P
PrintablesAleksotti
Flying Bear Reborn 2 fan duct V2 with cover 4010
Detail printing by entry down with supports. Layer height 0.2 mm Nozzle 0.4 mm
- Downloads
- 547
- Likes
- 31
- Rating
- 5
Search results: reborn
116 models
P
Printablesadamnant
Zombies, Revenant, Reborn Collection (DND/TTRPG)
These will need supports but I do my best to make them print friendly. Be mindful of weapons etc... when removing supports! Updates: Feb 20 added one more standard zombie in a custom pose Models in this collection: Standard Zombie x 3…
- Downloads
- 512
- Likes
- 79
- Rating
- 5
P
Printablesp1xelmonster
Flying Bear Reborn 2 Stealthburner Carriage
This model is a redesigned Voron Stealthburner X Carriage mount for the Flying Bear Reborn 2. The major goal of this redesign was to be able to use the wide Stealthburner ecosystem on the Reborn 2. Further goals were to preserve as much…
- Downloads
- 459
- Likes
- 67
- Rating
- 4.75
P
Printablespimpyourprinter
FlyingBear Reborn 2 air outlet
Official air outlets for Reborn 2. Just posted here for easy access
- Downloads
- 323
- Likes
- 15
- Rating
- 5
P
Printablestecnoculebras
Phoenix Reborn light box
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
- Downloads
- 303
- Likes
- 107
- Rating
- 5
P
Printablesp1xelmonster
Flying Bear Reborn 2 VzBoT Gantry Mod
1 Introduction This model introduces the VzBoT-Vz330 gantry to the Flying Bear Reborn 2. It enables the usage of the Vz-Printhead without changes. Key Features 180° rotated Vz330 - 2WD setup Support of the Vz-Printhead without further…
- Downloads
- 301
- Likes
- 96
- Rating
- 0
P
Printablesp1xelmonster
Flying Bear Reborn 2 MAK Vector Duct Mount
This model is a custom mount for the MAK Vector Duct for the Flying Bear Reborn 2. The MAK Vector Duct (slim version) uses a 5015 blower for part cooling and fits perfectly into the dimenions of the Reborn 2. Link to the MAK Vector Duct:…
- Downloads
- 288
- Likes
- 42
- Rating
- 5
P
Printablespimpyourprinter
FlyingBear Reborn 2 BLTouch support
Let me know if you like it!
- Downloads
- 251
- Likes
- 12
- Rating
- 0
P
PrintablesCD_FER
The Hive Reborn - Hex Storage
A cheaper and simpler version of the HIVE designed in fusion 360. Print List: 1x Hive Frame 1x Hive Drawer Buckets (add sizes together and it should add to 12) 1x Label (Use Inkscape or similar to edit) Print Settings: The Buckets can be…
- Downloads
- 228
- Likes
- 70
- Rating
- 5
P
PrintablesAndrei S.
FlyingBear Reborn 2 StealthBurner mount
Few mm of build volume on the Y rail will be lost. Additional hardware needed: pair M2.5x6 FHCS, few heat set inserts. Warning! Do not even attempt to fire it up before clearance check. Requires some hardware modifications: X endstop…
- Downloads
- 215
- Likes
- 42
- Rating
- 5
P
PrintablesSlushpuppy154
Flying Bear Reborn 2 Part Cooling Vent
The vents on these printers are incredibly fragile. They really should have the STL files available. These will do in a pinch. Mine were heat deformed in a thermal runaway event that you can find on Youtube. I asked support for the STL…
- Downloads
- 213
- Likes
- 12
- Rating
- 0
P
PrintablesT-MAN
Nerf Jolt REBORN!
