Counting matching models…
one Foot is as big as the printbed from the MK3S so you can only print one at a time It is not a perfekt fit but close enough and does the job gerat I printed them with a 0.6mm Nozzle with 0.2 mm layerhight and 4 outer shells. hope you…
Solid D-pads, due to their geometry, incorrectly register diagonal inputs if a cardinal direction is pressed too hard. Split D-pads solve this by having a separate pieces for each directional button, which eliminates cross-button…
Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…
Hey guys, i design my own PS4 500gb under desk Holder! I post here left side!
Hey guys, i design my own PS4 500gb under desk Holder! I post here left side!
Similar to the Xbox Series X|S stand I did, this this the Playstation 5 dualsense controller stand. The controller fits perfect onto the stand and will not slide out. If you have any issues or questions please feel free to reach out to me…
This is a remix for 4 Controllers and a logo
The hammer is not functional it is theater prop, I made it lightweight with exaggerated hammer head to make it more noticeable on stage. There is no any logos on the hammer. Model has two separate parts (the head and the handle) you can…
you can scale it to your liking :) leave a like and a download if you like it :D hehe
3D-Designed and Printed PlayStation 4 Controller Stand This custom-designed PlayStation 4 controller stand offers a sleek and practical way to display your controllers. Crafted with simplicity in mind, it was designed and 3D-printed to…
This custom cover is made specifically for the Type-C PD and HDMI mods to perfectly fit the PS2 Fat model (tested on the 5xxx series). 🛠 Key Features : Designed for this PD trigger : AliExpress PD trigger . Made for this HDMI mod :…
Solid D-pads, due to their geometry, incorrectly register diagonal inputs if a cardinal direction is pressed too hard. Split D-pads solve this by having a separate pieces for each directional button, which eliminates cross-button…
Hello, Welcome to my profile, full of models and miniatures :-) I have a Playstation Headphone Holder for you and any other. The logo is practically authentic. My Model is made especially for Playstation Headphones PS Gold / Platinum I…
I am currently testing this for making custom plugs for ps1/ps2 controllers for use with https://github.com/Micha213/Blu , I will add further instructions once I've found fitting pins. Update: It looks like 1.3mm brass rods are a good…
inspired by SCUF Thumbstick grips and designed to fit controllers for Xbox One, Xbox Series, Playstation 5, and Nintendo Switch Pro Controller (not joycons) No glue is required, but it is recommended Print cap in TPU Support only for…
Use VHB tape or similar double-sided adhesive (hi-temp hot glue probably work fine) to bind to the halo. 3M VHB tape is a pressure-activated glue/tape hybrid that can still be removed if needed. Superglue fails to adhere to the…
Bring a fierce reptilian presence to your collection with this 3D printable STL model of a Lizard Warrior. This formidable combatant is perfect for adding a powerful and unique element to your fantasy displays, tabletop gaming, or…
This is a very quick remix !! Topology isnt ideal, please DM me if theres any problem
Logitech RS shifter bracket for Playseat Challenge
This wallmount is for standard Playstation 1 and 2. See my design list for wallmounts for other controllers Cable area behind the controller. You can either wrap the cable around the holder, or use a cable tie and just insert the bundle…
I made a Moza HGP shifter adapter for the Playseat Challenge Universal Mount. There is an angle adjuster so you can make it parallel to the floor. 1) Print as oriented in model 2) Use 4x bolts, nuts and washers around perimeter. This…
This Dobble Arduino LCD Box/Case is a compact enclosure for Arduino projects with 16x2 LCD screens. It helps keep your display and electronics protected and neatly organized. Dimensions: Length: 18.5 cm Width: 2.8 cm Height: 3.9 cm The…
These are stands for displaying Technology cards in the board game Voidfall. They are designed to improve card visibility and reduce the footprint of the game on the table. The Technology Tableau displays up to twelve different Technology…
I created some Displays for my Sony Lenses they have holes to put magnets inside so they stay perfectly together
My version of a hinge suitable for Makedo and similar sets, making playtime with cardboard come to life. Add a door to your house, or a bonnet on your car. Printed in PLA, 0.2mm, no supports needed. Print in place hinge is reasonably…
Flat adapter for displays 2 go iPad stand. This can be glued onto a different iPad case or attached to any different mount.
