Counting matching models…
I saw a few of these around, was bored one day and decided to mess around with designing one. I printed it in Turkey Egg from Filamentium….fun filament! Enjoy Designed with those who don't have the most elaborate printer in mind. **…
The source marked this model as adult content.
IMPORTANT: This is just a model shell grip for a VR controller. NOTE: This is for the Oculus Quest 2/3 controllers. If you are looking for the Quest 1 version, see here . NOTE2: This will fit a Quest 3 controller, but it may be slightly…
Business Tier members will have exclusive rights to use physical prints of this model for commercial purposes during their active membership. Note: Reselling of 3D model files is not allowed. Edit: Variations added due to comments and…
This project is a fully functional V8 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-8-4-3-6-5-7-2, Fully printable timing chain, Can be…
Original model “ The Mandalorian Blaster (Final Version) ” by Straekers_Armory you can find here: https://www.thingiverse.com/thing:3977528 If you’re a huge Star Wars fan then I’m sure you’ve already signed up for the new streaming…
This is hopefully the first of many more mods available for this design, The Pistol takes influence from modern-day firearms. I hope this is a welcomed addition to everyone's collection.
Perfect for: Collectors Keychain accessories Gifts for friends or firearm enthusiasts The design is carefully detailed to ensure high-quality prints even on basic 3D printers. Printing Settings Recommended layer height: 0.1–0.2 mm…
Get the other engines here ! Get the screwdriver here ! Build Video/Instruction Print the weights at a higher infill percentage to actually give them weight (I used 70-80% infill on the weights). This entire print is around 180g of…
Models can be printed upside down with NO supports! Print Settings Rafts: No Supports: No Resolution: .12 Infill: 15% Filament material: PLA
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! Also check out these new alternative cosmetic parts for this blaster and its variants here (pictured below)…
Pistachio bowl to separate shells Print settings 0,2mm layer 3 walls 25% infill no supports
The source marked this model as adult content.
This is another pistachio bowl I designed because none of the available models matched my aesthetic preferences or functional requirements. I can also be used for other nuts and snacks where you need space for any waste. I aimed for a…
Piston Cup, with several artistic changes. It is available in a single file, or in several parts, for an easy support-less print. The different files are organized in folders. If you use it and achieve a full make, please credit me and…
Hi Craig, This was all I had, hope it was what you were after, Cheers Jace https://en.wikipedia.org/wiki/TT\_pistol
this model is non functional but the trigger, slide and magwell still move.
Glue “Hand” and “Piston” Screw Hand and Base with 2 “Screw M8 x 25” Glue the "Plate" (mine is personalised) 2 version of the “Base” : Full Empty with “Hood” (10x2mm magnet) to hide object Update v2 : more tolerance for the screw
Leon S.Kennedy orignal pistol from the video game Resident Evil 4. This pistol is based on a real one the HK USP. I have used the dimension of this real pistol to make the model. If you want to 3d print it, I advise you to choose the…
Piston Cup Trophy - Inspired by the Disney / Pixar movies Cars
Foxbat is GIANT handcannon Nerf pistol, which uses Talon or Angled Talon half-dart magazines, loaded through the grip! Blaster Overview: Firing Demo: READ THE "Print Info" SECTION of this description page before printing the blaster!…
The Pistachio Cracker is an innovative tool designed to effortlessly remove pistachio shells without damaging your nails. This handy device is compact and user-friendly, featuring a sleek, ergonomic design that fits comfortably in your…
Wildstyle is a Nerf-style shotgun pistol that uses Silly Shells! Wildstyle is loaded one shell at a time, and it has a manual ejection lever that flings the shells out of the blaster. Firing Demo: Blaster Overview: Please refer to the…
Pistol model CZ 70, cal 7.65 Print the left and right parts, 7x connecting cylinders, then grip - it is advisable to add an outline around the grip to hold it on the printing bed. Attach the grip with screws WARNING! Use only as decoration!
