Counting matching models…
EN Replacement needle with part number 9670-K for Passap/Pfaff hand knitting machines. An approx. 2 cm long piece of PTFE tube (outer diameter 4 mm, inner diameter 3 mm) is used for improved thread guidance. DE Ersatz Nüsschen mit der…
Best shot at printed part replacement, original part was ABS this can be printed in PLA as it has been beefed up in the weaker areas to account for softer media. Obviously, can still be printed in stronger plastic if desired. Have print…
This is a cover for the bobbin of a Pfaff Sewing Machine (Abdeckung für Spule)
I designed this utility tray for my Pfaff Passport 2.0 sewing machine. It holds all the bobbins and sewing feet in a neat fashion. There is still room underneath for scissors and other equipment. Print Settings Printer Brand: Zortrax…
I designed this presser foot for freehand sewing (with the feed dog disengaged). The circular profile allows the material to feed smoothly from all sides. The key to using it is to remove almost all the pressure on the presser foot - I do…
Several tolerances are available, the number behind the name represents the tolerance on ONE side of the diameter. Meaning that a tolerance of 0.1 is in actuality 0.2 mm smaller than the diameter it must fit into. *Use superglue to…
This is a replacement for a broken spool holder bracket for my Pfaff 90 sewing machine. It might fit on some other Pfaff models of the same vintage as well. Print instructions I used PETG.
printed at 0,2 mm height and added a metal rod to attach the foot to the sewing machine
I created a base for a vintage sewing machine (designed for a Pfaff 262) so that I can put the flat bed sewing machine on my desk. This is a very improvised design, not a lot of though went into it. Materials required: Silicone pads for…
Ein Ersatzteil für die Pfaff Nähmaschinen der Tipmatic-Reihe. Auf den Bildern zu sehen ist der originale Garnrollenhalter von Pfaff. Mein Teil kann diesen ersetzen. - A spare part for the Pfaff sewing machines of the Tipmatic series. The…
9033P bobbin for Pfaff Hobbymatic 807 Should be compatible with Pfaff Sewing Machine Models 90, 91, 92, 93, 94, 95, 96, 97, 130, 138, 229, 230, 234, 238, 259, 260, 261, 262, 284, 285, 285-1, 294, 295, 295-1, 296, 296-1, 297, 297-1, 300E,…
Little print usefull for the sewing girlfriend ! with space for sewing foots. Category: Tool Holders & Boxes
Les canettes de fils trainant dans une boite, ma femme m'a demandé de leur faire un support de rangement. C'est fait ! PLA , couche 0,2, sans support N'oubliez pas de mettre un petit ❤ si vous avez aimé, merci
This was my first farm to table print, I have an amazing old Pfaff 1222e sewing machine. I woke it up and flicked the take up lever which crumbled in my hands,… this left the knurled metal pivot intact but no way to turn it. I measured…
Shank for Pfaff machine with slight offset, about 2.2mm. Commissioned to make this to fit a specialized foot with hole offset too large for normal Pfaff shank. Thought someone else may find it useful in the future. Original shank files…
A replacement leg for Pfaff Quilt Table. Printed with PETG and variable layer height for accurate thread rendering.
Print as oriented in the file with supports and 100% infill. I used PLA, but PETG or ABS would probably make a more robust part.
Adaptér pro nasazení velké overlockové špulky s nití pro Pfaff Creative 1.5. Lze použít i na jiných šicích strojích.
Optimale Ergänzung für Näharbeiten an der Pfaff Expression, herausgezogene Nadeln und Clips können direkt in Ihre vorgesehene Box abgelegt werden. Eine der großen Boxen hat eine Aussparung für den Untertransporteurhebel. In beide Boxen…
The little acrylic (?) box that holds the lightswitch on Pfaff Hobby 301-420 sewing machines becomes brittle over time and easily breaks away at the screws. This is a replacement for the whole box, albeit I only tested and used the bottom…
Hi there :) if your PFAFF overlock sewing machine broke it's thread tower like my grandma's did (at the read line marked) last year, this is the right print for you. Originally designed for PFAFF Hobbylock 794 it should fit on other…
My wife asked me to do something usefull with my 3D printer… so i did. I designed this Spoolholder for her sewing machine cones. The circles have a diameter of 50mm and fit to Gütermann “Miniking” Cones. There are 6x4 circles.
