208 models
Standard 50mm (2inch) vacuum cuffs tend to work loose in use on many tools and are rather bulky, so I was looking for a simple locking system that would be easily adapted to any tool, so that anyone with rudimentary cad skills could…
DOWNLOAD CAMLOCK and find more accessories HERE. This part will adapt a 40mm vacuum wand to the new CAMLOCK end. It should be a slightly loose fit depending on the taper of your vacuum. I use PFTE plumbers tape to ensure a perfect fit,…
DOWNLOAD CAMLOCK end fitting HERE. This part will make any of my old VACUUM ADAPTERS compatable to the new CAMLOCK end. It will be useful if you want to change over before making new fittings or if you like the new setup but don't want to…
DOWNLOAD CAMLOCK and find more accessories HERE. This fitting tapers from 45 to 46mm so it should fit anywhere a standard vacuum cuff would, and connect to the CAMLOCK end. It may be a slightly loose fit depending on the length of taper…
This is a 90-deg elbow that fits onto the exhaust port of a Dewalt DW735 Planer and allows you connect to a standard shop-vac hose. It can easily be printed with no supports and has tapered ends for a snug fit on both ends.
These hose adapters REALLY SUCK!!! This is a spreadsheet parameterized Freecad 0.18 file for generating printable adapters/couplers for vacuum hoses and accessories. It can make them in any size and gender, as long as it is a straight…
This adapter snaps onto the output dust port on the DW 735 planer and connects to a vacuum hose with the output angled up and sideways so that the hose doesn't drape down over the outfeeding workpiece. The OpenSCAD file is parameterized…
The popular Dewalt dwe7485 tablesaw has a 2.5" dust port (2.3" ID) that was WAY too big for the 1.5" OD hose I had standard on my ShopVac. Hardware stores didn't have the correct reducing couplers so I designed my own. There is an…
I designed a 40 and 85mm wide nozzle to be attached to a 35mm (outer) diameter (shop)vac. Personally I printed it with 0.2mm layer height and 5 walls. Also, flipped it 180 degrees to have the round sides at the build plate. NO support…
An alternative to Cirkul's $20 piece of plastic, this print allows you to store, protect, and dry the flavor cartridges for your favorite water bottle, without sealing all the moisture along with it. Designed with special draining…
This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard…
My miter saw is the Ryobi TSS103T. The inner diameter of the part that attaches to the miter saw is about 37.9mm (1.5 inches). The outer diameter of the part that attaches to the shopvac hose is 55mm (2 11/64 inches). I had to do just a…
Clip on dust extraction for the Makita 3709 edge router/trimmer base to use with a 35 mm shop vac. Due to I was not able to find a design with either the right diameter for my 35 mm shop vac or the possibility to see what the router bit…
This is a optimized shop vac nozzle for the festool hose with a 35mm rubber connector. The object is based on a basic design by @johnmeyer I modified the Fusion360 files with the proper 35,5mm diameter and shorted the length of the nozzle…
I had a hose from an old Philips vacuum cleaner lying around, which I wanted to use to extend my Karcher shopvac. So I needed an adapter to connect both hoses. All Karcher adapters I found online had a too small diameter, so I modified…
Simple male-male Adapter If you need help, have questions or want to collaborate, please feel free to join my discord server: https://discord.vr6syncro.de If you want to support me or thank me you can do it here Thanks, Alex
This is a nozzle for a Festool shopvac for cleaning keyboards, especially laptop keyboards. It is shaped so that it sucks between the keys, rows and columns, and the opening is too small for keycaps or track point caps to be sucked in.…
Simple funnel to connect Dewalt dw735 to 35 mm/ 40 mm shopvac. Outer diameter is 40 mm Inner diameter is 35 mm PETG recomended, or as you wish
Coupler to join two 2.5" Ridgid hoses together.
Some 3d mazes I generated with a script I wrote in Lua! If you've got a dual extrusion PVA setup for supports, then this a challenging torture test for it. I have yet to successfully print this, but it is possible. You can print with PLA…
I broke one of the drum latches on my Rigid HD NXT 6 Gallon Shop Vac that clips on the motor head. I was not able to find a printable part out there, so I measured and sketched up a functional replacement part in Fusion 360. Printed here…
This attachment was designed for 12mm keyways, but it can also be used for other applications.
