1 / 18
Polaris RZR 800 Rear LED Light Mounting Bracket — image 1
1 / 18

Polaris RZR 800 Rear LED Light Mounting Bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A bracket that attaches to the 1.75" roll cage and allows for rotation of LED Lights for a Polaris RZR

Rating
0 / 5
Likes
3
Downloads
25
Makes
0
Views
293
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This goes along with the top mount LED bracket I made and the roll cage mounting brackets… I wanted to put the rear lights on the roll cage so I made a bracket to do it.

There's two designs… the first one has a 5/16" bolt through the middle, the second the 5/16" bolt is offset.  I wanted to have some ability to turn the brackets and reposition them.  The first one I thought would be fine since I could set the angle of the lights up and down, or if I wanted to go side to side, I'd just rotate the whole bracket 90degrees.  I didn't like it, though, since i wanted more to be able to adjust up and down with the lights, and in doing so, the one light hung out the side of the RZR.  I was worried it would get clipped by a tree branch and pulled off.  So I made the second mount that was offset.  The first one also kind of bent in where the ¼-20 bolt holds the rotating light part to the center bracket, so I added some material around the teeth to straighten that out.  They're pretty solid.

I debated using the bracket with the lights that was curved and had some adjustability, but I didn't really think I'd be changing these all that much once I had them set initially.

I used the “fuzzy skin” feature in Prusa slicer to give some texture to the part of the bracket that mates with the roll cage bracket, the part where the 5/16 bolt goes through.  That way you can turn it all around and still get some good friction to hold it in place.

Tags