Counting matching models…
Based on the block template i designed some gridfinity battery holders i couldn't find online (at least not in this dense packing). Fusion files and STLs included for these batteries 40x LR44 8x/11x/14x CR123(A) 20x CR2032 12x CR1632 Note…
Added 10/11/2025 V3 rim center w/o connector parts (Schraubverbinder) (Felgenschüssel ohne Schraubverbinder) and suitable tire with M3 metric threads. Printing the threads in tpu might fail but then you can just screw them in. Threads for…
Maximize your storage space and keep things organized with these ER16/32 collet trays. Each tray measures 1 x 4.5 x 4.5 inches. Each ER16 tray has 16 locations in a 4x4 pattern, and the ER32 tray has 9 locations in a 3x3 pattern. Want to…
Werkzeughalter für Kegelsenker, kleine Gewindebohrer usw. Die Spannzangen entsprechen ER16-Spannzangen. Sie haben einen Spannberich von ca. 0,5mm nach unten, d.h. so könnt ihr zum Beispiel einen 3,3mm Bohrer in der 3,5mm Spannzange…
Cutting disc with 6 blades compatible with WR167E - Landroid M700 Plus This is the new version of Landroid with the Hex adapter below the cutting disk. Diameter and total height are the same of the stock cutting disk. Just use M4 standard…
This is a remix of dhiltonp's battery holder that fits CR2450 and CR1620 batteries
ER32, ER25, and ER16 Collet Holders For Gridfinity Designed to to press fit for magnets for easy insertion and channels for easy removal.
This is based on my CR2032 coin cell holder design, with the following User Parameters changed: cell_diameter = 16mm cell_thickness = 3.2mm See the original model under “This remix is based on” for Fusion360 source file. If you don't have…
canopy and batteyr holder for the analog version of the V2 firefly nano. this has the holder for an elrs receiver.
!!! The use of the parts is on your own risk, no liability for injury or damage. !!! Custom knife plate for Worx Landroid M500 (WR165E, model 2020) with 5 blades. Can be used on all cut height settings. After printing of the plate part,…
Collet Tray for up to 8 Collets ER16 ER25 ER32
This is a Remix of Print-in-Place, Customizable Cases for Button-type Batteries made by fuchsr that will fit 10 CR1632 Coin-Cell Batteries. Please refer to the original model and its detailed documentation regarding Print Settings etc. :)
A 18.52x8 Battery Mount for the Flywoo Firefly 1S Nano Baby Quad V2 DC16/FR16. Print in TPU at 0.2mm and possibly 100% Infill. Printed on a Creality Ender 3 Neo (Bowden) slowly with my special TPU profile. Uses the stock mounting method…
Printed on a Prusa mini in PLA
fully modular rack system for ER16 collets. you can print as many elements as you need and connect them together. there are three types in order to be able to build a smooth tray without protruding connectors. ER16_Colletholder - is the…
Spoiler für Worx WR165E M500 mit Batteriefach. Der Spoiler wird hinten auf das Batteriefach geklebt. Ich hab es mit Heißkleber gemacht. Der Knopf für das Fach ist immernoch erreichbar mit einem schmalen Gegenstand. Der Spoiler hat nur…
I have a few places of mud and/or incline on my lawn that the original mower wheels have struggled with. I wanted to print a replacement tire that uses the original wheels to reduce filament usage and have it look somewhat stock/original.…
Design description This is a gridfinity holder for 22 CR1616 Coin cell batteries. Block area is 1x1, and has a height of ⅔, stackable. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…
This is a remix of the great battery holder by @dhiltonp . I've moved the slots and adjusted them to be 2 slots for CR16XX batteries and 2 slots for LR44/SR44/other 11.5mm diameter batteries. Gridfinity is a project by Zack Freedman ,…
ER20 collet holder compatible with Gridfinity - or use it on it's own.
