Counting matching models…
The original injection molded handle for the MacAllistar MLMP1600 Lawnmower is far too flimsy and is prone to splitting near its pivot point. (See image of blue handle) It was impossible to find a spare online so I decided to model it…
Made to fit the Thinkpad P16s Gen 2 and the lenovo thunderbolt 4 dock. Should fit the previous dock and also the very common Thinkpad P14S Gen 1,2,3,4. Print instructions: 15% infill No supports needed Can be printed in pretty much any…
I needed a case to assemble my Raspberry Pi 4 with the cooling solution from GeekWorm (P165-A) and a DSI screen from Osoyoo (3.53). The designed is composed by 2 part that are assemble together with 4 M3x20 screws. Instead of using the…
My Sony Alpha 6000 came supplied with a SELP1650 lens but without a lens hood. The lens hood I designed can be placed over the extended objective (when the camera is switched on) and still allows the use of filters, e.g. a polarizing…
I created this laptop stand for my Lenovo ThinkPad P16v Gen 2. It should hold other laptops as well, provided they are not higher than 26 mm.
You will find different versions in different heights. I have only printed the 6U versions. If you have wishes for other versions, write me a PM or a comment.
This is a case for a raspberry pi 4b + the Geekworm heatsink/fan without the screen or the pi cam mount per the original model. I also included a remix of Malolo's vertical stand to fit this slightly wider case. RPI_4_Case_B is the remix.…
Laptop riser for better airflow for Asus ProArt P16 (H7606) with clearance for charging and USB-C port. Pieces stack together for storage/transport. Created this model based on others to better fit the laptop and lock into place against…
This is a half size container for the Norp16 assortment box. Also branded as Norb16 and Nors16 which is an assortment box for small parts. The boxes that come with it are nice but are still too big for very small screws or for parts you…
2x3 divider for Konger SP16 organizer/cabinet drawers Print instructions Inner drawer dimensions: 50x35x67mm Where to buy: https://szufladki.com https://www.tme.eu/sk/en/details/szuflpl16/drawers-and-sets/konger/p16/…
Modified from original (https://www.thingiverse.com/thing:5716680)
These inserts can be inserted at the top of the original insert bins, giving you a second layer of storage. They fit the NORP16 parts bin storage boxes from Prosperplast. If you want to modify them you can edit the model at OnShape .
This part is designed to mount a Holosun AP16 507K/407K reflex sight (or any sight using a modified shield mount) to an Ataman AP16 pellet gun. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.15…
The original depth stop which came with this drill press was flimsy and broke on first use. I found a depth stop on thingiverse but with slightly different dimensions. I decided to build one from scratch using design inspiration from the…
Replacement for the wheels that hold the rail for the middle basket. I printed them in ASA so they can handle the temperatures in the dischwascher.
These IP68 waterproof SP16 cable connector plug & socket sets usually come with a cap for the socket, but no cap for the plug. Whenever I unplug my things, I want to protect the pins in the plug, so I decided to design a cap. The cap has…
Best printed with Snug Support Auto in upright direction. Sides act as spring clips, might get different performance in different materials. Print shown is with PETG-CF. Works perfect.
Caja porta baterías para el Frontal HP16R de la marca Fénix. Batería de litio ARB-LP 3000. Diseñado a partir del modelo “Parametric hinges small parts box” by Billiam y adaptado para tornillos M3 x 25 mm.
In order to have my monitor hanging on the Skadis board under the angle that's comfortable for me to look at it at I have quickly created this mount so it holds the monitor very very tight, and at the same time is firmly attached to the…
Ein Akkuplatte für Turnigy Nano Tech 3S 450mAh, Tattu R-Line 450mAh oder 650mAh oder ähnliche Ich werde wohl noch eine Antirutschmatte oder Klettband mit Sekundenkleber aufkleben! Viel Spaß damit! A battery plate for Turnigy Nano Tech 3S…
I just needed to mount that small portable monitor to Skadis board so I designed that mount with a specific distance from the Skadis board the monitor is attached to. Not necessarily would fit your needs so please adjust to your taste if…
The first time I turned my ViewSonic VP16-OLED to vertical orientation, I almost dropped it because the only thing holding it up is the one slim corner of the stand. So I made a stabilizer for it which also works to bring the viewing…
It needs 3xM3.5 countersink screws to mount.
Fits this charger (may fit others, due to port placement): https://www.amazon.com/dp/B0CXNW796S Use small wood/metal screws to attach the “lid” to the surface, use a drop of super glue on each side to secure the two parts together (AFTER…
This plate bolts to the back of a Behringer P16-HQ , using the same 3-hole pattern as the P16-M and Behringer's P16-MB bracket. On the other side is a solid 23 mm stub post that fits a Roland-style drum module clamp , so the P16 sits on…
Underneath mounting LP-16 socket case. Initialy designed for a M3x20 screws.
My Sony Alpha 6000 came supplied with a SELP1650 lens but without a lens hood. The lens hood I designed can be placed over the extended objective (when the camera is switched on) and still allows the use of filters, e.g. a polarizing…
A simple stand for the Lenovo Thinkpad P16S that integrates the Lenovo USB-C Dock (40AS) This print consists of 2 pieces, a top and bottom. The top is designed to slot into the bottom piece and with glue, it will hold beautifully. If the…
Print 2 and slide onto each end of the hinge side of your laptop. I printed mine in Atomic PETG-CF.
Printed with 0.25 Layer high @highspeed on my Prusa Core One without support. Maybe you need support for the grid.
Cover to prevent dust and dirt getting into the fill port. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Prusa PETG Galaxy Black Category: Sport & Outdoors
![WOODWERD Anker 200W GaN [HX-P16] Mount](https://media.printables.com/media/prints/1147979/images/8665702_a8c10981-5dcb-4acb-8a3f-7a6345d911ab_5859d0ee-8d2a-4e69-877d-eb72f9e63193/anker200wgan_asm-v3.png)
