Counting matching models…
I downloaded Mickey Mouse for $5 on this website, but I only wanted the hand so I could make it into one of the pointer finger sticks. I've designes it so that you can slide it onto a bic pen. Here's the original model:…
Someone requested a customizable collapsible sword - and here is my take on that topic. I decided to print a wand, but you can choose a more sword-like shape. Collapsed length, number and thickness of segments - your choice also affects…
I present two fully functional shurikens, 5 and 6-pointed. After some tests, I found that these shurikens are easier to throw, so they are better for beginners. But, in order to work well, you need to print them with 100% infill. Also…
This model is compatible with the lego system.
This is a v1 there is a better v2 https://www.printables.com/model/1683130-collapsible-pointer-finger-stick-v2/comments Collapsible pointer stick It hase an updated bottom wich slides on Made on elegoo neptune 3 layers-0.2 infill-15% Gird…
I modified the Barbie Doll Shoes I created previously. Its more sharp, the sole is less rounder and more surface area for the heel for better bed adherence. It has been approved by my granddaughter quality control department.
This model is compatible with the lego system.
Enhancing the corners, especially when refining the pointed edges of shirt collars or pocket (like I have shown), is made easier with this method. It is an essential tool in sewing equipment. Printed in Orange since it is easier to find…
Pocket indicator. It is useful for me when working together on one monitor, for example, when I need to point something. Folded length approx. 13 cm. When unfolded, approximately 50-52 cm. Max diameter approx. 13 mm The indicator consists…
Realistic and usable shuriken model. Print with 100% infill to achieve best results. My shuriken collection: https://www.printables.com/pl/@FilipB_1535214/collections/1067801
“Every day, ere the hour of dawn, the gardeners would pick the roses which lined the four avenues of the garden, and would pile them in the center of the floor of His blessed tent. So great would be the heap that when His companions…
This model is compatible with the lego system.
I wanted a better indication of what filament is currently loaded. So I designed this pointer, which you can simply put on top the selector front plate. It is held by friction. No supports needed Designed for 0.2mm layerheight and 0.4mm…
Collapsible pointer stick New bottom Made on elegoo neptune 3 layers-0.2 infill-15% Gird PLA supports-yes I used 1.5 mm layers for the finger to be more detailed
My friends became tired of always getting punched from looking at the Circle Game. So I made them a Pointer Finger Blade for them to use to “Break” the Circle and get their revenge. Hope You Enjoy As Well!
⚠ IMPORTANT WARNING: The inner extending tubes MUST be printed individually in Spiral Vase Mode (Spiralize Outer Contour) with 0 bottom layers ! If you print them in standard mode (normal walls), the segments will become too thick, will…
pinpointer Minelab PRO-FIND kryt pasuje samozrejme do drzaku
Step into the future with the Pointer9000! To assemble this marvel of wireless precision and retro design you need bambulab's Wireless Mouse Components Kit . Help me create more FREE models! If you like the stuff I create, consider…
Oryginal post: https://www.thingiverse.com/thing:4917505 Web archive of the website: https://web.archive.org/web/20220528232449/https://www.jjrobots.com/remotely-controlled-laser-pointer/ https://github.com/Gerber-pacman/ESP32-Turret List…
Define size and thickness with the slicer. You can also load a set, then “split to objects” and set number of each variant (on PrusaSlicer). Since I work with my MK4, brim is not needed any more because of better first layer! :-) If you…
Plated for 8 individual pointers, or for 1 single pointer - printed at 20% infill with PETG for flexibility/break resistance given how young kids can be. Organic supports on build plate only
This is a Chicago Star inspired ornament ( here's my previous one ). It looks particularly good with co-extrusion filaments, where you can twist the captive stars to angles that show off all the different colors at once. This is an easy…
"Concerning the number nine: the Baháʼís reverence this for two reasons, first because it is considered by those interested in numbers as the sign of perfection. The second consideration, which is the more important one, is that it is the…
Multimeter probe tweezer easy to print
Have you ever needed to point at something but not want to use your hand well here's the solution!
