3,708 models
This is a pocket hole jig for drilling accurate pocket holes. It works as well as the Kreg jig and uses the Kreg drill bit and screws. For most woodworkers this will last for years without the metal sleeve used in the Kreg jig. The first…
Print approx. €2.25–€2.75 excl. taxPreliminary estimate for PETGSource material: PET
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Print approx. €2.89–€3.53 excl. taxPreliminary estimate for one variant
Pocket Hole Woodjoining : tooling for drilling planks for assembly. mark template 2 for plank thickness. (10mm to 30mm) BOM : 1x Garabit 1 1x Gabarit 2 1x SCREW M5x20 STEEL 1x HEXAGON M5 2x drilling barrel 12mm diameter
Print approx. €6.71–€8.20 excl. taxPreliminary estimate for one variant
Travel back to the siege warfare era with the Toothpick Pocket Ballista. This miniature mechanical marvel takes inspiration from the powerful weapon of ancient times, perfectly sized to fit in your pocket. Ideal for history enthusiasts,…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
All the other comb models I found here had equally spaced teeth. This is a classic dual-density comb, with wider and thicker teeth on one side for thicker or wet hair, and finer, more narrowly spaced teeth on the other side for dry hair,…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
The story: Wanted to print small case for condoms which could be thrown in a bag and forgotten about without worry that the condoms will get damaged, because you know you should not keep condoms in a wallet. I could not find a single…
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
Tento inovativní 3D model skládacího ramínka vás ohromí svou jednoduchostí a praktičností. Ve složeném stavu se vejde do dlaně a je tak lehké, že ho můžete nosit kamkoliv. A co je nejlepší? Tiskne se v jednom kuse, bez potřeby podpěr!…
Print approx. €3.67–€4.49 excl. taxPreliminary estimate for one variant
This compact pill case is designed for situations where a full-size pill organizer would be unnecessary or impractical. Its ultra-slim form factor makes it ideal not only for travel, but also for everyday situations such as g oing out for…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
While the lockdown gardening shops were closed, but spring was already in! So had to quickly model and print a pocket shovel so solve some gardening time! Print without support and so far very solid! Print instructions PLA 0.2mm height, 3…
Standard DIN - Car Radio Dash pocket. Fusion 360 files for your customization/modification, as many cars and trucks dash varies. Print with PETG or ABS to handle summer car interior heat.
Inspired by the HexScraper and designed for the pocket tools challenge. With this pint-sized pocket pal packed in the pocket of your poncho, you can plunder PLA any place! Particularly if you are prone to placing piles of plastic pocket…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Next Update: There will be another version for the southern hemisphere. Update: US/UK version available as well the cover and storage for the pointer. Important: only the old cover fits the old model! For DIY in european and US/UK time.…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Case for Teenage Engineering's Pocket Operator. This case is compatible with the wire folding stand, and the loop at the top doesn't need to be removed. All LEDs shine through a small hole above each button, and there is a hole to allow…
I also made camping version. It is here : here Tento inovativní 3D model skládacího ramínka vás ohromí svou jednoduchostí a praktičností. Ve složeném stavu se vejde do dlaně a je tak lehké, že ho můžete nosit kamkoliv. A co je nejlepší?…
Print approx. €3.63–€4.44 excl. taxPreliminary estimate for one variant
The best way to start learning how we can do mathematic calculations using an Abacus is to print one. Forget your smart phone calculator and enjoy this ancient calculating tool. Again Fusion 360 has been very helpful for me to draw it.…
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
Stand to place your DJI Pocket 3 safely on your desk.
Print approx. €1.23–€1.50 excl. taxPreliminary estimate for one variant
When I was a child, my Grandfather made a slightly abstract wood cut nativity puzzle, which consisted of the holy family, 3 wise men, a shepherd, camel, 3 sheep and a cow. This is my attempt to recreate this project for 3D printers with…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Place a rubber mat behinde the mount and under the hooks. Then the Display is secured from scratches and the mount is not moving. Take superglue to put the two models together.
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
English Description This is a functional 3D-printable pocket hole punch with a clean and practical design. It is sturdy, easy to print, requires no supports or overhangs , and features a highlighted center mark that remains visible even…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
I was pleasantly surprised that a light touch of my thumb released just one card at a time. The spring seems to work. It holds 1 - 10 cards. It only took one design iteration to get the spring to work correctly. I know, I should have put…
Print approx. €2.94–€3.60 excl. taxPreliminary estimate for one variant
I remixed Jonas whistle with a scout sign emboss. Now updated! with 2 new models.
