Search results: rb6

48 models

PrintablesTaylor

Echo RB60 Spreader Agitator

I believe I printed top down I printed with ASA and have been using it for about 1 season so far with good results.

Downloads: 515
Likes: 12
Rating: 5

Mamiya RB67 35mm Viewfinder Mask

A simple print that fits into the space above the Mamiya RB67's ground glass without interfering with any of its viewfinders to indicate framing for 35mm film through the RB/RZ67.

Downloads: 363
Likes: 30
Rating: 5

Order a print of this model

PrintablesPorterito27

F1 Red Bull RB6 2010

Maqueta del Red Bull de F1 2010

Downloads: 354
Likes: 27
Rating: 5

Order a print of this model

Printablesrodsgear

35mm Panoramic mask RB67 film back

Non-destructive and 100% reversible mod for original Mamiya RB67 PRO-S 6x7 film back to 35mm panoramic frames 24x68mm. If this was useful consider a donation of any amount.…

Downloads: 251
Likes: 29
Rating: 0

Order a print of this model

PrintablesDavidB75

RB67 Focus checking adapter

I had been looking for the original testplate for ages, and decided to give it a go. I designed it to be used with exisiting focus screen. Watch the video on how to use it below :-)

Downloads: 217
Likes: 19
Rating: 5

Order a print of this model

PrintablesDavidB75

RB67 Mask for instax square back

This aid makes it clear where the boundaries are when shooting Instax Square on RB67. Printed in Polycarbonate for strength and durability. Layer height: first layer 0.2mm, succeeding layers 0.05mm Temp: 225 (Polymaker PC-MAX) Bed: 100…

Downloads: 136
Likes: 17
Rating: 0

Order a print of this model

PrintablesCallandor

mamiya rb67 mount rear lens cap (tapered)

rear lens cap

Downloads: 129
Likes: 13
Rating: 5

Order a print of this model

PrintablesRayfor

ALPA RB67 Viewfinder Adapter

ALPA RB67 Viewfinder Adapter takes 78x78mm focus screen

Downloads: 124
Likes: 5
Rating: 0

Order a print of this model

PrintablesKieran Devlin

Mamiya RB67 Waist Level Finder Hood and Lid

This is a very crude and simple box, lid and adapter to fit a Mamiya RB67 while I was waiting for a good price on an OEM one. Nothing fancy but it worked.

Downloads: 106
Likes: 5
Rating: 0

Order a print of this model

Printablesrez_junior

Lens Back Cap for Mamiya RB67

Replacement back cap for a Mamiya Lens. Snug fit (tested using 127mm f/3.8 Sekor Lens) Printed in PETG for flexibility

Downloads: 100
Likes: 5
Rating: 0

Order a print of this model

PrintablesBogdanBogvzyan

Mamiya RB67 Pinhole camera for 6x7, 6x8 film back holders

21 May 2026 Update Fixed the clearances in the back mount — Pro SD backs now attach without any issues Removed the protruding “tooth” at the bottom of the mount that prevented early RB67 Pro backs from fitting properly Added a body…

Downloads: 95
Likes: 28
Rating: 0

Order a print of this model

PrintablesZanfar

Mamiya RB67 Pro / Pro S / Pro SD Back Cover

I started with @BerndPfeifer_2033527 's excellent remix, however, the RB67 has an interlock that doesn't allow the back catches to be disengaged unless the dark slide is installed (which the cover obviously doesn't have). This cover just…

Downloads: 86
Likes: 11
Rating: 0

Order a print of this model

PrintablesBerndPfeifer

Mamiya RB67 back cover

As I had no lid for the back opening of my RB67 I remixed DavidB75's focus adapter to a simple cover. I also added a second version that uses less material, but I have not tested that one yet.

Downloads: 86
Likes: 11
Rating: 5

Order a print of this model

Printablesartyfarty

Mamiya RB67 RZ67 Neck Strap to Peak Design

THIS THING IS PROVIDED "AS IS"! USE IT AT YOUR OWN RISK!!! I'm not responsible if your dear camera hits the ground! This is a two-piece adapter. Main body can easily withstand stretching load. It takes bending but may degrade if you bend…

Downloads: 83
Likes: 14
Rating: 3

Order a print of this model

Printablesmaf

Mamiya RB67 Pro-S Instant Film Back (using JollyLook square dev unit)

THIS MODEL REQUIRES THE JOLLYLOOK SQUARE DEV UNIT TO WORK This custom back allows for shooting Instax square film on the Mamiya RB67 (Pro-S tested only). The included dark slide allows the back to be changed out mid-cartridge. Note: I…

