Counting matching models…
Double Stack Mag Pouch for left hand loading. This is designed to work with ELS and now also Tek-Lok mounting systems. If you have a gun that I don't have a pouch for just measure the magazine with your calipers (LxW in 3 different spots)…
reuploaded because the other link broke.
I designed this conversion adapter to mount a 120mm fan I had on hand because I didn't like the appearance of the stock fan included with the AXP90-X47. Required other than printed parts: 4x M3x5x4mm heat-set Inserts 4x M3 screws,…
The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…
I designed this model to squeeze a bit more performance out of the Thermalright AXP90-x47 CPU cooler in the FormD T1 v2 case. The duct prevents re-circulation and ingestion of hot air into the cooler and can provide some passive cooling…
Comes with detailed assembly instructions and is easy to print. Have fun! Juri
Helps to prevent hot air from recirculating into the CPU cooler fan. The internal chamber of my case get very hot, even with a 120mm exhaust fan installed. On my Terra, it reduces CPU temperatures by upwards of 13C. Before installing this…
An adapter to mount common 14mmCCW parts to an airsoft MP9. Tested to fit on KWA.
The purpose of a Dogear Shim is to help raise the pickup to its ideal height. Since Dogears are Fixed-height pickups, this is the only way to get around it. Model dimensions for x and y axis are set, you need to adjust the z size to suit…
I contacted the Maker of the Model STP9000 and asked to edit it for SC2020. Thanks for your permission chilluniverse@chilluniverse ! Remix for Holder Sepura SC2020 with Speaker. Happy printing! #STP9000 #STP9038 #SC2020
P90 and FS2000 parts Printing: All parts should be printed solid. PLA will not work for anything other than the selector switch. Nylon is the recommended material. You need to use a strong impact resistant material. Stay away from carbon…
Mag works and holosight slides on. Made for Lego figures or other figures with small enough clip hands. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 200 Infill: 50 Filament: PolyMaker PETG/PLA/ABS Literally anything…
Two different holders or mounts, for my Canik TP9SA. One is designed to sit on a shelf and hold the pistol at the ready to grab it. The other is a wall mount to hold it vertically. I have a small safe and wanted to utilize as much of it…
Removed text and arrow from original ( https://www.thingiverse.com/thing:2773868 )
Remxed to fit a UMAREX VP9 airsoft gun.
This is a printable version of the standard AP900/ Air Venturi Alpha forend/ fore grip. The M Lok is functional and the location for the standard magnet to secure the folded stock is included. Additional reinforcement is included that…
This is a printable version of the standard cheek riser to fit the Snowpeak AP900/ Air Venturi Alpha PCP. The factory hardware is used, so just print in your favourite filament and change up the appearance of your PCP! The model is…
I recently bought a second hand Canon Selphy CP900 Photo printer, but it came without a paper cassette. Looking on Ebay revealed that if I could find one it would cost more than i paid for the printer! I couldn't find one on Thingiverse ,…
Pixel 9 Pro Fold dash mount (car mount). Holds phone in landscape orientation, folded or unfolded, and either buttons up or down. By default, fits Bulletpoint Mounting Solutions' Rubigrid or any other mount which supports 20mm ball…
BB-MP9 MINI: The BB-MP9 is a prop gun for cosplay or display purposes. Heavily inspired by the Brugger & Thomet MP9 submachine gun, but with some obvious differences. This was just a quick model I made for fun, while working on a more…
This is an adapter to attach Streamlight SLR-8 laser sight to a WALTHER P99 AS .40 *** IMPORTANT FOR RESISTANCE*** Print Vertical with front against the printer bed. 100% INFILL Print as a whole , the piece snaps in. Place one rail and…
P90 upper receiver. Uses all original parts and works like the factory receiver. Main difference is plastic vs metal weight. I printed it in PLA and works just fine. Survived 3 games already and there are no signs of degradation. If you…
Printable pickup cover for a Fender "Soapbar" pickup, essentially a P90 pickup like Gibson would make. Modeled from scratch however I used the linked adapter as a sanity check that everything should be in the right place. Depending on…
Walther Mod. P99 cal. 9mm P.A.K ; 312.02.00 ; PTB 637 Backstrap replacement. Printed it in PLA, 0.1mm layer, 15% organic support. For perfectly smooth look, slightly grinding needed. As I actually printed it in white PLA, I airbrushed it…
Liteweight remixed version with zero gap between radiator and fan body, 25mm fans support in 3 slot mode, precise strong mount, support Corsair Venegance memory sticks and similar height even with shift brackets for AM5
Airsoft ARP9-stock offset with passthrough for your battery/mosfet cabeling. The offset allows you to mount your ARP9 buttstock 22mm lower than stock, making for a more ergonomic and comfortable placement for some.