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
The magnets are inserted into the clip during two pauses that are preset in the print profile (two magnets at each pause). After the magnets are inserted, you must manually resume printing. Printer stops at layer 142 and 314. This…
Print approx. €1.24–€1.52 excl. taxPreliminary estimate for one variant
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Print approx. €1.92–€2.34 excl. taxPreliminary estimate for one variant
Do people still need these? Fits 7 pens (including sharpies) and most pockets. Rounded edges for comfort. No flap.
Print approx. €2.71–€3.31 excl. taxPreliminary estimate for one variant
Idea As a designer and maker having a knife or a multitool is an absolute must for me. In fact, I always have my swiss army knife in my pocket, but sometimes it could be uncomfortable or difficult to take it out of there. I already saw a…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
This is a cloth mask based on the Olson design and leveraged from a pattern published by Clayton Skousen and Rose Hedges of UnityPoint Health in Des Moines, Iowa, USA. This is a pattern that needs to be sewn. As the Covid--19 Pandemic…
Print approx. €0.27–€0.33 excl. taxPreliminary estimate for PETGSource material: PET
Taschenaschenbecher mit Öse für eine Kette
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I used a M2*8 set nut with an 8mm M2 screw to attach the lid. There is also space to insert 2mm diameter x 1mm deep magnets in the lid to help it stay clipped closed. Print the tip holder required and place in the case. There are holders…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Features: • Precise drilling of angled holes • 15 ° degree angle • Can be clamped in place before drilling • Helpful in creating hidden joinery Print instructions My recommendation: • 0.2mm layer height • 30% Grid infill • 3 Perimeters
Nozzle: 0.4 Layer Height: 0.28mm - 0.3mm (Recommended) Scale it as you like :)
Alternative stick ends for the Radiomaster Pocket. Requires 2 M3x8 hex screws (on for each stick). Recommended to print with a brim, due to the small bottom area.
Opens sideways when the nut is not tightened and the nut stays attached (and will not get lost) even when unlocked. Lets you open your bag with ease using two hands while at the same time making it more difficult for pick-pocketers to…
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Print everything, align well, and give it a solid press from the top with your palm. You need some force to assemble, but it won't fall apart in your kids' hands.
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Purpose I wanted to create an easy-to-use, compact and portable third hand or mini vise to use when soldering small wires on my electronics and also when working in my car. This can sit on a table lying flat or stand vertically - what…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
New version! Check the filenames! Changes from v1 to v2 (check the picture with blue numbers) : Reduced the ventilation holes from 3 to 1 to facilitate cleaning the case with isopropyl alcohol. Increased the length of the hollow of the…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
You will have to add your own drainage if you want it. Makes a legit remote holder too. If you need a pot that drains find the original Charming Villa Planter with drainage.
Print approx. €3.50–€4.27 excl. taxPreliminary estimate for one variant
As model name says, was part of my overal project to tidy my place a bit. Using my old CFW PS3 as media player i have to flip it vertically, but original stand is on the oposite side make it hard to access BD drive for me, later i next…
Print approx. €7.74–€9.46 excl. taxPreliminary estimate for one variant
This ambidextrous pouch allows the pistol operator to store two magazines of cartridges in his nondominant pants pocket. It holds the mags upright, minimizes rattle, and keeps pocket lint out, in contrast to carrying magazines in a pocket…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
I wanted to improve my Fusion 360 skills as I have only started using it recently I thought, what better way than to design a series of pocket games that fit neatly into an Altoids (or similar) tin This is the first of many, tic-tac-toe,…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for PETGSource material: PET
material PLA, no Support
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
It's a minimal pocket Business card holder for EU 50x90 cards I couldn't find one that satisfies me, therefore I decided to make one from scratch.
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for PETGSource material: PET
This card is similar to others I have published, except it is plain, without an embedded message, and without a pocket within. A single, vertical print is used to print the card with the hinge. The hinge works nicely. It will likely be…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
This is a great print to keep your pocket knives organized. Print multiple organizers if you have a larger collection. You can also scale it up if you have larger knives. Happy Printing! You can help To help cover the expenses of printing…
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for one variant
I printed it from PETG Prusament and fold box when print was still a little bit warm.
