2,838 models
Coin/Key for European shopping cart. Form factor between 50 cent and 1 euro coin, compatible with most carts. Easy to put on a keychain and you can pull it out when the cart is unlocked with most systems. Just a simple and effective…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
This shopping cart chip is designed for shopping carts in the EU/Germany. The chip is made of durable material and has a special shape that fits perfectly into the slot of a shopping cart. The chip is easy to use - Just insert it into the…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
I've long been a big fan of the Keycappie by Romly, a great little figure that can house a an MX compatible mechanical keyboard switch right in his head. They're so cute that I couldn't resist the temptation to make one of my own. I'm not…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
1€ shopping cart chip with handle In my profile you can find some other variations of this chip Without writing https://www.prusaprinters.org/prints/9834-1-euro-shopping-cart-chip Without writing and lighter…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for PETGSource material: PET
Wrapping paper cutter for easy paper cutting. This is better than bothering with scissors. Model is programmed for a 9mm wide knife. →…
Print approx. €4.17–€5.10 excl. taxPreliminary estimate for one variant
Very useful, this key can be added to your keychain. So, no need to look for a coin anymore. Opens deposit locks without coins or tokens and can be removed immediately. Print settings: Default PETG 0.2mm, nozzle: 0.4mm
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for PETGSource material: PET
This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes. You may need to carefully break the hinges free after…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Kermit Sipping Tea The cup is empty so you could turn it into a Kermit Sipping Tea Key Holder.
Print approx. €6.43–€7.86 excl. taxPreliminary estimate for one variant
Unlock and Go! 🛒 The ultimate shopping hack. Insert, unlock, and remove - no more searching for change or leaving your keys hanging from the cart. Precise clone of the official manufacturer's key. Works perfectly with 1€ carts. Perfect…
Tired of not having coins to use the cart at your local supermarket? Your problems are over, leave these coins in your car, wallet, pocket or even with your keys and never have to juggle with your shopping again.
Shopping cart token. To use instead of 1 euro coin. Minimal design, convenient to use on a key ring.
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
Simple shopping cart token. Push the key directly into the cart, unlock it, then pull it to the side and pull it out. Jednoduchý žeton do nákupního košíku. Zatlačte žeton přímo do košíku, odemkněte jej, poté jej zatáhněte do strany a…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
If someone steals your cart, they will find as much as 0€ :) This is best to print 0€ side facing up. Looks best in two colours. 0,1 layer for best result. I printed it out of Pla on Prusa I3
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Eppendorf Tube Rack with Spring Mechanism Available sizes 2x16, 4x16, 6x16, 8x16 3x8, 4x8 3x6 Description Tube rack designed to hold your Eppis tightly with springs. I find this useful for storage of large collections of tubes, to avoid…
Print approx. €3.57–€4.36 excl. taxPreliminary estimate for one variant
1€ shopping cart chip with handle Here you can find some other variations of the shopping cart chip https://www.printables.com/de/social/19767-boogie/collections/141942
Removable Shopping Cart Coin: A Convenient Tool for Your Shopping Needs Product Description: The removable shopping cart coin is an essential tool for your everyday shopping trips. This cleverly designed keychain not only holds your keys…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Thanks to 3D Printy for the bobble models, and sb43201 for the original Santa Claus model that was remixed by so many others. The original Santa Claus can still be found on Thingiverse: https://www.thingiverse.com/thing:2702723 This took…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for one variant
1€ shopping cart chip with handle Here you can find some other variations of the shopping cart chip https://www.printables.com/de/social/19767-boogie/collections/141942
Small tip tray truck modeled off a Howo. printed with supports which are already in the 3mf.