Please like the model if you download it. It helps. Thanks! Porsche 911 Radio Controlled There are over 100 files to print. They are all included in the zip file. Dimensions: 62 cm (24.5 po) long, 27 cm (11 po) wide Features: Doors, hood…
This is a QD holster for an airsoft MP9, it uses a 3 point mount. It works by using the barrel tip and trigger guard to lock in place, thus it is not possible to use a barrel or side rail attachment. Both the A1 and A3 versions work.…
Works well. Print in black to hide the oils/carbon. The actual pictures are from an older design, the logo was changed to make it print better. The step file does not have the “Canik” filler, only the recessed areas. The 3mf file will…
Double mag pouch for Canik TP9 SFX pistols designed to use Safariland ELS mount. I believe this will fit all TP9 Magazines There is O-Rings between the plastic to hold tension on the retention screws. Hardware needed (2) M5x20 screws (2)…
I started trying to use the “Walther PDP Compact Magwell-Compatible Baseplates” , but was unhappy with the retention. It felt like the base plate could come off accidentally. I haven't retained any dimensions or design features from that…
Printer: FDM Material: PLA Layerhight: 0,3 Infill: 10% Walls: 3 Support: non Standard parts: DIN 934 - M4 - nuts 3x DIN EN ISO 4762 - M4 - screw 3x Fits for TM P90 midcap mags. May you have to scale the model for other brands.
A custom extended skeletonized stock for Airsoft P90s! This is a work in progress. Feel free to download and edit the Fusion 360 file (if you don't mind getting a look at the jank behind the scenes lol). The P90 reference body there is…
Introduction I like to keep everything in my gun safe tidy and make use of the otherwise unused wall space. Since the safe is lined with fabric, I designed a series of magnetic holders for magazines, firearms and accessories. Strong…
I have had the swith-pros panel since 2018 but never had a good mount for it. Originally I had it just screwed directly into the end mesh piece of my 2018 f150 overhead console. The mesh insert has become warped and now that i have a 3d…
G&G sells these but they're very expensive so I just designed my own. Uses 2 M5 screws and nuts.
Just my Remix of the Stock Tube Extension for Arp 9 and Arp 556 Print instructions Category: Sport & Outdoors Summary Just my Remix of the Stock Tube Extension for Arp 9 and Arp 556 Print Settings Printer Brand: Anycubic Printer:…
This is a stock extension for PS90. This will not fit airsoft. The passthrough hole in the stock is for the sling (Stargate style). It has a hole inside for the part of the bolt that extends into the stock. Best printed with fuzzy skin.…
The factory moderator on the AV Alpha was honestly not bad (better in my opinion than the Avenger for sure) but I can do better. The design uses cones to strip air from around the pellet, and bleed holes into an outer plenum to further…
Parts needed for this install: Thermalright AXP90-X53 M3 S Threaded Inserts Mini Heatsink Kit M3 Button Head Screws
My SHP-5000 headset fell and the clip that holds the top cushion on broke. Designed this in tinkercad, and seems to work well.
The food processor does NOT work if the bottom of this piece is broken off, and mine keeps breaking off. So I modeled this up so that I could replace the original part. Works good enough in mine. Edit: Updated as the original bent into an…
Holster for an HK VP9 using the rail, which enables easy holstering (and removal) when large attachments are on the rail. The mounting holes are 32mm apart, and fit common Safariland and other belt attachments. There are several hole…
A simple wall mount for a deco p9. Note this one feeds the power cable through the base. No allowance for Lan connections in this design.
This is a Gun Stand for the Walther P99 P.A.K.
If you've misplaced the original metal fan clips, or if you want to mount a thicker fan, this bracket is for you. First, attach your fan of choice to the bracket with typical PC fan screws, and then the bracket clips to the cooler in the…
I made this in an attempt to organize my larger storage bins. This was tested with P90 mags made by 3 different manufacturers. Some will fit snugger than others.
