Counting matching models…
Update 10.02.2023: I remixed the rotor with the toroidal design :) Feel free to test ist out! https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller In addition, there are now many other great remixed propellers…
This is a remix of my Flying Copter Toy :) My first ones still last strong but everyone is talking about toroidal rotors. I really like this design and I think it is a meaningful appreciation of the main design. But try it out yourself! I…
A small and simple flying propeller toy for all ages. The propeller doubles as a spinning top when it lands. Print instructions Just print and play
This is an OpenSCAD module library for propellers and spinners. See this excellent video by Bruno Antunes on how to integrate this library into Fusion 360. This design models elliptical propeller blades that transition smoothly through…
This is a high-power flying propeller disk launcher, that uses a compound/stacked planetary gearbox with a ratio of 1:64! (x4 each layer) Video of it in action: The gearbox layers print-in-place, and are designed to easily assemble with…
This is my WIP third generation tri-loop or tri-blade design which improves upon the second by following more traditional rules of propeller blade design whilst also reducing weight at the outer edge, (hopefully) improving prop response.…
Updates description at the bottom Overview A model of a variable pitch propeller mechanism based on a 1935 patent by Robert Stanley, adapted for 3D-printing. Variable pitch propellers allow the pilot of an airplane to adapt the angle of…
Printed in PETG provides adequate flex for putting them on and off multiple times.
New update Version 2: https://www.printables.com/model/635059-propeller-version-2 Buy me a coffee If you like my work, you can buy me a coffee . Appreciated!
Hello There! This Pusher Propeller ( P-Prop ) Plane is a model designed with the goal of being close to 100% vase mode printing and is capable of being printed in both LW-PLA and PLA. (UPDATE 2/5/2023): A new wing design with support for…
Boat Propeller I designed to electrically drive my canoe. It can be driven with a battery drill. Edit: /* To clear things up a bit. 20cm_10mm.3mf is a propeller with 20cm diameter and a hole for a shaft with 10mm diameter. 30° tip angle;…
This is my second generation bi-loop or bi-blade design which, is much more like what the MIT boys pumped out, featuring a more teardrop-y kinda' shape. Much like V3 of my tri-loop design, these ones again follow a more traditional…
Printed with 0.4 nozzle, brim for extra adhesion and supports. Sharp small scalpel is recommended to remove brim and extra material I've put on holders so it can be printed, it's only 1 wall thick and should be visible line that follow…
Een kleine propeller van in de les Inventor 2022. A small propeller from the Inventor 2022 lesson.
Overview This is a filament pelletizer which converts old or unwanted filament into short pellets. It aims to be safe, tidy and easy to use. My favourite feature is the self feeding mechanism that is geared from the power drill input. To…
I loved the original toroidal pull-copter design, and thought it would look cool if I combined 2 together. It weighs a little more than the original, but I feel like it's more stable in flight, and it looks cool! Prints great in PLA and…
Be careful!!: 3D printed propellers could possibly explode when reaching high rpm's. I strongly discourage using it in BLDC motors, or any other high-rpm motor. I just modified the original code (many thanks to the og author, great coder…
a drone propeler with diameter 4.8 cm
This 3D model of Turbo Impeller. This model does not use the standard size of the manufacturer. Only for test 3D print and display.
