Counting matching models…
Small air tank for pneumatic Lego Technic. When slicing, don't forget to disable supports on the inside of the air tank :) I recommend to coat the print with either spray paint or epoxy to ensure, that air does not leak from the…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for one variant
[EN] In addition to its primary purpose, this coin can also serve as a quick sample print for 3D printing demonstrations. For this use, the model includes a text field in which to write your own short text. For example, the name of the…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
PL: 🪴 Modularny palik do mchu dla roślin pnących 📖 Opis ogólny Ten kompletny zestaw modułów palika do mchu został zaprojektowany z myślą o wspieraniu i przyspieszeniu wzrostu pnączy roślin typu Monstera , Scindapsus , Epipremnum ,…
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Token to shoping cart token. From pla works well. Size can be easily change in slicer.
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
(USE THE PRINT FILES; MODEL FILE SIZES ARE INACCURATE) Made this model for a 3D Modeling class. Used for cosplay.
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
Pour faciliter la construction de https://www.printables.com/fr/model/417978-fusee-hydropneumatique, améliorer ses performances et le taux de fiabilité, quelques modifications. - Allégement de la coiffe 66g → 40g - Impression du ressort…
Print approx. €0.79–€0.97 excl. taxPreliminary estimate for PETGSource material: PET
Voir le remix ; https://www.printables.com/fr/model/425105-fusee-a-eau-hydropneumatiquewater-rocket La fabrication et le lancement de fusées à eau est une activité facile et peu onéreuse . J'utilisais, jadis, exclusivement des bouteilles…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Durchführungen für Trockenbox an die M6 Pneumatikanschlüsse geschraubt werden können.
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Rozměr 18x16x1.5cm + 2x5.5mm otvor pro montáž.
Print approx. €3.47–€4.24 excl. taxPreliminary estimate for PETGSource material: PET
I have 3 old PNY magnet support and each one broke off at the clamp. I designed a snap-on adaptator for my car where the magnet part with the ball joint and the screw can be placed. Printed with PETG and 0,3mm layer with organic supports.…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for PETGSource material: PET
Enhance your workspace organization with this meticulously designed surge protector mount. Tailored for the SPN7080 series, this mount offers a seamless solution to keep your power strip securely fastened under your desk, ensuring a…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
This model is a simple bracket for the ASUS Mini PC PN41 for the MP-1 module system. https://www.musicstore.de/de_DE/EUR/DAP-2-HE-Rackblende-f-Modulsystem-10-Segmente-MP-1/art-PAH0017160-000 I use the Mini PC as a home assistant host and…
Print approx. €8.16–€9.97 excl. taxPreliminary estimate for one variant
Dieses Cover ermöglicht es einen M6 Pneumatik Anschluss direkt an den Bondtechextruder anzuschließen. Damit ist das Filament, das aus der Trockenbox kommt nie an der Luft während des Drucks. Für die MMU ist auch so ein Anschluss…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for PETGSource material: PET
PETG 0.2 / nozzle 0.4
Print approx. €3.73–€4.56 excl. taxPreliminary estimate for PETGSource material: PET
tvorba záložek jako propagačních předmětů knihovny
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Stylish Topnik bottle holder, the ultimate solution to keep your flux secure and spill-free. Slim design with flat base to save space and fast print. Perfectly sized a for 50 ml bottle (42×23 mm), it features two bumps for a snug fit.…
Print approx. €0.35–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
This is one of three winning designs in Joel Telling's filament shelving system spool holder contest . A filament holder that just hangs from the front 1x2 will cause it to twist and warp over time and will not be very sturdy. My intent…
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
Spare transparent label for beer taps. Print with Transparent PLA 100% infill Support me "If you dig what I'm creating and want to support the journey, consider fueling my creativity with a virtual coffee! Your support goes a long way in…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
My Vilfo VPN router ran a bit hot so I created a new ventilated lid for it (https://www.prusaprinters.org/prints/64292-ventilated-lid-for-vilfo-vpn-router) This is a new version of that lid with a 60mm fan mount. Print Settings Printer:…
Print approx. €3.16–€3.87 excl. taxPreliminary estimate for one variant
Use PLA. 3pcs horisontal walls.
Print approx. €4.24–€5.19 excl. taxPreliminary estimate for one variant
I have used as low as 30% infill, and standard PLA. Seems to be plenty strong enough, even after upgrading to an 18V battery system. Working on a dualie version, super slim adapter, as well as one that reverses the position of the hub.…
Print approx. €18.55–€22.67 excl. taxPreliminary estimate for one variant
Studenti si namyslí a naskicují návrh všech dílů kolečka. Ty pak vymodelují v programu TinkerCad.
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
Žáci si navrhnou, vymodelují, upraví a vytisknou originální knoflík, který si pak přišijí na vlastnoručně vyrobenou tašku jako funkční součást nebo ozdobu.