Chevy GMC GM transmission gear shift pointer indicator part No: "7840995" It may also fit other vehicles with the same style pointer The gear pointer broke when I was replacing the lightbulb for the indicator, a new one cost $60, so I…
This is a classic motif and pattern seen in Arabic culture & Islamic art. Used in countless applications, from walls to carvings and even jewelry. There is so much geometry & mathematics packed in this beautiful star. I created these…
Detailed 3D model of a Hungarian Vizsla dog, capturing the breed's distinctive athletic build and elegant posture. This sculpture showcases the Vizsla's sleek lines, muscular physique, and characteristic pose. Ideal for dog lovers, breed…
Sculpted in Oculus Medium, mesh reduced in Blender, cut in Slic3r (to create flat plane across all feet). Printed quick and dirty...I know its awful. :) Category: Animals
A pointer for a stepper motor shaft. Used in initial testing of stepper motors. Category: 3D Printer Accessories
Thing Pointer is a versatile 3D model featuring a hand with a pointing finger on a stick. For all your indicating needs! Versions Depending on whether you want to print the stick or use wood/pastic/metal rods, you can choose from:…
I am back. Sorry I was away. But this a new version of the stick. It's way better and nicer. I am using a new cad befor I did it in tinker cad but now im using onshape. The models are cleaner and more acurate. I also listened to what you…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layers in your slicer settings, change out your filament when the pause in effect, and…
this shuriken is a great print and goes great with medyk3D's folding karambit.
Rounded 5cm star bead with 5mm hole. Designed in Illustrator and TinkerCAD. Category: Accessories Note: This design is re-published from Thingiverse and was originally uploaded on Feb 1, 2019.
Unleash your inner ninja with a stunning shuriken, Perfect for adding a touch of oriental flair to your home decor or as a show-stopping accessory for your cosplay ensemble. The possibilities are endless, so let your imagination run wild!…
This is a simple 2D Super Mario pointer. My daughter requested a pointer for her youtube channel so I made her one using Mario's hand of course.
Digging tip for Pinpointer Garrett Pro-Pointer. (Press fit)
Uses either 9 or 15 MF63ZZ bearings (https://www.amazon.com/MF63ZZ-Shielded-Flanged-Flange-Bearing/dp/B07K78GY7N) and an equal number of 8-12mm M3 countersunk screws…
This model features a thick, palm-held grip design with a pointed profile and textured edges for a secure hold. The shape is compact and solid, intended to sit comfortably in the hand while maintaining a bold, geometric appearance. The…
added a groove in the middle of the pointer Remixed from https://www.printables.com/model/636606-timemore-sculptor-078-
This model is compatible with the lego system.
Astronomy Mounting Bracket for Laser Pointer (Viven stile Dovetai) Version 1 You need print these parts: 1x laser_finder BOM 1x Laser pointer 6x M3 screw NOTE Use a tap to create a M3 thread Version 2 You need print these parts: 1x laser2…
This model is compatible with the lego system.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Several of these pointers have been published already. It happen that I had only 5x5x5 mm cube magnets, or round 5 by 5 mm magnets. So I quickly designed this variation from scratch with fusion 360 (file included). In case you have also…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Number pointer is a friction fit. Simply align and press it…
This model is compatible with the lego system.
Smart Laser Pointer for Pets – Interactive Toy for Animals Introduction Want to keep your cat (or curious dog) entertained without manually moving the laser pointer? The Smart Laser Pointer for Pets is the perfect solution! This automatic…
Recommended print settings: Material: PLA Layer Height: 0.10 Infill % : 15+ Supports: No Print Orientation: Flat side down Vectors image by SVG Repo : https://www.svgrepo.com/svg/477542/pointing-glove
PinPointer holder for Minelab Vanquish. I used a M5x40 countersunk screw and an M5 nut to connect the two parts around the detector rod. I glued felt to both inner parts of the sleeve to protect against scratching the rod and for better…
A highly customizable set of caps for any potentiometers in use on DJ equipment. Specifically designed for the D pots commonly found in mixing gear. The customization options allow for a simple switch to round pots. The design comes in…
A pointing hand model that you can attach at the end of some stick. Easy to adapt to various stick diameters - just use the attached .scad source file to tweak the sizes (or finger lenghts, curl etc.) Enable supports to print properly (if…
A German Shorthaired Pointer figurine with an athletic standing pose and simplified anatomy. Designed for single-color FDM printing as a solid one-piece model with reliable structural strength. Powered by MakerWorld-Image-to-3D (…
This model is compatible with the lego system.
This is a telesope-mounted holder for a laser pointer. I bought this pointer during a trip to China and it's powerful enough to point out stars at infinity and can take down small birds. This item on Amazon appears to be identical to…
A robust, sleek and easy way to add an additional laser pointer to your Creality Falcon2 laser so it is easier to position over your workpiece, ensuring it starts wherever you have the laser set to, helping to maximize material usage. It…
A simple cutting board rack printable without supports in one piece in the shape of pointed (gothic) arch.
This model is compatible with the lego system.
I used a .4 nozzel with a .8 (mm) thickness on shell , top and bottom. I've printed these at 50% and 100% but they should work well on other infill densities. Feel free to remix this tip however you want to. I was in a hurry when I…
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
A redesign of the Index Grip (specifically the stubby version) to use m3 bolts and nuts for mounting, providing a far more secure and durable mounting platform and potentially making the hardware more accessible. Print Info: Print with…
Use this to mount the laser pointer on your telescope. Vixen type mount. Print Details Use PETG or Nylon. PLA is too soft. I used 20% infill so it can hold the force of screws. You will need M3 screws and M3 insert nuts as well with this.
