Counting matching models…
Polaris ranger / RZR seat belt bypass. NOTE: I DO NOT CONDONE BYPASSING SAFETY DEVICES, AND DO NOT TAKE ANY RESPONSIBILITY FOR THE USE OF THIS TO BYPASS SAFETY DEVICES.
POLARIS KEY COVER For RZR Ranger General Sportsman from TPU Two models: Wider top with place for adding personal name, this specific has my name on it, Slim top without place for personal name.
Remix of https://www.thingiverse.com/thing:2938514 I extended the bottom edge to 7.5mm for a little more protection from mud and water, and made the grips on it extend out a little further from the original. This has a great feel in the…
Quick little print keychain. Color change at 3.2mm
Simple holder for Polaris magnets, to fit in the character deluxe storage.
Little Green Army Men : Military ATV : Polaris MRZR Alpha
I remixed this from https://www.thingiverse.com/thing:4777997, I wanted a model with a solid center so I could add more color to it. It worked really well with a filament color change. Don't forget to post your make and get your…
Polaris star logo wheel cap for Pro armor wheel Made of ASA Maybe can fit also for other polaris wheels i printed it in two colors with height stop the model glued to wheel with rtv silicone and it fit and survive perfect more than two…
Polaris RZR Floor drain plug Removing the hump allowing a smooth finish. I used medium supports with 50 % support fill. and had the image at about 42% angle. if requested I will attach a supported file.
This RZR keychain .step file is ready to for go AMS. Change the colors in the ‘objects’ box under Process in Bambu Studio. Those without AMS can print this keychain by adding a pause at layer 16, or 3.2mm, and changing the color manually.…
Wanted a floor plug to replace the OEM one that lets dust in. This is a low profile plug that is solid to greatly reduce the amount of dust that can get in. The square block is a key for installing/removing the plugs and can be put on…
Vintage Polaris snowmobile logo extruded from a PNG using OpenSCAD . Print instructions Download. (add layer change command) Slice. Print. Repeat if necessary. Summary Just a simple logo-to-sign exercise using retro Polaris snowmobile…
This is a remix from Update: Just added some inserts if you would like to make the face more unique! Print them and glue them in there respective spots https://www.thingiverse.com/thing:5162652 His model was broken and unprintable, after…
This wrench is designed to specifically fit a 2016 Polaris Ranger ETX, but I am sure it will fit many other models and, possibly, makes. It is designed to fit a 200x200mm bed and assembled using either superglue or, my preference -…
polaris rzr silhouette, scale to the size you need
NEW VERSION V5 Phone holder for Polaris Sportsman, the holder adapts perfectly to the dashboard and does not require any type of disassembly of any part for its assembly. Simply insert it under the handlebar and screw it with 6mm nuts,…
I printed with PETG. 3 perimeters and 100% infill. I used supports as needed. I've been using them for over a month now and so far so good. I'll update when I check them after 2 months. The originals only lasted 14 months and cost $190 to…
I couldn't find one so as a learning experience I made these. Cup holder opening is 92mm wide to easily drop a phone into also. Uploaded both Blank and RZR cutout versions as they are identical otherwise. Its a tight fit but this was…
Designed this so individuals riding in the back of my XP 4 1000 can have a spot for storing smaller sized items. I used some fasteners from my local hardware store to install. May do a V2 at a later date. In the model, I would like to…
I needed a simple oilwrench for my Polaris Sportsman 570 and Polaris Ranger XP 1000 so I made it. Grips firmly on to the filter and stays in place. Easy one handed operation.
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends polaris rzr unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy!