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for one variant
Easy to make a Monkey clapping keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for one variant
1 Euro shopping cart chip Here you can find some other variations of the shopping cart chip https://www.printables.com/de/social/19767-boogie/collections/141942
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
1€ Coin with handle for shopping carts Here you can find some other variations of the shopping cart chip https://www.printables.com/de/social/19767-boogie/collections/141942
This small gadget will let you open most shopping carts for euro coins. To use in other countries, please scale (in all axis) to different size. I noticed there are many gadgets of this type, but I designed this one from scratch and…
Print approx. €0.06–€0.08 excl. taxPreliminary estimate for PETGSource material: PET
Remix of: https://www.thingiverse.com/thing:2808264
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
If you like my work, don't hesitate to support me by paying me a ☕ https://ko-fi.com/fred2u
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
25 Cent dummy for use with shopping carts. Meant to be kept on a key ring.
This is a special winter edition of the shopping cart coins. This is your ticket to use your shopping cart. You can keep the chip on your keychain, inside your pocket or in your car :) Or even better, you can hang the chips on your…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Simple and done in 15 mins. PLA is hard enough, but in the Time the Hole for the Keychain can break. Better use PETG, ABS or ASA.
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for one variant
A simple chip for shopping cards. Size is 25mm x2mm with btc simbol.
Shopping Basket with Screw Assembly – Practical, Sturdy, and Stackable This 3D-printable shopping basket is designed for everyday use and easy assembly. The construction is solid and functional – ideal for home, workshop, or office. 🔩…
Print approx. €1.20–€1.46 excl. taxPreliminary estimate for one variant
Hey there, Here I have some removable shopping cart chips. Just insert them proberly and remove 'em after your cart is freed from the chain. The initials on the blue one are customizable (Fusion 360), therefore donwload the .f3d document.…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Printed with PLA, PETG is allright as well. The clock module is 56x56x17mm. You can buy with different stick length. I have used 8-10mm but 5-7mm may be even better. The seconds hand seemes to be impossible to print so I have left it out.…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for one variant
Update: Widen the hole a bit, making it easier to mount the tootbrush. New version do not need any supports. Small head stand for standard electric toothbrush heads. Since the brushes tend to drip some leftover toothpaste, I included a…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
Dieser Einkaufswagen-Chip ist mit dem ikonischen Audi Logo verziert und hat die Größe eines 1-Euro-Stücks. Das Audi Logo, bestehend aus vier ineinander verschlungenen Ringen, ist in der Mitte des Chips zentriert. Der Chip wurde speziell…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Français en dessous :) __________________________________________ Here's a simple guide to allow you to easily tap M8x1.25 threads into the core of a 4040 Aluminum profile. This works perfectly with this kind of extruded profile:…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
Der Einkaufschip hat die Größe einer 1€ Münze.
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
This protective handle is an ideal protection when you go shopping. Thanks to the practical ring on the protective handle, you do not have to touch the shopping cart anymore. It is super easy to attach, just by easily pressing/attaching…
Print approx. €1.81–€2.21 excl. taxPreliminary estimate for one variant
Customize it with openSCAD. Experimented with the awesome openSCAD lib Round-Anything from Kurt Hutten. Print it face down with manual color change.
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for one variant
The original bag holder from the Renault ZOE is far from perfect. My hook ist simple & just to slide over the original holder. Printing ist easy, supports are optional. Die originale Taschenhalterung im Renault ZOE ist eher nicht…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
We're having trouble with family members tipping over on our IKEA Poang chairs. We've tried several things, including gentle reminders not to sit on the very edge of them, but nothing has worked. The Poang chairs do come with a little leg…
I needed a organizer for my Tapping tools in metric. All the rooms in the organizer is marked with raised numbers the hight is 1mm. The tapping tool organizer is for M3-M4-M5-M6-M7-M8-M10-M12. > Print materiel used: Sunlu Black PetG /…
Print approx. €8.44–€10.31 excl. taxPreliminary estimate for PETGSource material: PET
This is made to be accepted in Romanian Stores for the Shopping Karts Carts it has the same size as a 50 euro cents.