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
pocketbook verse / empik gobook 2 screen cover
Print approx. €2.01–€2.46 excl. taxPreliminary estimate for PETGSource material: PET
Pocket hole jig for a 3/8th inch (~10 mm) drill bit. It is parametric so it can be scaled up or down to meet your needs. Kreg Pocket Hole Jigs seems to be everywhere. How about we save a few bucks and print our own? Why use a jig? It…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
I wanted the BRDRC filters to fit in the packaging as well. You have to print the empty box and than you can add the inserts. If you want you can also print the original insert.
[EN] You can find the description in English below [ES] Tapones para Pocket Hole Estos tapones para pocket hole son la solución ideal para ocultar de manera limpia y profesional los orificios de los tornillos en tus proyectos de…
Adjustable beads for cord locks elastic drawstring
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
I love the Analogue Pocket and its dock. However, the dock has an annoying design flaw. The dock's USB-C plug is slightly taller than the recess it sticks out of. These guide rails (ugly, but functional) make it much easier to line up the…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
IKEA SKADIS Pocket Knife Hook Clip for your pocket clip. Simply clip your pocket knife to this hook / holder. It works for almost anything with the pocket clip, not only knives, but also multitools and flashlights. Tested with following:…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
This ambidextrous pouch allows the pistol operator to store two magazines of cartridges in his nondominant pants pocket. It holds the mags upright, minimizes rattle, and keeps pocket lint out, in contrast to carrying magazines in a pocket…
Being someone who often lays down and walks around in wet areas while shooting with my Instax Square camera, I wanted a better way to protect and carry the photographs while and after they're developing - so I came up with this. This case…
Print approx. €5.37–€6.56 excl. taxPreliminary estimate for one variant
Do you love your Miyoo Mini, but sometimes wish it was just ever so slightly bigger and more comfortable to hold? Me too. So I got my calipers out and measured my old Gameboy Pocket, and designed a grip to slide the Miyoo Mini into. You…
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for one variant
Remix GoPro Tripod Mount with a pocket hole for a 1/4" Hex Nut + remix for Insert Nut
Print approx. €0.73–€0.90 excl. taxPreliminary estimate for one variant
This is a pocketbox for businesscards and made for cards with the dimension 55 mm x 86 mm. It can contain several cards and can also be used to display them. The box itself has the dimensions 92 mm x 61 mm x 7,2 mm. The GCode contains…
Print approx. €1.83–€2.24 excl. taxPreliminary estimate for one variant
This 3D model captures the essence of the iconic Tupperware tumbler in a keychain-sized collectable. Designed to perfect scale, the model features the tumbler's signature details: Sleek, rounded body: The familiar silhouette of the…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
These are two holsters for the compact 16ml pepper-spray bottles of Walther . I needed a way to somehow attach it to a cord, to hang it in an easy to reach spot inside my car. I printed it vertically using Prusament PETG – the…
This Pocket Sewing Kit measures 90x80mm and can hold all the necessary tools to sew in emergency cases. You can customize your Pocket Sewing Kit according to your preferences. The three trays can contain needles, safety pins, thread…
Print approx. €0.87–€1.07 excl. taxPreliminary estimate for one variant
Carrying one or more keys without a cover in your jeans pocket imposes a significant risk for your pockets and your smartphone (if that is in the same pocket). The key might poke through your pockets and you will loose it. Or it will…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
Cover for the Kreg Jig 320 to collect dust with a CLEANTEC connect. Reuse the Kreg clamp adapter pad to ease positioning. To make sure the connection between the plate and the connector is solid, the in-fill is bumped to 35%. The first…
Say goodbye to arthritis! This is a grip for Bittboy PocketGo v1. I designed this to improve the console's ergonomics since the default console is too small and not comfortable for an extended time of gameplay. I designed the model using…
Print approx. €5.47–€6.69 excl. taxPreliminary estimate for one variant
Dump everything from your pocket in the tray with a filter. The filter with holes would drop your coins at the bottom and keeps your keys and larger items on top. Designed this for Printables Catch-All Trays contest. You can design your…