I've got a few landscape spotlights that produce an annoying glare when walking by them. Searching a bit, I found the solution to the problem was to place a louver (or louvre) between the bulb and the lens of the spotlight housing. Many…
I wanted something for my CR batteries, to fit onto a 2x2 grid. For the Bin base, I used the Fusion360 Gridfinity extension: https://apps.autodesk.com/FUSION/en/Detail/HelpDoc?appId=7197558650811789&appLang=en&os=Win64. Supported CR Cell…
Collet Holder - Organizer for ER16 A practical stand for storing collets ER16. You can print several and stack them in layers, you can also print a stand for other collets (ER40, ER32 or ER25 - which I have in my models) - they will also…
ER11-ER32 wipers for collet holders. Should print best in the original orientation cone down. I printed them on a i3 MK3 with structured bed, 0,4mm Nozzle, PETG, 3 perimeters and 25%infill. For ER11 up to ER20 i suggest using a brim (i…
This is a replacement for the original rubber sleeve on the front wheel. It seems to improve the maneuverability and therefore gets less stuck. Printed on a resin printer (ABS Like Resin) but FDM prints will work just as good.
Felge für Worx Landroid M500 WR164E Den Reifen habe ich vom User Daniel übernommen ---->>> Download WICHTIG!!!! Der Reifen MUSS auf 98% der Ursprünglichen Größe gedruckt werden sonst passt er nicht auf die Felge!!!!! Link zum Spoiler
Holds a maximum of 144 collets but is more user friendly if an empty space is left between the collets. I have printed this in PLA and PETG with good results.
The rear slides over the hop up adjuster and is open at the bottom so it doesn't interfere with MLOK forward grips. The rear part is held in by the front piece once its screwed onto the barrel thread. You will have to remove the barrel…
Coin cell battery holders made to fit in C and D battery dimensions. Designed to add cell batteries to unused C/D slots in a battery organizer. Currently supports: CR1632 CR2032 CR2450 LR44 These are the batteries I use so that's what I…
Lampenschirm für GU10 und MR16 LED Leuchtmittel Einfache und praktische Lampenschirme für die meisten GU10 und MR16 LED Leuchtmittel. ____________ Lampshade for GU10 and MR16 LED bulbs Simple and practical lamp shades for most GU10 and…
I´m trimming my hair in the shower and don´t want to leave the shower with hair all over my body. So I needed a place to put my hair trimmer while showering. I attached the holder with two double sided tapes onto the outside glas panel of…
I designed this barndoor system for my PAR16 Spotlights. They work great at controlling the light and can be rotated as needed due to the round fixture. Your lights might differ, so check the fixing mechanism and scaling to get a good…
Collet holder for 9, 12 , 15 or 18 collets of type ER16, ER20 or ER25. Please see 3D model for details. 9, 12 , 15 or 18 collets can be stored. No dirt collects in the recesses as it falls out at the bottom or rear.…
1/4 scale replica of the ubiquitous PAR64 theatre lighting fixture. I've included cans for both a short and long version to suit your taste. For best results on the long can, line the inside surface of the tube with some aluminium foil.…
This is an adaptor ring which I created to mount MR16 LED lights into an luminaire which would normally use AR111 lights. I my case I wanted to fit specific tunable-white LED spots from ConstaLED into an “Ronka” luminaire from Arcchio. I…
Dimensions: 150 x 130 x 29mm and 150 x 64 x 29mm for the halved version Fixed issue where stl models were 10x smaller
A simple 1x3 GridFinity holder for ER16 Collets. Holds 10x collets.
Fits any ER16 collet of any various range of sizes. Made revisions to this to prevent the collets from falling out in transport Highly recommended to print in PETG (I printed this in ABS). If you do choose to print it in PLA, fit the top…
This is my first extension and publication for Gridfinity community. Great thanks to all of you, a just did my own module. A 1X2 CR2032 and CR1632 battery holder. Special thanks to https://thangs.com/designer/whoistobias for his Battery…
ER16 Collet Holder for Gridfinity Holds 12 on a 2x2 grid.
Multi battery organizer - 4xCR1616, 10xCR2025, 10xCR2032, 4xCR2450, 4xLR41, 12xLR44, 6xLR54, 6xAA, 5xAAA, 2xSD, 2xminiSD
Spare part for Bruder excavator Schaeff HR16 02432
These SBR16 rail holders are removable and do not have to drill the base of the Snapmaker.
