Counting matching models…
It's just a bit of fun. I have designed and printed a pair of glasses frames to suit my glass's lens shape in clear PETG Prusament. I have attached the part models of the frames and arms in a STEP format if anyone would like to customise…
video link: I wanted to have custom made prescription lenses the same size as quest3 lenses instead of using the typical Zenni ones. Also, having a non round shape guarantees that the angle will be perfectly aligned for astigmatism. The…
Various Gridfinity organizers for standard 1.25" pill bottles (33mm holes), 1.5" pill bottles (39mm holes), and 2" pill bottles (51mm holes) from Walgreens, CVS, etc.
You may need to heat up the camera mounts so you can bend it to make the camera fit easier. A little late to mention but the camera mounts fit my 160 FOV cameras, its a tight fit, I'm not sure of the compatibility with 130 FOV cameras.
This is a cheaper alternative if you need to wear prescription lenses with your Nreal Air glasses. I was able to use an old pair of frameless glasses and removing the legs created a clip on that will hold the bridge of the glasses and…
Gridfinity prescription organizers. Comes in three sizes 1in, 1.25in and 2in. There may be other sizes, but these are the bottles I had to model from. Basically does what it says on the tin-- helps keep prescription bottles organized when…
The beta version of HP Reverb G2 prescription lens adaptor. I'm opening up the models for users to try out the three thicknesses. You'd need to order a pair of glasses from Zenni. Make sure the IPD is set to 65mm even if your IPD is…
Short Gridfinity compatible prescription bottle holder. Could be a bit bigger. Might make a taller version later.
Update 01-18-23 Wide faceplate added! Update 01-17-23 I rebuilt the model from the ground up and improved it further. Added the step file for those who wish to make changes. Coming soon: Wide Faceplate version! Update 01-16-23 I replaced…
All VR lens adapters out there have lens attached completely flat. Actual eye glasses mount lens at a slight angle forming a curved surface. For me, the flat mounted lens cause my peripheral vision to be distorted (straight lines look…
Because the Crystal Super micro-OLED and Dream Air use pancake lenses (coupled with Sony micro-OLED panels), users cannot wear glasses inside the headset. As such, we want to open the STP file of both the lens frame and the lens itself.…
Remixed the original design by Knerdler to allow for any generic frame glasses to be mounted with some vertical adjustability. Recommend printing the frame with a black material to reduce internal reflections, I used both PLA and PETG and…
I made this cause I got tired of moving all my pill bottles around…
I decided to try and make a rack to hold standard sized prescription bottles since I have a lot of empty ones I use for parts and such. This particular first run will include the five bottle version, but that can only be printed on a…
I've used the Q3 lens adapter template v2 and added the correct interface for the Ficep Quest 2 lenses. Needs 3x1mm magnets, 6€ on amazon for 100pcs. Printed on Ender 3 in PLA, layer 0.12, 0.4 nozzle, 0.3 line width. For right side mirror…
print settings: PLA or PET-G 0.4mm line width 0.2 layer height 50%infill 2 top/bottom layer 2 perimeter no support the hinge just snap in place, engage the left side first and slide the right side from under up until it click in place,…
* UPDATED * After feedback, I now know where the eye tracking in the headset is and have updated these in order NOT to block the eye tracking. I just tested these on my unit and can confirming that eye tracking is working now. I took some…
My poor dog needs various medication. Made an organizer for all of it. Hole size from left to right. 26, 26, 32.3, 35, 35. small hole for syringe is 11mm I can quickly change the size if anyone needs it. May 24, 2023 add big syringe…
My wife is a pharmacist and wanted a small tray to hold prescriptions or a prescription pad at work, so I designed this tray to hold them. The prescriptions are 4.25" wide and 5.5" long. Will also fit 4" x 5" prescriptions. I initially…
Family member is having some issues with joint pain in their hands. I keep forgetting to mention it at the pharmacy, so we keep getting prescription pill bottles that are child proof. This just snaps into the bottle – by default a bottle…
The frames on my virtuclear quest 2 frames broke so I modeled new ones! Where I bought the prescription lenses:…
