307 models
Made this to hold rolls of paper towel in my garage where I use the Proslat system for storage. Printed PETG 15% infill No supports about 13H for the pair.
Print approx. €14.36–€17.55 excl. taxPreliminary estimate for PETGSource material: PET
Honeycomb Storage Wall - Combination Square Holder - Lufkin ProSlide
Print approx. €0.63–€0.76 excl. taxPreliminary estimate for PETGSource material: PET
Aufbewahrungsbox für Nagelfräser "COSLUS" Diese habe ich von Amazon und da war leider keine Box dabei... Das Coslus Fräsergerät ist 150mm lang und hat 20,7mm im Durchmesser Ich habe die in die Grundbox einsteckbaren Aufnahmeringe mit…
Print approx. €11.30–€13.82 excl. taxPreliminary estimate for PETGSource material: PET
Tento model byl vyhotovený Markem Foukalem v rámci diplomové práce jako 3D dokumentace historické památky. Památník vytvořil významný akademický sochař František Bílek v roce 1923 ke 400. výročí narození přerovského rodáka Jana…
Print approx. €9.00–€11.00 excl. taxPreliminary estimate for one variant
I recently made a safe stand to place my Pulsar Puffco Peak Pro Hydroslide Recycler Top Glass on when not in use or storing it away. The way I designed it makes it fit nicely, and the base platform keeps it from tipping over. I think it’s…
Print approx. €1.07–€1.31 excl. taxPreliminary estimate for one variant
3D model uzavíratelné pilulky, s původním plánem použít jako KPZ. Každopádně využití je čistě na vás.
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Studenti vytvoří stavebnici, na které lze názorně demonstrovat chemické názvosloví a tvorbu binárních chemických sloučenin.
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for one variant
Simple credit card sized slate for white balance in underwater photography. Should obviously be printed in white saltwater resistant filament. I printed it in PETG as no ASA or similar at hand.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
Further details about project can be found here . Project 376 "Yaroslavets" (Ярославец) is a Soviet and Russian riverboat. It was designed in 1953 and since then was manufactured in huge quantities. A lot of these ships are still used by…
Between 1935 and 1938, the Czechoslovakian government had been building a line of border fortifications as a defense against Hitler's Germany. However, it was still far from finished in 1938, and in the end, it was never used because of…
Another remix of my "A-140Z atypical" bunker. This is the D type , a small variant, like one half of the larger A type, with just one gun and four crew members. There were two subvariants, D1 and D2, mirrored versions of each other, with…
Before you ask questions, check out the full build video here: https://youtube.com/live/ReVA2th-tIE?feature=share Background video also here: https://youtube.com/live/tSo7eklaDQA?feature=share Makerbeam Kit Required 20L SFFPC ATX…
A remix of my "A-140Z atypical" bunker. This is the A-160Z , in contrast with the previous model, this is a pretty standard specimen of the A-160 type (which was the most common of all types). --- Varianta mého předchozího modelu…
3d miniature of Oslo, capital of Norway! Check out my collection of other miniature cities: https://www.printables.com/@jarvizar/collections/1124416 Slicing & Printing Details This model was designed to be printed with a 0.4mm nozzle and…
So i lost an optical port plug for my soundbar and i was searching for a replacement, but there aren't a lot of models to print and none fit very well, probably due to being somewhat inaccurate. Then i found this actual connector on…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Updated 6/9/25 I've updated the lock so now it has a tab on the bottom to make “unlocking” the hook much easier. While looking around for more economical hooks to use with my newly purchased Proslat, I saw quite a few on both Amazon and…
This highly detailed 3D model captures the charm of a classic Yugoslav intercity bus, complete with realistic body lines, windows, mirrors, windshield wipers, and an undercarriage with drivetrain details. Perfect for collectors, diorama…
The original files, including KiCad support files, can be found in the github repo, at github.com/jbm9/toslink_launcher . TOSLink is a really handy fiber optic cable: you can buy them easily, reasonably cheaply, and in various lengths.…
These are supposed to be in mm, not cm. Scale to 10% if needed. 09/APR/2022: Thickened and remixed BLTouch mount so the wires are on the inside, added screw holes for the 4020 fan This is an amalgamation, fix, and re-modeling of: The…
in 100% scale with 5% infill print time something about 2h with 36g weight, 12m of filament. Print Settings Printer Brand: Resolution: 200 Infill: 5-10 Filament: prusa PLA Custom Section Category: Buildings & Structures
The Historical Chess Set Series #9 - Czechoslovakian Coffee House Chess Set Chess has been played for centuries and has evolved, with different countries and cultures contributing to its development. The Czechoslovakian coffee house style…
Print out the three holders. I use a 1" x 48" wooden dowel like this one: https://www.homedepot.com/p/1-in-x-48-in-Raw-Wood-Round-Dowel-HDDH148/203360196 one 4 foot dowel can hold over 30 lbs of filament! built specifically for 1kg…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
TOSLink is an old optical connection used for sending digital audio between consumer equipment. This data is typically sent over HDMI with the video nowadays. This is a dust cover that fits unused sockets on the equipment.
