Counting matching models…
The Graphgear 1000 is a great pencil, but one of its biggest issues you can see in the Amazon reviews is the fact that the plastic barrel breaks easily over time. Rather than throwing mine out and getting a new one or continuing to super…
Perfect desk drawer storage for the Pentel Graphgear 1000 mechanical pencils. Non-Stackable pencil tray, 2 gridfinity units high plus 6mm of pencil above lip. Custom cut out shape to cradle the Graphgear 1000 with a 3 degree tilt for easy…
This is a centerline marking scribe, similar in general function to many other centerline scribes. However, it is custom designed to fit the Pentel GraphGear 1000 (PG1019) 9mm mechanical pencil (7mm & 5mm would probably fit as well; other…
This is a replacement cap for the Pentel GraphGear 1000 pencil. It has quite tight tolerances and I recommend any hard filament at 100% infill, 3 perimeters, and 0.1-0.15 layer height. Designed in Fusion 360.
A coworker had a pencil holder he designed like this on his desk at work. My son mentioned he wanted something similar, so I made my own version. It is an easy 3d print with a color change at layer 1.2mm and back at layer 3.2mm. Then glue…
Just a quick model I whipped up to protect the tip on my Graph Gear 500 from accidental drops and my hand or thigh from surprise acupuncture sessions. This was designed and tested with the 0.5mm version; however, the tolerances at the tip…
Printed with 0.6 mm nozzle Layer height 0.08 mm Time to print 1 H Straight knurled grip for mechanical pencil Pentel 1000. Just the thicknes alone makes the pencil handle better and the layers lines offer a nice grip.
My solution to my own problem. Figured I would share it. I hated the tiny eraser that came with my beloved P209 pencils and I hated the metal cap that I would constantly have to remove and was always afraid of losing. It press fits into…
Holder for your 0.3, 0.5, 0.7, and 0.9mm Pentel GraphGear 500 pencils. Will also hold a container of lead for each pencil and a Polymer Eraser.
This is a neat shell I made for a pentel P207 (It can also be used for the pentel P205 with no issues) Be careful with the bed adhesion for this one, I would use a brim. Depending on the filament used you may be in for some more post…
This cap will work with all Pentel PGx and P20x mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip.
Gridfinity 1x2 bin that holds up to four Pentel Hi-Polymer Erasers w/ sleeves. Print looks bad, was testing something, should not look like that for you.
This cap will work with all Pentel SMASH mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip.
Organizador para Pentel Graphgear 1000, se puede colocar 4 paquetes de puntillas y tiene para poner repuestos de borrador, fue pensado y diseñado para el paquete premium graphgear 1000 pero es compatible con cualquier Pentel Graphgear…
Pen holder for Pentel Brush Sign Pens. The pens are spaced so you can pick up a pen from the middle. Pictures are from two pen holders glued together.
Leider war ich mit den Originalminen von Montblanc nicht so zufrieden. Mit diesem einfachen Adapter ist es möglich die Gel-Minen von Pentel (KFR10 für K160/K230) zu benutzten. Wackelt nicht und die Mine sitzt stramm im Rollerball ;-) Ich…
Blank grip for mechanical pencil Pentel 1000. Just the thicknes alone makes the pencil handle better and the layers lines offer a nice grip. This will later be remixed with grip designs and textures and maybe even other shapes. Stay tuned
Pencil holder for the set of 5 Pentel Pencils - Wall / board mounted with teh pencils at an angle.
Holder for four Pentel Maxiflo whiteboard pens. As a trainer/consultant, I love me some whiteboard pens, and these ones are great - especially for writing on flip charts. BUT! There are a few issues with the pens: Where I live, they don't…
This cap will work with all Pentel PG100x mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip. You…
After looking high and wide for a capped pen body that was Pentel Energel 0.5mm compatible, I finally found the Pilot Explorer Gel line. The Pentel Energel LRN5-A 0.5mm needle tip is my favourite refill, and it almost fits perfectly…
The push button of my Pentel EnerGel Alloy (RT BL407S-A) snapped off someday, and I lost it somewhere in my school when it was in my pocket. I found that the caps from Pilot G2 ink refills with the open end chopped off near the taper…
a replacement cap for a pentel water brush
This is a super simple model that fits on a Pentel Hi-Polymer Eraser to give you better grip and prevent the paper from getting worn. It fits very snugly, and makes a super satisfying pop sound when you pull the eraser out of it. (it's…
Holds a Pentel RSVP refill, providing a larger area to grip and without the rubber which can become sticky over time. This version does not include a cap. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…
I wanted a simple stand for the various Pentel Stein leads I keep on me and my desk. I added hidden holes to put pennies in for extra stability. Included is also a non-weighted option if you don't want to deal with pausing the print.
A Multiboard 1x1 bin lid modified to hold four Pentel FloaTune 08 pens
I have a few of these pencils with the fancy extendable erasers. The eraser ran out on 2 of them so I designed this to extend out so a pencil top eraser could go on the top. This way I didn't have to buy erasers Print Settings Printer:…
Holder for four (4) Pentel Graph Gear 1000s 0.2mm Layer Height, print with a brim.
Pentel Maxiflo Holder - Mixed Tip Sizes (6mm & 8mm) + Eraser Feature Summary This is a remix of the Pentel Maxiflo Holder by Austenite, modified to accommodate different marker tip sizes. The original model was designed for medium tips…
Bouchon de colle Pentel Roll'n Glue Impression en PETG ou PLA 100% de remplissage
Don't forget to check the bottom right of your eraser's label to be sure which size you have this one fits ZEH 05, for the next size up refer to the original model or scale as needed. print in provided orientation 0.2mm layer height…
Added holes and bosses to hold four Pentel P200-series pencils and four Pentel FloaTune 08 pens, converting the lid into a pen holder. Instructions Print using standard Multiboard settings 0.2 mm layer height 3 walls 15% infill Print face…
Description This is a pen cover that can fit the Pentel Energel refill, has rotatable fidgets on it and uses the same clicking mechanism. The fidgets were inspired by Sean Liang's sensory bolt action pen (…
I'm a huge fan of the Pentel P209 mechanical pencils. Their long and pointed nibs are excellent for detailed work. The 0.3 mm lead is almost as good a a marking knife. The down side is they will poke holes in you and your bag/clothes in a…
Lost the cap to a Pentel dry erase marker. This is almost a like for like replacement, only difference is the holes that prevent a child from choking are slightly smaller to prevent drying out. They still let air in, but I added some…
I made few caps cross different lines of Pentel Orzen pencils, please check the name of the model file for more details. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this…
Remove the rubber grip from the aluminum barrel and insert this in place to change the color of the barrel Requires High tolerance to print, enable detect thin walls
I'm a huge fan of the Pentel P209 mechanical pencils. Their long and pointed nibs are excellent for detailed work. The 0.3 mm lead is almost as good a a marking knife. The down side is they will poke holes in you and your bag/clothes in a…
Pen holder for Pentel Brush Sign Pens. The pens are spaced so you can pick up a pen from the middle. Pictures are from two pen holders glued together.
Pentelobe Star Knob for 1/4-20 nut or hex head bolt - three (3) to choose from: Medium Large Large with Deep Well To use, insert either the ¼-20 nut or the ¼-20 hex head of the bolt into the knob. It's designed for a press fit. I like to…
