Counting matching models…
Use 0.08-0.20mm layer height, with 2 walls, 15% infill (typical settings). Print the main mask body in a black filament to reduce reflections (though in prototyping, my green mask worked fine too). Use the multi-filament versions only if…
Drop in Corner Mount for Aqara FP300 Hex cutouts in the back reduce resin required by ~20%
Uses the Gridfinity storage solution to hold the Brother P-touch cube label printer. Allows the printer to print while still in the box (using battery as the power port is covered). A nice height to fit into the bottom drawers of an Ikea…
Simple mounts for the Aqara FP300. I’ve included STEP files so you can easily modify them. Stand: Simple stand for flat surfaces. Clip: A clip with a 4.85mm gap which fits my cabinet door. You will likely need to adjust the STEP file to…
EN (en Français plus bas) You'll need two or four 20x10x5 mm magnets, depending on the desired magnetic strength. And for those who don't know where to buy them, I can only recommend https://www.123-magnet.com/cat-aimant-n-odyme-303.htm .…
one of the original hooks broke and the original spacers came off, which were only glued I copied the shape of the original hook, modifying it to lengthen it with a rubber part screwed instead of glued the original hooks incorporate a…
The holder for the label printer is designed for use with the Multiconnect System by @DavidD for Multiboard. The holder allows you to create labels without removing the printer. It also features a cutout on one side for the charging…
A compact grip and arca-type tripod plate for the Nikon p300 series. This adds a Ricoh GR - inspired grip, a bottom right strap connector, and arca type tripod mounting plate to the camera. Pictured here in neon green translucent…
A Gridfinity slot for Brother P-Touch Cube Label Printer
Simple color ring for a MTP3000 Series radio (for example MTP3550 in the picture). The ring is exactly 0.8mm thick for a 0.4mm nozzle. It can be used single-color or multi-color based on your personal preference :) PLA works fine, but a…
Mounts to attach the LDO LCP300-24D5 Power supply to a DIN Rail, in either an aligned (82mm hole spacing) or 90 degree (115mm hole spacing) orientation. Uses 4x 5mm M3 standard Voron heat-set inserts This is a remix of the Voron design…
Original Thingiverse model with pre-defined hex cutouts modified as follows: front region made solid with modifier thinned to 2mm with modifier set to no top/bottom infill with modifier infill set to grid @50% using modifier (honeycomb@…
It's the freeze drain outlet of a LX LP300 spa pump whith the “M” mark for the old model which is nowhere to get. It won't get produced anymore and i managed to brake my original. So i measured the orginial and tried to recreate it. Even…
Aruba Networking AP200, AP300 wall/ceiling mounting kit. This is for mounting these APs to a wall or ceiling (including angled ceilings). It uses a two (2) part mount to allow for the fitting of the mount base without having to hold onto…
I needed a mount for the Aqara FP300 Presence Sensor. I didn't like the existing ones out there; some are drop-in mounts, but since the base of the sensor has two magnets, I wanted to use them. This corner mount requires two magnets with…
DISPONIBILIZANDO ESSE ARQUIVO DEPOIS DE TESTAR VARIAS VEZES, MEDIDAS EXATAS PARA O MODELO CP300 ARTEMIS. QUALQUER DUVIDA PODE ME CHAMAR QUE AJUDO.
I lost 2 of my 5 support, so I designed this replacement. Use TPU
The late 1960s/early 1970's Fujica P300 Single-8 cine film camera has a fully automatic exposure system that relies on a light dependent resistor (LDR). It has no manual override, which was a problem for the one I have that had a failed…
Drive tray for IBM EXP3000 jbod based on P/N:42R4129 Printed on PLA and tested on EXP3200
Fits the Opentrons OT-2 P300M Gen2, 8-channel pipette. Replacement for the carriage - the part that drives the plungers and tip ejector. Requires no additional hardware. Print Settings Tested using a 0.4 mm nozzle at 0.2 mm layer height.…
Secured with fan screws.
I made this part to replace the whole black plastic carriage in the pipette. I only modeled the left-most mounting screw holes. Those holes were used in the P300 Gen 2 pipette. This is the matching steel rod you'll need to build a…
This is a mount that utilises the channel in the 2020 extrusion on the Z Axis of your CNC router to mount a BPV3000 air assist/mister. May fit other models of air assist. Using the awesome 3D model from Matt Davey made this SIGNIFICANTLY…
This is a simple push-on protective lens cap and push-on lens hood for the Fujica P300 Single-8 cine camera from the early 1970s. Printed in ABS at 0.2mm layer height on a Prusa MK4, though PLA or PETG should work fine. I painted the…
The HP P3005 LaserJet printer is an old workhorse. However, after many pages it may become necessary to replace the fuser drive gears, about a $15 fix. One of the gears is retained by a little clip HP calls the "thrust stopper." The gear…
Replacement for original Fujifilm Froniter SP3000 lightbox. When you want place film info film mask, and light box is missing or not working it's hard to align film to film mask. Frame is designed by me BOM: rocker switch - i used…
Wall Mount Bracket For A fsp230-aaan3 PSU that shipped with a Tiertime up 300. 2 need to be printed to mount the PSU sideways although you might only need to print one to hold it vertically. The screw holes were designed for 4x20mm…
Mounting bracket to put the LDO LCP300-24D5 PSU on the back of Rolohaun's Rook MK2 DIY 3d printer. I took design concepts from Kanrog's litany of existing mounts. I did use heat sets on this because of the weight of the PSU. Items needed:…
Kryt tlačítka prodlužovacího kabelu TAPO P300, které stíní jeho světelný smog
We needed a toilet cistern spare parts for a Geberit UP100. You can only buy the whole valve and not the little lever from it. I printed it with PETG-CF in 0.2mm layerheight. Have fun with it!
Customized back panel to a a BTT SKR3EZ and LDO LCP300-24D5 PSU on the back of Rolohaun's Rook MK2 DIY 3d printer. The original panel is designed to have mounting brackets hot glued on but after making brackets for these devices I was…
Drop in Corner Mount for Aqara FP300 Hex cutouts in the back reduce resin required by ~20%
A Gridfinity slot for Brother P-Touch Cube Label Printer
40%infill perimeters 4 top 5 and bottom 5 4 M3 HEAT SET INSERT AND 4 M3X6 SOCKET HEAD CAP SCREW
An adapter to replace the button cell battery with a regular AAA
staresso SP300 industrial stand enjoy your coffee Setting infill 20 % PLA/PETG Hardware M3 Theaded insert 12X M3x10 Screw 8X M3x15 Screw 4X
I got fed up with my Nexus 4 phone sliding out of position on its WCP300 wireless charger, so I decided to build something to keep them together. I didn't want something to hold the phone at an angle, as I never use it in that way; it's…