Smaller than commercial mounts for compactness but still big enough that the dial/body doesn't extend over the edges. The legs extend only to the edge of the lock body to make it easier to pack multiple against each other. Uses standard…
Model has independent front wheels arms, motor 130, traction magnets, fron wheel with 2 mm ball bearings, Body fixing via pins. Rear tires should be slotit PT06.
Crosley Tower is the world's second-largest single-pour concrete structure (after the Hoover Dam). Built for the University of Cincinnati, it was completed in 1969 and is a prime example of the Brutalist architectural style. I made this…
Doporučená rychlost tisku 50 % – Tato pomalejší rychlost pomáhá zajistit čisté detaily a optimální kvalitu díky četným podpěrám stromů nebo mužete 100% ale záleži na tiskarně. Orientace tisk muže na stojaka. Výška vrstvy doporučuji 0.08…
Figurka pro nejen modelovou železnici. Inspirováno radou Vacátkem ze slavného československého seriálu.
This is a terrain map of the first Czechoslovak Republic the original model was created by DerSchweizermake
This 3D model was created with the help of AI 🤖. The model was split so it can be printed without the need for a large amount of supports. It is segmented into the body, arms, hands, and head. The body includes the chest, legs, and shoes…
A figurine of the Pokemon Froslass. Category: Sculptures
Should be compatible with any Crosley Cruiser portable model. Printed in PLA with 0.1mm layer height, 2 perimeters, supports everywhere.
Hallo Freunde, ich biete euch hier eine Vase zum Download an. Abmessungen: Höhe: 150 mm Durchmesser: 70 mm
Website about this thing: http://csopevneni.xf.cz/Vybava/Rozsochace/Kotrmelce.htm Steel tank obstacle in 1/16 scale. Need to use supports for proper print. Original format ones shoulder is 1800mm.
A headphone holder made specifically for the Proslat PVC Slatwall . Should hold most regular headphones or noise protection earmuffs. Simple slide-in system makes it easy to re-position. Prints without supports.
a Monster for Tabletop. Category: 3D Printing
Soap box by Jaroslav Troščák This soap box is great for traveling. Printed with black pla on Ender 3 s1 pro If you like my design, please consider supporting my school by clicking on this link. As a passionate teen designer who loves…
Why? The Exoslide kit for the Ender 5 Plus is a nice upgrade from the stock v-slot wheels if you can't afford linear rails. However - the mounting brackets and design, while being better than stock, still leave something to be desired…
Hey there! This is my design for a chessboard that I created using Fusion 360. The dimensions are 34x34 cm, but you can also print it in the original size I designed, which is 40x40 cm. I drew inspiration from the talented @Durez Johnny's…
Unsatisfied with the limitations and individual costs of Proslat mounting hooks, I reverse-engineered the EGO battery to create a secure, seamless holder designed specifically for Proslat walls. Two variants are provided: Single-body…
Orthodox russian cross
BL-Touch/CR-Touch mounting brackets for the Micro Swiss NG Extruder and NG Revo Extruder installed on an ExoSlide motion
Update 27-8-2025: Minor ease of assembly improvements and longevity Update 19-7-2025: Added embedded nuts to part Housing for blaster longevity, for those who downloaded this before this date, redownload files named R1.1 It's 90% made out…
Cedulka Československé státní dráhy ČSD
An AMS slatwall mount specifically for the Proslat PVC Slatwall , also available on Amazon . These brackets are 20mm thick and have four locking pegs on each side to secure the AMS on the mount. You can see from the pictures that I also…
This is a knob for a vintage Crosley radio. This knob is the type that pushes into a spline. I designed the spline based on the chart from the site below. I did upsize the spline, as I found the older potentiometers fit pretty tight.…
Hi, This is my design of Creality filament spool. If you like my design, please consider supporting my school by clicking on this link. As a passionate teen designer who loves creating and making models, your support would mean the world…
This is a 3kg or 1kg spool holder designed specifically for the Proslat PVC slatwall system and holds the filament sideways to provide a straight path into the rear Y-port on the Bambu Carbon X1 printer. Just 4 parts to print, the main…
Unsatisfied with the limitation of proslat mounting hooks and individuals costs, I developed a "drop in" nut that allows you to mount universally anything to it. This fit and design has been verified on Proslat "PVC Slatwall" product…
Air Duct made for Exoslide Extruder with Revo Hotend and 4020 Fan https://www.exoslide.com/products/hardware/extruder-exoslide
This is a holder for your iPhone that slides into the Proslat slatwall. It has been designed with the regular sized iPhone 15 in mind, with a fairly thick case (I use QuadLock). Has to be printed with supports.