Hello, Today I have a Playstation 3 for you, a PS3 controller holder . The controller fits perfectly into the stand. They will beautify any video game collection. Good luck with the printing! I used PLA/PETG as the material. You need to…
Bracket i designed to vertical fit my MOZA HBP E-Brake to my Playseta Challenge
screen can be bought here: https://getcartablet.com/products/pro-max-1 cheaper here, but not sure if its the exact same model: https://nl.aliexpress.com/item/1005006744171534.html how to remove the airco grill: (stick the butter knife…
Hello, Today I have a Playstation 3 slim vertical stand for you. The PS3 holds up beautifully and is not in danger of falling. The console is well balanced and the stand does not interfere with its process. The stand also helps with…
I needed a holder for the electronics compartment of my simmson pedal set. As the wires are very short it had to be on the end of the pedal holder. The 2 parts are holt together with 4 M3 screws and nuts. Some holes included, also added…
I used PETG. I printed them with a 0.2 layer height and 0.4 wall thickness, making four perimeters. I printed them without a skirt or border. They will also fit other cockpits with a 42mm tube thickness.
About this item Holds 21 Flowers with a Perfectly Balanced Layout: This 3D printed puzzle vase accommodates up to 21 flower stems across 21 precisely placed holes arranged in concentric circles. The thoughtful layout ensures each flower…
A simple Parking Garage playset model for use with toy cars.
A minimalist display stand inspired by PlayStation gaming controller button symbols. Can be printed with or without the base. The model is split into 3 separate parts for easy printing: • Triangle + Cross (1 piece) • Circle + Square (1…
disinfo! (it dis plays info rmation) is my pet project for last couple of years. Its main purpose is to display at-a-glance information throughout the day. I have been developing the software and hardware as a fully open-source project --…
I love Matt-G's design, but the thin "hook" on the right side was a problem. As you can see in the attached pic, it failed to print at low resolution. So I opened the .step file in FreeCAD and beefed it up. Now it works GREAT! This remix…
BlueRetro made using an ESP32. Assembled with 4 3x12mm machine screws. ESP32 model used: ELEGOO 3PCS ESP-32 Development Board USB-C, 2.4GHz Dual Mode WiFi+Bluetooth 4.2 Dual Core Microcontroller Support AP/STA/AP+STA, CP2102 Chip Amazon…
Usually the Moza wheel bases must be mounted on the very front or back of the Playseat Trophy. If you mount it in the middle, there's only holes for 2 of the 4 bolts. This is just an angle adapter so you can mount 4 points. Hardware: - 4x…
I made these to lift the rear by 70mm (2 3/4 inches). Just one held my weight of 81kg (179 lbs), but print 2 or 3. It's a long, but low-risk print. Add some foam tape or similar to the bottom if you're worried about scuffing floors. The…
Designed an other PS4 Slim under desk mount, and as because my table is tilted, I made stoppers, so the playstation cant slide out neither to the front, and backwards too (if you plug in an USB cable, or so) ... I made a room in the top…
Cool PS4 ™ Slim vertical stand the photo is different from the actual model btw lol Beware of the extra support for the bottom since it cant be 3d printed in the air
A simple, yet curvy, dualshock stand. Includes a slot to route a charging cable. Printed mine in pistachio PETG with 2 perimeters and 25 % gyroid infill, but as its overbuilt it can be made with practically any material and reasonable…
With this mod you will not be able to use pivot joint to open up the frame , you will need step over into the seat. I suggest you print it at a slant, like on screenshot. Also, use most creep-resistant material you have. More perimeters…
Hello, I have a Playstation 5 holder for 2 controllers for you. The holder is attached to the side of the Playstation 5 fat/slim. It works absolutely great. The controllers fit nicely into the stand. Good luck with the printing! I used…
if you're using bambulab printers it is highly recommended to use the supertack build plate-(or something similar if you're not) the magnets should just press in and should also stay in the buttons most of the time when removing them from…
There was no mount for a PXN SF U Shifter to a Logitech Challenge X and the existing one for the Moza shifter has been done in crappy STL format which is totally against the community-centered 3D-printing idea, so I remade everything from…
Robust mount with a shorter cantilever for higher strength and stiffness
I do not have a multi color printer yet but wanted the xbox logo to be multi color. I took the original xbox logo portion, put a "fill" under it to raise it up, and then put pauses in the print so that the face is white, inner portion is…
I shortened the fixation part to accomodate stiffening mods of the playseat challenge with it Here are the mods I am talking about: Brace https://www.thingiverse.com/thing:4944013 Joint Stiffening https://www.thingiverse.com/thing:2772442…
Level up your setup with this PlayStation-inspired gaming coaster . Designed to protect your desk from water marks while matching perfectly with a console gamer aesthetic . Clean, iconic, and functional.
