Counting matching models…
This remix from pixelauthor's SN30Pro+ Trigger plate. pixelauthor's version has a profile that allows the same trigger plate to be instaled on both left and right R2 button. However the one downside is the trigger plate profile does not…
Compatible with 8bitdo SN30pro and Pro2. Possibly compatible with other 8bitdo controllers
Die originale Seitenradabdeckung und den Reflektor vorsichtig endfernen. Den Reflektor kann man mit einen Schraubendreher entfernen. Dazu ist links an der Seitenabdeckung eine kleine Öffnung. Die Seitenradabdeckung kann man mit einen 3er…
I Realy Love The model from Pirateln3D an i Realy Love the Apple AirTag. But if you Put the AirTag inside the scooter, it will not work. The metal Blocks the Airtag. If you make a special case for the AirTag, anyone will see it and can…
Print Settings Printer Brand: Anycubic Printer: Anycubic I3 Mega Rafts: No Supports: No Resolution: 100 Infill: 10 Filament: Doesn`t matter something clear would be best Notes: Category: Sport & Outdoors
I remixed the “Filler” spool holder to a compact form factor that was drop-in compatible with the Raise3d Pro2 and Pro2Plus machines. The stock spool holders on the Raise3d Pro2 machines were plastic semi-cylinders. Over the course of…
Just another charger Wallmount I like to train my skills by desinging my own Parts, even if there are much to download for free. Feel free to try it out =) Printed in PLA and bigger diameter nozzle, its just hanging in my celler
I bought the new Insta360 Ace Pro 2 and I noticed that you can't turn it on or start recording if you're wearing snow gloves, so I thought I'd design this simple trigger that allows you to use it comfortably without taking off your…
I was not sure if protectors designed for M365 will also fit for my 1S, so I designed my own one. If printed with transparent TPU you can still see the display and press the button without removing the protector. I have included the…
Xiaomi M365 / Pro2 rear fender for 10 inch, 8cm wide tire Printed on Creality k1 max (300x300 bed) Slicer will ask to rescale it at first but select no, and rearange the part to fit the bed. Printed at 0.4 mm nozzle PLA (Abs recomended)…
I designed this for my Neoteck DTI Electronic Digital Dial Indicator . Other brands should work too. It is best printed without supports with the front side down. I printed mine with a 0.6mm nozzle with three perimeters and a 15% infill.…
Sport front mudguard for all Xiaomi models of electric scooter.
Just changed wall anchor to fit hexagon wall
Secure charger case for Xiaomi M365, M365Pro, Pro2, Essential, 1S, Scooter, Scooter. Design intended to be suspended on the handlebar (handle, axis or bell). If the charger is to be put in a place of passage, install the charger after…
This is a 79mm Spool Holder that can support FormFutura 1kg spool and permit to close the door for the Raise 3D Pro2. I printed it using the Raise3D with ABS at 0.2, infill 30% Remix of…
Do you intend on safely transporting your Raise3D N1, N2, Pro2, and/or Pro3 series printer and do not want your printhead to slide around freely (which could damage the electronics like the motion controller board, touchscreen computer,…
This isn't something to print it's an STL representation of an Raise3D pro2 Plus bed to go into the machine properties in Simplify 3D (e.g. Options -> Machine -> Add, select this STL)
The knob on my Iwatani PRO2 broke, so I designed and printed a better one. I printed in ASA, with multicolor for the direction arrows I would recommend printing in ASA or better, as the part can get hot (not in direct contact with flame…
DE: EDIT: V2 Online, liegt jetzt besser an der Lenkstange an. Ein einfacher Bremscheibenschloss-Halter für einen Xiaomi 1S E-Scooter. Wird einfach mit den zwei original Schauben vom Lenker mit festgeschraubt. . . . . EN: EDIT: V2 Online,…
This is a 20s3p 21700 cell holder for the Xiaomi Pro2, which can be screwed onto the original mounting points. This has already been printed and is in use. I have printed the old version out of ASA-CF. A newer version is included, which…