This is an adaptor that allows connecting the hose of a Festool CTL Mini shopvac (and probably many other shopvacs) to the suction pipe and floor nozzle of a Bosch Solitaire Sphera vacuum cleaner. The problem is that the Festool shopvacs…
I was given an old shop vac that was missing one of its wheels. I could probably find one online but figured I would make one myself instead. I originally printed the caster body in PLA but it ended up breaking after about 2 years of…
Dewalt to rigid shop vac adapter
Background: I was building a cart for my DeWalt 12 gallon Stealthsonic shopvac and found that the supplied hose for the duststopper was too short if I mounted it on top of the vacuum. This is a right angle (elbow) adapter for the shopvac…
Print in a Y orientation. I used organic supports through the part to support the joint bridging, but I'm not sure if that's necessary
A hose adapter so that I could hook up my DeWalt table saw to the Stanley shopvac
Connects the vacuum port on a 10" Ryobi sliding mitre saw to the suction hose of a Dewalt shopvac hose for easy clean-up. Includes a 30° bend to keep the hose out of the way when using the saw. Print instructions Print standing up with at…
This is a shop vac adapter for the Makita SP6000J tracksaw to Ridgid shop vac. The size of the ridgid side is for the larger tube (similar dimensions to the intake of the shop vac). I had to go through several iterations to get the…
I suggest printing the part in PETG, which is what I did. I believe PLA would be too shock-sensitive for a vacuum hose that gets dropped and knocked around. I printed with 0.3mm layers except where the notches are on the Festool end,…
Needed a Dunlop2Boston adapter. Thanks to RoafBeest for the original Thing . For printing without support I added a 1 layer tick bridging layer where the diameter changes. This layer needs to be poked through (for example with a small…
I wanted to hook up my sawstop CTS to my shopvac, but the host didn't quite fit. Not sure if this adapter will fit other shop vac hoses, but it works great for my shopvac (1-7/8 hose) I uploaded a version 2. Main change is I aligned the…
This is a 90 degree elbow for connecting a full sized Shopvac to the Harbor Freight Benchtop Abrasive Cabinet. This fastens to the left side of the cabinet replacing what is intended to be the throughway for an air hose. I connect the…
An unofficial hose adapter + spacer/brace thingy to zip-tie your 1.5" shop vac hose to the LR4. There will be an official LR4 1.5" hose → 2.5"dust shoe adapter from v1e, but I made this in the mean time to get started. This is…
I was looking for an adapter that I could mount on my CNC that I could plug my Rigid Shop 2.5" shop vac into. I wanted something sturdy that will take come abuse and can be bumped into and not easily broken. The bolt holes are .25". In my…
Fits Ryobi PBLSV717 vacuum cleaner and any other Ryobi vacuum that takes the same type of attachment. Shopvac adapter are designed for 1.25"/32mm shopvac attachments. Recommend printing in materials that give rough surface finish (e.g.…
There are a ton of other vacuum adapters for different miter saws, this one is made simply to fit my older Ryobi TS1340 , I wanted an easy dust collection method as the bag didn't work too well. This is a very simple pressure fit 'tube',…
A hose adapter so that I could hook up my DeWalt miter saw to the Stanley shopvac
This is a set of 2.5" hose adapters (large shopvac hose) for Dronnn's well designed cyclone vacuum filter design, which you can download here: https://www.thingiverse.com/thing:2829268 These adapters feature an aerodynamic transition to…
Unlock cleaner workspace air when using your XTool Laser Cutter with my Universal Adapter! Specially crafted for enthusiasts and professionals alike, this adapter seamlessly connects your XTool S1* Laser Cutter's exhaust to a 1 7/8"…
I made this funnel for better filling of the PVA bags with fishing bait. Made for small bags, but also scalable for XL bags. PLA, infill 2, no support, speed max 150
This is intended to slot into a shop tool that's compatible with Shopvac/Rigid-sized “2.5 inch” vacuum hoses, and adapt it to the Centec Quick-Click system. Anticipated questions: Doesn't one of these come in a typical Quick-Click kit?…
I designed this simple adapter so that I could connect my shopvac to my orbital sander. It fits the profile of the sanding platform as well as the connecting pipe, giving a very solid and snug fit. The hose connection is 35 millimeters,…
A 1x4x6 Gridfinity holder for the Supvan E10 Label maker. This has a few extra features: A cut out for a charging cable and/or a USB C to Micro USB adapter. A small printed “nub” that allows you to press the label maker itself as though…
Designed to work with @PeterH awesome camlock design. Can remain in place when using original dust collection bag.
Needed an adapter so I designed one in OnShape.