Lightsaber belt holster This is my design for a holster that keeps the lightsaber attached to a belt or pants. This is made for Polaris lightsabers , but it can hold any lightsaber with 25mm diameter blade allowed for lightsaber combat in…
I made these clamps to go on the roll cage to hold my top light bar and my rear lights. The roll cage is 1.75" in diameter, and I made these to fit exactly that. They're tight, but they're not that bad to get on. I just used a drill bit…
WalMart Super Tech Quart Oil Coupler by RebelTaz We go through a lot of oit in my shop. You would be surprised how much oil gets thrown away in "empty" bottles. We let every bottle drain into a common bottle overnight and over the course…
These clasps will eventually fail on you (as this one did). I wouldn't even guess at how much the OEM would charge to replace them. My original in ABS did well (grey), and the second one in PETG (black) should do ok too. For strength,…
This is the gasket that goes on the bottom of the carbs where they mount up to the ski. I needed them and didn't want to wait for shipping. They are holding up really well so far. Must be printed in TPU. The part should be all bottom and…
This is my Polaris RZR Lightbox and what I used to assemble it. Bambu Labs P1S/AMS .04 Nozzle 10% Gyroid Infill Filaments used for this project: Elegoo PLA - Black Elegoo PLA - White Software: -Fusion360 -Bambu Studio Materials: -LED kit…
I made these to angle my backup camera on my 2021 Polaris Ranger Northstar Crew after seeing that in the factory position, it points towards the ground and doesn't really give a good view behind the side by side. These are just two simple…
This is a dice and chip storage tray for the Gearloc Polaris from the board game Too Many Bones. A sliding lid for the tray is available in a separate posting…
I bought a rocker panel dash add on for my RZR and it didn't have a template to cut the plastic/fiberglass out, so I made this. Pretty simple and basic.
This is my Polaris Lightbox and what I used to assemble it. Bambu Labs P1S/AMS .04 Nozzle 10% Gyroid Infill Filaments used for this project: Polymaker PLA - Dark Blue Elegoo PLA - Black Elegoo PLA - White Software: -Fusion360 -Bambu…
My son lost the battery door for his New Bright Polaris RC car. The battery door is actually holding in the charging USB cable and keeping it from dragging while driving the device car around.
Double din radio bracket for the dry box on polaris rzr. Requires m3 hardware, and trimming the lip on the hole the dry box was in. this is designed to have the box cut in 2 flush with the lip on the dry box and this is slipped in and…
Replacement suspension bushings for a 2004 Polaris Sportsman 500. There are probably other Polaris models that these fit. I purchased a set of these and they were made of hard plastic and I wanted to be able to print them in TPU so I…
Snowmobile Fuel Gas Cap This is made for a backup cap. I was tired of having the factory gas cap with guage top break off and then fuel leak everywhere... This is a solid "NOT Vented" cap to throw in your windshield bag so if this happens…
I am always loosing or smashing the center hub cap on my Polaris RZR Ranger during offroading. For $25 a pop they start to add up. I designed a multi material center hub that can be easily printed on a single, dual, or multi material…
I snapped my throttle lever while spraying one day. This was my first attempt at 3D Modelling something. A few revisions later and this is what i ended up with. I tried modelling it as close to factory as i could. A few minor tweaks to be…
This RZR keychain .step file is ready to for go AMS. Change the colors in the ‘objects’ box under Process in Bambu Studio. Those without AMS can print this keychain by adding a pause at layer 16, or 3.2mm, and changing the color manually.…
This is my solution to motorize R.A. axis on stock telescope EQ mount. No irrevisible modifications of the mount needed. Just print and snap it on. Accurate enough for visual, nothing more, nothing less. It includes: NEMA17 90 degree…
Polaris Keychain. Remixed from " Blank Keychain Template " by @TylerVberg Polaris Logo downloaded from the internet. Recommended settings: PETG + Textured Surface + MMU3 27 tool changes for a total of 1:06 print time
I remixed this from https://www.thingiverse.com/thing:3108158 for my friends Polaris razor unfortunately the newer models have different style hubcaps (part# #1521128 for stock alloy wheels) fits these models Enjoy! This model features…
UPDATE: Polaris broke in another spot but this was still functional a year later with 3 hours of daily use.
End cap for the frame rails of a Polaris
Hey, that's a tool-free drain plug for the CVT cover of Polaris vehicles. If you ever need to drain water from the CVT quickly while out on the trail without any tools, this plug should come in handy. Replaces OEM parts: 5416606, 5454915…
The Polaris pool cleaners have three wheels with one driven wheel per side. This idler wheel rides between the two wheels on one side transferring power. It has raised edges that press against the tires and wear down over time. The…
Viofo CPL A119 A129 Polarisation filter holder If You broke your CPL filter holder you can print one.
A remix of the SmartThings Hub (Gen2) Wall Mount - Ports on Bottom by neonpolaris. When I sliced the model in S3D it was two objects and the print would have been very weak structurally. I repaired the model so it is only one piece now.…
Reverse camera relocation for Polaris Ranger with SuperATV bumper. This is a press on mount. No need to extend wires. Will note work with rear winch. I printed with PETG. Its a snug fit to the bumper, but you can add a layer of electrical…
These plugs prevent the Polaris Ranger door handles from accidentally getting pushed inadvertently opening the door. I printed this in PETG with 15% infill.