This is my Tokarev TT-33 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. I made my example at 1:3 scale on my resin printer. You could scale it down for GI Joe…
Wedge to press disc brake caliper pistons back into the caliper body during service. Print two, use them in a pair. Insert from opposite sides of the caliper, push them together, then use the finger holes to remove them. Quick and easy,…
Scroll down for firing demo video ⬇ Please leave a like and rating and consider posting a make if you print and enjoy the project! The Zc Aus is a pocket-sized, high-powered, mag fed (5-13 dart capacity) foam dart (Nerf) spring-powered…
Tired of pistachio shells making a mess? This smart 2-in-1 container is the perfect solution. Designed with a clever dual-compartment system, it keeps your snacks and shells separate: the top holds pistachios, while the inner compartment…
Scroll down for firing demo video ⬇ Please leave a like and and consider posting a rating/make if you print and enjoy the project! These are alternative cosmetic parts for the Znc Aus, with a more aggressive, tactical design. This listing…
The RE-45 is a staple of the Frontier war, initial appearing in the hands of IMC soldiers as a effective suppressent for local dissent and providing cover fire for advances. Eventually it made it into the hands of Militia forces and again…
Needed a grip that was more vertical. This works. Print it upside down, minimal support need for grip cutout area. If someone is more capable than me, it needs some texture added. I printed with low resolution to simulate texture. It's…
The agent chamber (from the game valorant) pistol / sheriff / headhunter. Supports recommended This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this…
Here's my attempt at the MG6 Magnum Pistol from Halo. Just use the exploded image for assembly, you may need to sand the connection points so they fit. Here's the assembly and painting instructions…
This is a multi-part version of Chamber's Headhunter heavy pistol that I have split into the 3 component colours of the stock appearance: gold, black, and white. Print settings in image 0.15mm layer height (you can get away with 0.2mm)…
I have loaded a couple of different options here for you to determine how to best align it to how you want to print it. Print instructions Category: 3D Printing
Summary Easy-to-print and without supports printable buddy in the form of an engine piston. I hope you like it! Requires only 15g of filament! Print no supports! 0.2mm layer height or lower 15-20% infill Postprocessing Be careful when…
If you read this, please leave a ❤! An adapter I made to I can more easily reload my airsoft pistol mags. Printed in PETG. The short version sticks out less but requires a little extra finesse with gloves on. Edit 11/29/2023 V2:…
This project is a fully functional V6 engine model designed for 3D printing. It features: Moving crankshaft, pistons, timing chain, and two valves per cylinder, standard firing order: 1-2-3-4-5-6, Fully printable timing chain, Can be…
PIston 3D model, more files here: https://www.3dfindit.com/cad-bim-library?lang=en_US&path=dape%2Fengineering_technology&pk_campaign=PrusaPrinters&pk_kwd=prusaprinters
Piston Cup from Pixar Cars. Print Settings Printer: Overlord Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: Just print it laying on the bed Post-Printing ============= If you want all the entire cup joint the top and…
Go to https://www.patreon.com/lilykill to support the original creator. Materials selection: Handle - I recommend a wood-filled PLA, but not the Bamboo powder ones. They're too light. I used a walnut filled PLA to get a darker finish,…
Note: if your looking for a easy project then dont try start this model Welp i tried to make it more user friendly, but im still hearing complaints about making this model work so as a pre build warning; if you are not confident in your…
This hat is designed to look like Oklahoma State's Pistol Pete hat. The hat requires supports to get the correct shaping. Normally I prefer tree supports, but I would suggest on this one doing traditional supports. I originally attempted…
This project is currently in BETA (as of April '24) Specifically, the longevity and durability of the PLA+ printed locking pin needs to be further tested. UPDATE: A new experimental Reinforced Locking Pin has been added to the print…
Now your Dummy 13 can have a semi-functioning pistol instead of a boring old static model! Inspired by the moving pump shotgun concept of my previous model , I made a pistol for D13, but with a functioning slide that moves back and forth!…
A pistachio bowl to sort the shells
Description: Joy Con gun for shooter games. Printing: Layer height: 0.2 Supports: No Material: PLA, PETG, ABS Assembly: The connections between the parts can be glued or connected with M4 screws. The extension is not necessary and is only…
Printing Instructions Print without supports and at 100% infill. If using PrusaSlicer, I recommend disabling “Thick bridges” and enabling “Detect bridging perimeters”. If you have assembly issues with the holes being too small, you can…
Everithing is 0,3. only wheel is 0,10(not important) and screw is 0,20. When printing barrel use 60% infill for barrel and straight pattern. Barrel can bend on pressure. Added bolt with smaller radius to fit better.