Do you have multiple phones, and nowhere to store them? Do you use more than one phone for work, or anything else, but they don't support wireless charging so you're constantly running over the cable with your chair, but you're too lazy…
Print approx. €6.61–€8.08 excl. taxPreliminary estimate for one variant
I wanted the sides of my Lack Enclosure v2 to be removable for maintenance access (without removing the entire top U-frame), while also using @Drakka01's excellent Pocket Doors remix , so I came up with this. Due to a request, I've also…
Print approx. €6.35–€7.76 excl. taxPreliminary estimate for PETGSource material: PET
I redesigned the original models to be a bit more sturdy and less likely to break. Printing Instructions: 100% infill Do not go too fast or too hot, because of the thin handles. I printed the first layer at 210°C and the subsequent ones…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
Placatá píšťalka s motivem měsíce. Modely jsou ve 4 variantách orientace měsíce - vpravo, vlevo, nahoru, dolů. Tiskový soubor (.gcode) obsahuje všechny 4 varianty, je v něm nastaveno přerušení tisku pro výměnu filamentu jiné barvy. Pokud…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
This is a bedside Every Day Carry (EDC) caddy. I built this for: a built in watch charger holder for the Samsung Galaxy Watch Ultra a ridge type wallet with money clip (and a lot of cards A pocket knife slot (I have bench made with pocket…
Print approx. €5.77–€7.06 excl. taxPreliminary estimate for one variant
ESP8266 based Deauther with 0.96" OLED display and lipo battery using store bought hardware and Spacehuhn software. 3MDF files. Use them with any slicer. For case: Infill 20%+ For hardware you will need: 1) 1x ESP8266 NodeMCU 2) 1x 0.96"…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
Keep your small essentials organized and easily accessible with the Mini Pocket Slide Box . Designed with a smooth sliding lid and a secure "click" closure , this container ensures your items stay safe while on the go.
Print approx. €1.61–€1.97 excl. taxPreliminary estimate for one variant
PLA, 15% adaptive cubic infill and 2 perimeters has given me a suitable balance of stiffness between not falling off while working and not being too cumbersome to detach. PETG is too bendy for this. Push the top prong down with your thumb…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for one variant
For a small video production with a telephoto lens on the Canon R (on a tripod), I needed an adapter for the DJI Osmo Pocket to be able to film the wide shot at the same time. I found a solution on Cults3D at User “ 3D-Designs” , which…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for one variant
Rugged Case for Pocket Book Touch Lux 3 REMARK 1: CAT logo on Bottom part: first print one color CAT gcode, remove skirt, and dont let yout printer cool down, print over this part the BOT G code so will have 2 color final part wit logo…
Kostka, kterou lze používat k Pocket Tetris Balance Game. A dice that can be used for Pocket Tetris Balance Game.
Protect you (toy) oscilloscope! Has cutouts for power, ventilation, and all buttons. Printing Instructions Printed from PLA with high infill and no supports. Consider printing the buttons and switches separately with brims.
Print approx. €5.26–€6.43 excl. taxPreliminary estimate for one variant
Background: The Printables Back to School contest got me thinking about what I actually needed in school that I never had. The answer wasn't pencil cases or rulers. It was tissues. If you're like me, you had allergies and frequent nose…
Print approx. €1.79–€2.18 excl. taxPreliminary estimate for one variant
Need quick protection? Have to touch something that might be contaminated? Well, you're in luck, introducing the pocket tissue dispenser! The pocket tissue dispenser is your protection when you need to open a door, push the elevator…
Print approx. €3.25–€3.97 excl. taxPreliminary estimate for one variant
About This is a pocket version of the Glia stethoscope [1]. It's fully functional, however not meant for a clinical use, but as a giveaway. Authors Developed, tested and built at the OpenLab MedTec [2] by OStGefr d.R Foxley OStGefr…
Print approx. €3.47–€4.25 excl. taxPreliminary estimate for one variant
This is a leg strap mount for the CWMorse Pocket Paddle: https://cwmorse.us/products/blue-yellow-pocket-double-paddle-morse-code-key CWMorse sells a leg strap mount for their Pocket Paddles, but I wanted one that would work with the…
Print approx. €0.93–€1.14 excl. taxPreliminary estimate for PETGSource material: PET
Print out left and right holder and attach to wall or bed with double-sided tape at the correct spacing. Slot width: 13 mm. Print settings: PLA 0,4 mm nozzle 0,2 mm layer no supports
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