Eine Transportbox für das OXVA Xlim Pro2 Gerät und zwei Pods. Die Maserung der Holz-Oberfläche kann mit MMU angemalt werden.Kann ohne support gedruckt werden. Habe schon verschiedene Materialien ausprobiert. Funktioniert auch gut mit…
Here is the Xiaomi Pro2 spacer with 35mm, which can comfortably accommodate a 20s3p 21700 battery pack + Vesc. An appropriate screwable cell holder is included in the profile. The BMS should have a maximum thickness of 15mm; we recommend…
The netool.io pro2 is awesome. It has one fatal flaw though. When I store it in my bag to carry around, the power button gets pressed, and runs the battery down. This case was designed by me in an attempt to fix that. It provides a slip…
Astro focuser with small stepper motor 28BYJ-48 or MP35EA Focuser is compatible for my EAF holder: (as ZWO EAF replacement) SCT Newton Samyang 135mm ED TS 76EDPH (Sharpstar) Wiring diagram and PCB 1.0 on EasyEDA Wiring diagram for smdPCB…
The lens cover on my Logitech PTZ camera disappeared, so I had to get to work. The measurements are 65.2mm X 20mm. -Need support
Dieses Tool entstand daraus das man die Montagehöhe ändern kann, falls man ein Gepäckträger oder ähnliches verbaut hat und dadurch der Haken nicht nutzbar wird. Durch das Remix ist die Höhe variabel. Gedruckt auf ein Ender3v2 mit PETG,…
Version 1 mit Gewindeeinsatz M3 Version 2 mit M3 Muttern Der Bügelschlosshalter ist für den E-Scooter Xiaomi Pro2. Da der originale Schlosshalter nicht passt. Das Bügelschloss findet man bei Amazon.…
There was several times that the thumbscrews securing the print bed would become locked up after printing…even after cycling the bed temperature through various temperature ranges. I modified the screw cover to provide a little more…
The Ring doorbell wedge that is paired with the original doorbell camera was too steep of an angle for my liking. Decided to model my own version with less of an aggressive angle. THIS MODEL WILL ONLY WORK FOR (Pro & Pro2 Models WIRED…
I loved the design from imurfathersimba, but unfortunately, the iPhone 13 mini did not fit on it cause of the camera bump distance. So I used some design cues and redesigned it to fit my needs. I also added a spot at the bottom to hold…
Meijia case inserts for the DJI RC-Pro2 controller. Printed in two parts, the upper insert fits the controller perfectly, with or without neckstrap fitted, and includes finger slots to allow for easy removal of the controller, while the…
"why another filament holder???" Answer: "because most are difficult to print and/or not strong enough and/or do not fit the Flashforge Creator Pro" So here is a filament spool holder that can work on its own, due to a standard M4 hole…
I previously added a BOFA Print Pro 2 to manage filtered exhaust from the upper back panel of the EnXLosure. I then decided I'm wasting warmed air and decided to recirculate the filtered air back into the EnXLosure to help maintain temps.…
Printed with 0,4mm Nozzle PETG
I did this with what I had at home This is the first version diy led strip holder for M365 pro2 need: HARDWARE: bl-5j battery Wire,solder..... led strip (5m-60-ip67) :…
This is an adapter and brackets for an Evostar 72ED. I have included the Fusion360 files. I use a 3mm grub screw to fold the GT2 6mm belt on. I used a 180mm length belt but a little shorter would be better if you can find it. The stepper…
Screen cover for the DJI RC Pro2 drone controller, best printed in TPU, it should be a snug fit without being too tight.
La sede del C-tek è un pò più grande in modo da poter eventualmente applicare una guaina all'interno
Designed to ensure smooth docking* and undocking of the controller. I use this mounted to HSW so if used standalone you may need to adjust the model. If using USB-C cable then additional cable cover is required for the bottom. Print…
Waste tray for catching unused extruded filament
Convert the oval inlets/outlets on a Venmar Pro225 unit to regular 6" ducting, to avoid having to awkwardly stretch ducting into an oval shape. Each adapter requires 2x m3 hex nuts and bolts to secure the two halves together. This is…
Separating the mounting plate makes the part easier to print and easier to remove from the wall. The 64 controller Lip gets the job done, nothing fancy.