This model was inspired by the design of DonKeulito . I needed to re-design the model as my angle of the tube it attaches to did have a different angle and I needed it for a different handbrake and shifter. The chair can still be folded…
Add a bit of color to your PlayStation PS5 logo with this quick and simple logo insert accessory. Quick 4 min print! Instructions: - Print in 0.2mm layer height or lower for best results, it is 0.4mm thick. - Print out in your desired…
Update to the latest version of this model. Someone asked if there was a way to make this without having to take the tubular frame apart. I've made a new version with a hook instead of a full circle. Material: PLA works Resolution:…
Single part case for 12864 MKS Mini Displays (2 options) Remix of the great design "LCD MKS Mini 12864 Mount Enclosure Box Caja" by Campy, available here : https://www.thingiverse.com/thing:2915718 BOM : 4 x M3x8 Original MakerBase Mini…
The playseat challenge comes with two plastic clamps to mount the pedal mount to the chair frame but still allow it to fold. One of mine broke - so this is a replacement. Uses M6 bolts - but still allows the chair to fold away. I printed…
This is remixed from Gord Allott's PS Portal stand with influences from DukeFenix's remix with the added charging port. Great designs, but I would prefer a less bulky appearance at the front. So the front profile was redesigned to give it…
Our PlayStation Headset Holder combines practicality with gaming style. Crafted with the iconic PlayStation symbols and an innovative adjustable design, this holder provides a convenient storage solution for your gaming headset. The…
Here is a range of cases to enclose a 2.4", 2.8" or 4.3" Nextion screen for the Gaggiuino project. The case mounts magnetically to the front of the Gaggia Classic using 2 (or 4 if you want to be really secure) 60x10x3mm Neodymium magnets.…
It needs two screws with a cross section of 5 mm and a body diameter of 2.5 mm Update: New model (v2) added with less filament consumption. In the new model, the triggers do not hit the wall and there is also a space to attach a bumper so…
These displays are weird dimensions to frame, so I decided to 3D print a stand for it. Your display will slide in and there's a slot for the hardware attached to the middle of the left side of the display. There's a small attachment at…
@novaflash_385438 made a great model, but I missed screw holes so I added two ;) Two 4x30mm wood screws are required.