Stable stand for PocketBook 700 Era with cover (width 12,7 mm), holes on the bottom for self-adhesive 8mm non-slip pads. Optimal for charging and storing your PocketBook if you want to save space on your desk. Printed with 4 perimeters…
Print approx. €3.06–€3.74 excl. taxPreliminary estimate for one variant
This portable chess and checkers set is designed to fit into any standard paper towel tube and can be scaled for different sizes. It features a simple coin design that is compact, light, stackable, and packable all in the size of a paper…
Print approx. €1.96–€2.39 excl. taxPreliminary estimate for one variant
This match for tissues protecter ptissue_stor (2) ptissue_2 or 2ptissue to mk3s The last one ptissue_stor (1) is for small objekt you ned to protect
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
This pocket protector is designed for use in a lab coat, where small objects like pens and screwdrivers can fall out of a pocket causing contamination of the workspace or damage to equipment. Or, items in the pocket can poke holes or leak…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
This is a optimized layout of 6 pocket catapults. https://www.printables.com/model/216276-pocket-catapult/files
Print approx. €7.58–€9.26 excl. taxPreliminary estimate for one variant
A removable bracket or the Pegasus Pocket Powerbox (PPB) Micro that clips onto a 1.75 tripod tube The tube clip is just pushed onto the tube and also has a bolt and heated insert to secure further. The PPB is attached to a bracket via two…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Remix using sidewall and peg connectors from Layerguru's Modular Shelving System that adds a Side Pocket for storage of a Radius Gauge (my print of the gauge used for the Side Pocket design is Ankhadia's Radius Gauge 1-20mm M3 Bolt Remix…
Print approx. €3.93–€4.81 excl. taxPreliminary estimate for PETGSource material: PET
This is a remix of the excellent model by JYC_RS. I printed this a while ago but was never happy with the overall stability. So I added some weight pockets to the base. The new version is visually identical, while the total mass increased…
Print approx. €10.21–€12.48 excl. taxPreliminary estimate for one variant
Kershaw Iridium pocket knife blank for filling in the unused pocket clip side. Press fit design. 0.10mm Layer Height 100% infill Pictured in PA-CF, but can be printed in any PLA of choice.
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
The pocket puck is a useful coin organizer that can hold up to $2 worth of quarters and other coins so that you always have them on you.
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
Storage & dispenser for a 12 pack of pocket tissues. Can be hanged on a hook or placed on the provided angled base.
I am working on design practices and the only way to get this to print is vertically, so we want as little post-processing and for it to be easy in the settings so we added a corner sprue to hold it down and not need a brim, it's not that…
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for PETGSource material: PET
a compact catapult for launching small pieces of eraser/gum to your fellow students :)
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
The #3 king in the original set isn't perfectly level. This fixes that. (Helps with bed adhesion)
Print approx. €0.21–€0.26 excl. taxPreliminary estimate for one variant
El reemplazo perfecto para los tornillos de marca kreg, para usar tornillos comunes y más económicos en las uniones de bolsillo.
Print approx. €4.99–€6.09 excl. taxPreliminary estimate for one variant
AnyCounter is a script-driven OpenSCAD model for building compact, reusable counters that can track almost anything: scores, pills, rounds, habits, rows, parts, turns, and more. You choose your value set, case style, window placement,…
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
To a great Modular Shelving System from Layerguru, this remix retains the sidewall dimensions and a system connector, and offers a side pocket holder for storing a 6" digital caliper and an Allen Key Wrench (my design accommodates the 2.5…
Print approx. €4.43–€5.41 excl. taxPreliminary estimate for PETGSource material: PET
Allows an attachment to be screwed to the bottom of the ‘do it all handle’ and provides more support for the camera. Suits DJI Pocket 2. There are 2 versions of the CAD files supplied. V1 - small lip, 56mm x 45mm, to suit my quick-plate…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
This compact wall mount is designed for the Wolfcraft Undercover Jig. All parts can be inserted easily and removed just as quickly. The main advantage is the significant space saving: instead of using the bulky original case, all…
Print approx. €3.36–€4.11 excl. taxPreliminary estimate for PETGSource material: PET
I little watch that i am trying to make look like the one in descendants 4.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