I build faster, more agressive propeller for minn kota trolling motors (my is minn kota 50lbs, can be installed on other models. That is first version of it. After tests I add a more pictures there. I add a small center part of if too, so…
Printing this as replacement prop for Harbor Freight RC Neptune boat. I really have no idea about RC boats, or propellers, I just eyeballed the plastic ones that came with the boat and modeled it in blender Main reason is that this PLA…
In 3d printing a RC Stearman model I needed an 11x5.5 prop. Instead of paying $3 for one I spent thousands of person-hours using high-expertise design skills to build this! It's a procedurally generated propeller design that's…
This is one of the toroidal propellers we've tested in this video: https://youtu.be/w90gM7bGdvk This is the right propeller. To get the left version, simply reflect it in the slicer. We've achieved the avg max speed of 2.26 m/s, at 1079W…
Introduction When first learning to fly RC airplanes, it's hard to overstate the importance of a steady supply of spare parts. Flying is quite easy; it is landing that's hard.* The Ares Gamma 370 was not my first RC plane, but it was my…
Compatible with bumper: https://www.printables.com/model/856904-dji-avata-2-bumpers Great for flying through the woods and using Turtle Mode on the grass. The shields look too short, but it's not a bug. It's a feature - guards stay in…
forked an open source toroidal propeller generating tool to add the appropriate hub for the launcher. Flies much further than the propeller design in the original project! Modified in Solidworks after export from SCAD to add fillets.…
Simple yet fun toy to use outside! Be mindful when using indoors, your walls will thank you later. I created this model in aim to replicate ones seen at local events in my area. After researching more on these toys I found you generally…
Dive into the depths with this groundbreaking 3D printable underwater torpedo! Powered by a revolutionary rubber band motor encased within its sleek design, this torpedo boasts toroidal propellers for unparalleled aquatic maneuverability.…
Ultimate Toroidal Propeller Generator The Ultimate Toroidal Propeller Generator is an open source project that provides a way to generate STL files of toroidal drone propellers. 🔽 Download SCAD files here 👉 Go to Ultimate Toroidal…
Herewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 45mm Bore diameter: 4mm Pitch: 50mm Height: 19mm Type: DriveDog 3,7mm
●Updated April 11th, 2023 at 6:49 PM Japan time. I have made adjustments so that the shaft and gear do not spin idly. As a result, all parts in the Main body parts folder have been updated. ●Updated March 18, 2023 at 2:25AM Japan time.…
Herewith i want to show you one of my designs for a 3 Bladed RC boat propeller. Outer diameter: 40mm Bore diameter: 4mm Pitch: 50mm Height: 15mm Type: DriveDog 3,7mm
Video performance demonstration through the following link- All components 3D printed except nine M4x16 hex head bolts & nuts and one M6x50 hex head bolt and nut . Size: roughly 80mm x 80mm x 50mm Couplers intended for 1/2"IDx 5/8"OD…
Fusion 360 file with parameters that lets you create different propellers. List of parameters: wings_count: Number of wings wings_d: wingspan wings_h: height of the wings wings_turn: angle covered by one wing (must be between 1° and…
You will find detailed instructions on printing in the original models or if you have a Prusa MK3S(+) use my pre-sliced files with PETG. Those files max out the print bed of the MK3S+. For the rotor, I had to redesign the model since the…
Toroidal propeller for rc drones
[Parametric Fusion file for designing toroidal propellers (for drones)] V2 AVAILABLE NOW!!! Changes in V2: Blade Count Parameter! (Be careful with the count or else fusion might crash. DON'T TRY OVER 100!) Parametric Fillets to improve…
IGNORE this version, we're onto V3 already! Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone…
Part is printed with PETG and need partial supports.
Product Description: Introducing the Pull Copter, a 3D printable toy for kids and kids at heart. It comprises just three parts: the pulling rod, the propeller (or spinning top), and the base. There's no need for assembly—print, play, and…
This is my second design on a propeller holder for the DJI Air 3. PLA/PETG/TPU/... approved. I added some arrow to the lower part, the tip needs to face in the front direction of the drone. Also I added an DJI logo next to the smart-clip…
A compact case to hold propellers for the DJI Mavic Air 2. The propellers slide onto rods printed in the base of the case, and the propeller tabs rest in recessed holes on the top and base of the case. Remember to always inspect your…
I think the Sharrow MX-1 is pretty cool looking and if it lives up to the hype perhaps a new standard in marine propellers. Print Settings Printer Brand: Creality Rafts: No Supports: Doesn't Matter Category: Hobby
Propeller Holder for DJI Mini 2 Should also fit DJI Mini SE and Mavic Mini and Mini 4k, although not tested. Please share if you try. Can be printed with PETG/PLA/etc or flexible filaments like TPU. I recommend changing no. of perimeters…
Beim Bambu Drucker war ein kleiner Propeller dabei. Erinnerungen an früher kamen auf. Ich dachte, es geht auch besser. So entstand dieses Projekt hier. Druckgröße ist 180 auf 180 mm. Ich habe absichtlich Step Daten hochgeladen, bin kein…
Version Original: https://www.printables.com/model/608372-propeller Buy me a coffee If you like my work, you can buy me a coffee . Appreciated!