Removes strain from microUSB port and connector from Sony PlayStation DualShock 4 Controller. What have I changed from the original? I have added a locking cap to the very good model from user: creamywhite so that the cable cannot be…
This 3D model serves as a housing for a device that plays sounds when a person is present in room - see the following YouTube video for details:
A bracket that hangs on the PS5 and holds the Pulse3D wireless headset and DualSense Controller
PlayStation 4/5 Resident Evil Spieleständer, Vitrinenschuber MMU und Single Version Hallo, bei dem folgenden Modell handelt es sich um einen Spieleständer im Resident Evil Design. In dem Spieleständer finden bis zu 10 PS4 oder PS5 Spiele…
Keep your USB-C cables organized and tangle-free with these 3D-printed cable ties featuring the iconic PlayStation symbols (circle, cross, triangle, and square). These cable ties are not only practical but also add a touch of gaming style…
Inspiration came from https://www.printables.com/model/525141-moza-srp-to-playseat-challenge-adapter. But its a fundametally more comprehensive build and mine is for the Challenge X where as the linked project is not. Some notes: I have…
Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…
Hi. As they say, necessity is the mother of invention. That's why I designed my own version of wall mount for ps2 slim. As for the project itself. Let's say it's in development If I find that something is missing or wrong, I will make…
It's a memory card holder, compatible with MC for psx and ps2. Category: Tool Holders & Boxes
Joystick und Displayschutz für den DJI Mavic 2 Controller mit breiteren "Daumenknüppel". Hier der Link zu den "Daumenknüppeln": https://www.amazon.de/dp/B07HFZH85W/ref=cm_sw_em_r_mt_dp_U_eISuEbX0FJ2WJ…
Got tired of having my wheel power supply ziptied under the pedal tray. I used slightly longer bolts with washers I had lying around to mount it. Probably a good idea to slice around the holes in the slicer and change infill to a higher…
it's time to decorate your studio, your room, your home with a Playstation (PSX) shell I remodelled to perfection a real Playstation cover from the 90s You decide whether you want to print it in several colours or with a single colour and…
This is a PlayStation Logo that can be printed out of almost anything you want. The pieces are available in separate files to print separately, but you could print them all at once. It would be cool to see them printed in a glow in the…
This is a version of my last PlayStation Logo. This time the letters are stacked and are thicker to help them stand up. There are files to print the buttons individually, and a file for printing it together. It is available with a…
This is a simple bracket used to mount an Arduino Nano or Pro Mini in the empty space inside a PlayStation console. Place the bracket under the screw that is on the right side of the controller ports. Featured in the following video:
The retro connection was inspired by the first PlayStation and presented as part of the PlayStation 5 collector's box in honor of its 30th anniversary. I wasn't able to purchase a device but at least I have this fun cable. I created two…
I wanted to mount the Processing Unit (PU) on the wall near the ceiling, so I could run the headset cables across the ceiling and down. I started by mounting the PU to the wall with 3M Command Strips, but I knew I would want to take the…
Made with petg, infill about 30-40, needs to withstand some tension 180/185 long
I needed a relatively simple way to store and charge my controllers. There are 2 rails that can be mounted with adhesive strips or screws. I have included dowels in these models as my goal was a completely toolless, supportless design. If…
Hey guys, i design my own PS4 500gb under desk Holder! I post here left side!
Hey guys, i design my own PS4 500gb under desk Holder! I post here left side!
Hola! Os comparto este organizador para guardar las memory card de la playstation 1, creo que para la 2 tambien sirve que es el mismo tamaño de memoria. El logo lo he pintado a mano. 0.2mm capa 15%relleno Un saludo!
Ein passgenauer Knopf für die PSP mit rauer Oberflächef.
Four display pieces that can be mounted to walls for cards like Pokémon, Yu-Gi-Oh, Magic, Or just photos! I show pokemon on mine. Attached is a photo of how I have used them! Sorry for not having it even, I am printing the other 2 I need…
For 12 games. Stable stand, easy to print. !!! For 15mm wide cover / Cardboard - 17mm wide cover. !!!
The design is off centered for the PS5 to sit in-betwee the emptyspace of the foot and the wall (assuming you have a standard size table).
Railcar Puzzle Electric Car Playset Crossover Piece Category: Puzzles
Hi all I designed a Holder for my PlayStation 5 Headphones, the Holder fits mid-panel & will keep the Headset level, I also designed the distance to be just right so the headphones don’t permanently rest on the side panel. There are no…
![[Finished] MOZA SRP Pedals to Playseat Challenge Adapters](https://media.printables.com/media/prints/9cb366b1-a5cf-4e2b-976a-76f1529d70c1/images/10560577_f6aef318-29c6-4df2-97c9-ed8996be6cf9_bfb0dcb9-3225-44dc-af0b-2df382649461/2025-08-29-17_41_21-playseat-challenge-clamps-_-assem.jpg)