Simple pistol-grip handle for use with iwata airbrushes (only tested on my HP-CR). This is based on https://www.thingiverse.com/thing:5220149 , but with some modified dimensions to allow for unscrewing the back cover without removing the…
I created a holster that fits a Glock 34 pistol that I use for all of my SWAT Dummies. I've included the pistol which has a red dot sight and a weapon light. *** UPDATE: I've included my entire drop holster collection here for you to…
Rust Eoka pistol replica. This was made with the obj. files from the game so should be perfectly accurate to the in game version. The Eoka pistols in the image where printed with wooden filament for the handles and normal grey PLA for the…
Remixed from the original pistachio opener on Thingiverse. I really loved using them, but wasn't sure what to do with my hands after cracking the shell open and trying to get the nut out with my fingers. Now the tweezers immediately grab…
Simple pistol model for weapon fans, You can like and download the model if you think it's cool.
I tried a few bowls, and decided to design my own. This one needs no supports. I printed this model in the pictures with PLA Linden (Prusament wood PLA) and the "fuzzy-skin" effect My print settings (bowl from image): Layer height: 0.20…
A sniper pistol grip for the that fits AR family (milspec dimensions airsoft or realsteel) Very ergonomic, with finger grooves, thumb rest, trigerfinger rest, and detachable palm shelf
This is a model I designed to be a gift for a 'Cars' enthusiast in the family :) Probably less than optimal but it was well-received.
A great desk decoration for any (car) mechanic! Perhaps a good gift idea for your favorite mechanic? I designed this trophy as a thank you gesture for a friend who helped me fix some engine problems that I had with my car. Required parts…
This is my 1911 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
* Inspired by this model . UPDATE-20 April, 2025 Version 2 released Changes The rims of the bowls will now always be flush with each other. What version to print? Are you going to coat your bowls with a food safe resin? No. Print v2-No…
Giant Lego pistol revolver (x10) Print two part and two join
Remix to fit my local brand airbrush. It's JAS 118x series like airbrush. I made it slightly bigger. Also made it snap-on. It's 11.5mm hole. To tight fit i heat it a bit with gas lighter. Supports needed. Orca slicer tree auto support…
🐻 Pistachio Bowl with Built-In Filter & Lid 🐻 A two-part pistachio bowl with easy-lock threads, a built-in honeycomb filter for debris, and an included lid for storage. Key Features: Two-Part Design: The bowl consists of two pieces that…
The title says it all. A stand, made to fit the sizing of a Glock 17 Gen 5.
Cubic / Grid infil - 10% Wall loops 4 Surface pattern - monotonic lines Layer heigh - 0.2
S.I.M.P. is a fully 3d printable Half Dart stringer pistol with an internal magazine that requires no extra hardware other than the elastic string. This Blasters fps will depend on the elastic put in it but it should have the fps as a…
I broke my crossbow bolt. The metal tip was still good so I made this replacement arrow body. Print instructions Print as it is. I used PLA. Use a support enforcer in the part where the metal tip goes. Print it strong so use high…
Micro Reverse Compound Crossbow Really fun for shooting on a magnetic dart plate. The parts are printed in PLA and PETG at 0.2mm layer height. Additional Hardware: 2 mm wire (I used a 2mm stainless steel tig welding rod) magnet D:6mm…
My own take on a pistachio bowl. Designed to fit a 250g pack.
The boys are getting excited for Halloween so I'm getting constant requests for the Scar next. Will see ; ) It will fit on a 200 x 200 bed and its perfect for my 10 year old but it could do with being bigger to accomidate the finger going…
I've messed around with a new cad/modelling software and just ended up with a pistol somehow… Hardware needed: A bit of 4mm bungee and maybe some tape for the bungee where it interfaces with the lever to avoid too much flex Assembly, put…
Shimano technical training has a process for cleaning the pistons on the disc brake calipers which relies on cutting down a bleed block (such as this design is based upon) to make a piston exposure tool. Having to hack apart a bleed block…
Pistol Hand plus the other hands postures models make Lucky 13 very expressive. I printed it in PLA, 0.15 layer height, no supports and instead of setting 100% infill I setup walls thickness enough to fill the inside with a nice pattern.…
A hydraulic piston looking abdomen armor for Dummy 13. This is a hard print, it'll probably not work on 100%-150% builds, and will need supports. The looks are worth it, though.