The Nerf Jolt is one of my favorite blasters because of its compactness, cost, and reliability. One of the only things I don't like about it is it is not very accurate. This model allows you to simply clip a barrel onto the blaster and…
- Downloads
- 201
- Likes
- 44
- Rating
- 0
P
Printablespimpyourprinter
FlyingBear Reborn 2 top cover
DIY top cover, I'll soon provide build details
- Downloads
- 189
- Likes
- 38
- Rating
- 0
P
PrintablesTimofey Titovets
Ball Joint filament guide for 2020 profile (Flying bear reborn)
Filament guide for placing spool internally in the printer printed in place, no raft, no supports, for best thread quality use 0.16 layer height Print Settings Rafts: No Supports: No Infill: 25 Filament: U3Print PETG Category: 3D Printer…
- Downloads
- 182
- Likes
- 21
- Rating
- 3
P
PrintablesPichurin_ae
Flexible cable channel for Reborn 2
Flexible cable channel for Reborn 2 v1
- Downloads
- 173
- Likes
- 23
- Rating
- 0
P
Printablestecnoculebras
Dragon Reincarnation (Dragon Reborn) light box
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
- Downloads
- 172
- Likes
- 74
- Rating
- 0
P
Printablesp1xelmonster
Flying Bear Reborn 2 VzBoT Y Gantry Remix
This is a remix of the printed Y gantry parts of the VzBoT-Vz330 for the Flying Bear Reborn 2 VzBoT Gantry Mod . There are two different variants offered: Shaft variant 1 (SV1): To be used with M4 shoulder screw and hex nut (Mellow screw…
- Downloads
- 155
- Likes
- 24
- Rating
- 0
P
PrintablesExtra3D
HoneyComb Panel Reborn 2
The files for installing HoneyComb on the sidebar of the Reborn2 printer. It can be used for tools, electronics. You are limited only by your imagination
- Downloads
- 151
- Likes
- 37
- Rating
- 0
P
PrintablesSchnabulator
Flying Bear Reborn 2 linear rail mounting helper
Mounting helper for Flying Bear Reborn 2 Linear Rails Print with 15%iInfill Print of each and dont forget to adjust your Z-Offset after adjusting rails :)
- Downloads
- 150
- Likes
- 18
- Rating
- 0
P
PrintablesT-MAN
Jolt REBORN V3 and V4 (best yet!)
This is the third iteration of a project I have been working on. This one is the best I have made yet. I wanted my Jolt blaster to be a bit more accurate so I designed a folding barrel system. You seriously feel like James Bond when…
- Downloads
- 146
- Likes
- 15
- Rating
- 5
P
PrintablesHexus Smith
FlyingBear Reborn 2 Filament Guide
New version added, uses PTFE tube to avoid filament damage. I have placed spool inside my Reborn2. But there was a problem with filament tube, it slipping away and make problems for nozzle moving. this simple thing let me fix tube from…
- Downloads
- 144
- Likes
- 18
- Rating
- 5
P
PrintablesDaboh
FanDuct for Reborn 2
The original Fanducts did not hold for very long. One already broke while building the printer.. ;) This was the opportunity for me to design new ones with optimized cooling. I think they work quite well.
- Downloads
- 144
- Likes
- 8
- Rating
- 0
P
Printablesomnifarious905
The One Reborn (Bloodborne Fan Art)
This chaotic CatDog collection of corpses is freakin' MASSIVE! I actually enjoy this streak of Bloodborne characters that I'm doing, so I figured I'd get one of the harder ones done and over with. The One Reborn has similar concepts from…
- Downloads
- 143
- Likes
- 35
- Rating
- 0
P
PrintablesCrustreef
Cable management Reborn2
Requires two M3x 10 screws and two hammer nuts for assembly. ON THE REBORN2, I RECOMMEND INSTALLATION AT THE CENTER OF THE PROFILE Printed material: Petg,ABS,ASA
- Downloads
- 137
- Likes
- 31
- Rating
- 0
P
PrintablesHexus Smith
Reborn 2 Light Bar
Here is modified version of light bar for Flying Bear Reborn 2. Bigger angle for more light on table. Added some holes for nylon ties. Can be printed without any supports. Use 2 Tnut and m3 bolts for mount. Print Settings Printer: Reborn…
- Downloads
- 118
- Likes
- 17
- Rating
- 5
P
PrintablesSlushpuppy154
Flying Bear Reborn 2 Filament Sensor Clip
This clip helps to keep the filament sensor from getting bound up. If you use a filament dryer with a tube feed to the sensor, the drag can pull the sensor out of alignment and cause more drag in the tube that leads from the sensor to the…
- Downloads
- 111
- Likes
- 9
- Rating
- 4.67
P
PrintablesHash Bringer
Flying Bear Reborn 2 BIQU Microprobe mount.
