Counting matching models…
Fast printable battery box for C / baby / LR14 batteries. Printed in vasemode with Prusament PETG Prusa Orange. First Layer: 0.2 Layer Heigth: 0.32 Solid Layer Bottom: 5 Spiral Vase: yes Infill: 0% Nozzle: 0.6
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
The wheels are for WORX Landroid PLUS WR148E. Diameter 220mm. The Weigths from the old wheels can be used (have to be used) Improves spinnig wheel problem. I print the Cover and Hubs in ASA (can be printet also in PETG or PLA) The Tire is…
This is an expanded version of Jason D Modular Battery Holder. I've made several changes to clean up all the “remixes” out there, make the modules truly standardised and “OCD friendly”. I was basically annoyed how different remixes…
The original Worx cutting disc size is 145mm, with original blades the full cutting width is 175mm. There are other versions around but mostly for older Landroids. I wanted to create my own and also make some changes to the original…
FULL INSTRUCTIONS: https://randotechnerd.com/clear-petg This is only the settings for a 0.6mm nozzle single tile. Use the .3mf for settings the stl is just a 20x20x4 cube (images here are of this size). Original video 22x22x6mm for the…
Komplettrad für bessere traktion. Felge aus ASA-X, reifen aus TPU bzw TPE Felgen sind mit 2kg blei gefüllt und somit ist die traktion perfekt. ( 2kg Bleikugeln 4mm Durchmesser ) Wurde dann mit epoxidharz ausgegossen Reifen wurde mit 50%…
Ich hab einen Batterie Adapter von AA auf C (Baby / LR14) im Vasen Modus erstellt. Leicht zu drucken mit wenig Materiel. I created a battery adapter from AA auf C (Baby / LR14) in vase mode. Easy to print with little material.
Remix of the great GAZ66 model of Pfelpensson, here the R142-version, a radio and command post, used within eastern armies. Model is hollow with holes in bottom. One version is with interior, you may see the radio compartment forward and…
I got a request from Neistsch to modifying my existing thing to fit the Worx Landgroid M500 series, so over a week or so of emailing measurements, images, test parts etc. we finally got the wheel fitted and adjusted to work. The images…
Stackable Gridfinity bins, one 1x2x5 for storing 10 * LR14250 batteries, one 1x1x2 for storing 16 LR41 and one 1x1x2 for storing 10 LR44. The base box is generated with the Fusion 360 GridfinityGenerator,…
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
Gridfinity battery bin for C-/R14-batteries. The bin can be stacked by using the included spacer. A 1x3x4 bin that fits 4 batteries. A 1x3x4 spacer that is needed to stack the battery bins. NOTE: The spacers are best printed upside down…
Simple adapter allowing usage of AA batteries instead of LR14/C. Two version available - 1xAA and 2xAA. Print in Vase mode with min. 0.7mm wal thickness. PETG should work best.
Since I always have a small supply of CR2032 batteries, moreover ER14250 batteries (for "Eve Door & Window"), I was missing a crate variant from CAD-Guy . This mix of these two battery types can hold 14 x CR2032 batteries (or smaller…
Purpose: Designed specifically for the Worx Landroid robotic mower, this brick tray/basket aims to improve traction, ensuring smoother operation. Unique Feature: Its simplicity is its strength. The design is straightforward, making it…
Voila j'ai eu besoin de pile LR14 pour les murs infrarouge de mon aspirateur robot. n'en n'ayant pas j'ai créé cet adaptateur . et utilise des "piles rechargeables" AA 2500 mA fichier FreeCAD fournit comme d'hab Category: Engineering
Schichthöhe 0,16 ASA-X nur kein PLA wegen wetter Abdeckung befindet sich noch in der Testphase Bolzen müssen verklebt werden, aber nur auf einer Seite. Entweder am teller oder an der aufnahme. Benötigt wird : 8x m3 schmelzmutter und m3…
Inverseur pour clé Milwaukee M12FIR14 inspiré du modele de Ratchet Knob non vendu en europe (https://www.ratchetknob.com/shop/p/12-magnetic-one-finger-reversible-ratchet-knob) Les aimants ont un diametre de 6mm x 4mm…
I tried to translate settings posted by Rygar1432 in “ How To Print Glass ” into Cura settings. I probably made some mistakes and I didn't tested them, but I decidet to post them anyway (feel free to correct me in comments). A also…
Bonjour, Voici un support de téléphone à l'image d'une Kawasaki ZZR 1400. Si vous n'avez pas d'imprimante n'hésitez pas à me contacter pour avoir le votre ! Pensez à vous abonner à mon compte pour être au courant de mes nouveaux objets !…
Pressure testing from the transmission housing ports isn't reliable. After building up the CDF hub and installing clutches, you can pressure test it to make sure none of the seals are damaged. Also good for checking clutch clearances.…
Mount for small dc motor used in toys. Verify dimensions with the motor you intend to use it with as we have had several motors with slightly different actual dimensions.
