Counting matching models…
Designed this around the QX-Motor 30mm EDF 7000KV For the FMS Alpha Free Flight Airplane https://www.horizonhobby.com/product/free-flight-alpha-red-kit-467mm/FMM073RED.html . Intake area is slightly more than EDF. Exhaust area is about…
90mm x 56mm x 16mm bend soldering tags (180°) Category: R/C Vehicles
Hi all, this is my first upload and I hope it helps some of you to save some money or just to make a kid smile again. The Story behind: My little one got a Kid's Car that was defective for free from a friend. The car could not move…
0.2-.3mm, 5% infill, PETG, but you can use whatever filament you would like. Fit like a glove. Glued to foam with foam safe CA. Slight friction fit on front of EDF. Used a small amount of glue to install EDF. It is stout so can probably…
Stick Protector Taranis QX7 V2 I modified the model so that it fits correctly on the sticks
Update: Updated the feet to allow the transmitter to sit flat on a flat surface, filleted the thumb grips for printing in the face down orientation A replacement for the standard QX7 battery door, designed to be printed on an FDM printer.…
This is a drop in replacement for the original Taranis Q X7 Menu Buttons, Power Button and Dial. I printed these in neon yellow saintsmart TPU and after some tweaking of the model these fit and work absolutely perfect for me! Except for…
A stick protector for a Taranis X7. While I modeled the 3D model from scratch (so it isn't a direct remix), the design is largely based on the linked thing. Prints as a single piece. Modeling was done in blender and the source file is…
Support auf Buildplate notwendig!
This is a remix of @uSD_cardlord_2322350's inserts for the SQ10 probes, so that you can also store the similar oscilloscope probes in a rugged box. The remix is a bit quick and dirty in terms of details, as I didn't have much time. But…
A 2 bay QNAP NAS bracket for the QXP-W6-AX200 Wi-Fi card
Use original battery pad. No soldering, no cutting. Almost plug'n'play I have to punch a hole in positive pads to ext
Since I'm using a QX7, I wanted to have a charge block which fits all my needs. So I've done this remix. Thanks for the original design. I also changed the bottom of the block, to make it easier for soldering. Have fun!
Mod to make Behringer mixer Xenyx QX1002 USB more modern and save space. Print Settings Resolution: 0,2 Extrusion Width: 0,4 Outline Perimeters: 2 Top Layer: 4 Button Layer 4 Infill: 15% - Gyroid Supports: Yes - For Screw Hole Rafts: No…
This is my frame for the Blade 350 QX/2/3. If you're still stuck with one of these like I am and don't want to order a new frame, this may be the frame for you. I primarily designed it because I was unsatisfied with the other printable…
3s 18650 Battery Tray for QX7 Print Settings Resolution: .12 Infill: 100 **Filament:** Overture PLA Notes: I used the metal battery tabs from the stock AA qx7 battery tray to make this 18650 holder. In order to use this tray for both…
Broke the bottom USB / S.PORT cover on my old QX7. Made a matchin one in orange and added matching markings on the inside for the ports. Category: R/C Vehicles
A Gimbal protector fitted to the Qx7, I've lost a few and I thought it would be a good item to do while trying out a new cad program for the first time. The ones in the photos are not 3d printed but they are what this model is based on.
My pair of monitors are mounted on a stand. I use these brackets to help keep them at a precise angle, and to keep them from warbling around. 3D Printed Monitor Bracket at patshead.com Monitor Bracket for QNIX QX2710 at github Category:…
Couldn't mount the monitor to my monitor arm and didn't have any spacers that I trusted so I made something better. WARNING: I'm not responsible for any poor mounting or damage.
Frame to display your 72x86mm pictures from Selphy QX10 anywhere a magnet magnetize! Just glue in a 3.5mm diameter magnet after printing Printed 0.2 layer height, infill does not matter.
I really liked the stand of my AG273QX but wanted to be able to mount another display to it. This adapter can be used with any VESA 100 compatible display. The screw holes in the adapter fit M4 screws which should be the most common. The…
This is an alternate frame design for the Eachine BAT QX105 quadcopter. The original carbon fiber frame is quite fragile so creating a backup was a top priority for me after I bought one. As expected the carbon frame broke on the second…
EDF 50mm QX-model blower holder / cover used in my RQ-170 drone inspired flying wing
When my Behringer QX1202USB broke because an electrolyte capacitor lost most of it's capacity, I not only replaced every electrolyte for the power supply but I also removed the tiny heatsink that was mounted directly below those…
Proper guard for all quad with 8.5mm motor. Just print and clip! Protège hélice pour tous les quad nano qui ont des moteur en 8.5 mm. Toute la série des QX de eachine est compatible : QX80 QX90 QX95 etc... Category: R/C Vehicles
Hello, I only use TBS Crossfire on my quads therefore I don't really need the 2,4GHz Module/Antenna. I wanted to remove the antenna because it's often in the way. But I opted to mount a SMA connector for the 2,4GHz just in case I need it…
EDF 50mm QX-model blower holder / cover used in my RQ-170 drone inspired flying wing
These gimbal stabilizers slip over your Taranis QX7's sticks to protect them by preventing movement during transportation in a bag or suitcase.