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
0.4 nozzle layer height of 0.15 density 20% the two coins need less than a meter of filament (exactly 80 centimeters) ________________________________________________ boquilla de 0,4 altura de capa de 0,15 densidad 20% las dos monedas…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
UPDATE: See my newer version that supports all three sizes in one device with a hinge. https://www.printables.com/model/1322380-super-deluxe-paracord-melting-whipping-form-melt-n Original version: This simple device allows you to melt the…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
This is an object that everyone uses at least once a week, it is small and requires only 63cm of filament to be printed at 100% infill. I have printed dozens of them for each friend who sooner or later is forced to go shopping, print it…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for PETGSource material: PET
Remix of the “Removable token for shopping cart (Request your coin in comments)” by VikKon only for the Australian Dollar (AUD). I have added a few logos on removable shopping cart coins to personalise for family and a few close friends…
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for PETGSource material: PET
Nr. 1: Infill 100% Nr. 2: keine Boden/Deckschichten 3 Perimeter Infill: Bienenwabe 30% (Honeycomb) Nr. 3: keine Boden/Deckschichten 3 Perimeter Infill: Stütz kubisch 50% (Support Cubic) Nr. 4: keine Boden/Deckschichten 3 Perimeter Infill:…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Einkaufchips die ich immer im Einkaufswagen stecken lasse, damit sich der Mensch nach mir im Supermarkt, darüber freut :-) Karmapunkte sammeln :-) 24.25 mm x 24.25 mm x 2.38 mm in der Größe eines 50ct Stückes.
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
This quil is designed in Fusion 360 and printed on Průša mini+. The quil is printed in 2 parts that can be assembled together. First part, the Quil Nib is a bit tricky and it must be printed with layer height of 0,05mm. It took me less…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
Work coin This needs to be on every desk in every office. Working coin toss. "To work or not to work" ... Don't you know? Flip a coin... Have a fun :-)
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
Items you need: 2 x “4mm x 30cm” paracord. *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). Super glue (for magnets). *If you do not have magnets, I have included a 3D printed…
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
Einkaufchips die ich immer im Einkaufswagen stecken lasse, damit sich der Mensch nach mir im Supermarkt, darüber freut:-) Karmapunkte sammeln :-) 24.25 mm x 24.25 mm x 2.37 mm in der Größe eines 50ct Stückes. Zweifarbig, Black / Orange,…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
I designed the carpet-holders for many cars of the Volkswagen Audi AG. The original parts are made out of PA6 Nylon. the prototypes in the pictures (see 1&2) are made out of PLA because i just wanted to see how they would fit. I will make…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for one variant
Shopping cart key. Push the key straight into the carriage, unlock and pull the key out again, it couldn't be easier.
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
Je to kolečko do nákupního vozíku s logem auta. It's a coin for a shopping cart with a car logo.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
A cleat I made to wrap the lines for my tarp, to make it fast to deploy and pack. It doubles as a tension device. To use it to tension the rope just pull the line through the big hole and around the ear, like pictured. Use the same method…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
As PrusaLink/PrusaConnect now supports USB Webcams, I've remixed Prusa's Raspberry Pi Zero frame for Einsy Rambo model to provide some protection for Waveshare's Ethernet/USB Hub pHat. The Waveshare pHat comes with brass spacers and some…
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
ECOVACS DEEBOT (X1 e OMNI) cleaning pads holder to store the mopping pads when you do not want to use them. You can simply slide the pads onto the hexagon posts and if you want to secure them even more in place you can add two 6x3mm…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
I was getting frustrated with the design of my previous stripping basket because a wave would hit me, fill my basket up with water and because of the lack of sufficient holes for water drainage, the basket would become heavy and weigh me…
Print approx. €7.82–€9.56 excl. taxPreliminary estimate for one variant
Doraz ke kleštím Knipex 1262180 , podobný originálu, trochu upravený pro lepší tisk. Materiál PLA ( mám lepší zkušenost než PET) tryska 0,4 vrstva 0,1 Menší trysku na vyzkoušení nemám. zkuste i s jiným nastavení a dejte mi vědět výsledek.…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
Simple solution to store Gift Wrapping Paper in a place where it doesn't take space away. A quick fix, nothing special. It ain't stupid if it works ;-) Printed with PLA.
