Counting matching models…
The thing that holds the plate rack together kept breaking. Here is a new stronger one for the Fisher and Paykel dishwasher. I did with 60% infill. Few months later and the ABS is still fine.
remix, this one lets you clip in the racks but also allows you to lock in the rack on the bottom
Someone asked me to make a copy of this little tab for their refrigerator, to replace a broken one. I also included a STEP file if you need to make modifications.
Should fit various models. Print it with TPU. Ninjaflex is a little softer than the original part and is challenging to print with. Or, Ninjatek Cheetah is quite a bit firmer than the original part - maybe reduce walls to leave fins…
These are press-fit replacements for the clear plastic pieces that fit into the aluminum extrusions at the back of some Fisher & Paykel manufactured (including DCS branded) fridges' shelves. They are equivalents to Fisher & Paykel part…
Our Fisher and Paykel BI602X Wall Oven started to have an issue with the Soft Touch Buttons. The button edges started to crumble. It was only a matter of time before the buttons would stop being functional and they were starting to be…
A drain hose loop clamp for Fisher & Paykel dual-drain hose DishDrawers, US/Canada models. Good if you can't use their supplied one due to space. DishDrawers have some specific height requirements for the drain loop, and the supplied…
Printable spare part for the Fisher & Paykel DW60FC4X1 dishwasher
The original fabric softner dispenser broke. I redesigned the part to be a bit tougher. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: 0.28 Infill: 100% Filament: esun PETG Category: Replacement…
I accidentally broke the pinion drive gear on my fridge drawer so I modeled a replacement. This pinion drive gear is a replacement for Fisher & Paykel part no. 838502P. No supports required. Recommend printing in at least PETG or ASA.
This is a 1-piece replacement for the original Fisher And Paykel button support used in models DW60OUC2X, DW60OUC6X, DW60OUC6B.DW60OUC2X, DW60OUC6X, DW60OUC6B. Click here for instructions on how to replace it .
These are the sliders and pins for the side rails of the Fisher and Payker CosyCot neonatal heater bed. I suggest PETG / ABS printing, but the sliders in PLA eventually supported the side rails and bended the central line without…
Replacement feet for a Fisher & Paykel ED56 clothes dryer. I have made the feet 10mm lower than the standard feet to clear tighter spaces if needed. I've had success printing in PLA+ with 25% infill but will be printing in TPU .4mm…
Fisher Paykel Spline Driven - 425080 or part of kit 479318P. Half of the dog clutch in the center of the was basket. Needs to be printed out of something tough,like PC-GF in my case, but PA6, PA12 etc should work as well. For PC-GF I used…
My Fisher and Paykel Refrigerator has an Ice Maker. This is a copy of the bracket that holds the termistor onto the bottom of the ice tray. One of the pegs broke off my original bracket causing the thermistor to dangle down into the ice…
The thing that holds the plate rack together kept breaking. Here is a new stronger one for the Fisher and Paykel dishwasher. I did with 60% infill. Few months later and the ABS is still fine.
Update 2: PP works well. Getting it to print without warping is not the easiest. Maybe try an enclosure to increase your odds. Update: The PETG didn't last (warped, broke). Also, high temp glass filled PLA from polymaker (ht-pla-gf)…
My latch broke, created a replacement part. You will need a 3mm plastic screw (6 to 8mm), as I really wanted to optimize for strength by not having loads in between the layers. Ideally print in Nyon, however ASA and ABS should work fine
Replacement button for controlling the timing buttons on a Fisher & Paykel oven.
This is a replacement clip I made for the upper door flap on my 213L Fisher & Paykel Vertical Freezer. The original clip was made from injection molded ABS (picture of original included). Fisher and Paykel part number 855140 This is not…
Replacement rear left glass rack for Fisher and Paykel two drawer dishwasher. I had to shorten it by about 15mm to fit on my printer, but still seems to work with a little bit of a gap. I printed in PLA+ and worked, however did not like…