Modified file from @Pixelmonster uploaded microprobe mount so it would fit CHC Pro volcano hot end. Proof of concept was printed in PETG, after-wards printed it in ASA (for use in enclosed printer), so strongly advise to prin in similar…
- Downloads
- 111
- Likes
- 8
- Rating
- 0
P
Printableslucan07
Flyiing Bear Reborn 2 Hot End Upgrade
Needing to repace hotend on Flying Bear Reborn 2, a quick hot end replacement. Using Drill, Hacksaw, Alan Key, Plyers & Sandpaper I designed and built adapter plate in 30 minutes. A CNC relacement will be fitted as soon as I get A Round…
- Downloads
- 106
- Likes
- 6
- Rating
- 0
P
Printablesichoso
Reborn 2 Printhead (cpap cooling, bl-touch, chc pro, sherpa mini)
DON'T DO THIS IF YOU DON'T KNOW WHAT YOUR DOING!!! IF SOMETHING GOES WRONG IT'S NOT MY RESPONSIBILITY!!! I remixed it from ( https://www.thingiverse.com/thing:5854242 ). you need 4x m2.5x16 and some m3 screws. you need heat insert 3x4x5.…
- Downloads
- 99
- Likes
- 21
- Rating
- 0
P
PrintablesGrandFather
Ashes Reborn: Rise of the Phoenixborn & Red Rains Insert / Organizer
This insert is designed to fit into the Ashes Reborn: Rise of the Phoenixborns Master Set box. Space has been reserved for the Chimera board from Red Rains: The Corpse of Viros and the three manuals. This insert supports sleeved cards,…
- Downloads
- 94
- Likes
- 9
- Rating
- 0
P
PrintablesKai
Flying Bear Reborn 2 Anti Vibration Pad (or for other 40mm feet)
Simple pad for round 40mm feet to decouple them from the floor. Meant to be printed in TPU. I made them for my printer so the vibration won't propagate through the floor. My print parameters: Filament TPU 95A Line Width 0,6 mm Walls 2…
- Downloads
- 93
- Likes
- 17
- Rating
- 5
P
PrintablesAntrim3d
Reborn2 Interior Spool Holders
Spool Holder Mod for the Interior of a Flying Bear Reborn 2. (Any printer really...M4 Bolt & T-nut to 2020 Alum profile.) There is no L or R to these. Printed out of ABS. Designed in TinkerCad. I'm not a 3D modeler by any means. Be Kind.…
- Downloads
- 93
- Likes
- 14
- Rating
- 5
P
PrintablesAntrim3d
Reborn 2 TPU Foot
TPU foot to cradle existing stock foot on a Flying Bear Reborn 2. I've included the .3mf project file that I used on BL X1C. Designed in TinkerCad. I'm not a 3d modeler by any means. Be kind :) I also designed an 8mm hole in the center of…
- Downloads
- 85
- Likes
- 7
- Rating
- 0
P
PrintablesVM
EBP Reborn - Ender 3 / Sherpa Mini / Volcano printhead
EBP Reborn - Ender 3 / Sherpa Mini / Volcano printhead Original K3D EBP model by Sorkin has been significantly reworked to achieve following goals: more compact and lightweight design improved balance by moving motor to the back of X…
- Downloads
- 79
- Likes
- 15
- Rating
- 0
P
PrintablesGreyBear
Flying Bear Reborn 2 MAK Vector Duct Mount with BL Touch holder
MAK Vector Duct holder with added BLTouch
- Downloads
- 77
- Likes
- 8
- Rating
- 0
P
PrintablesDocKuro
Flyingbear Reborn BLTouch mount
A very simple mount for a BLTouch, or clone, probe for the flyingbear reborn. The fit is pretty tight, but I aimed to avoid all possible collisions with the stepper motors and the belts, this iteration should solve all the collision…
- Downloads
- 74
- Likes
- 8
- Rating
- 0
P
PrintablesNathan22211
FLying bear reborn 2 volcano mod