Upgraded from a pair of XREAL Air 2 Pros to the XREAL One, but already had a prescription lens made from HONSVR, and didn't want to buy another or wait a few weeks. Found some from a site called InfinityOne, but their shipping times and…
One of my cats has an illness that means he must eat only Hills Science Diet Prescription food. This is for the small tins, each tin has 4 meals in it and needs a lid or it goes dry and hard. I have another I made for the larger tin,…
Take your VROptician Valve Index prescription lenses, pop out the lenses and push them into the new Steam Frame adapter. Print 1 left and just mirror on the X-Axis in your slicer for the right side. I printed mine in PLA and it they work…
Unlike designs that attempt to divide the bottle into days of the week, you can easily pour out your pills as needed without having to slide the entire insert in and out. The rotating top with an opening allows you to select which side to…
Very simple design, just use double sided tape to stick it onto the existing lenses. Lightly will block eye tracking so moreso a temporary solution for now, but it's possible eye tracking will still work. Lenses:…
I wanted to make it easier for me to show someone who doesn't have the same vision as me items on the Rift. This also allows me to switch from my prescription to my wife's prescription easily. I took jegstad 's design and thickened the…
Overview If you wear glasses and like to ski or snowboard, you know how difficult it is to do both at once. Over-glasses goggles exist, but are often still awkward to use. I searched for a good option to hold an armless pair of glasses…
This is a remix of just the lens adapter from the project below. The base fit my 5x1.75mm (sold as 5x2mm) magnets perfectly without any glue, but the adapters had a much larger tolerance. This model brings them down to the same diameter…
this is a parametric tray measure the bottle diameter and number width and length. there is also a parameter for tray height
I love the Oculus Quest/Quest 2 magnetic prescription lens adapter by Robin Engström . But when not in use, they just sat on the table getting knocked about. I thought it would be cool to store them back inside the otherwise-unused case…
The BetaFPV VR03 face hole is too narrow to work with all or most glasses. It is feasible to grind down old glasses lenses using a padded clamp and a sander with 80 grit paper. The original model was based on the observation that a small…
Separate to left and right eye mount for ease of uploading to online 3D printing services.
I previously owned a Valve Index and had purchased prescription glasses from vroptician. Later, I switched to Vive Pro. This adapter replaces the lens holder to make it fit in the Vive Pro lens socket. I'm not sure if it works for any…
This is a prescription lens mount for the Fatshark HDO2. If the focus power adjustment in the goggles is not enough to help you see a clear image, you are like me and need special prescription lenses to see clearly. Such as those with…
Just a very simple labelled container for my prescription drugs.
I use this to mount old CVS precription bottles onto my pegboard. I use these bottles to organize small parts. Part of my modular peg board mounting system. Category: Organization
Because the Dream Air SE uses pancake lenses, many users cannot wear glasses inside the headset. As such, we want to open the STP file of both the lens frame and the lens itself.
Two bottle shelf for standard prescription bottles. Pretty simple, needed a shelf for two pill bottles. You may need to drill out or change the screw hole size to match your screws. Print Settings Printer Brand: Wanhao Printer: Wanhao…
Prescription Bottle Cookie Cutter. If you found this useful, please donate what you think it is worth to my paypal.me to help cover the time of design. Thanks, Enjoy! Print Settings Printer: BIBO Rafts: No Supports: No Resolution: 150 um…
I own both a Valve Index and an Oculus Quest. I previously owned a Rift CV1 so I have VR Lens Lab prescription lenses, but they don't fit either of my current headsets. These magnetic adapters allows me to swap the lenses easily. Remixed…
This print is symmetrical, so you can use the same print for both the left and right eyes. Note the tolerances on this are tight and you may need to adjust it slightly to get in between “lens rattles inside” and “lens won't fit in”.