Držák na příposlech RX8 / Holder for Flacarp RX8
Exoslide hotend mount designed for the ender 5 and 5+ Print setting: 4 layer walls 4 layer bottum+top 15% infill Bltouch offset: x : -30 y : -3 Heat inserts : M3…
Re-design for the stealthburner to fit direct on de exoslide. bltouch offset: x_offset: -39 y_offset: -3 print it in voron spec if you like my work https://paypal.me/sanderelsinga at your own risk not to recover damage from me!
This is a knob that I made in fusion 360 to replace one missing from my father's Crosley CR-9 Select-o-matic (an AM/FM/Cassette player styled to look like those mid twentieth century tabletop jukeboxes that you'll see at Johnny Rockets…
This covered water bowl is intended for goslings or similar water foul who need to be able to stick their head into the water to drink, while preventing them from turning it into a poultry wading pool. Category: Pets
Ideal for holding skim wakesurf. Need to be printed in pair.
Hi, this is my design for a USB, SD, and MicroSD holder. Inspired by: Lalo_Solo - https://www.thingiverse.com/thing:2637487 If you like my design, please consider supporting my school by clicking on this link. As a passionate teen…
Just a simply organizer for the Coslus water pik on amazon for its attachments and cable. Includes a lid that just sits on the base piece. Layer height: 0.2mm Temp: 215C No supports
Unsatisfied with the limitations and individual costs of Proslat mounting hooks, I reverse-engineered the Dewalt battery to create a secure, seamless holder designed specifically for Proslat walls. I recommend printing in PETG, with 3…
Vytvořeno pomocí programu Hueforge, skvělý program pro tisk barevných obrázků i bez multimaterialu jako AMS nebo MMU. Důležité je zvolit vhodné barvy filamentu. Pracuje s propustnosti barevných vrstev, takže je schopen vytvořit i odstíny…
Hi, This is my design for a jump rope. It features two skateboard bearings, one at the top and one at the bottom. For better texture, I applied a 0.2mm fuzzy skin. The rope is 5mm x 3m PVC from AliExpress and comes with black stoppers.…
Czechoslovak First Republic soldier by AI
REQUIRES USE OF UNIVERSAL PROSLAT MOUNTING PANEL NUT - REVIEW INFORMATION BELOW. Instructions (Multi- accessory Mount): Install the universal single and double mounting panel nut into the desired slot of the slatwall Mount the holder to…
" https://www.youtube.com/shorts/EOAYBatY_Bg "
Customizable IKEA SKADIS Bit Holder with Labels A fully parametric bit holder designed for IKEA SKADIS pegboard systems. Keep your screwdriver bits organized with clear, customizable labels for each bit type. ✨ Features SKADIS Compatible…
Designed this specifically for storing the vacuum head-up so the attachment can stay on.