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
//English + // Italian // English Parametric toolkit to generate any type of under cup or anti-tipping. It manages glasses, bottles, flasks and cans of any diameter and height, both circular and of other shapes (eg square or hexagonal or…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Wall Mount for iRobot Braava Jet m6 Mopping Pads
Print approx. €9.66–€11.81 excl. taxPreliminary estimate for one variant
Simple cat sliding on the wall.
Print approx. €1.17–€1.43 excl. taxPreliminary estimate for one variant
Just get my printfile and print 5 in 20 min for 13ct. Its a fun gadget to have and guarantees laughter
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Tired of jars, breaking glass, and spilled and spoiled staining reagent, we designed a universal dipping chamber for thin-layer chromatography! Three predefined models are provided: Synthesis Style: medium sized for 10x10 cm plates, with…
Print approx. €8.33–€10.18 excl. taxPreliminary estimate for one variant
Ther wrapping paper holder is designt for IKEA VITTSJÖ shelf. You need all three parts for one paper holder.
I created a Omamori Happiness Plate with a Japanese symbol for Happiness. I hope it brings Happiness to You :-) I took a one original symbol model by Jon from Printables and put in into my original Omamori Happiness Plate. The Omamori…
Handles for skipping rope The ball bearings on the handles of the skipping rope were rusty. Doubbel unders are no longer suitable for fast rope jumping. The 2.5mm thick rope can still be used. So decided to construckt a handle with a…
Print approx. €1.82–€2.23 excl. taxPreliminary estimate for one variant
Unlock your shopping cart in two different ways
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for one variant
The using indication can be seen in the photos. The parts aren't sticked together.
Print approx. €5.94–€7.26 excl. taxPreliminary estimate for one variant
This is a parametric Fusion 360 model to quickly generate a test object with specified hole diameter that decreases in steps of 0.1mm. Easy to find the right hole diameter for self tapping screws, bolts, inserts and/or press fit axles,…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
We needed a convenient way to store reusable shopping bags in the kitchen. I found a great model by Rixon Redd on Printables and modified it to be mounted with a 3M Command Indoor Picture Hanging Strips (Large) Pairs.
Print approx. €2.10–€2.57 excl. taxPreliminary estimate for PETGSource material: PET
Since the supplied magazine bottom from Mantis didn't fit my CobraMag(9mm), I designed this alternative bottom piece. I added a picatinny rail so I can mount my mantis to these magazines. It was designed to fit a 9mm 1911 CobraMag and…
Print approx. €0.43–€0.52 excl. taxPreliminary estimate for one variant
Wrapping paper holder - right and left consoles two versions Scale it according your needs. I made screw holes blind so you may decide how to work with it more freely. If you need to use them, just drill a hole through or use self-tapping…
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
I wanted to disguise some gift cards the wife was giving this past Christmas. A way to wrap them without putting them in something like a box (but it looks like a box). I printed it in PETG because that's what I had loaded but it should…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for PETGSource material: PET
Handles for skipping rope hexagon The ball bearings on the handles of the skipping rope were rusty. Doubbel unders are no longer suitable for fast rope jumping. The 2.5mm thick rope can still be used. So decided to construckt a handle…
Print approx. €1.75–€2.14 excl. taxPreliminary estimate for PETGSource material: PET
The cream cheese cups are often more informative then beautiful. Put the cup into the cover and you have a nice object on the table. There are so many different sizes of packaging (shape and height). My first cover fits perfectly for some…
Print approx. €1.87–€2.29 excl. taxPreliminary estimate for PETGSource material: PET
Designed for 0.15 mm layer height with 15 layers. The bgcode-file and the 3mf-file have included filament change stops at layers 3, 8, and 14. Thus you can use 4 different colours.
