing setting are the same as the original model. For the original model check out:- https://www.printables.com/model/791275-stand-for-dune-house-atreides-ornithopter-kit This version of the model is the kit version of the Stand for…
(Deutsche Beschreibung: siehe unten) I have tried to design a wind chime based on Leonardo da Vinci's flying machine, the Ornithoper . The wind chime should be as close as possible to the original sketch. I hope you like it! Printing…
Ornithopter Simplified Ornithopter Model by Leonardo Da Vinci Ornithopter with Chibi Leo Hi guys! I tried to create a simplified model of an ornithopter that can fly (glide). The wing should slide into the tail with a little force.…
I remixed the LEGO Ornithopter Stand from sherlocked (see below), as his version wasn't what I wanted. I found it unpleasent to glue the parts and also the ankle was to steep for me. So this will print in one piece and is more upright.…
Hello I post this machine that I have remixed I don't remember who but the size was not good, I tried and it works well, contact me for the fusion 360 files.
Česká verze Nástěnná 3D tištěná dekorace inspirovaná ornitoptérou ze světa DUNE. Vhodná do herního pokoje, pracovny nebo jako dárek pro fanouška sci-fi. English A 3D-printable wall decoration inspired by the ornithopter from the world of…
its an ornithopter spin gears for wings to flap
Wall mount for the popular Danish toymaker's 10327 Arteides Royal Ornithopter set. You will need 2-3 8 stud wide axle for the assembly. Please check my other model for straightening the wings when the copter is mounted on the wall:…
I just added LEGO studs to be able to install the minifigs on the base of the support
The Lego Dune Looks great on the wall, But it looks even better when it's hung at an angle. Unfortunately most wall mounts only allow straight up and down. This mount can support any angle (you could probably even mount to a go pro) and…
This little model can fix the 10327 Arteides Royal Ornithopter's wing when you mount it on the wall. I'd recommend to use my other design:) https://www.printables.com/model/1176134-lego-10327-arteides-royal-ornithopter-wall-mount
Use supports for everything some filing may be required so that the wings fit into their nooks
These models are the glass panels I created to fit in the holes in the canopy of the Dune Ornithopter by Kmech toys. I recommend that you print this in clear PLA, however it might also work in clear resin. please enjoy. Sorry about the…
This remix adds a snap-fit cockpit insert to the Dune Ornithopter Kit Card. Designed to print in translucent PETG, the part achieves a clean and durable fit without glue, using intentionally tight tolerances that account for PETG…
IKEA Skadis pegboard holder for the MENG 1/72 DUNE Ornithopter model. It is recommended to use ABS for printing.
3D Model Project Description Project Name: Vertical Flush Wall Mount for LEGO Icons Dune Atreides Royal Ornithopter 10327 . Overview This is a minimalist, space-saving, low-profile wall bracket designed specifically to safely display the…
Simple peg that replaces the loading ramp from the Ornithopter to display it on the HSW wall. Step 1: Remove loading ramp from model Step 2: Install mounting peg on HSW with one of the insert-empty.stl mounts Step 3: slide model onto the…
I remixed the LEGO Ornithopter Stand from sherlocked (see below), as his version wasn't what I wanted. I found it unpleasent to glue the parts and also the ankle was to steep for me. So this will print in one piece and is more upright.…
This Engine is For Making Home Made Ornithopter This is Made By the Mentor of PAI ICT Academy Azam Campus
I was inspired by Dune ornithopters if you can plese like these projects take a lot of time to make
I grew tired of the blades on my Lego Ornithopter sagging, so I designed this. It is a very easy print. Material: LayerWorks Pro PCTG Perimeters: 3 Infill: 15% Adaptive Cubic Supports: No
Changed some things from the original (which operated as it should) to better suit my situation All parts scaled down to 75% of original model .2res .4mm nozzle 10% infill for all except Gear Handle and Gear Drill Attach (100%) Supports…
Description Note; The pieces are small and contain details. Please use pla material. Bom List; Metal clips (2 piece) 450x160mm thin bag (bag file) 1,5x7 small screw (4 pieces) M1,5X5 small screw (1 pieces) Rubber band (5 pieces) How does…
I made jointlinks for 6mm rods to connect each other and between. Cause for this design is an Ornithopter-Project I'll probably never gonna finish. XD So if you just want to connect 6mm rods with 270° movement - this is your design. ^^…
Note; The pieces are small and contain details. Please use pla material. Bom List; Metal clips (1 piece) 450x160mm thin bag (bag file) 1,5x7 small screw (4 pieces) M1,5X5 small screw (1 pieces) Rubber band ((5 pieces) How does it work?…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) This is a simple, fast print of the…
An ornithopter with print in place (with support) wings. Try not to scale below 60%.
![Display Stand for LEGO 10327 Dune Atreides Royal Ornithopter [last update 7.04.2024]](https://media.printables.com/media/prints/745151/images/5835699_88f7d4bc-5d99-4605-b93d-4f0641a5fafc_cec54175-f345-4337-8d59-43c67c3bd57f/10327-1.jpg)
![Wall Hanger for LEGO 10327 Dune Atreides Royal Ornithopter [last update 06.04.2024]](https://media.printables.com/media/prints/825723/images/6403952_1c79d280-4c3f-4b7e-a9e0-9ea4864c27b5_99b5287b-496f-4165-b1cf-48c5516a504a/10327-wall-1.jpg)