I'm not sure what skis this will fit other than the SL 750 but it will almost certainly fit the SL 650 I would imagine and probably the 780 if I had to guess. I printed this in 100% infill TPU but you could also probably use ABS or other…
Motivation I recently purchased a Polaris VRX iQ+ Robotic Pool Cleaner. It comes with a large control box that has no mounting screw holes on the back and can only mount to the provided non‑detachable caddy. We do not use the caddy and…
A simple end cap for Polaris swimming pool robots. It fits at the tip of the tail and allows to break the water flow rate. You can adapt original dark sponges on it if you want ! It's printed with PET filament made from plastic bottle :…
I took inspiration from this creator: https://www.printables.com/model/902693-polaris-lightbox And made it somewhat printable on printer without MMU or AMS Its slit in the middle so it can fit onto the print bed. But this brings another…
Coworker wanted a roof to match their actual RZR so I drew this up for them and printed it in PLA. .12 layer height with .4 nozzle with supports. First one was .2 layer height and lost a lot of detail.
JPG Design3D Washer for the flagholder found on various polaris models. The original holder has a pretty big hole. This washer is meant to adapt to smaler size screws. Print with 10+ perimeters and drill the hole the size you need. Inner…
Extends about 70mm past the ride plate, or around 110mm from the back of the hull and is tapered to the outside. To get the part for the other side just mirror the model in your slicer Print with hull side of trim tab on the bed with…
Ficha bibliográfica de Polaris (Lorna Dane) Datos básicos Campo Información Nombre real Dr. Lorna Sally Dane Alias / Nombre de código Polaris (principal), Pestilence, Malice (posesión), Magnetrix, M-2 / Magneto the Second, Polarity…
This is a little depth gauge you can clip on the vat to see how much resin is left in the vat. Handy to know if you can get that next print out of what is left in the vat.
Boost gauge pod for polaris rzr. May need longer bolts, mine came with the factory windshield and the bolts are longer. Will need extra nuts. Snug fit with the glowshift boost gauge
Steering pedestal compass might missing the cover. Over the time needle housing globe gets dim because of the weathering. Plastic polisher you can recover unit in few minutes, so you don't need to get new one. This cover might suit also…
English description below OnStep-Umbau für die Vixen Super-Polaris Montierung Für das großartige OnStep-Projekt von Howard Dutton https://onstep.groups.io/g/main Hier handelt es sich um eine Adaption für eine Vixen Super-Polaris…
an upgraded drive wheel for the polaris proride R/C snowmobile as the stock one does not engage very well due to poor design and is unable to handle more powerful motor/battery. this upgraded design of mine has the engagement fins…
This is a light box with the Polaris logo. Lights not needed can just be a logo box. Use a 12 in light strip to lay inside the box. Use a drop of superglue to secure the diffuser in place. You can scale the z height of the diffuser to…
This fit on the front of my 2025 Polaris Ranger bracket so that I can mount an LED light bar on front. Simple print. Uses a ¼" bolt for the light bar.
Field tested for nearly 3 years! Still working well underwater in either PLA or ABS. When an in-floor pop-up Caretaker 99 swimming pool cleaner no longer retracts and rotates, then the spring has probably corroded. Why spend $80-$100 on a…
I kept getting frustrated when i would go through water and the front windows would get fogged up from steam so I worked up this defogger system. This is good for one side only. This is small enough to have one for the driver and one for…
I couldn't find where I place a couple of Polaris Feed Hose Nuts and had to make a couple. Cheers Kisssys Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Replacement Parts
CLIP-SCREW #8/10 .03-.10 PANEL 1-001-933-505 (polaris number) A cracking latch (nut) of the Polaris front lamp. Pet-G Infill 100% Support Off Brim Off
Replaces cupholder with tweeter. The one pictured has a bigger base, but it's not necessary. https://www.amazon.com/dp/B002X786Y0?ref=cm_sw_r_cso_sms_apin_dp_105SZR1BNC17X3FK6G3P&social_share=cm_sw_r_cso_sms_apin_dp_105SZR1BNC17X3FK6G3P
Bought a pendulum clock from a car boot but it was missing 2 spindles, I modelled using existing ones from the top of the unit. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: Yes Resolution:…
I was taping the bubble level on Benro Polaris but kept coming off so I made a quick mount for it that can slide onto the astro plate. https://www.amazon.com/gp/product/B08XX48QBY/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Requires 5050 LED strip, 125v mini rocker switch, Wire and fuse holder. I used 2 part epoxy to hold the lens in place.
