Counting matching models…
I modified the Barbie Doll Shoes I created previously. Its more sharp, the sole is less rounder and more surface area for the heel for better bed adherence. It has been approved by my granddaughter quality control department.
Description: These are adapters for Submersible pumps. 2 have odd sizes which fit my cheap Amazon pumps Printables wouldn't allow me to have the “.” in .526 (meaning ½") in the file name. So if your curious what 526 means. thats why. I…
As the original author stated, this is not for use in loops . This is for keeping your gear clean and protected in storage.
I needed a way to use a bike pump to inflate an air mattress. So I made a conical adapter to a Schrader valve (normal car or bike tire stem). I used ninjaflex to get a better seal but I am guessing pla or petg would work well too since…
The open-source syringe pump is a standard research instrument for use in microfluidics and several other laboratory workflows. There are numerous designs available in the realm of open-source syringe pumps. We have combined some of the…
Refine and fill your gaming sessions with MORE SCATTER! Enjoy!
I designed this box to use it for a DIY dosing pump. I used this guide (https://www.joy-reef.com/en/dosing-pump-diy-part-1-hardware/) to buy all of the neccesary components. The only problem was, that I did not want to have this ESP…
It just increases the angle at which the string is getting pushed into the catch, if you happen to have issues with that.
This is a holder to attach an airpump to any Marolex Ergo pumpsprayer, turning it into an automatic spayer for less than 50€. Drill a 10mm hole into the tank, then screw in an aircompressor fitting with an integrated seal like this one:…
I created these to combine male/nipple 1.5 inch camlock fittings with 1 inch, 1.25 inch, 1.5 inch male NPT threaded and also 1.25 inch female NPT threaded fittings, as well as 1.5 inch barb. This is so I can quickly connect and disconnect…
Discontinue Double Posting ==== ==== I will discontinue double posting the models to Printables and MakerWorld because it became frustrating, with the unstable Printables' content editor... Please search for my new models in MakerWorld.…
Petrol Station and Pumps for N Gauge model railway for my Model Railway with a roof for the station and a roof for the pumps
This diffuser can be used with any air pump to supply oxygen or decorative bubbles in your aquarium. Ready to use with air hose 4/6 mm The best thing is that you can use cotton rounds eye makeup remover pads to renew the filter, which are…
The stock supplied heads where kind of boring and in black plastic which blocked the LEDs that where supplied with my pump. This design spreads the water in an interesting pattern and lets the LEDs light up the water streams much better…
Depending on the configuration of your printer, you should test the model by turning 180° and generate a partial print of both ends. This is a good way of finding out whether the dimensions fit exactly.
Lost the cap for your mini bike , bicycle , or cycle hand pump? This 3D printed replacement cap is designed to fit mini pumps sold under the Comus and Beto brands — popular among cyclists worldwide. It may work with other brand names too…
Folgende Komponenten wurden zusätzlich verwendet: Filtermatte:…
I made it as a nozzle for a cheap hand vacuum pump with ¾" female thread. I use this pump with this adapter to remove the excess of air from plastic bags to protect filament spools from moisture. I printed it with 16mm outer diameter as…
1/2" Barbed adapter for cheap Submersible Pumps
Hijinx+: Replacement pump assembly and plunger to extend the draw of the Lynx near/past the limit of what k25 can do. Will likely cause k25 to settle a little from the additional compression, but most blasters push beyond the elastic…
This is a adapter to inflate your alpacka raft floor/seat/footbrace with your included pumpsack. The adapter fits snug on the nozzle and locks in place. Make sure to push it all the way on. Material: TPU Weight: ~ 1.7 g Use the pumpsack…
This is a adapter to inflate a BigAgnes/Thermarest (WingLock) sleeping pad with a Alpacka Raft Pumpsack. Less than two full pumps are needed to inflate a 25x72 BigAgnes Rapide SL for reference. Material: TPU Infill: 100% Scale: 100,6% on…
designed to hold the 2.3x1.25 ac to dc power bricks common to computers & other electronics. Offset plug space on bottom of bracket (possible able to hold center mount plugs if inserted power cord end up - YMMV) Made the bracket well…
NOTE: Labeled models available on my MakerWorld: https://makerworld.com/en/models/412523 Description Meet the fully modular dispenser! It can be mounted on walls or placed on countertops, and offers a much more premium and clean feel as…
For years, I’ve been using a submersible aquarium pump to flush my CPAP hoses by connecting them to the pump and immersing them in a cleaning solution. I leave them there for about 12 minutes. Now, I’ve designed an adapter that makes…
I wanted to use the pool skimmer hack but found that the pressure coming from the OG jet was to low... We are using a small filter that doesn't have much pressure so the jet is redesigned to give more flow to the water so the skimmer can…
I decided to make a water aerator that uses water pressure to draw in air, the water enters in the bottom chamber and exits through two vents, in the process it pulls in air from the upper chamber. This way you don't need a noisy air…
Zodiac Valve Adapter for SUP Pumps This 3D‑printed adapter allows you to inflate older Zodiac inflatable boat valves using any standard SUP pump . It fits securely into the classic Zodiac valve system and provides a reliable seal for…
I designed this model as a compact version of my other Kite Pump Organizer, specifically for smaller pumps where the hose wraps four times around the pump body. The organizer is secured in place with a zip tie. Most existing organizers…