Rubber feet for the Napoleon TravelQ PRO285. Print in TPU.
Old bike was stolen, so the original mount was missing.
Design Concept The OXVA XLIM Pro 2 vape accessories stand is designed with convenience and organization in mind. It provides a tailored spot for vape enthusiasts to keep their essentials in check, ensuring everything is easily accessible.…
Still a work in progress! I ran out of time because I'm off to the Nova Rock Festival—so the 3D parts and electronics are still incomplete and untested! If you're at the Nova Rock Festival too, feel free to send me a DM—I'd love to meet…
Printed on Ender3v3+ CoPrint with Creality PLA Silk Silver. Layer Height: 0.2mm Infill: 15% Walls 3 Top & Bottom: 3
Pour utiliser, il suffit d'imprimer et vérifier que la hauteur des ronds est bien de 1mm
Poignée pour le cric Rassant HDPRO2T/ Handle for Jack floor Rassant HDPRO2T Print Settings Printer Brand: Prusa Printer: i3 MK4 Rafts: No Supports: No Infill: 100 Filament Material: TPU Category: Parts
Useful item to use your tectectec xpro02 as a dashcam. Sphere ball 17mm insert adapter for tectectec xpro 02. Impossible to find the right accessory to use your xpro02 as a dashcam even though there is a function for it in the camera menu…
Au lieu d'un support en nid d'abeille. Il y a plusieurs triangles pour se fixer sur la grille des boitiers Corsair 4000D Airflow et Corsair 5000D Airflow. Le support rentre pile poil dans la grille, aucun jeu.
I loved the design from imurfathersimba, but unfortunately, the iPhone 13 mini did not fit on it cause of the camera bump distance. So I used some design cues and redesigned it to fit my needs. I also added a spot at the bottom to hold…
This is a mod to change the original part cooling fans from the Raise3D Pro2 to using blower style 4010 which provide much, much more cooling power. I used the DragonBurner V8 design and made a few cuts and adjustments to it would fit the…
Useful item to use your tectectec xpro02 as a dashcam. Sphere ball 17mm insert adapter for tectectec xpro 02. Impossible to find the right accessory to use your xpro02 as a dashcam even though there is a function for it in the camera menu…
Design Concept The OXVA XLIM Pro 2 vape accessories stand is designed with convenience and organization in mind. It provides a tailored spot for vape enthusiasts to keep their essentials in check, ensuring everything is easily accessible.…
Magsafe iPhone and Airpods Pro2 Dock - Mount for openGrid Multiconnect - Swivel Charging works for Airpods2+ Case in vertical position and even iPhone 13mini which has camera lenses near the magsafe magnet ring. It fits for 2nd gen…
Printed on Ender3v3+ CoPrint with Creality PLA Silk Silver. Layer Height: 0.2mm Infill: 15% Walls 3 Top & Bottom: 3
This is a mod to change the original part cooling fans from the Raise3D Pro2 to using blower style 4010 which provide much, much more cooling power. I used the DragonBurner V8 design and made a few cuts and adjustments to it would fit the…
I wanted to have a standing holder for my 8bitdo pro2 controller, couldn't find one I liked so I made my own. Print instructions : I printed this with a .4 nozzle on .2mm height 4 walls, 15% infill. Assembly instructions : Maybe use some…
Magsafe iPhone and Airpods Pro2 Dock - Mount for openGrid Multiconnect - Swivel Charging works for Airpods2+ Case in vertical position and even iPhone 13mini which has camera lenses near the magsafe magnet ring. It fits for 2nd gen…
Print in place hinge needs some high levels of precision from your printer, there is only 0.2mm of gap, Magnets for these are small 3mmx5mm cylinder magnets. They are usually sold in packs of more than 50 on retailers like Amazon , ebay,…