I designed this model as a replacement for brake fluid reservoir on our kids Polaris 200 EFI side-by-side. This part gets frequently broken and you cannot order an OEM spare - Polaris sells only whole kit with master cylinder that costs…
This goes along with the top mount LED bracket I made and the roll cage mounting brackets… I wanted to put the rear lights on the roll cage so I made a bracket to do it. There's two designs… the first one has a 5/16" bolt through the…
Repuesto para basculante delantero POLARIS 330
Tested on 2023 Polaris Slingshot SL series as a additional small storage bin that fits the center console of the Slingshot. It is easy to remove or keep in place and makes for a nice finish look for those of us who seldom use the CUP…
Designed using Autodesk Fusion. I printed with Anycubic Kobra neo 2. There is a face you are able to print from at that allows for less supports needed for parts of the print that are at an angle. I used callipers to take measurements of…
I needed to get the intake gaskets for a SL 750 and didn't want to spend the money on the gaskets since they aren't exposed to anything but air and mild heat. These need to be printed in TPU and should be all bottom and top layers with no…
I print this 3 color, Main switch plate is your base color, second color for the star, 3rd color for the text. Add ironing to the text for a super clean look.
To improve rear visibility in my Polaris Ranger, I created these custom mounts that extend the factory backup camera lower toward the ground and angle it backward for a clearer view. They reuse the original screws that secure the camera…
I have a 2007 Ranger Polaris that, when I acquired it, was missing a cup holder on the passenger side. I don't have a use for a cup holder, so I just made a cap to put in its place. Printed it out and snapped it in place. Fins on the…
Made this for use with the Berks Attachments rotary knob for their wiper delay kit for the Polaris Xpedition. I tried to use one of the blank plates already in the dash , but they were too flimsy. Printed in Bambu PETG-HF at .18 layer…
This is a kit to use the Polaris 180 wheel with ceramic 608 bearings. The bearings last longer and the Plastic screw that breaks off is replaced with a 10-24 1.5 in stainless screw. Requires you to print a new bracket to hold the wheel.…
got the steering wheel gauges and had a hole where the factory ones are. can use tablet as a radio with a dsp/bluetooth sound bar
Love my Corsair MM800 mouse pad, however occasionally my mouse cable would get hung up just enough to throw me off on the bump on the back. I designed this thing so the sides of the bump are more gradually sloped, preventing hangups from…
This is a plug/cover for CVT hot air outlet hose during cleaning of Polaris Scrambler S / Sportsman S. Because of the direction and location of the original outlet in these models it is easy to flood the CVT mechanism and the belt. Just…
This is a direct-fit replacement tailgate latch hook for the Polaris Ranger (OEM Part 5459101 ). The model is designed to match the original geometry and installs with no modification required. It can be used on either the left or right…
Krytka čtvercových a obdélníkových profilů na podvozku čtyřkolky Polaris jako zábrana proti vniknutí nečistot. KSL 521061
UPDATE I changed too many variables between my first print that works for now but cracked (pictured) and my second print. I had increased the inside diameter and the wall thickness of the model and the number of perimeters and infill of…
Hülse um Spiegel am Polaris lock and ride System anzubringen. Die Hülse in den Halter stecken, Spiegel durch stecken und unterhalt mit Unterlegscheibe festschrauben. Montageanleitungen und weitere Hinweise hier: jpgdesign3d.de
General Model and some print files for receiving satellite signal in L-Band at 1700 MHz and one Inmarsat at 1540 MHz. Other frequencies can be generated. Model is parametric and other frequencies can be generated directly in FreeCAD:…
This is a replacement clip that attaches to the main body hose on a Polaris 360 and lets you attach the Velcro from the cleaner bag. Unlike the original one that comes with the cleaner, the ring on this clip is oriented such that the…
You print this and embed three M4 nuts into it using soldering iron. Now you can tighten the mounting screws on your focuser full force like no tomorrow without bending the tube. This will remove play when mounting heavy eyepieces or DSLR…