A simple light enhousing which I designed in OpenSCAD for all those MR16 LED spots I had lying around from previous bike lights. I printed them in PETG with 100% Infill. Time will tell how well they will last if exposed to the element.…
Print in 100% (PLA) for strength.
A simple battery holder for six or ten CR1620 batteries as requested by @Bamse_2416348. The model requires well tuned support interfaces for a clean print. I had no CR1620 batteries lying around, so on the photo it's filled with 1 euro…
This model spawned from me looking for a weather resistant storage case for both CR1620 and CR2032. After some searching that ended up with nothing I designed a small and fast-to-print adapter for the CR1620 so I could use one of the many…
Needed a cr2032 battery but only had a cr1632 so I made this. Category: Electronics
This model allows a mounting of the Kistenberg's TRUCK STORAGE BIN 16 (KTR16) on perforated wall steel plates produced by the Element System. The KTR16 box:…
ER16 COLLET HOLDER 150x150 H20mm
Collet Organizers mixing ER25 and ER16
Trays to hold collets for ER11 and ER16 tool holders. Simply needed more tools for my cnc drawers.
A coin storage solution remixed to be compatible with the excellent gridfinity with pin system which requires no magnets: https://makerworld.com/en/models/440624#profileId-346300
CR1632 see remix for other batteries
This mount fits onto the battery cover of the Worx Landroid Plus WR167E 700 and holds a 20x10 cm paving stone as extra weight on the rear axle. This improves traction and stability, especially on slopes and slippery surfaces. Simply place…
I made this wrench some time ago when I was missing the correct 25 mm / ER16(A) wrench size to change collets on my AMB 1050FME milling motor. As I am only changing the collets and the print is pretty strong until now, I never bothered to…
Storage of ER16 collets with added labels for easier use
I needed a battery storage option for a lower profile drawer and almost every battery storage option I found had the batteries standing up so I designed one that allows them to lie flat. I gave a few mm clearance clearance to allow for…
It has a 4x2 pattern and (note) it has to be the topmost cup as you cannot stack one on top of it (otherwise I would have had to add 1 more height unit, which does not suit my needs). I need them very often, so they have to be at hand -…
Habe hier mal schnell einen Baggerarm nach gezeichnet für den Bruder Schaefer HR16 Gedruckt habe ich es mit PETG-CF Viel spaß beim Nachdrucken und über ein Like würde ich mich freuen
Der Rasenmäher hat sich ständig eingegraben. Drehen am Begrenzungsdraht wurde zum Drahtseilakt. Ich habe einen Rucksack konstruiert. Der Akkudeckel muss mit etwas Druck geschlossen werden. In den Rucksack habe ich alte Stahlplatten (ca.…
An ultra-compact CR1632 holder that can slip into a pocket or other small compartment. Holds 4 spare batteries while taking up very little space. The two halves are friction fit and stay together reliably while still being easy to peel…
Modeled to use a minimum of material and be dense.
A compact stand for X21 ER16 collets along with two spare A-type nuts. Step file attached in case you need to change quantity.
I really liked the wheel CAD Solutions Neumayr made since it looks nice, does not damage the original tires with screws, is functional in that it should have better traction due to the airless tire design and uses the original wheel…
Holds a single ER16 Collet + Holding Nut. Created in Autodesk Fusion360 with the GridfinityCreator Plugin. For labeling, text can be added/modified in the .3mf file. I added a filament change at the 34.6mm to increase visibility. Printed…
These are designed to bring organization to the machine room at Stockholm Makerspace Originally Published on YouMagine back in 2016, and designed a couple of years earlier, when I was still using SketchUp to make models.
A simple mounting bracket for the DrayTek Vigor165 VDSL-Modem. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: Yes Supports: Doesn't Matter Resolution: 0.2 Infill: 30% Filament: OVERTURE PLA White (Weiß) Category: Tool…
A tool I made for extracting stubborn MR16 LED bulbs out of their housing, which often have very little clearing between bulb and housing. Version 1 is very delicate, but requires just a 1-2mm clearing. Version 2 is recommended when you…
Special creation for an outdoor vivarium, exposing as little surface as possible for animals to hold on/climp to. Screw holes for surface mounting included, as well as some basic vent holes. Print in PETG (at least) to accomodate for…
clips in the side of the lightbars like the original holder. print four times for two bars.