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
The source marked this model as adult content.
Print approx. €3.30–€4.03 excl. taxPreliminary estimate for one variant
The AMD processors come in a thin plastic carrier that was originally packaged inside a larger cardboard container that also holds the Wraith fan. However the CPUs are often sold without the fan, and the plastic isn't safe to mail without…
Print approx. €2.09–€2.55 excl. taxPreliminary estimate for one variant
Tool support
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
I am sure this can be even more refined but it works amazingly. It is a fishing gadget. The box version prints better but does well enough with the rounded edges. You put the line through the middle hole then tie it to the cork when you…
Print approx. €2.23–€2.72 excl. taxPreliminary estimate for one variant
I was thinking of this lil gadget from the Bill Hodges/Holly Gibney series of books by Stephen King the other day and thought why not. The Zappit Commander is produced by Zappit Inc. owned by the now bankrupt Sunshine Solutions. The…
Hi There. Some time ago I was looking for a model of a shipping container with a sliding cover, but couldn't find any I liked, so y made one myself. The print you can see is at 60% scale of de model. Anyway, I made the model in Fusion 360…
Update 19-Nov-2024 : Added IL version Update 02-Apr-2024 : Added CZ version A removable trolley coin for EU/US/CA/AU/UK/CZ/PL/IL carts. This allows you to remove the coin after unlocking the trolley for your shopping. Although there are…
Currency Units Included: EU USA CAN AUS GB CHN STEP files included if you need other diameters
Wrapping Paper Cutter Makes cutting paper for the holidays super easy and painless. Requires (1) #11 Exacto Blade -PLA works great -20% infill -may need support for the one overhand depending on your printer Credit for the model goes to…
Easy to print, easy to use. Always ready. Prepared EU tokens with many logos - car brands, PrusaSlicer and Printables logo, animal themes and other symbols, but almost any logo can be used by modifying a empty one. Now available update…
Shopping cart chip the size of a 1€ coin
The source marked this model as adult content.
Remixed (from scratch) for a standard, X-ACTO #11 blade. See here for a minimal version... https://www.thingiverse.com/thing:3183256 Print Settings Printer Brand: XYZprinting Rafts: Doesn't Matter Supports: No Notes: Designed for 0.4mm…
Simple yet very useful shopping cart key. I've already printed a lot of them for my family and friends. You no longer need to carry coins to take your cart ;). The key is as big as a normal key, just add it on the ring. Push the key…
Update 1: fixed jaw files were not included, added now. A project ive been working on for some time, the model 301 Tapping Arm is a mostly printed tool to help with tapping. For the past 8 months its been my entire tapping setup,…
Shopping-Cart Coin Simply insert it into the slot, release the shopping cart and pull it out again. Corresponds to the size of a 1 euro coin. Einkaufswagen-Chip für alle Einkaufswagen ohne Schublade Einfach reinstecken, Wagen lösen und…
I don't know what possessed me to make my own, when there are thousands of others available (count them!). Removable tokens such as this one can just live on your key ring until needed and never get misplaced. I can't call this a remix,…
US Quarter Size Shopping Cart Token / Coin Reusable / Removable Key Ring Attachable For supermarket shopping carts... Aldi etc. Customized version of http://www.thingiverse.com/thing:93346 Created with Customizer!…
A removable token for a shopping cart. I will make more if requested. Printer brand: Creality Printer: Ender 3 S1 Pro Rafts: No Supports: No Resolution: .2 Infill: WHATEVER Filament brand: WHATEVER Filament color: WHATEVER Filament…
Lucky charm gift for New Year's Eve with a function! The coin included in the horseshoe clip for the keychain can be used as a token for any shopping cart. On the coin is on one side a shamrock on the other side the number 26 for 2026…
