Counting matching models…
This model is designed for a Troldtekt 25mm panel that helps you to get the perfect distance from the corner and out
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
Minor Update: A half-single half-regular tray was made and a version of the lid with a lip was added for easier removal! *** Minor Update: Design has been tested with both square and circle drills now, both seem to work fine :) *** Here…
I needed a way to consistently place magnets with the correct orientation, so I modeled these to place magnets. Parts required (for the STL's) : 2 6mm x 2.7mm magnets 2 30mm x 4mm springs 2 M3 x 40mm bolts Spring kit that I used:…
Welcome OpenPnP Community to the PixiePlacer Wiki! The PixiePlacer is a DIY Pick and Place Machine for SMD Components based around the amazing software OpenPnP. The machine is designed to be low cost and suited towards mid-scale…
Correctly aligned feeder slot components make life a joy! See how , in under 5 minutes. Quit fighting to align each of the 15 parts correctly. For only $0 (or 24 easy payments of $0/month), download this alignment tool. Who needs slicing,…
The Magnet Placer (Parametric) model by erick.siders is excellent but I made some tweaks and was asked to upload a remix so here it is. My changes include: 1) Increased the clearance to 0.2mm and updated the top/bottom cap to tube…
Add this to your PandaPlacer A1 next to the up camera, and get full dual-level calibration abilities within OpenPnP. Follow the OpenPnP Issues & Solutions for the best possible calibration. Photo print a set of squares. Example file…
Screw Template for Troldtekt Panels – Quick and Uniform Installation Make installing Troldtekt acoustic panels easier and neater with this smart screw template . It helps you place screws quickly and precisely – the same way every time –…
This is designed to be used with Catan tile pieces for 2 cylindrical magnets. http://www.thingiverse.com/thing:2093075 The newer 3 mm cylindrical magnets I bought were a slightly tighter squeeze. I could no longer push them easily by…
A fuse puller/placer for 5x20 mm and 6x30 mm fuses (glass/ceramic). Model The tolerances have been tight enough that the fuses snaps into position. Printing I have printed these in Prusa PETG-CF (Carbon Fiber) with hight strength in mind.…
i broke my glass, never use water, prefer lower profile
large dicynodont from Triassic North America.
My attempt to create a Desplacer Beast for RPGs. You may need to resize this model to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with…
Denne mærkat monteres direkte på luftventilen for at angive dækkets placering, f.eks. venstre forhjul (VF) eller højre baghjul (HB).
A really simple tool to help us place the magnet at the right Orientation. The idea is to use a weak magnet embedded in this tool… just enough to hold it and identify the pole of the magnet, easy enough to slide off the target magnet. I…
to bring the stones into the starting position
Holds the reset button for the Pandaplacer
FreeCAD source included. Installation is simple: slide the fan inside, with the wire oriented toward the cut slide the shroud over the motor You'll have to use the 24v/gnd from the stepper stick pins on the back of the PCB. (lower right…
This tool help to attach protection glass in perfect position to the phone. This tool is more precision than stickers supplied with glass. Large body for excelent stability. For fastening phone in holder are used sliders and tool body.…
You can slide in a plexi cover. Also you can add a fan.
Use this to replace your existing ELKO wall switch panel with a Aqara switch. Removable and easy access to original switches if necessary. Use 8 (8x2mm) magnets. A note on support: The 'Wallplate' needs a fair bit of support. To make it…
Custom Trolley Coin Replacer
i made this for those who wanted a stock instead of a hammer on the SP-L nerf Fortnite pistol, can use any stock in the
Design is created for 50 Bani RON. But it shall work also for 1 Euro.
Holds the airtube for the pandaplacer in the middle of the pandaplacer frame. Needs two 2020 profiles that are hold in place using the included cornerbrackets. The tube is held in place using two rubber bands.
This is a very simple print that helps setting lids on planters properly in my hydroponics towers. I provide several objects for 20,30,40,50 cm planters, but you can edit the document and adjust it to your particular needs. Check readme…
A stop for the FFC so that it does not get stuck in the support profile on the left of the Pandaplacer. Insert in the end of the support profile and fixate it with a screw and nut.
Two handy little tools that allows you to be sure each time you place a magnet that the part won't be repelled by the body. Printing instructions : Choose another color for the text at the bottom if you have a printer that handles that.…
the X4 can't be set on the back of an iPhone 17 Pro since the camera and the magsafe are closer than in the 17 Pro Max with this plate and the two metal rings that come with the X4, you can have it along with the phone, although it will…
replaces the advertisement from licensplate with a black bar Category: Other
Es una colocar para chiles embazados ya sea pequeños o granes
put ink in the placer and then use sponge to put on two pieces of paper on the bed
A fuse puller/placer for 5x20 mm and 6x30 mm fuses (glass/ceramic). Model The tolerances have been tight enough that the fuses snaps into position. Printing I have printed these in Prusa PETG-CF (Carbon Fiber) with hight strength in mind.…
replaces the advertisement from licensplate with a black bar Category: Other