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Update 23rd November v2.1 Added an additional model suitable for 6x2mm magnets. Update 14th November v2.1 Added an additional model suitable for 5x2mm magnets. Update 13th November v2.1 Added an additional model suitable for 6x3mm…
A hypnotic fidget toy as seen on @lucythemaker's tiktok . Concentric squares that look cool when you move it around your desk For commercial licensing - check out lucythemaker's thangs membership https://thangs.com/designer/lucythemaker…
A hypnotic fidget toy as seen on @lucythemaker's tiktok . Concentric stars that look cool when you move it around your desk For commercial licensing - check out lucythemaker's thangs membership https://thangs.com/designer/lucythemaker…
Easy to print, easy to use. Always ready. Prepared EU tokens with many logos - car brands, PrusaSlicer and Printables logo, animal themes and other symbols, but almost any logo can be used by modifying a empty one. Now available update…
****NEW IMPROVED VERSION 2**** The model V2 no longer needs an elastic band to hold the bag in place over the open end of the scoop, the clips now do this job. As a bonus, supports are not needed when printing this version. Cat litter…
Update 10/27/22: Some user has asked me for a version to fix on the machine and here you have it to test. Attached is a "beta" version of the divider to fix in the corner of the machine with double-sided tape. I emphasize beta. It would…
Keep your pneumatic tools organized and always within reach! This wall-mounted holder is designed for air compressor tools such as impact wrenches, air ratchets, blow guns, tire inflators and die grinders. The holder keeps your workshop…
Cat litter scoop and bagging in one! Put the bag over the open end of the scoop, sift out the good litter, tip the scoop up and the bad stuff goes straight in the bag, continue scooping until you’re done. This scoop has an ergonomic…
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
*** UPDATED JUNE 2024 *** Version 2 (squared) is available and is being maintained here. https://makerworld.com/fr/models/374953#profileId-398255 *** UPDATED - March 2024: Japanese and UK version added as suggested in comments/chats. ***…
Device for 45-degree chamfering of plasterboards in drywall. Small and convenient to useAll trapezoidal blades up to 62mm fit. Chamfer width +- 6mm. The nut works easily after the first screwing in. In the slicer, the model must be…
A more simple Y-Splitter for the Bambu Lab AMS PTFE connection.
I was fascinated by the Hypnotic Extruder Visualizer by Clement and decided to remix all three styles to fit my Ender 3 S1 Pro. Special thanks to Lasse Lausen for their remix of the same project that helped me get the right sizing to…
.STEP model of the pneumatic fitting commonly on Creality hotends with bowden tubes. For use in CAD, not for printing. https://thangs.com/mythangs/file/605391
Jednoduchá plastová náhrada za mince 10 nebo 5Kč, resp. 1 Euro do nákupních košíků. Vytištěno z PLA (žlutý), ABS (šedivý) a HIPS (černý)
The output is tangential to the coil which allows the filament to unwind much more naturally than with the original output. It is necessary to glue the part with a heat resistant double sided adhesive, this avoids screwing the part and…
Žeton do nákupního košíku. Při tisku z PLA v době pandemie dobře poslouží jako žeton na jedno použití do nákupního košíku, který po použití vyhodíte bez obav o životní prostředí. V případě opakovaného použití nezapomeňte desinfikovat v…
Klasická prusa matka s přidaným textem. Doufám, že vaše matka má taky smysl pro humor :D Na obrázku je vytištěná 150% velikost
A hypnotic fidget toy as seen on @lucythemaker's tiktok . Concentric triangles that look cool when you move it around your desk For commercial licensing - check out lucythemaker's thangs membership https://thangs.com/designer/lucythemaker…
This a drop-in replacement part for the K1 extruder cover. It's compatible with all versions of the extruder (V1, V2, V3). I have made this cover because I wanted to be able to upgrade the extruder V1 and V2 with the most interesting…
I recently added a Micro Swiss NG to my Ender 3 V2. I am going a reverse bowden route, with the eventual goal of printing some more hydroscopic filaments. So i purchased a Sunlu S2 filament dryer and used my long Capricorn tube to feed…
Lock clip for PC4 fittings and ptfe tube connectors
I re-made JBE's remix of the original connector by Phil-ip with the following improvements: Regenerated from original model without using re-meshing, avoiding geometry noise. Added internal taper to lower part of M10 thread, eliminating…
Lego compatible air tank
Herewith i want to share my design of a RC boat motor mount. The motor mount is designed to mount a Graupner Bushless Speed 600 BB motor but can be used for numerous types of brushless and brushed motors with a mounting diameter of 25mm.…
Hypnotoad compels you to like, download and post a make of this model. Hypnotoad wants to take over the world and needs you to print his army! My blender sculpture of the Hypnotoad from futurama. notes: Included in the files are 4…
Wanted a simpler version of the Hypnotic Extruder Visualizer, that fittet the Ender 3 S1 Sprite Extruder. It's two parts that i printed in PETG with 0.2mm layer height. They are made to pressfit onto the extruder stepper motor axle, and…