I made some modifications to fit commonly available ShopVac filters in North America (Shop-Vac High Performance 90398 Cartridge Filter) Amazon link I also changed the conical transition between the upper and bottom cylinders to a step to…
The Makita DSP600/SP6000 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system.
Designed to work with @PeterH awesome camlock design. Will fit all Ridgid stand tools such as table saw, band saw, planer, chopsaw, spindle sander.
I've printed them in PETG because of the flexibility of the clip that snugs in the holes of the nozzles. Other than that printed on default 15% infill and a 0.2mm layer height. In combination with the different size hose adapters I'm able…
Simple adapter with a complex retention clip to connect a 2 ¼" shopvac hose to the Fein turbovac directly. The shopvac hose hose already connects just fine to the turbovac, but I wanted the locking/bayonet connection. Print the adapter at…
Endpiece from a Sears Craftsman Shop-vac hose used to connect accessories to. The original I had cracked. The outside diameter of the hose end is 2 1/4 inches. taken from https://www.thingiverse.com/thing:357574
Small nozzle for shopvac with hose about 1 1/4" (32mm). Used it to blow fake spiderwebs with a hot glue gun. Edit at https://www.tinkercad.com/things/iJOSzkoQCtO
German: Modifizierte Version für DN40 Rohre und Adapter. Kann auch für PVC-Kugelhähne verwendet werden siehe Bild. Der Hebelel wurde modifizert das der Magnet leichter rein geht und das er im offenen Zustand nicht mehr am Verbinder…
Simple bait filler for PVA nets. The tube has a diameter of 34,5mm, the packer fits tightly. Additionally transport tube. Printing without supports.…
Product Description: Keep your hat collection organized and in perfect condition with the CapVault Hat Organizer . This sleek and functional 3D-printed organizer offers secure and accessible storage for your favorite hats. Its modern and…
The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…
None of my adaptors worked for this saw to my shopvac (Rigid), so I made one. I printed this with ABS and it is a tight fit, but that is a good thing. So far it is strong and working well. You could also maybe use TPU, but it might slip…
This is an adapter to connect the standard FESTOOL Kapex KS 60 E miter saw vacuum port to a SHOPVAC camlock connector. On side A is the festool part and on side B the camlock male part. An additional thanks to…
(Wasn't sure which 3D model I was supposed to use as my “remix source”, so I went with the one that had the instructions for making your own male connections) Long story short; I recently started using the CamLock system this model…
Shopvac dust collecter adapter for Black & Decker Dragster Belt Sander
Made this to connect the bag adapter on a Dewalt Mitre Saw. Pop the bag off the adapter, slide this on and connect a 2.25" hose. Done.
(DE) Kombi Reiniger für Staubsaugerroboter, schneller Druck, universell einsetzbar, ohne Stützstrukturen (EN) Combi cleaner for robot vacuum cleaners, fast pressure, universally applicable, without support structures
The original four casters on my ShopVac rolling base were low quality and one of mine had broken after “light” use. I had a set of five office chair casters left over from upgrading my original office chair casters to premium…
This is a set of two hose and pipe adaptors to attach a China cyclone (from eBay) to a Festool shopvac (in my case, a CTL Mini (up to 2018)). This also includes a set of attachment parts to mount something onto a systainer or a shopvac…
Dewalt Jobsite Table saw to Dewalt 8 Gallon ShopVac Model DXV08SA.
This is a lid for the bottom of a shop vac filter 90304 . My shop vac only came with the wet/dry filter, and when I bought a replacement dry-only filter (90304) I noticed I needed the lid to completely seal up the bottom of the filter…
Thanks to @PeterH for his "SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH" and accessories. Using the same principle I made this suction nozzle so I can quickly disconnect the suction from the dust shoe and connect it to the…
Sadly no better Images at the moment. But if you own the Machine you will know what it is for. Links to the other Models you need: https://www.printables.com/de/model/338478-flexible-hose-link-fusion-360…
I recently tried to use my shop vac for dust collection from my sander. While the hose almost fit on the sander, it didn't quite fit. So I designed this part to ensure a solid connection on both sides. Printed vertically in PLA, no…
Reemix of the sander vacuum hose adapter for the GEX 40-150 Bosch by Vicente Adauy to fit the universeral Shopvac Camlock coupling by @ Peter H :…
Prints without supports with almost any filament
This is an adapter for the Ryobi belt sander RYOBI 3 in. x 18 in. model # BE319 to a standard Ridgid shop vac hose. Printed in black ASA, 0.2mm layer height.
pva mesh, fisching, packaging, dispenser, funnel
Makita LS Sliding Compound Mitre Saw ShopVac Vacuum Adapter 32mm ID /41mm OD ShopVac Vacuum Adapter to Makita LS Sliding Compound Mitre Saw Compatible Model: LS1219 LS1019 LS003GM102
This end is for a Ridgid 4 gallon model 4070 shop vac with 1-7/8" hose, there are likely other ridgid shopvac's that use this 1-7/8" locking hose as well; its also called a Ridgid Tug-A-Long Genuine OEM 31713 1-7/8 hose. The locking end…
ShopVac adapter to go from a 1-7/8" hose to a 2-1/2" tool.