For the two people who own both the Magic Leap One, Bigscreen Beyond, and are blind enough to need prescription lenses. Just a simple model to allow the Bigscreen Beyond lenses to fit over top of the Magic Leap 1 optics. This model…
This eye dropper retainer is designed for those that need to take two types of eye drops, one in the AM and both in the PM. I place the eye drop containers in the holes marked either ODD or EVEN, based on the day of the month. On an Even…
Be aware that it only accounts for lenses about 4mm thick in total, and the fit is very snug. I included a step file for you to adjust if needed
I made these for my prescription eye drops. The two black holders are for four bottles. Since then, one more bottle has been added, and I went to the white press in holders. The bottles can be picked up with the stand attached and still…
These inserts let you fit the FatShark-sized/DIY prescription lenses onto the stock HDZero faceplate! Specifically, it takes the actual lens part of e.g. FatShark lenses. If you previously used this print of mine that takes the complete…
Based on the GearVR v3.3 adapter, it allows you to use your prescription lens inserts purchased from VR Wave ( vr-wave.store ) with the GearVR lenses without modifying the inserts. The original adapter sticks out enough that it prevents…
If you use this for regulated prescription pills, consider that it is not part of the child-safe feature. Use only at your own risk. I printed 0.20mm layers in transparent PCTG with 3 walls and tree supports.
This is a replacement frame for the prescription lens inserts that you can buy via the HDZero website. Somehow the tabs on mine broke off while my goggles were in their case. I couldn't find an easy replacement so I modeled one. Note that…
On busy days, I would often lose track of whether I'd taken my daily prescriptions. This organizar/tracker prevents that. There are 4 versions, holding 2-5 standard-size prescription bottles (39mm diam, 71mm tall), and a rotating dial…
I built this to keep track of my daily meds, but it also got put to work holding all the spare fasteners that I had left over after building my Prusa MK4, MMU3 and the Prusa enclosure (and stuff in the spare parts kit too). Each unit has…
This is a remix of Jonathan Mayer's excellent TPU prescription lens holders remixed to hold the 44mm round lenses from Zenni Optical. I know a lot of people (including myself) already have these lenses sitting around from other VR headset…
A custom mounting solution for those using Zenni prescription lenses on their Meta Quest 3, but want to use EyetrackVR's v5 LEDs. I haven't seen one made, so I suppose that I had to do it. You will need the cooling face pad interface…
IKEA Skadis Glue Stick holder for 30mm / 40 gram glue sticks. Can also hold prescription bottles for the storage of miscellaneous items or medication. Never lose your glue stick for school projects and keep your important medication…
This part provides a firm base to press against to more easily activate the injector pen while also maintaining a 90 degree angle to the site. Be sure to properly sterilize the part for each use.
These inserts let you fit the FatShark-sized/DIY prescription lenses onto the goggles! Lenses should be sized or cut to 24.5 × 17.7 mm. Print with the clips facing up, with support for the lens insert area. Pop the frame over the display.…
Use your existing Valve Index prescription lenses from VR Optician in the Valve Steam Frame. Take the lenses out of their Index holders, put them into this adapter and clip it onto the Frame’s lens module. This is the rigid version of my…
For those that couldn't get Play for Dream to manufacture prescription lenses for you here are press on adapters that use Zenni SKU #550021 for lenses. IF they don't stay on (which mine have not had any issues) you could use a small piece…
This adapter allows standard prescription lenses to be installed inside a full-face snorkeling mask, providing a simple and low-cost solution for users who need vision correction while snorkeling. The frame securely holds a pair of…
You may need to heat up the camera mounts so you can bend it to make the camera fit easier. A little late to mention but the camera mounts fit my 160 FOV cameras, its a tight fit, I'm not sure of the compatibility with 130 FOV cameras.
I made these for my prescription eye drops. The two black holders are for four bottles. Since then, one more bottle has been added, and I went to the white press in holders. The bottles can be picked up with the stand attached and still…
On busy days, I would often lose track of whether I'd taken my daily prescriptions. This organizar/tracker prevents that. There are 4 versions, holding 2-5 standard-size prescription bottles (39mm diam, 71mm tall), and a rotating dial…
These inserts let you fit the FatShark-sized/DIY prescription lenses onto the goggles! Lenses should be sized or cut to 24.5 × 17.7 mm. Print with the clips facing up, with support for the lens insert area. Pop the frame over the display.…