Watching the video should explain it all, but basically I'm attempting to further develop upon MIT Lincoln Lab's toroidal propeller concept by offering up my design for anyone in the FPV drone community to have a go and see how they like…
This Time i modelled an UNDERWATER POSE ! This was a request from a good friend who wanted to print some Poses. --------------------------------------------------------------------------------------------------------------- But do you…
This is a folding propeller I created years ago. I flew this propeller myself on upscaled (130%) versions of the Nucking Futs printable pylon racer. Link to Airplane: https://www.thingiverse.com/thing:3358880 Please give credit to the…
A remix combining the good flying properties (my experience) of the Flying propeller toy by Harald Andersson and the coupling mechanism (square 5) of Strong Flying Propeller by Meister Edel I made this remix after testing for use with my…
62mm propellers with a hole for a Lego axle. Print with supports, dry your filament and ensure good cooling. The blobs on the surface are because of wet filament.
This version combines Kucici's excellent DJI Avata 2 Bumpers and Propeller Guards into a single model with the addition of clips to hold them firmly in place on the DJI Avata 2. Propeller guards have also been modified to provide better…
Yet more DJI Mini/Mini 2 Landing Gear Extensions. These are light, about 5.5 g for all four. They add about an inch (25mm) to the height. I used PETg, but they should be fine with other materials. I used .20mm layers. Could have used .15,…
none of the 5045 tri-props i found online provided enough thrust so i modeled my own uses a NACA4415 airfoil
Press fit propeller guards for DJI Mini 3 Drone No extra material required Easily mount/dismount onto the motor case No sensor interference Print Settings Printer Brand: Sovol 3D Printer: Sovol SV06 **Supports:** No Resolution: variable…
As with the original spitfire model, gluing of the body halves, armaments, horizontal stabilizer is required. your choice of smooth spinner, or full propeller (also needs to be glued and assembled. Category: Vehicles
For ease of use and playability, I prefer children to have a hand-thrown airplane. However, the available options for this type of airplane are almost the same. Making a hand-thrown airplane with balsa wood and film is very cumbersome.…
ITALIANO Ho disegnato questi ferma eliche basandomi sul modello di NassosT cambiando alcune misure aggiungendo una parte per proteggere anche l'estremità delle eliche. Ci sono due modelli, uno che riporta il mio logo ed uno neutro senza…
I did not print with supports but they may help. The propeller should make for longer flights. Enjoy!!!
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to design more…
Application This is a high performance 6x3 propeller for RC model airplanes. The 6 means it has a size of 6 inch in diameter (roughly) and the 3 means that is has 3 inch of average pitch. Thanks to the straight form, without the usual…
Just learned how to make propellers... so here´s a few! Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: 99 Filament: any PLA Notes: You might have to use a small brim for…
I originaly intendend this propeller to fit for my DIY electric SUP-board motor but you can use it to drive what ever you want. this design fits on 10mm D shaft but you can easily modify the design to fit any other type of shaft. Keep in…
125mm - 5" výška 10mm PETG - Podpery nevyhnutné, ideálne Organic
Propeller Guard / Blade Protector for DJI TELLO micro-Drone. Print with support. Thinner and lighter than the genuine ones. UPDATE 23/03/2020 / v2.5 : here is a slightly thicker version (the original file is a bit sketchy, so changing…
Petite hélice qui vole très, très haut! Si vous regardez, ma video Tiktok @laure3d vous verrez que je l'ai perché tout en haut d'un arbre! Ceci est un remix du modèle d'Harald Andersson. Les hélices sont orientées dans l'autre sens ainsi…
My son suggested a crank handle might be easier to use than the original twist handle. It also provides more leverage to launch the propeller further. We tested two different lengths. Both files are included. The long handle provides more…
MK4 7-Inch Drone Propeller Guards This project is proudly sponsored by PCBWay – Your One-Stop Solution for PCB and 3D Printing Services I’m excited to share my new propeller guards designed for the MK4 7-inch drone frame . These guards…
UPDATE 2023-09-30: I have now made version 2 of the remix. The securing pin is removed and a similar funcion is integrated directly in the handle, making the handle assembly consisting of 3 parts. The gear is secured by a springy snap pin…
Herewith i want to show you one of my designs for a 2 Bladed RC boat propeller. Outer diameter: 59mm Bore diameter: 4mm Pitch: 50mm Height: 19mm Type: DriveDog 3,7mm
In this remix, models from https://www.myminifactory.com/object/3d-print-zip-top-spinning-top-14005 were edited to improve the handling of the launcher. It is a fun toy and makes a good gift for a kid to play outside. It prints well in…
A Custom plane propeller that I made for my Pichler C9104 brushless motor (https://shop.pichler.de/Brushless-Motor-BOOST-40-V2) Blade size is 100mm per blade and a 20.3mm "base: to which the blades attach. Easily fits on a Mk3/4 bed. End…
Launch your propellers using this mechanical marvel instead of a rip cord. For the standard coupling I used the square coupling (same as Meister Edel did). To possibly create other coupling mechanisms I have added a stepfile of a coupling…
Drill Powered Outboard (Work in Progress) https://youtu.be/Ix5F3YQOyLg Assembly requirements: Print 1x Propeller of your choice There is an edgeless propeller (prefix WIP), but it is an untested work in progress and requires two M10 nuts…
Ein einfacher Halter für die Propeller der DJI Mini 3 Pro. Durch die Verbindung (z.B. mit einem Stück “ca. 4-5 cm” TPE/TPU - durch das entsprechende Loch stecken und mit dem Lötkolben veröden) geht nichts verloren und lässt sich zudem…
With this minimal propeller cover, you can transport your DJI mini drone safely.