I purchased a used SimDT 7inch DDU, the included mount was for Simagic and the Moza one would have been 30 dollars to ship and most likely wouldn't have worked, so I made this, sturdy, has up & down adjustment, and faster than getting it…
Remix of the Designer Towel Hook that fits a NOVA KOOL R1600 Refrigerator
I have created a ER16 collet rack for my mpcnc. The model was developed for milling but is also suitable for printing. Text has 2mm deepening also in german or without text.
Organize your CNC collets in drawers or desk with gridfinity bins. This bins have holes for 6x3mm magnets. The top bins surface is 5 degrees tilted. 3 types of bins: ER16 collets PG10 collets. General bin to store anythings you want If…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
Note: this model has been migrated from my Thingiverse account. It was made about three years ago. First I bought the wrong batteries. I wanted to replace the battery a few of my cartridges but I also wanted them to be easily replaceable…
1x2x3 Gridfinity collet block. Very compact storage for 8 ER16 collets. Empty Stackable
I had a growing pile of loose coin and button cells rolling around in drawers, so I designed this tidy little organiser to keep everything together. The model is compact, prints without supports, and has individual columns sized just…
A small endstop for the SBR16 linear rail system, designed to fit snugly over the end and screw down using M4 screws/bolts. Be aware that this is designed to be small and light and to stop some who is manually moving something on the rail…
this design is made to fit 2020 aluminum profile. you will need to add: Allen screws, NY lock nuts and t-slots lamp switch cable GU10_PAR16 socket all available on amazon I will update links in the future. Enjoy https://www.salvador-3d.com/
These are case designs for the Sweet16 and Super16 macropads by 1UPKeyboards . All three are marked as RC1 (release candidate 1) because I made them an age ago and haven't had a chance to update them since. These were designed for the…
ER16 Collet Holder. One model is a 4x4 grid and the other is a single holder that can be patterned out to make whatever size grid you need.
Firefly 1S FR16 Nano Baby Quad - battery holder GNB 720mAh - rotated 90 degrees.
2x2 Gridfinity battery holder for CR1632, CR2025 & CR2016 batteries. Includes coloured labels as separate parts for easy painting. The bin is 30mm high when measured from the drawer base. Printed on an MK4s with an MMU3 in Spool3D matte…
Battery holder for 18x CR1616 Batteries. Once filled, put a rubber band around the whole thing (long ways), to hold them securely in place. Also designed to be slightly shorter (on end) than a D sized battery, so it can fit inside a…
Ein Wandhalter für ER 16 Spannzangen mit Spannzangenhalter 100mm zur Wandmontage mit 2 Schrauben.
Customized version of http://www.thingiverse.com/thing:125509 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=125509 Instructions Using the following options: th = 2.5 r2 = 16 h0 = 80 Category: Sport &…
Print in TPU or PETG. Bench mount Tormach ER16 / 20 wrench holder.
A simple container for six CR1632 batteries.
Simple cupholder for Track Racer TR40 - TR160 simracing rig. It will fit in any 40mm/M8 aluminum profile. You need one t-nut and M8 bolt to attach it.
This is my Poolbilliard Lighting composed of a Duratruss Single DT 31/2-200 Pipe hanging from the ceiling. All electrical wiring passes inside this tube and is also hidden inside the custom 3D Printed clamps that holds the 8 x PAR16 Spots…
Adapter for the robot KUKA VKR16 R1610-2 (CYBERTECH) to hold the gripper SMC MHZ2-25C. The blueprints of the gripper are on the photos.
Remix of MBradys End Mill and ER11 Collet Organizer to use with ER16 collets It is only the upper tray (Drawer_3) that are changed One tray with 8 ER16 collets and 8 bits and one with 12 ER16 collets and 4 bits (and 2 small bit areas)…
I have upgraded the bracing kit for my snapmakerA350, so a revision of the sbr16 mod was also necessary. Suitable for the Snapmaker A350 new bed with installed bracing plates without quick swap kit! This time I wanted an adjustable…