A volcano mod for the flying bear reborn 2. BOM: x1 volcano heater block that accepts a pt1000 x4 m2x16 screws x1 volcano to v6 adapter (optional) X2 z endstop tab extensions (mirror one of them and print on largest face out of PETG or…
- Downloads
- 74
- Likes
- 6
- Rating
- 0
P
PrintablesAndys1957
Reborn2 adjustable sensor support
Flying Bear bietet seit einiger Zeit für den Reborn2 einen Umrüstsatz für Auto Bed Leveling an. Der Sensor mit Halter sowie auch eine beschichtete magnetische Federstahlplatte können im Shop erworben werden. Der Halter kann auch selbst…
- Downloads
- 71
- Likes
- 4
- Rating
- 0
P
PrintablesYuri Y
StealthBurner Mount FlyingBear Reborn
Крепление StealthBurner для FlyingBear Reborn
- Downloads
- 69
- Likes
- 10
- Rating
- 0
P
Printablesrsmith_nl
Improved airbox lid for Royal Enfield Classic 350 reborn
Designed to replace the OEM airbox cover, this one has a larger opening and less restricted airflow. It works with the stock air filter. With this airbox cover, the engine picks up better and the bike reaches 100 kph with less effort. The…
- Downloads
- 68
- Likes
- 6
- Rating
- 0
P
PrintablesDaboh
MicroProbe Mount Reborn 2
Mount for BIQU MicroProbe for the Reborn 2 without any lose of printspace. Offsets: x_offset: 39.0 y_offset: 0.0
- Downloads
- 66
- Likes
- 6
- Rating
- 0
P
PrintablesEvgenius
Reborn 2 Volcano mod | Fanduct V3
Reborn 2 Volcano mod | Fanduct V3 Это обновление позволит проще печатать эти водуховоды от стола. В предыдущей версии я мало уделил этому времени. Так-же я изменил немного площадь выходного отверстия. В предыдущей версии оно было слегка…
- Downloads
- 63
- Likes
- 3
- Rating
- 0
P
PrintablesCrypter
Updated Fan Head and Body for Reborn 2 - Top 2025
Updated Fan Head and Body for Reborn 2
- Downloads
- 62
- Likes
- 6
- Rating
- 0
P
PrintablesMorrisRX
Flying Bear Reborn 3 Cap Mod
This mod is for Reborn 3 (but may also be suitable for Reborn 2). There is a whole model and divided into 4 parts for easy printing. You only need to add a sheet of transparent plastic or glass, size 400x500 mm. Print from PETG or ABS…
- Downloads
- 60
- Likes
- 14
- Rating
- 0
P
PrintablesPhalanx Operative
Nemesis Reborn sign
Entrance sign for Alton Tower's coaster, Nemesis
- Downloads
- 60
- Likes
- 1
- Rating
- 0
P
PrintablesShrapnel Warning
dragonburner mount for reborn 2
Assembly is nearly identical to the steathburner mount I built this remix from. Screw lengths might differ from the original mount. I'll update with exact hardware length's next time I do some maintenance on it. Print in abs or asa with…
- Downloads
- 58
- Likes
- 18
- Rating
- 5
P
PrintablesKai
WobbleX Adapter for Flying Bear Reborn 2
WobbleX Adapter for Flying Bear Reborn 2
- Downloads
- 57
- Likes
- 18
- Rating
- 0
P
Printablesminilogique
Electronics compartment for Flying Bear Reborn 2 (or any other if you change some parameters)
ATTENTION - cooling fan changes coming soon. Also increased the depth of the current fan mounts in case you want to swap them out thus there's enough room for a printed adapter sheet for a smaller version. Might actually ditch the…
- Downloads
- 57
- Likes
- 17
- Rating
- 4
P
PrintablesRobert Krüger
Flying Bear Reborn 2 MAK Vector Duct Mount
Just mashed the two things together. Should work with original scews (or shorter, cant remember) Made insertholes smaler
- Downloads
- 53
- Likes
- 2
- Rating
- 0
P
PrintablesDi-Shiper
3D printer tool holder v2 (Reborn 2 and other)
3D printer tool holder v2 (Reborn 2 and other.