Downloads: 80
Likes: 17
Rating: 0

Order a print of this model

PrintablesToLoveLu

RB67 to Horseman Adapter

Adapts RB mount lens to Horseman board. slits on the side allow for the user to cock the lens using the lever model. I find it easier to mount the lever to the pin that rests at the top so that you can cock the lens by simply tilting the…

Downloads: 74
Likes: 11
Rating: 0

Order a print of this model

PrintablesJascha Eidam

Mamiya RB67 Pro S Filmback Shield

DOESN'T FIT THE Pro SD BACKS As the summary says. Printed mine upright in PETG with no supports on the insides. Snaps into place. Gratuitous chamfering because it's chamfers and also because my battery holder for my digital camera…

Downloads: 64
Likes: 7
Rating: 5

Order a print of this model

Printablesflip_lmb

Erbauer ERB690CSW Plunge Saw - Cover

Cover for Erbauer ERB690CSW Plunge Saw

Downloads: 59
Likes: 1
Rating: 5

Order a print of this model

Printablesrezvo

Echo RB60 Deflector (Clip)

Simple installation: just remove one bolt, insert the clip, and re-tighten. Designed to fit precisely the mounting point on the RB-60 frame. Reinforced geometry to resist bending under load. Printed with support.

Downloads: 58
Likes: 3
Rating: 0

Order a print of this model

PrintablesBarBarBarbucha

IRB6700

robot

Downloads: 56
Likes: 6
Rating: 0

Order a print of this model

PrintablesLIUZUN

Mamiya RB67 shoulder strap buckle

Use PETG to fill the print layer with 100% height 0.16mm

Downloads: 54
Likes: 6
Rating: 0

Order a print of this model

Printablesthinbegin

RB67 Chimney ShowerCap

The Mamiya RB67 camera has an accessory chimney viewfinder that is pretty awesome! Problem is, I can't find any evidence that the viewfinder eyepiece glass came with any sort of cap for protection from dust, debris, or other damage, so I…

Downloads: 49
Likes: 4
Rating: 0

Order a print of this model

Printablessalvagedcircuitry

Mamiya RB67 Focus Knob Original Tapered

This is the focus knob for the Mamiya RB67 medium format film camera. It is tapered identical to the original part.

Downloads: 46
Likes: 4
Rating: 0

Order a print of this model

PrintablesChrisE

Kyosho Ultima RB6 RB7 Front Bumper - Part# UM710 for RC Buggy

Replacement front Bumper for Kyosho RB6 and RB7

Downloads: 33
Likes: 0
Rating: 0

Order a print of this model

Printablesdigitalist

Mamiya RB67 Long Exposure System

After doing some research on taking exposures longer than 1 second with the Mamiya RB67, I was presented with two choices. The first purchasing the dual threaded cable release on Ebay for ~80$ USD (at the time of writing this) or manually…

Downloads: 31
Likes: 22
Rating: 0

Order a print of this model

PrintablesChrisE

Kyosho Ultima RB6 RB7 Extended Front Bumper - RC Buggy

one-to-one replacement with existing UM710 Kyosho Part

Downloads: 29
Likes: 5
Rating: 0

Order a print of this model

PrintablesAlex Agod

RB67 35mm panoramic and sprocket masks for 220 back

WARNING! These masks are not directly compatible with the 120 backs, the screw holes are in slightly different locations

Downloads: 28
Likes: 5
Rating: 0

Order a print of this model

PrintablesMrNordgren

Cold Shoe Adapter for Mamiya RB67 (Left Side Mount)

This is a custom cold shoe adapter designed to fit the left-side mount of the Mamiya RB67 , utilizing the same screw holes typically used for the camera strap lugs. The adapter allows you to attach light accessories, such as a light…

Downloads: 28
Likes: 3
Rating: 0

Order a print of this model

PrintablesKieran Devlin

Mamiya RB67 Grip Adapter mk.1

This is a simple adapter to use a universal slotted left hand grip with the Mamiya RB67 camera to limit rotating of the camera and help affix it to the grip if using a non OEM grip.

Downloads: 28
Likes: 3
Rating: 0

Order a print of this model

PrintablesMatthew Pierson

Mamiya RB67 chimney finder adapter for Bronica SQ-A Prism finder

Still a W.I.P. This adapter helps you mount your Bronica SQ-A prism finder onto your Mamiya RB67. You will need to dissasemble your RB67 chimney finder to get the base + two front screws. Once you have those, and have printed this, you…

Downloads: 27
Likes: 6
Rating: 0

Order a print of this model

Printablesflip_lmb

Erbauer ERB690CSW Plunge Saw - Camlock Adapter

Edit - I've added a V2 of the adapter which is slightly beefed up. Camlock adapter for the Erbauer ERB690CSW Plunge Saw. Print on it's base with no supports required.…