Hi, I have built a small “battery thief circuit” some time ago to drive a LED-String-Light with a few old, almost empty batteries. Normally I use AA and AAA type batteries. But I grabbed a few “D | LR20 | Mono” and "C-Baby | LR14" cells…
A coin storage solution remixed to be compatible with the excellent gridfinity with pin system which requires no magnets: https://makerworld.com/en/models/440624#profileId-346300
I really liked the wheel CAD Solutions Neumayr made since it looks nice, does not damage the original tires with screws, is functional in that it should have better traction due to the airless tire design and uses the original wheel…
Printed on Ender 3 Pro, used Inland PLA+. I printed 3 but only ended up using two of the mounting brackets. The holes for the screws are roughly 4.5mm because I am using thick screws I had laying around (#10x1"). Feel free to remix in…
Replaces the original 3 blade plate. For cleaner cuts and less noise. Pause print after ~7mm and insert standard M5 nuts
Working on a commercial project that required long battery life but found I was only getting about a month on each ER14250. The target was 1-2 years on a ER14250. This required me to build a substitute battery that would be placed in the…
Quick and dirty Adapter I whipped up to adapt 2 cr2032 to an er14250 socket. it has a build in support you need to remove and you need something to make the contacts out of like copper foil or in a pinch aluminum foil. the cr2032 will…
Printed on a K1 Max with no support required.
This cover may fit other openers with this similar case. It does fit tight and may need a little carving and sanding to fit. Since the tabs are an overhang and I did not use supports they bowed down a little. I used a pocketknife to trim…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/j6Y03d6NMtU Category: 3D Printing
Wanted extra ones because they are such a pain to pull out of a dirty filter to be put into a clean one.
A simple box to hold my Rx Corona R14FA in my towing plane, MPX BigLift II Category: R/C Vehicles
R14 battery insert for German Imperial Railways lamp with spare compartment for batteries Printer: Ender 3 V2 Layer height: 1.6mm Infill: 20% Material: PLA…
positive pole at red = empty positive pole at green = full
I wanted to store also LR14 batteries in a beer crate so that it fits to my other beer crate battery holders, so I redesigned the empty battery beer crate
I printed it in PLA, but I get a feeling that PETG would work better long-term. It worked for a year flawlessly now.
I mainly made this to challenge myself. I tested it without putting the whole compressor housing back together, but really I would not recommend using it in a car you rely on. It's only a £40 part. On the other hand, seeing as the OEM…
I didn't got somewhere a suitable cutting disc for my lawn mover (Worx Landroid WR141E from 2019). So i decide to make my own. Improvements to the original one: - disc diameter => 154mm - bigger cutting diameter => 188m - more…
I decide to create my own wheels for my Worx Landroid WR141e because i didn't know if the other one will fit at my lawnmover. Some people are using stones on top of the lawnmover to make it heavier for better traktion. I found that this…
Holder for 8 ER14250 batteries. Two versions are included.
Ein wenig Fun.... Elektronisch wird das Projekt noch erweitert, da mich ein oder zwei dinge noch stören. Die 5V liegen leider dauerhaft an der USB Schnittstelle an... hier möchte ich noch ein Relais verbauen, was von der…
3D Printed BarEnd replacement for my ZZR1400 0.16 Layer 0.4 Nozzle 50mm/s speed 60% Infill so its fairly solid for its use-case. Uses same bolt from original bar-end Printed in PETG
another figure from the deivtdoestutorials arg this time being jameswarrior. the sides of the betrayed hat are abit fragile so i suggest adding some superglue ontop of them for extra resistance
Phone mount to fit into steering shaft over nut. 0.2 layer 0.4 nozzle 50mm/s speed PETG
Replaces the original 3 blade plate. For cleaner cuts and less noise. Pause print after ~7mm and insert standard M5 nuts
Battery holder for 7 x C (R14) batteries with screw mounting holes.
Hard to get this guard these days. Works as per the original. This one is printed in PLA as it's a prototype, but I'd recommend printing it in somthing more robust. When/if this breaks I'll print it again in Nylon/CF. Includes integrated…