I wanted a box to store the MPD-P906/MDP-M01 lab supply that had the same size & shape as my TS101's box. I couldn't quite get it the exact same shape, but the footprint is the same as the TS101 box. I made this to have a thin adhesive…
Stepper assembly (and original X joint) files now updated to the 1.1.6 version! This is a coreXY mod for the old Flyingbear P902 based on the ZeroG Mercury One.1 (R1.1.5). Most of the part are the same as the original design and you can…
Short Note: As with all other firearm replicas depending on your color choice this looks like a real firearm. Dont be an idiot. Always check local laws and regulations. Incorrect handling might get you harmed or worse! This model is based…
This insert for P90 hi-cap magazines prevents BBs from entering the feeding wheel in the wrong direction, which otherwise prevents proper feeding and causes the spring to unwind uncontrollably. Glue the insert to the location marked on…
Wanted to mount my P90 onto my wall as a decoration so made this up fits my we p90 (TA 2015) and may fit others though I'm not 100% sure I printed in PETG and with 70% infill
EDIT: You MUST print this in TPU as stated in the description. If another person reaches out to me on Reddit because they can't figure out how to put their PLA buffer on, I might lose it. Please, PLEASE, print in TPU. HOW TO PRINT 1) Have…
Replacement charging handle for the airsoft MP9.
California compliant stock and forward grip blocks to make a P-90 compliant. The one in the pictures is a Ruger 10/22 in a High Tower Armory 10/22 P-90 stock kit. It should fit on an actual FN P90/PS90. (rimfires aren't considered an AW…
It is basicly the Ace Arms VP9 compansator, but it will fit on any airsoft pistol with a threaded muzzle. Airsoft only!! ;) There are two versions one with a 14mm CCW thread and one without a thread. For mounting you will need two M3 grub…
Gibson made the SG Pro for 2 years, and the pickup and rings are a different size than a traditional P90, so they are literally unobtianium at this point. I acquired my 72 SG Pro and the brittle bakelite pickup rings were cracked (at…
Custom compensator for UMAREX P99 DAO airsoft pistol, i just made something i liked the look of, it is not really based off of any real compensator. Needs an M4 nut and screw (i used nylon screws), i also removed the orange tip from mine…
“Can I have a new pen for my Promethean board, I've lost my old one”. Ah, the usual weekly service ticket; another lost pen which needs to be replaced. Why not replace it with something relatively quick to print, cheaper than the…
UPDATED 1/12/2026 - Included bracket for the MSI B850 Edge TI board (uses coarse fan screws) UPDATED 1/11/2026 - STL file updated to 5.5mm offset instead of 3mm downward - Fusion file updated to have parametric adjustment for vertical and…
Mag holder I designed years ago for my airsoft P90 mags. Connects to a belt. Mag slides in and out easy. Also added the STEP file for anyone looking to change my design up a bit.
Reduces the stock 15 round magazine down to 10 rounds for communist states California, New Jersey, New York, etc. You must epoxy the base plate on so that this limiter can't be removed for this to be legal in commie states. For the Smith…
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of 5.7x28 cartridges for P90. The cartridges are made exactly according to the machine documentation, so they are fully authentic. I have 2 variants,…
CMEE P90 Trigger v2.0 The trigger is a replacement for the standard crappy P90 electro-mechanical trigger of Cyma, Cybergun, Classic Army, Tokyo Marui and similar AEG airsoft replicas. It improves trigger response and the feel of the…
These designs can be used to extend the new arp9 68rnd mags. The small extends it to around 84 bbs, and the big one to 104 bbs. I didn't test the medium one. You'll need new springs. I just cut up the mag spring of an M4 midcap. I cut the…
This is a Mount designed to interface with the optics mounting screws on an FN P90/PS90, The mount is compatible with all Surefire Pro Series light bodies (the ones with the hinge mount) Using OEM Hardware Please Note that as this is a…
P90 CS2 charm, designed to add it to yours bag/keys based on the gun model from game Counter-Strike 2 Remember to scale it up before print!
This is a light diffuser for the SmallRig P96L RGB light. Here are the print settings: Layer height: 0.2mm Filament: White PLA Top shell layers: 1 Top shell thickness: 0mm (Change to a higher value for less light passthrough) Bottom shell…
I printed this P90 pickup router template in PLA using extra walls to reinforce the area where the router bearing wil ride. I use double sided tape to attach the template to guitar body while routing the opening.