Downloads: 27
Likes: 2
Rating: 0

Order a print of this model

PrintablesGunbleR

RB18/RB618 belt clip

Improved belt clip for retevis RB18/RB618 walkie-talkie

Downloads: 26
Likes: 2
Rating: 0

Order a print of this model

PrintablesRayfor

Battery Holder for Mamiya RB67 Motor Back

Battery Holder for Mamiya RB67 Motor Back you might also need some 6mm metal ribbon as contact pads

Downloads: 24
Likes: 5
Rating: 0

Order a print of this model

PrintablesCatPadThai

Mamiya RB67 Viewfinder Mask for 135 film

A viewfinder mask for the Mamiya RB67 focusing screen; helps with composition when adapting 35mm(135 format film) to the 6x7 film back of the RB67. It masks the finder for a 1:2 panoramic aspect ratio and XPan crop. Print & Fitment…

Downloads: 24
Likes: 2
Rating: 0

Order a print of this model

Printablessalvagedcircuitry

Mamiya RB67 Focus Knob Square Profile

Focus knob for the Mamiya RB67 medium format film camera. It has a square profile unlike the tapered original part.

Downloads: 23
Likes: 1
Rating: 0

Order a print of this model

Printablesleviking

Mamiya RB67 Finder retaining logo bracket

I found a mamiya rb67 finder that didn't have the logo part that retains the finder to the camera, so I 3d printed it. It uses 2 M2 screws (I think the ones I used were M2x3) and they are screwed through the retaining bar, the finder, and…

Downloads: 23
Likes: 2
Rating: 0

Order a print of this model

Printablesrezvo

Echo RB60 Rubber Tips

3D model of replacement end caps for the legs of the Echo RB-60 spreader. The parts were printed in TPU with 5 wall layers, no supports required. The model contains a single cap, which can be duplicated in the slicer to print two at once.…

Downloads: 20
Likes: 1
Rating: 0

Order a print of this model

Printablesartyfarty

[WIP] Mamiya RB67 Arca plate stabilizer

This allows you to keep arca plate on your camera all the time. For now it's designed specifically to fit Smallrig 5365 plate. I'm planning to make it more universal, because i don't like this plate that much, so more updates soon. For…

Downloads: 19
Likes: 3
Rating: 0

Order a print of this model

PrintablesBerndPfeifer

Mamiya RB67 lens mounting mark

The tiny red lens mounting mark on my Mamiya RB67 got lost so I built a new one. Should also fit on the SD and SD pro, but I am not sure about that.

Downloads: 19
Likes: 2
Rating: 0

Order a print of this model

Printablesdigitalist

3D Printed Arduino Wireless Trigger for Mamiya RB67

The purpose of this project was to create a wireless trigger for the Mamiya RB67. I accomplished this by designing a 3D printed bracket for the servo motor and a hotshoe mount for the Arduino board and RF Receiver. Parts Manfrotto…

Downloads: 18
Likes: 12
Rating: 0

Order a print of this model

PrintablesSneeker88

Left hand Grip for Mamiya RB67 remixed from https://www.thingiverse.com/thing:2439779

Remix of https://www.thingiverse.com/thing:2439779. Left hand Grip for RB 67 Remixed to work with the larger and heaver RB67. Printed in PETG CF with 6 walls and 50% cubic infill

Downloads: 16
Likes: 3
Rating: 0

Order a print of this model

PrintablesRayfor

Battery holder for RB67 motor back

Downloads: 11
Likes: 2
Rating: 0

Order a print of this model

PrintablesDavidB75

RB67 DOF lever arm for Sekor C 127mm

It takes some dissasembly of the lens in order to fit this lever arm, i suggest you only do this if you know what you are doing! :-)

Downloads: 10
Likes: 2
Rating: 0

Order a print of this model

PrintablesMarc-Anthony

Focusing Knob for Mamiya RB67

While the stock focusing knob is just fine, a large focusing knob allows for not only a slightly shorter focusing throw, but also for easier tiny adjustments during critical focusing. The knob clears the mirror lever (which was one of the…

Downloads: 7
Likes: 1
Rating: 0

Order a print of this model

PrintablesSneeker88

RB67 generic Arca plate stabilizer base

remix to work with generic Arca plates in 2 positions I printed on a 45 with minimal support in PETG CF

Downloads: 4
Likes: 2
Rating: 0

Order a print of this model

Printables

Battery holder for RB67 motor back

Order a print of this model

Printables

Left hand Grip for Mamiya RB67 remixed from https://www.thingiverse.com/thing:2439779

Remix of https://www.thingiverse.com/thing:2439779. Left hand Grip for RB 67 Remixed to work with the larger and heaver RB67. Printed in PETG CF with 6 walls and 50% cubic infill

Order a print of this model

Printables

Mamiya RB67 Pro-S Instant Film Back (using JollyLook square dev unit)

Order a print of this model