I wanted a little more detail in the Lucky 13 pistol that was still easy to print without supports. ***UPDATE 06/13/2022*** Tweaked the serrations and depth of the groove separating the slide and body. I used a 0.4mm nozzle and PrintBed…
This is a simple pistol holder. I tested it with a Tokyo Marui Glock, a CZ P09 from ASG, a ICS BLE Alpha and a HK 45 Tokyo Marui. Do not use it with a High capa. I'll post another version later. Do not hesitate to list other compatible…
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice Hardware requirement: #4 x 0.375in Thread-Forming Flat Head Screw, QTY 9 Two sections of 4mm elastic string Talon Magazine spring Secure the Magholder with one #4…
takes a 1/4 in rod will need glue. Category: Props
Display Stand for all CZ 9mm Pistols (Shadow Series, TS, CZ75 and Polymer) Version with Logo for Compact Pistols (might also work with full size) Version with longer foot for Full Size Pistols Printed in PETG or PLA 0,2mm layer height 3…
easy to print highly detailed I hope you enjoy printing and would be very happy about a like and a make.
Edited 10/5/24: QUEST 3 VERSION AVAILABLE Cool new Features! Made this grip Quest 3/Quest 3S compatible (Grip LED, Geometry Changes) Added a belt hanger assembly Added a knuckle strap battery door Added a knuckle strap Backwards…
These bolts work okay for target practice, although not with the best accuracy. Assuming normal target blocks are used, the tips should be fairly durable and last a while. They do not require any supports but do need a 10 mm wide brim as…
Here's my attempt at a laser pistol from Fallout. I scaled it up to 200%. You might want to sand the connection points so they fit if your tolerances aren't perfect. Here’s my assembly and painting video for this…
Print .1, 100 percent infill, full supports
Disclaimer: Please obey your countrys law regarding silencers. Fits .177 (4.5mm) and .22 (5.5mm) caliber airguns It might be tricky to get the threads right, if you have a threaded tap, use it :D
This minimalist pistachio bowl with two compartments looks stylish and is easy to print. It's ideal for pistachios and their shells, but also for other snacks. The default dimensions are 186 mm x 164 mm x 73 mm (scalable). Printed with…
This is a remix of the original 3-part rubber band pistol by Plastic Flow. It is an easy and fast print with a lot of fun when printed! This version consists of 4 parts, but only 3 are still required if you only want a rubber band pistol;…
The 10mm pistol is my favourite pistol in Fallout 4. It looks very interesting, so I've modeled it :)
Pistachio Bowl with Locking Bottom A convenient pistachio bowl designed with a locking bottom compartment for collecting and disposing of pistachio shells. Enjoy your pistachios while keeping the shells neatly contained for easy cleanup.…
A set of spacers designed to advance a single piston or two pistons on the same side of the caliper. There is a left and a right side spacer that advance a single piston in the case of a sticky piston or to clean each piston. There are 4…
Modeled this to fit the SBA3 Pistol Brace. This is intended to be used for storage and display only as having this installed in your pistol brace while in use may constitute modifying your brace to be a stock. I would recommend using a…
I was commissioned a Glock 17 magazine wall hanger so my customer could hang their magazines onto the wall instead of laying them flat on a shelf all the time. I made a 1 / 3 / 5 version so that people that have either more of less mags…
Introducing my meticulously designed 3D model holster crafted specifically for the Ruger Mark 4 22/45 Tactical with a 4.4" barrel . Precision-engineered, the holster is molded to perfectly fit the contours of the Ruger Mark 4 22/45…
Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…
This is a BETA release of the Dan Pistol by Orion Blasters. Posted with permission by https://orionblasters.com. Hardware kits available here: https://outofdarts.com/products/orion-blasters-dan-pistol-hardware-kit 3MF for Bambu Slicer is…
Service tool for Shimano 4 piston disk brake calipers (SLX, XT, XTR, ZEE, SAINT, ...). Perfect to loosen a stuck piston.