The inexpensive Scheppach workshop vacuum comes with a cheap, sad, thin hose. To use the vacuum's full capacity, a wider hose can do a lot of good. This adapter allows you to put a serious 60mm hose to use on your Scheppach ASP-30-*.…
The Makita DPJ180 - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the Makita DPJ180 18V LXT Biscuit Jointer to the SHOPVAC CAMLOCK vacuum system.
Adapteur pour shopvac Dewalt 45mm à 48,5mm. Je l'ai crée pour connecter le collecteur de poissière milwaukee. Imprimer avec du PLA+ noir 15% infill réglage standard selon votre imprimante.
I used the original endpiece of the IKEA HOPPVALS blind to design this one. I removed the top piece of plastic to accommodate a hanger that was positioned closer to the edge of the blind than the original end-stop would allow. (I did not…
Cet adaptateur aide pour passer l'aspirateur dans les endroits plus restreints comme à l'intérieur de l'enclosure Prusa. Je suggère le support organique pour cette impression.
This is a fairly obscure part! I needed to neatly blank off the original outlet hole for my vacuum when I converted it to a collector for the mini cyclone. You can download the adapter for the lid to fit the cyclone to it HERE.
I was tired of looking where I left it, so I decided to create a holder and attach it to the wall. I use Fusion 360 and I import a photo and design a holder around it. I think it works nicely. I printed it upward without any support with…
A shopvac adapter for the Chicago Electric 63118 table saw. My table saw had a “dustport” that was essentially just a hole in the side of the box. This sucked. Or rather, there was no way to get the dust sucked out. I made this to fit the…
This Clip will secure a standard shopvac hose to the Y-Plate of the LowRider2 CNC. These are printed in PLA, but I suspect that anything will do! For more information please visit the V1 Engineering website and forums.
THESE INSTRUCTIONS SHOULD BE FOLLOWED BY ADULTS OR UNDER ADULT SUPERVISION. So there are no good vacuforming rigs out there for 3d printers, probably because you can't make a good vacuforming rig with a 3d printer! You can, however, make…
I have a Rigid shopvac and use it to blow out my pool lines for winter
Adapters for sawdust collection: DWS779 42mm OD to Shopvac 36.7mm OD DWE7491RS 65mm OD to Shopvac 36.7mm OD I printed these with PETG-HF with rafts. Fusion File attached.
Using Peter H 's great Camlock design as a basis, I modeled an adapter that nicely fits the DeWalt DW733 dust exhaust port. The adapter is asymmetrical, for optimal flow of the dust / wood chips Wall thicknesses are optimized for a 0,4mm…
Had a shark vac pet hair attachment that I wanted to use with my shopvac.
A plug for the bottom attachment hole on a shopvac style filter so the filter can be used for other things like homemade dust collector or air cleaner. sortof needless to post as its a 2 minute make in 123d but, now its downloadable.…
The lid for my ShopVac broke so I designed a replacement that doesn't hook onto the mechanism for ease of print. You can print it on either orientation without supports.
This is a leg mount for my Rigid ShopVac that I made a two-bucket Thien Baffle dust collection system for ( https://www.thingiverse.com/make:724045 ). I wanted to be able to mount the two-bucket dust collector above the ShopVac so that it…
My dust collection setup features DN75 tubing at its base. Recently a DC4 shopvac fell into my hands for cheap and I like its power and compact size a lot. It does, however have a 90mm opening. This adapter allows those cheap DN75 tubes…
This is an adapter to go from a wen mm1014 miter saw to a 2 1/4 inch ridgid shop vac hose
![Shopvac Hose Adapter Generator [Parametric]](https://media.printables.com/media/prints/322217/images/2782354_8da81c7b-012f-4dbe-a5bc-3735b8ff12a7/0329ca18c119e225468b09b64970899e_display_large_322217.jpg)