- Downloads
- 52
- Likes
- 8
- Rating
- 0
P
PrintablesJaySnig
Reborn 2 stealthburner chain link
chainlink (25 pieces if you mount at the middle of back side) and clip you can download here https://mods.vorondesign.com/details/2fZa8rooutB5ZV3Rcz9w Better use Start with chain stop 3 M3x6 Countersunk screws for end 2 M3x10 and 2 T-nut
- Downloads
- 52
- Likes
- 12
- Rating
- 0
P
PrintablesT-MAN
JOLT REBORN V2
I fixed a few key problems of the V1. The first being that the barrel doesn't rotate nearly as much as before due to the two flaps on the sides. It also clamps a little better so it won't just fall off like the old one did occasionally. I…
- Downloads
- 50
- Likes
- 5
- Rating
- 0
P
PrintablesCheeseburgerock
Flyingbear Reborn 40mm hotend fan mod
Original author's project: https://www.thingiverse.com/thing:5177819 Eng: Changes made: 40mm fan is used for hot end Increased strength of cooling nozzles Flaws: Reduced print area along the X axis by 15mm (when installing a 4020 fan, the…
- Downloads
- 50
- Likes
- 9
- Rating
- 0
P
PrintablesМаксим Рассказов
Lock system for filament extruder Flying Bear Ghost6 / S1 / Reborn 3
Replacing the standard thread clamping system with a simple and convenient one in printers Flying Bear Ghost6 Flying Bear S1 Flying Bear Reborn 3 Does not require additional materials. No need supports. Print material PETG or ABS. It…
- Downloads
- 49
- Likes
- 11
- Rating
- 0
P
Printablessazhnikoff
FlyingBear Reborn 2 - 82mm Spool Holder / Adapter
Adapter for stock Holder
- Downloads
- 49
- Likes
- 10
- Rating
- 0
P
PrintablesSebastián Horváth
Army Attack Reborn - ACP
Hi! This is my first vehicle model, so it has some problems that must be dealt with in the future. First of all, you need to have two more components that aren't printable and those are: -M4 Nut -M4*35 screw at least +little bit of spare…
- Downloads
- 48
- Likes
- 7
- Rating
- 0
P
PrintablesMr.Ray
Aldarra Reborn Flint Class Airship
a Cin'dar Navy Flint class engineering airship for Aldarra Reborn
- Downloads
- 46
- Likes
- 7
- Rating
- 0
P
PrintablesDocKuro
Corner bracket for Flyingbear Reborn
I remixed the original to fit the frame of my printer, reducing the space between the hole and the top, also I modified the holes to use M3 screws
- Downloads
- 44
- Likes
- 3
- Rating
- 0
P
PrintablesEvgenius
Reborn 2 Volcano mod
Давно уже думал о том, чтобы установить вулкан на Reborn 2. Наконец-то я это сделал. Только учтите, что под пластинки, которые размыкают концевики по оси Z, необходимо установить проставки! Проставки:…
- Downloads
- 43
- Likes
- 9
- Rating
- 0
P
PrintablesGeekGeek23
Magbases reborn
First: I did NOT design the bases myself. I just added holes for magnets. You can find the original ones by “brexit” here: https://www.thingiverse.com/thing:3012828/files Every base should have a magnet on the bottom. Why? Easy mounting…
- Downloads
- 43
- Likes
- 4
- Rating
- 0
P
PrintablesFunky3D
Reborn 2 Spool Roller
This spool holder is made to be fully printed. The bearing ( remixed from Emmett's one ) comes with two different tolerances, one with 0.2 mm and the other with 0.25 mm for convenience, just in case. All objects are optimized for a layer…
- Downloads
- 43
- Likes
- 5
- Rating
- 0
P
Printablesbluebyte79
Flying Bear Reborn 2 Biqu Microprobe Mount
I remixed the mount for the microprobe because the pin of the probe is very short which made it impossible for me to get the right distance to the printing bed. So I made the height of the mount adjustable. Use a washer with the original…