I recently used a Mosley CL-33-M yagi antenna that works on the 10m 15m and 20m bands. The antenna is used and is missing some of the antenna pole spacers. So I designed and printed a replica in tinkercad. I think it matches fairly well…
doslock med anslutning Category: Household Supplies
Sprite Extruder bracket for exoslide
This 3D printed replica is based on the classic Czech black rubber training grenade , widely used in schools, sports clubs, and military training during the 70s–90s. It allowed safe practice of throwing and handling without risk of…
The keystones for purchase all had bad reviews as they are made of multiple pieces and fall apart. This one fits into my wall plate just right.
Hi, This is my design for towel hooks. Screws: Use wood screws for mounting. Pin Hole: Below the screw hole, there is a 2mm diameter hole for a shelf pin (as shown in the third photo) to prevent the hook from moving. Drill a hole for the…
Modelled and printed this Exoslide Wire guide for my Ender 5 + with a Hemera Hotend kit. The Exoslide is great upgrade for any 3D printer, but without proper wire management, the lose cables catch on the belt and can times cause the…
A free STL of Comissar Yaroslav for your Trench Guard We are running a Patreon where you can collect an entire Grim Troops Welcome Pack -- https://www.patreon.com/HappyBoarMiniatures Supported files included
This is a remix of the toolson mk2 Y idler mount, fits now gt2 16th with 3mm bore. Print instructions Category: 3D Printer Parts
Designed to hold items with a euroslot tab. A 5° upward tilt was added and helps prevent items from sliding forward when placed — this works very effectively. A non-tilted version is also included, though it's not recommended. For added…
Step into the neon-soaked future with this incredible 3D printable STL model that captures every detail of the iconic replicant hunter. This masterfully crafted figurine showcases the character in his signature long coat, holding his…
Tento model som nevytvoril ja - je volne dostupny na prilozenom linku.
Created two versions - large and small The smaller version is for 29-54mm rockets. The larger is for 75mm + . The larger one is beefier in every dimension. To keep the plastic from marring the rockets, the mounts were designed to take a…
A slightly sturdier version of the Toslink S/PDIF Optical Port Plug/Cap by Dnate The original broke instantly when taking it out of the port, so I added a fillet to improve printability and strength.
Created to hook up some cable chains for my Ender 3 Pro that has all of the ExoSlide kits on it.
This was used on an Ender 5 Plus with full exoslide kit. This will let you keep as much X bed space as possible with a side mounted fan.
Ryan Goshling is the BEST!!! I love the film he's in Fall Guy
National emblem of Czechoslovakia
STL maps of the Czech Republic and Slovakia and prepared for magnet assisted interlocking in .3mf format
Check out my accessory mounting too!
How to construct an egg cup and design it in a CAD you can see on https://www.nerd-corner.com/solidworks-tutorial-egg-cup-with-solidworks-revolved-boss-base-and-fillet-feature/
Edit 4.28.2020: I updated the part cooling fan duct, this moves the duct further away from the hotend, so it doesn't melt, gets it out of the way fo the wires, and also seems to improve the flow. If I say so myself, it also looks a heck…
Hi, I created this slider, which is weaker than the original one.
First attempt making a non-standard vase shape
Wanted to play around with Core-XY but didn't want to commit to linear rails and EVA because I'm a cheapskate and my printer already had Exoslides. Biggest change was moving a couple of the 3mm bolts over to line up with the Exoslides and…
This bracket is designed to hold the EGO Model CH5500 Rapid Charger to the proslat walls using an extension from an existing design I've created. You will need to download Qty 2 of the "single (standard)" version of my universal mounting…
Koslov from zootopia figure: Version information / Files information STEP file: NO STL file: YES MONO version: YES AMS/COMBO version: YES MULTIPART version: NO Basic information of print: Printing material: PLA Support: YES (tree)…
Hi, Here is my design for a shelf brace. The brace arm is 12 cm long, and the holes are 5.5 mm in diameter. Feel free to adjust the dimensions and hole sizes to suit your needs. Printed with black pla on Ender 3 s1 pro If you like my…
100 rounds of to spec 28 Nosler (according to my CAD)
![M2723 ExoSlide [Micro Swiss NG Extruder] - Probe Brackets](https://media.printables.com/media/prints/707266/images/5548494_f4f0cf07-4171-4b77-b3d2-a0da6692225e_b5861331-8556-44ab-9deb-b9b54d37ec8c/image1.jpg)