Sometimes, on cheaper guitars especially, the pickups are way too low and that impacts the sound quality of the guitar. These shims raise the height of P90s. They go between the pickups and the body of the guitar. 2.5mm Tall, you can…
V2 is a stronger version with 4 slots instead of 2 large ones. It can also be printed without supports.
Krytac P90 Side picatinny rail. in thre different versions: Cilinder head, Sunken head and button head screws. Walls: I suggest at least 4 Infill: anything over 20%
USB-C Trigger board case Things Used: (non affiliate!) USBC Trigger CTP9 Category: Electronics
Racing Rear Wing for Carrera Porsche 911 RSR 1/32.
This is a larger fuel tank to replace the one on the USA Trains GP7/GP9 with rooftop "torpedo tube" air reservoirs, The air tanks were moved to the roof to accommodate larger fuel and water tanks on the prototype. Space for commonly used…
Here's my P90 conversion for a Rival Charger! I've seen a few concepts and other similar bodges, but I figured I'd take some time to sit down and work it all out. It's mag-fed and full-auto, with 95% drop-in 3D printed parts. Most of it…
The source marked this model as adult content.
REPLICA CANIK FLAT TRIGGER, SAME AS REAL ONE, MADE FOR AIRSOFT SYSTEMS. PETG ON ITS SIDE WORKED BEST FOR ME.
This Speedloader Adapter was made possible through the help of Björn from "Pfitzner Waffen", who was an absolute Lad and provided the magazine. Be a trooper and give him some love! His Store → https://www.pfitzner-waffen.de/ ---Don't you…
Competition-style magazine base to suit the block-base, 10-round magazines to suit the Canik SFX Rival / Rival-S, TP9
Kessil AP9X Extruded Aluminum 1010 Mount
P90 TOP PICANTINI RAIL - HOLLOWGRAPHIC RETICLE REPLACEMENT DESIGNED TO FIT WITH CLASSIC ARMY CA90
This is for a P99 airsoft gun. PLEASE LIKE :) ;)
Wall art of an EP91 Toyota Starlet Glanza
TL:DR; Replaces all the internals of the top portion of the Hamilton Beach food processor so that I can push the button down to run the device. The Hamilton Beach 12 cup (Model 70728) food processor has a very complex mechanism to make it…
Replacement clip I made after mine broke. I printed on bambu P1S with PLA. Supports are built in. Be sure to snip off supports before using. Print on a 45 degree angle for long lasting strength. Hopefully this helps someone save a good…
Modell ist mit Fuzzy-Skin gedruckt. Montierter Griff: https://www.printables.com/model/181455-angled-vertical-foregrip-m-lok Step-File ist für individuelle Anpassungen auch hochgeladen
Save your thumbs when loading BBs
Arp9 Lower for the Airsoft ASG Scorpion Evo. MAKE SURE YOU KNOW WHAT YEAR YOUR EVO WAS PRODUCED. 2018 and newer Evos are a bit different from the older, pre-2018 Evo. If you pull back the bolt and your gearbox has the ASG logo, it is most…
A custom neck humbucker ring, designed to fit over a P90 cavity. Screw sizes are standard.
Found magwell for TR22 and customized it the way it fits SP9A3 as clip-on. Printed it with PETG, 0.12 layer nad maximum(16 for me) wall loops for maximum strength
This is a spare part for a spring loaded airsoft P99. I printed it in 45° position for more strength and with supports. PETG works well.
HP97 calculator printer vulnerable transmission gear Category: Other
This is a hard case for storing the SmallRig P96L RGB light. I printed this with: Filament: Overture PETG Bed temp: 80C Nozzle temp: 240C Infill: 10% Layer height: .2mm Print with the flat sides down. I did not use any support or bed…
Let me introduce this Mini Project. It‘s basically a case for a small DI Box. there are active and passive dI Boxes avaiable. Both will fit in the case We are using M3 Screws and we are using the CNC Kitchen threaded insert M3. But there…
A relatively simple P90 style handguard with a rail piece in the front and M-lok on the sides Re-upload of my design on thingiverse, since I prefer Printables
Foregrip created with the p90 grip. Like the one worker sells. You don't need supports on the inside and print it in the orientation it's in right now.