- Downloads
- 43
- Likes
- 4
- Rating
- 0
P
PrintablesHexus Smith
FlyingBear Reborn2 Z-endstop
Due to the modification of the hotbed, the old endstop flags were too short. To correct this issue and account for the additional 10 mm in height, I have designed new endstop flags that are much longer. Print Settings Printer Brand:…
- Downloads
- 41
- Likes
- 9
- Rating
- 0
P
PrintablesAl Printfast
Reborn 2 LED mount under door beam
This mount for LED stripes is intended for mounting under the door beam. I glued the stripes on the mounts after soldering it correctly. My first used PETG but the stripes wont glue to it, so i printed it in ABSx from NOBUFIL again and…
- Downloads
- 40
- Likes
- 11
- Rating
- 0
P
PrintablesAl Printfast
Reborn 2 TFT 4.3inch housing fits as the original
Dieses ist ein Austauschmodell des originalen TFT Rahmens um statt nur 3inch eine 4,3inch Bildschirmgröße ohne Bearbeitung oder gar Austausch der Türen beim Flying Bear Reborn2 zu bekommen. Ich habe einen günstigen Waveshare 4.3 inch DSI…
- Downloads
- 39
- Likes
- 9
- Rating
- 5
P
Printables3D_Devil
Reborn 2 Hotbed build plate stop Update
Update 3/11/2024 Modified rear to be thinner for clearance if you like me have spools inside Updated build plate stops - Just mirror for other side. I used 2 M3 with washers and m3 nuts. Fits on existing holes on bed plate - Use ASA or…
- Downloads
- 38
- Likes
- 6
- Rating
- 5
P
PrintablesJaveLiner
ADXL345 FB Reborn2 mount
It is fixed by closest fan screws. Plate holes are designed to accomodate 2 DIN912 Hex M3*6 screws without nut to hold ADXL345 or GY-91. The height of the plate is 4 mm - just enough for thread. Keep in mind when soldering that there…
- Downloads
- 37
- Likes
- 3
- Rating
- 0
P
PrintablesPichurin_ae
7" KlipperScreen for Reborn 2
7" KlipperScreen for Reborn 2
- Downloads
- 35
- Likes
- 6
- Rating
- 0
P
Printablesichoso
upgrades reborn 2
to let this work you some m3 screws and heatinserts. If put heatsink on the X and Y steppermotors so i can set the AMPS of X and Y steppermotors higher. that means more torque and higher speed but the stepper motor become hot so thats why…
- Downloads
- 34
- Likes
- 8
- Rating
- 0
P
PrintablesQuadrock Quadrock
Adapterplate original MKS board to Manat M8P (for flyingbear reborn 2)
I wanted to upgrade my flyingbear reborn2 to klipper and decided to use the manta M8P. I couldn't find an adapter to mount this on the original MKS board holder. So I did this myself. I removed the right screw of the relay and tilted it a…
- Downloads
- 33
- Likes
- 5
- Rating
- 0
P
PrintablesTimofey Titovets
Flyingbear Reborn 10mm External Motor Adapter
Versions: PoC Add more rigid making it a good fit Make it more rigid, slightly increase the size by 3 mm, and move the Left motor down by 3 mm. Add a hole for the belt tensioner. Have misplaced wall hooks - deleted Add wall offset for a…
- Downloads
- 32
- Likes
- 12
- Rating
- 0
P
PrintablesEjector_Seat
Nemesis Reborn Logo
In the slicer but the logo on top of the stand and scale up is necessary! no supports
- Downloads
- 32
- Likes
- 2
- Rating
- 0
P
PrintablesDi-Shiper
FlyingBear Reborn 2 spool holder
FlyingBear Reborn 2 spool holder.
- Downloads
- 31
- Likes
- 5
- Rating
- 0
P
PrintablesAXUL
Fysetc Input Shaper adapter for 3010 with MAK Vector on FlyingBear Reborn 2
Made this adapter to fit the Fysetc Portable Input Shaper over the 3010 cooler, and with enough clearance for MAK Vector duct on my FlyingBear Reborn 2 3D printer.