Je to můj první modlel, tak prosím o schovívavost :D Jedna verze je s dírama, druhá bez. Tiskl jsem to na PRUSA MK3S+ a MINI+. Z matného černého PET-G. Pokud máte funkční, správně seřízenou tiskárnu, tak se vám ani moc nezbortí převisy :D…
A box to contain a pn532 rfid module. No arduino on this one because I'm connecting it directly to my pc (via an usb<->serial adapter). Communication is done trough the libnfc library under Linux Debian (…
This is a remix from the Y-Splitter for Bambu Lab X1. add 10mm Brim no Support needed print with ABS or PETG the O-ring of the fittings must be removed…
Nescafé Dolce Gusto adaptér na odvápnění. Pokud ztratíte originální adaptér na odvápňovávání svého kávoru, tak si můžete vytisknout tento. Nescafé Dolce Gusto descaling adapter. If you lose the original descaling adapter for your coffee…
Small case for the elechouse PN532 NFC RFID Module v3 . Based off of but not remixed from aix150's design . Mine is for a lock, which is why I created the original with a lock design on the lid. The base also has an inset portion for the…
Tried to find a 10 inch rack mount Mini-ITX computer case for my PFsense build. But coudn't find one on the market in the EU or here on thingiverse. So I designed my own. Features: 2U 10 inch rack mountable Fits a Mini-ITX motherboard 1…
This is a work-around for those Creality K2 Plus owners who experience a failure in their extruder's PTFE tube's Pneumatic connector such that it stops holding your PTFE tube. You can use this with an M10 Pneumatic connector that will…
This design belongs to this dry box concept ( https://goo.gl/Lesu5Q ) which allows keeps your filament dry serves as a spool holder at the same time. This design allows you to replace the pneumatic connectors. Some users reported, that…
Hang all of your pneumatic tools under a cabinet, in your car og in the ceiling. There is a little indent so that the tool doesn't fall out by it self. You have to lift the tool and then pull it out. Hope you like it! PS. This is for the…
The engine is designed to not require any additional fasteners but it still needs some non printed parts and some tools. The assembly guide can be found as a PDF in the files. I'd recommend printing the 3mf files as their are some parts…
Simple clips for cable management
The Gears and Spacers should be printed in high detail (recommend 0.1mm layer height). The Feeder can be printed in 0.2mm or 0.3mm layer height. No supports are needed, but I highly recommend printing with a very large brim to keep the…
Filament outlet with PTFE pneumatic connection for Sunlu S2 Dryer with holes for M3 screws
Hey folks, after my other Modern NVG Project has gotten a lot of love and some comments, ive decided to create another model that is using less filament, therefore is less heavy and mounted more securely. So this model should be better if…
The case used for the TapTo USB-C Reader . Compatible with any of the black USB-C PN532 NFC modules available on sites like AliExpress. Please see the TapTo Wiki for more information about TapTo and the PN532 NFC module. This model is a…
Note, I posted this on Thingiverse as a remix here: https://www.thingiverse.com/thing:5438660 but had a problem associating it with my list of account models there so I moved it to Printables. -- Remixed only from the OBJ files posted by…
This model is compatible with the lego system.
Prívesok na kľúče umožňuje odomknúť nákupný košík. Zmenou polohy prívesku posunutím vpravo alebo vľavo je možné prívesok z košíku vytiahnuť. Je vytvorený podľa rozmeru 2€ mince. Mal by fungovať aj v Českej republike no nemám to overené.…
A simple but well functioning nose clip for apnea diving. I sandblasted mine which isn't necessary, but nice. Should clearance between the parts be an issue, scale accordingly. The cord prevents the clip from getting lost and keeps the…
Jack of all trades 3D printed RC car 4 wheel drive with metal diffs Top speed +85km/h on road Google docs: https://docs.google.com/document/d/1V-GrFOmn_nnJBDjQRQCdPkd5S-rc3ZkLpLimP1kR8IQ/edit?usp=sharing
Pieza de sustitución para cepillo Dyson Pneumatic.
ScrapNC Low Cost, 3D Printed, minimally performant, scalable CNC router for low demanding workloads like plastics, wood, cardboard, and plotting made from common 3D Printer components; specifically upcycled from the VzBot-330 and the…
This is my interpretation of the SPNKr from Halo 3. I completely modeled this myself in Fusion 360. The whole model was designed and is split up to be able to print on my i3MK3S and many of the pieces do not need supports. There are a…
Even though I liked the minimalistic design of the original LumenPnP strip feeders, they had some difficulties with both thicker paper tape (like 1.2mm thick with more bulky capacitors) being hard to push all the way through as well as…
This is a remix of Jazzychad's passive drag feeder design updated to work with the LumenPnP V3. V3 changed the nozzle's z-height which makes it no longer able to reach the previous model's tape. This remix uses a spare 2020 aluminum…
I remixed the model from LayersFarm to fit a M6 pneumatic connector instead of M10. It's the model for 5x5mm magnets .