The Bobbin holder is held in place by 3x9x9mm magnets. The pockets are for holding sewing needles in place by magnetic magic. The old hard plastic part broke because the sewing machine was put in storage with the bobbin holder engaged. In…
I needed a quick replacement for a Pfaff Variomatic 6085 til the new aluminium one arrived. Fits perfect.
It's a common failure on these Maschines from the 60s and 70s that the small plastic part that pushes the motor to be easy on the rubberdrive, breaks after the years. This part replaces it. Have fun with your awesome highquality…
My grandmother is now a grumpy old woman and breaks a lot of things. Her latest victim was her wonderfully functional palm rest on her Pfaff sewing machine. I redesigned the torn-out hinges and fixed them with CA glue. In the unlikely…
My wife needed a wastebasket for her sewing machine. And I wanted to be “best husband” :-) Printed in PLA (doesn't matter) with 0.6 nozzle and 0.32 layer height using the input shaper profile. Printtime around 2 hours. Da meine Frau einen…
Sewing Thread and Bobbin Pin Holder for IKEA Skadis Adjusted to fit larger diameter but shorter bobbins used in PFAFF sewing machines, compatible with Pfaff 1469 1471 1472 1473 1475 1475CD 1520 Select 3.0 1069 6250 6270 Creative 2134
Printer : i3 MK3 Rafts : No Supports : Yes Resolution : 0.20 Infill : 20% Filament : PLA
Notes d'impression Nécessite des supports. Penser à mettre les supports sur la face qui sera la moins visible après montage.
Print in your choice of filament, 0.2mm layers works fine, 2 walls, 15-20% infill of your choice. Use a zip tie to lock both sides together. Sides A and B provided (print both flat, supports needed), as well as the full model (which must…
Locking handle for embroidering hoop (Husqvarna / pfaff)
Adapter to use a Pfaffenhain knob lock with a Nuki smart lock Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** Yes Supports: Doesn't Matter **Resolution:** 0.1mm Infill: 50 Category: Replacement Parts
The brown, broken part is the original one. I printed the part with PETG Filament with 0,2mm layers. Category: Replacement Parts
This is very simple tray to fit PFAF Passport 3.0 (should fit also 2.0) sewing machine. Warning It is longer that typical printer can print. It is 30cm long. If you need smaller, feel free to import in fusion 360. File is included. Or you…
Modified the dimensions slightly. Raise height, made click mechanism some tighter. Printed with PETG, used Superglue for durable connection. Happy Sewing! Explore my other Printables: https://www.printables.com/de/@Tritschi
Pfaff Hobbylock 2.0 Thread stand replacement part. Category: Hobby
Note de montage Utiliser un marteau pour bien encastrer la pièce.
Uses the original screw and bobbin winder
Replacement parts for the Handwheel of Pfaff Tipmatic sweing machines. For the full function of the mechanism a compression spring (length = 22mm, diameter = 4mm) is needed. It is used to pull down the slider at the inside again. When…
spool holder for 26mm spool used in Pfaf1245 and anether pfaf sewing machines,build in FreeCAD and exported STL
Bac de récupération pour machine PFAFF hobbylock 756 Largeur 100mm Hauteur 80mm Profondeur 50mm Impression : Matière : PLA Hauteur de couche : 0.28mm Murs : 2 Remplissage : 15%
Got a call from a friend who owns a fabric crafts shop regarding her 1984 Pfaff sewing machine. it lost a foot and now wabbles on the table. Using measurements from one of the still remaining feet I made this. Hopefully someone else can…
A belt cover plate for the Pfaff 260.
My wife needed a wastebasket for her sewing machine. And I wanted to be “best husband” :-) Printed in PLA (doesn't matter) with 0.6 nozzle and 0.32 layer height using the input shaper profile. Printtime around 2 hours. Da meine Frau einen…
3D printable topographic miniature of Pfaffenhofen an der Ilm - 🇩🇪 Germany Capture the beauty of Pfaffenhofen an der Ilm 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…
