Counting matching models…
Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…
Snowpeak SP500 / Diana P-Five shoulder stock inspired from crosman 2250 ratcatcher butt stock. Model cut to fit the Prusa MINI I Printed it using PLA with 20% honeycomb infill I used CA glue to join part exept “Left front” wich is bolted…
Drywall/ceiling mount for Aruba AP500 series WiFi Access Points Aruba's AP500 series do not come with any mounting hardware, this simple mount allows you to screw-mount this style of AP to a wall or ceiling or other solid surface. This…
I needed a mask to scan half-frame film and as these items are getting more and more expensive and rare, I decided to design one myself. The design was based on the original mask 135. The window in the mask is exactly the nominal size of…
I had downloaded the long throttle plate for the P1000 pedals from this post here: https://makerworld.com/en/models/456344#profileId-364175 and I wanted to make a brake pedal that matched. I have the Simagic P500 pedals, and the mounting…
Look ma, no overhangs! I love the original model, but it was missing a few design elements which make printing a lot easier - so here's my take! All STL files require no supports, and are pre-orientateded. Highly recommend turning on…
need any 18mm screw x 3 i use socket head
This is a printable, customizable insert for the PSU cutout on Phanteks cases. I made this file because my SuperFlower PSU has a data sheet on the side facing out when installed fan-down, which isn't very good looking. I modeled this case…
Washers for Simagic P500 with P-ORP(H) springs.
Distanzstück um die Pressluftkartusche vor dem rumwabbeln zu schützen wenn die nicht verbunden ist Spacer to protect the compressed air cartridge from wobbling when it is not connected
Pedal mount designed for the Simagic P500 and Playseat challenge . Although this was designed for the P500, it is generic enough that it can fit most pedals with at least two mounting holes. For the P500 you should probably print 4 sets.…
Just an easy to print model with snap fits for the usb and psu module.
This LG screen has a very thin frame, and so the webcam covers the top of the screen. This model matches the curvature of the back of the monitor, and the size of the webcam mount. No disassembling of the webcam is required, it can just…
Scatt optical holder for Walther GSP 500. Fusion360 design file included.
This model simply makes the OG body printable in place, and adds ventilation holes. Click HERE to download the new model, which features a completely re-designed leg system, adds features and fixes issues + is now is completely print in…
I designed this little power supply case for my DSP5005 in style of a mini laboratory power supply. It works really nice with an old notebook power supply. If you need more space you can print the extension too. Both, the body and the…
Simple but effective fan duct. It can be mounted to a 140mm fan in the front of the case. Print settings: 2 walls 10% infill no supports ---------------------------------------------------- Einfacher, aber effektiver Luftkanal. Er kann…
Custom covers for the rear ITX motherboard plate. -Included a blank plate so that you can design your own. 1/3/2021- Fixed Seasonic plate Print Settings Printer: Ender 3-v2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament:…
Mount your air cylinder with this spacer so it doesn't rattle around.
Modified cover to fit 92mm fan
Simple bracket with an internal swept groove to route cable tie through. The groove is sized to support a ¼" wide cable tie. Print with the mounting feet of the base on the bed of the printer.
Front and rear stands for P500A Desktop Case. Raise off floor/carpet to allow more air to PSU etc. 30% at least infil 0.3mm res
The smaller part replaces the internal battery and maintains the original internal circuit by pressing the contacts on the Camera. The original wires internal to the original battery pack are stripped and replaced with longer wires that…
Update as of 19.6.2018!! This is a universal mount to attach the WLANThermo Family of BBQ-Thermometers to the leg of a Weber 57cm BBQ-Kettle or the handle of a 1.25" Gas-Grill like eg. Napoleon Prestige 500. Configure both parts according…
A compact adapter for mounting a Mantis X training system to the compressed-air cylinder of the Walther LP500. It provides a stable mounting position for dry-fire practice and shooting analysis without modifying the pistol.
Per a request on Reddit's r/3DModeling sub, I created this to be a 1:1 replacement for the lid roller on the above model thermal printer.
Add a short 3mm bolt to stop it from sliding back and forth.
The outer cut-out of the cap is meant to let the light of the volume-indicator stay visible. The central cutout is required for the remote's IR-receiver to stay uncovered. The print can be done with minimal support (see sliced…
After a quick search, I couldn't find anything that fit this power supply so I made my own. This is a quick and easy mounting bracket that attaches to some DIN Mounts I printed from this model since I'm using a Manta M5P in my build. They…
Its just a simple holder for the Remote of (Heidenfeld HP500) and a few other heating panels that use the same remote.
Simple grill cover to hide the basement hole above the hard drives of my pc case, but to also allow air circulation. Made 2 little stands to add 6x3mm magnets then glued them to the grill for a seamless fit. I used 20% infill with white…
Sua Bomba Periferica BP500 quebrou as tampas? Pois aqui estão as novas trampas de proteção com modelinhos diferentes e arrojados ;D RECOMENDAÇÃO: Imprima com ABS ou PETG En (google translate): Did your BP500 peripheral pump's covers…
Scatt optical holder for Walther GSP 500. Fusion360 design file included.
Just an easy to print model with snap fits for the usb and psu module.
I needed a mask to scan half-frame film and as these items are getting more and more expensive and rare, I decided to design one myself. The design was based on the original mask 135. The window in the mask is exactly the nominal size of…
PP5000 Flashlight button Cover There are two files and I can't remember the difference between them
A remix for a 80mm fan for a clean look The holes used for mounting are 3.9mm for small M3 heatset inserts drill to size for large ones -Needs 8 fan screws to complete -Removed buck converter -Added fan surround I used a fixed stepdown…