Yet another solution to a problem that doesn't exist… Do you want poker chip feel to your Orleans Board Game Tokens? You don't want to spend $25-$40 for upgraded plastic tokens? You can't find coin capsules that fit your tokens? You don't…
A hypnotic fidget toy as seen on @lucythemaker's tiktok For commercial licensing - check out lucythemaker's thangs membership https://thangs.com/designer/lucythemaker Print Settings Material: PLA Layer Height: 0.2mm Supports: NONE Infill:…
Remix : 1.logo X1 → P1P 2.improve filament plug phenomemon 3.add a magnetic base with 2 6*3 magnets BOM ： 1.glue 2.6*3 magnets X7（N52 will be better） Print Material: PETG (optimal) - PLA (best) Layer height: 0.08mm (optimal) - 0.12mm…
I looked at other models people had made to hold air tools. I wanted one that held the tools at and angle so they don't have a chance to fall out of the holder, so I designed this. It looks small and like it won't take a lot of weight,…
Prusa screwed up bad with their PTFE conectors - they are unobtanium, along with brass olives that you CAN'T even order from them. So I modified greatest thing ever made by Ondřej Kotas on thingiverse (…
UPDATE: I made a version that supports an aluminum rod! This version uses a ½" aluminum rod that is 56" long. I recommend taking a 6ft aluminum rod and cutting it down. The parts are all assembled the same way as the original with the…
Rotate this kinetic spinner with both hand to get satisfying wave movement. Print in place without supports if you have very good bed adhesion. Otherwise use outer brim with offset 0.3mm. Offset distance is very important, so you can peel…
Adaptateurs de pneus gonflable de chez RollyToys pour être monté sur les tracteurs Peg Perego Ground Force. Adaptateurs pour roues arrière et roues avant. Pour les roues avant il faudra en plus repercer l'axe des roues avec une mèche de…
Tweaked the PC4-M6 remix of this fantastic design to add 6x3mm magnets.
tappo di chiusura per valvole dei pneumatici
This is a remix of the Ploopy Pick-and-Place Feeder that has been modified to work with the Lumen PnP, along with several improvements to the basic mechanisms to improve reliability. Added a mounting bracket for installation on the Lumen…
This adtabter allows the humid air to escape from the dryer. Unlike the edgett model An M6 thread is used for the fitting and an angle of 70 degrees so that the guide works with as little resistance as possible. Info: Make sure to print…
I made a filament drybox out of cereal storage containers (I used these: https://www.amazon.com/gp/product/B07NP98YKY) and Pneumatic PTFE fittings (I used these: https://www.amazon.com/gp/product/B01KHN1HWY). I designed this nut that fits…
3D model description I’ve created two separate waterproof cases one for the ESP32 WLAN module and another for the WT32-ETH01 module in combination with the PN532 NFC module to protect your electronics in outdoor or damp environments. Both…
Háček je pro žebřík Korado průměr trubky 20 mm a rozteč trubek 40 mm
The back piece should press fit into the back of the stock stepper motor. The front piece goes on the shaft. I have not tested this with the extruder housing installed since I run modified cooling. Printed in PETG at 0.2mm layer height.…
A light frame for 11mm servo - weight is just around 2,4 - 2,6g Designed for a Graupner C2081 Servo - but other 11mm servos like Hobbyking 939 should also fit. To create a left and right version mirror the STL file in your slicer Print…
Pneu de F1 2021 composée de 4 pièces, la jante, la jante arrière, le pneu et l'écrou. La jante est en deux partie pour pouvoir insérer le pneu entre les deux parties de la jante. La jante fait 370mm de diamètre et le pneu fait 600mm, le…
Lego 4697B (Pneumatic T-Bar)
univerzální klíč pro odemknutí nákupních vozíku
mince do nákupního košíku - dárek pro třídu
![Modern NVG/GPNVG18 Dummy [Weight Optimized/somewhat rugged]](https://media.printables.com/media/prints/1097091/images/8392416_0f3da76c-29c6-4053-845b-30f4e76e35fd_9d234c07-96f1-4dcc-9809-123519fe7e1c/nvgtrioadjusted.png)
![ESP32 + PN532 NFC Module Case [Waterproof]](https://media.printables.com/media/prints/1069827/images/8093768_c0631fd9-f6cf-4489-a895-df58f6477074_8d74c501-1612-4c6c-a51e-08b0623ff4a2/screenshot-2024-08-31-202814.png)