Gimbal protector for Grand Lotus sticks on a QX7S. May fit other radios with Grand Lotus sticks but can't promise that they will. There is a cutout so they can be slightly squeezed and pressed into place. Supports are recommended even…
This is a replacement tab for the AEG QX8 stick vacuum cleaner. This part holds the vacuum on the charging stand to charge it. I put 2 M3 heat set inserts in it. To mount it, you drill two holes 14mm apart (you can use the template…
Just prop guard for tiny qx80. Print Settings Printer: GATE 3Novatica Rafts: No Supports: No Resolution: 0.2mm Infill: 100% Notes: PLA Printed... Category: R/C Vehicles
This is a coin holder for the Infiniti Qx80 which I made on Fusion360 a long time ago I uploaded the fusion360 file for you to be able to edit and recreate the coin area to your coin sizes.
this is a tilted camera support for EACHINE QX90 micro quad copter. Tilt is 20 degrees. This remix lets you mount the camera in the front of the quadcopter, significantly reducing the total height, and moving the props away from the…
Got tired of screwing and unscrewing the Diamond antenna, so made a mount for it. Fits in my bag perfectly and holds the antenna in place. Not ideal for longrange but works for me. A little tricky to mount if you decide to keep your…
In the "Multiled QT" model from the manufacturer GS Vitec, two 24V fans are connected in series. After these broke down, I have constructed a cover for a single 48V fan here. So this is a replacement part, or an improvement on the…
Taranis QX7 Screw In Battery Door With Body Rest. For use in conjunction with a neck strap and balance bar. It keeps the radio a set distance from your body and more firmly in place allowing to focus more on flying and less on holding the…
no support need Category: R/C Vehicles
Frsky taranis QX7 joystick caps Print settings 0,15mm layer (0,2 mm first layer) 4 walls 25% infill no supports
print with flexible filament like TPU this will not fit properly with a solid filament as it is designed to fit snuggly in the gimbal cutout and around the QX7S stock thumb sticks Print Settings Printer Brand: Printrbot Printer: Printrbot…
I put only the left ring so to print the right one, just do a mirror inversion in your slicer. Set them up on your radio only by replacing the older ones, there are the same dimensions. I give the fusion 360 file if you want to modify…
A replacement for worn-out or lost Sonor AQ2 or AQX-compatible drum lug spacers/gaskets, modeled to replicate the originals. Fits: Sonor AQ2/AQX-compatible drum lugs. Files: AQ2 Spacer.stl : lug spacer Sonor FT Spacer_v2.stl : floor tom…
Kamera-Halterung fuer Boscam CM205 auf Blade Nano QX. Camera mount for CM205 Boscam on blade Nano QX. Category: R/C Vehicles
This is a two part mount for the Blade 200 qx quadcopter. I wanted a camera mount that faces down, so I designed one. It is in two pieces, so you can use the main mount as a platform for your own designs. This may not need supports,…
Mount for Hawkeye little pilot FPV monitor Requires screw to fix monitor to mount. Mount snaps onto round dial. 2 version : tilt and flat
**NOTE** This shell doesnt have the holes for switches. I drilled the holes manually after printing it according to my hands fit.
Good idea to use ABS-Flex, Elastan or even Nylon
An Eachine QX90 Propeller Guard, designed with this particular quadcopter in mind, but could fit any 90mm frame using 8,5mm motors. The propeller guard can fit up to 62mm propeller diameter. Lite edition - Lighter, faster It is a revision…
i broke the dial for the encoder while doing the tbs baud mod and needed a replacement this one i made to resemble the original
The flat version is what I’m using cause it should be stronger but im including an earlier version that I think looks better (if you cleaned it up the model is kinda funky) but not as strong and maybe too thick to fit some things through…
3s 18650 Battery Tray for QX7 Print Settings Resolution: .12 Infill: 100 **Filament:** Overture PLA Notes: I used the metal battery tabs from the stock AA qx7 battery tray to make this 18650 holder. In order to use this tray for both…
This is a mount adapter plate for the Sony DSC-QX10 phone-back camera, allowing it to be magnetically attached to recent IPhone and similar phones with circular magnetic attachment points on back. This mount utilizes the existing mounting…
I put only the left ring so to print the right one, just do a mirror inversion in your slicer. Set them up on your radio only by replacing the older ones, there are the same dimensions. I give the fusion 360 file if you want to modify…
I needed a way to organize the stuff in my center console, so I made this. It took a few iterations to get the perimeter dimensions and angles right, then a few more to get the side draft and dividers set up. I initially had a solid…
A 60mm fan mount to replace the 40mm stock fan and mount. The mount is self centering on the heatsink with perpendicular slot guides to ensure it doesn't move in any direction.
This is a mount adapter plate for the Sony DSC-QX10 phone-back camera, allowing it to be magnetically attached to recent IPhone and similar phones with circular magnetic attachment points on back. This mount utilizes the existing mounting…
This is a replacement frame for the Blade Nano QX2 FPV Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Infill: 100 Filament: FormFuture Carbonfil…
About as easy as it gets for mounting your Spektrum FPV camera to your QX3d. Just slide it on (friction fit) and add a bit of double sided tape to mount the camera. If the fit is a bit loose, just fold a piece of thin tape over the Qx fin…
Camera angle plate for the Eachine QX95 quadcopter. It simply slides under the camera using the original rubber band attachment and still allows it to be moved in hard landings. There are models for 10, 15 and 20 degree angle. The nut in…
No, not another Quad copter but instead a means to stop buying fragile frames (not crash proof). Print these parts up (I color code the arms to the LED colors for the daytime orientation. The glowing "lamps" are clear ABS (translucent…
I've created an IXXI-like system to mount the square photos of the Canon Selphy Square QX10 on our wall. We only put wall connectors on the top row and keep expanding downwards. As you can see on the photo its also possible to go outside…
Sonor AQX 20 mm bass drum leg extension I use them on my 18" bass drum with a 3d printed riser. They slide onto the existing leg. Simply printed upside down with no supports and 0.2 mm layer height Tap the inside thread : I used an M10…