Cover for minelab pinpointer Minelab Pro-find. Optimized for 0,2mm layer, recommended PETG, or similar materials. Added ribs for better work in loam. (For better qualitty I recommend switch off arachne and modify locations of seams) Good…
I liked Tom 's idea of using an indicator that more accurately shows which filament is currently loaded. In order to visually adapt it to the MMU3, a two-color pointer is required. In my case the base color is black with a white arrow. So…
rapidstrike Category: Toy & Game Accessories
Baha'i nine-pointed star with inlay. Attached SVG file can be used to cut the inlay with a cricut cutter or similar. Category: Decor
These are replacement pointers/clickers for WinSpin brand prize wheels (12" & 14" dia. models), with seven levels of resistance. The stock pointer that comes with the product slows down the spin fairly quickly. I wanted the wheel to spin…
After converting my MMU3 to an UltiMulti MMU3 , I felt it was missing something. More specifically, the little splash of color offered by the original MMU3 label-plate. The angle of the embossed slot labels when the UltiMulti is mounted…
Meet CUTE - C hristmas U nique T emplates E dition ⭐ Designed as 2 in 1 - cut your cookies with details or just an outline. Outer cutter has also beveled edges for easier cutting. Min. dough thickness for inner detail to be visible should…
Made myself a tweezer that is compact, strong and precise. Printed in PLA, 25% infill, 4 perimeters. FreeCAD modeling.
Dovetail laser pointer bracket for cheap chinese laser pointers. Print out of PLA or PETG BOM: 3x M3x14 screws (exact length is not important) 3x M3 heat set insert 1x laser pointer
A 3D print that allows you to mount a normal laser pointer onto your gun/airsoft gun. I made three files, one is the front half that the laser shines out of, the back half, and the switch that allows you to keep the laser on. -Print the…
Kung Fu Panda Po with two curved five-pointed stars
This model is compatible with the lego system.
The laser monter of the original modell is special for the athors laser. The remixed mounter is compatible with the most common 14 mm diameter laser pointers. It is easy to modify in the Fusion 360 file.
Geometric dog wall art - “German-Shorthaired-Pointer style”: Default size is around 135cmx105cm 74 pcs (all parts can be print at full size on a standard printer bed) All parts are numbered on the back and here you can find the numbers…
I made these in a pinch and they work remarkably well. I recommend printing them with support, I printed 4 without and the tips are warped because of it. The 5th I printed with support and the tips look perfect. All the needles needed…
Update 10/26/2021: I ordered a CNC Shield V4 by KEYESTUDIO (which is a black PCB with yellow connectors. It appears to have corrected circuit traces on the PCB unlike the red CNC Shield V4 clone boards to make the microstepping jumpers…
This model is compatible with the lego system.
Upgrade your Nerf blaster with this custom-designed laser pointer holder! This 3D printable accessory securely mounts onto the standard tactical rail found on many Nerf guns and is engineered to fit common budget store laser pointers…
This model is a star fidget that can be used as a toy or for stress relief. It can be used for making cool designs and keeping your hands busy. This model is a repost of my model on MakerWorld:…
Mounter of laser pointers with outer diameter of φ14.6 mm for optical post When twisted, the switch is pressed and the laser pointer is turned on. The optical post fits a 1/2 inch diameter or 12 mm diameter. The slit version will fit even…
Simple addition to a cheap laser pointer that makes turning it on accidentally less likely. Instead of pressing a button the user has to turn the switch to engage the laser, this also allows the user to leave the device turned on without…
This model is compatible with the lego system.
simple christmas tree topper, ~3:20h on bambu p1s
add numbers for easy reading helps my kids little more Custom watch pointer for 7mm Shaft Custom Top Infil pattern in .3mf thanks for the original designer
tl;dr two versions of closing mechanisms: clips or magnets (5x2mm) different box sizes: file names refer to needle size (diameter x length) print in place ➡ break in hinges ➡ glue in magnets (optional) ➡ knit! 🎉 Box for a set of double…
A head pointer is used by individuals with limited hand or arm control to interact with a physical keyboard or a capacitive, computer/tablet touchscreen. It can also be used to manipulate objects like turning pages in a book. Head…
This model is compatible with the lego system.
We use this so it's easier to sweep the laser around for pets to chase without having to press the button down. The ring can be slid into place and twisted counterclockwise over the laser pointer's button and will remain on without…
It's kind of the Google Maps logo that I've used for a sign in a wedding