Krytka pro vysoušecí filtr ručních pump Hill mk4-mk5 s těsnícím o-kroužkem pro zamezení pohlcování vlhkosti filtrem pokud není používán. Doporučený materiál PET-G. Tlouštka vrstvy 0,2 mm. Podpěry nesjou potřeba. Rozměr použitého o-kroužku…
Threaded connector for pumps for aquariums, fish tanks, ponds, and fountains. Connector with M20 thread and 15mm outlet diameter. Check out my other models. Przyłącze z gwintem do pompy do Akwariów, Zbiorników Rybnych, Stawów i Fontann.…
I use the empty pumpsprays from the Balea Men deodorant for isopropanol. This is a holder for it. It is attached to the Desk using Tesa Powerstrips. Printed with no support, in DasFilament Blue Pearl PLA with 0,4mm CHT Nozzle and 0,2mm…
I use this mount for my self build irrigation system. The pump feeds a GARDENA Micro-Drip-System. I designed multiple models supporting a float switch and a connector for an additional water tank. To prevent the mount from floating, i…
Wall mounting holder for Elpumps DSK-10 flow control switch. Probably good for the AL-KO DSK10 as well. First install the DSK-10 in the holder, then mount the pipes. The top part is secured by a zip-tie. Print Settings Printer Brand:…
Introduction The case is made up of two parts. It fits very tightly and holds the connection cable in place, so you don't have to worry about damaging the data cable. It also makes handling the Bartels micropumps easier. There is a stand…
The project is not yet finished and some parts are missing including the source code of the control. The source code will be published on Github. Please be patient. The fan mount increases the efficency of convector heaters, thereby…
Boost your radiator's performance with this modular 3D printed radiator fan. Designed for heat pumps, low-temperature heating systems, and traditional radiators, it improves heat distribution by actively circulating warm air throughout…
A few weeks ago, we had an issue with our main circuit for the pool technic and the main breaker tripped. After closer inspection I was kinda shocked to see that the clear cover on the display of our Steinbach Silent 5 heat pump has…
Filament Vacuum seal bag pump holding clamp for USB rechargeable pumps (50mm in diameter) Use this clamp to wall mount your electric vacuum seal bag pumps for storing your filament as dry as possible. Use Counter sunk wood or machine…
The suction feet on the small Brewtools pumps was not enough to keep them in place in the glycol chiller so i made a small mounting board which i could zip tie to the bottom. Printed in PETG with 25% infill and 0.15 structural. No…
This model is a replacement for the original Koshin hose nipple ( part 0110356 ) used on several 2" (50 mm) engine-driven water pumps. The original injection-molded plastic part on my pump cracked, so I "reverse-engineered" it from the…
Adapter to adapt from a Naturehike Pumpsack to the fill valve on a Forclaz sleeping pad. This was specifically tested with the pumpsack included with the Naturehike NKTR Air R5.8 matress and the Decathlon Forclaz MT500 Trekking Air…
Introduction The case is made up of two parts. It fits very tightly and holds the connection cable in place, so you don't have to worry about damaging the data cable. It also makes handling the Bartels micropumps easier. There is a stand…
Problem: If you own a budget HPA pump (like those from Temu or similar sellers) for filling small HPA tanks for paintball markers, you've probably experienced this annoying issue: the metal filter housing at the end of the hose is heavy…
I designed this model as a compact version of my other Kite Pump Organizer, specifically for smaller pumps where the hose wraps four times around the pump body. The organizer is secured in place with a zip tie. Most existing organizers…
interpretation of gas/diesel fuel pumps in Ho scale Category: Hobby
Threaded connector for pumps for aquariums, fish tanks, ponds, and fountains. Connector with M20 thread and 15mm outlet diameter. Check out my other models. Przyłącze z gwintem do pompy do Akwariów, Zbiorników Rybnych, Stawów i Fontann.…
This is a adapter to inflate a BigAgnes/Thermarest (WingLock) sleeping pad with a Alpacka Raft Pumpsack. Less than two full pumps are needed to inflate a 25x72 BigAgnes Rapide SL for reference. Material: TPU Infill: 100% Scale: 100,6% on…
This diffuser can be used with any air pump to supply oxygen or decorative bubbles in your aquarium. Ready to use with air hose 4/6 mm The best thing is that you can use cotton rounds eye makeup remover pads to renew the filter, which are…
This is my first “organic" model… and it's very late for this year Halloween…. About the model: This is my first “organic” model, the first model I'm posting not done with Fusion 360 or OpenSCAD. This was sculpted in Nomad Sculpt on iPad.…
This thing fits a bike pump safely to the front wheel. You can use the mounting holes for a disk brake, given that you aren't using a disk brake. The mounting holes are 50mm apart (from center to center) and the pump diameter should be…
Problem: If you own a budget HPA pump (like those from Temu or similar sellers) for filling small HPA tanks for paintball markers, you've probably experienced this annoying issue: the metal filter housing at the end of the hose is heavy…
interpretation of gas/diesel fuel pumps in Ho scale Category: Hobby
Needed a clip to prevent the accidental usage of Alconox CitraJet labware cleaner. Designed a clip that attaches to the stem of the pump and un-clips with a bit of force. Designed for a Boardwalk BWK00417EA siphon pump, but Fusion360 file…
Uses the clip-in mount that is included with the pump and encloses the pump to protect from the elements. Top and bottom snap together with small clips on either end and there is a slot and recess for a strap to ensure the lid stays put.…
Zweifach Halterung für die 1 Liter Pumpsprühflaschen. Mit zwei 4mm Schrauben an der Wand befestigen.
Bicycle water bottle spacer under the pump holder for wider bike frames