so... more = better Please see the accompanying video: https://youtu.be/hby6U47oV_k WIP, please see the older d
DJI Lito 1 / x1 propeller holder No supports needed. Printed bracket in PTEG, starp TPU 95a Added v2
I've always remembered this toy from my childhood, but flimsier and easier to lose, so I made this sturdier, compacter, more fun version.
Kitty litter scoop to separate intact pine pellets from the spent sawdust. Not designed to remove waste from other types of litter but it may work for that, your mileage may vary. Print Settings Printer Brand: Monoprice Printer: Maker…
A 2-in-1 device. Allows you to fill the chamber of your vaporizer with the funnel, and/or press a strong and dense pellet. Normally, due to the low density, a small amount of 0,10 g would totally overfill the chamber, leading to muted…
Die Propeller Fixierung ist aus PETG (ERYNE) gedruckt und man benötigt noch ein Gummiband (Durchmesser ca. 100mm) für Fixierung der Propeller auf der Unterseite. The propeller fixation is printed from PETG (ERYNE) and you need a rubber…
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
This is a remix of the original variable pitch propeller mechanism designed by Chris B. After printing and assembling the original model, I decided to make several small mechanical improvements to improve the strength, rigidity, movement,…
*** UPDATE *** Apparently the front arms (that I didn't modify) were an issue, so another user has done their own remix to fix those up too, which you can find here:…
This kite reel/winder is awesome. It'll easily hold 1000 feet of 50lbs line (I have 500ft of it in some of the photos). It's also quite easy to print and assemble! It's also a bit of a fidget toy if you don't put any line on it... It's…
Models of 2-blade and 3-blade variants of a Hamilton Standard aircraft propeller. There were many slightly different shapes and sizes, so treat this model rather as a “close enough” generic propeller, usable for most aircraft of the…
Inspired by a helicopter model. I made a print-in-place airplane for a fun toy.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to add 3 blades to a…
airplane propeller r80mm h10mm dh5.25mm
The best way to remove the supports is to separate them as a whole with a knife. I carefully pushed the knife between the propeller blade and the support from the leading edge. I removed the inner part with narrow pliers and cleaned it…
so... more = better \_(ツ)_/ Please see the accompanying video: https://youtu.be/hby6U47oV_k WIP, please see the older
After realizing that other items, similar to this one, require too much elbow grease after print work, I wanted to design a new one, as a print in place and assemble. No additional processing is required. After all, the Alpha and Beta…
Blades for drones, you need to print 2 left and 2 right mirrors to each other. It is better to leave the fill at 100%.
This is an even larger propeller for the Pull Copter (https://www.printables.com/model/227852-strong-flying-propeller-pull-copter-no-supports). I made it 225mm, which fits nicely on the X1C print bed without needing to remove the…
This is my model for the Beeverycreative 3Dprinter competition. Project is under development but printable without any support on most printers. More "flying things" will be added! :) (Yes, even pigs will fly) Update: 30/4 Lid version3,…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I enjoyed printing @Meister Edel's Pull Copter and wanted to try designing a…