- Downloads
- 30
- Likes
- 6
- Rating
- 0
P
PrintablesRobert Krüger
Reborn 2 "sazhnikoff" Spoolholder Backplate
I designed this quick and dirty in 3D Builder to mount sazhnikoffs Model (https://www.printables.com/model/655395-flyingbear-reborn-2-82mm-spool-holder-adapter) onto the plastic panel of my Reborn. The long part of this model has to point…
- Downloads
- 29
- Likes
- 7
- Rating
- 0
P
PrintablesAl Printfast
Reborn 2 mount for BTT SFS v2 Filament Sensor
Halterung für einen BTT SFS v2 Filamentsensor genau über dem Extruder. Holder for a BTT SFS v2 filament sensor right above the extruder.
- Downloads
- 28
- Likes
- 4
- Rating
- 5
P
PrintablesPichurin_ae
Klipper box for Reborn 2
This model is a control box, includes: - Two places for power supplies with a size of 58x85x32mm. - Three landing pads for the MOSFET. - Raspberry pi or Orange pi pad - Installation location of the 220V solid-state relay the cover…
- Downloads
- 28
- Likes
- 3
- Rating
- 0
P
PrintablesAKarel
Flying Bear Reborn 2 Plastic mount for filament sensor and feed tube
Plastic mount for filament sensor and feed tube
- Downloads
- 27
- Likes
- 5
- Rating
- 0
P
PrintablesEvan Joyce
Reborn as a Vending Machine - Crocodile Boss Coin
This is the crocodile boss coin from the anime "Reborn as a Vending Machine I Now Wander the Dungeon". I did a filament swap to get two colors. It has 2 parts The main part with the design, where I added a pause to change from black…
- Downloads
- 27
- Likes
- 9
- Rating
- 0
P
PrintablesRobert Krüger
Flying Bear Reborn 2 Filament guide
Since it was a pain to feed the filament through the runout sensor und then into the PTFE tube i made this screw-on-guide.
- Downloads
- 27
- Likes
- 4
- Rating
- 0
P
PrintablesAKarel
Flying Bear Reborn 2 Plastic Fan Mount with ADSL
Plastic Fan Mount with ADSL for Flying Bear Reborn 2
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesÁron Pozsár
Reborn
Check out the print timelapse and support removal video here . If you like this this one, check out my other string art models here . This print is pretty difficult to set up properly so please just use the prepared 3mf file that contains…
- Downloads
- 25
- Likes
- 4
- Rating
- 0
P
Printablesjankowski-t
MeshAdventurer Reborn enclosure for Meshtastic
The board design is available at GitHub .
- Downloads
- 23
- Likes
- 4
- Rating
- 0
P
PrintablesZsóka
Flying Bear Reborn 2 reel seat
A modified spool holder that can be used without swinging the filament. It is advisable to stick anti-slip tape on the roll holder or coat it thinly with adhesive gel. Módosított orsótartó, amelyen az filmamentorsó lengés nélkül…
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesHomee
Dragon Reborn
A fierce-looking winged dragon designed as a decorative 3D print. it's suitable both as a desk ornament and as a centerpiece for fantasy collections.
- Downloads
- 22
- Likes
- 5
- Rating
- 0
P
Printablespseudo6626
CuLPA Reborn
Overview: The CuLPA is a customizable ecosystem solution for mounting common extruder and hotend upgrades to the existing Artillery x-axis gantry. The design consists of two main components: The CuLPA backplate. This part mounts to the…
- Downloads
- 21
- Likes
- 7
- Rating
- 0
P
Printablesminilogique
Adjustable front Z-stepper plates for Flying Bear Reborn 2, also fits Voron 1.x/Trident/2.4
I rebuilt my Flying Bear Reborn 2 into a very custom Voron Trident 350. At some point it was time to replace the old dual-Z with the Trident's triple. To make thing fit and line up properly, I worked out these modified Z-stepper plates.…
- Downloads
- 20
- Likes
- 10
- Rating
- 0
P
PrintablesTimofey Titovets
Flying Bear Reborn: Z motor washer
Must be placed at bottom of Z motor bearing, spring washer must be placed above top bearing That will just work, in theory, that will remove some sort of Z vertical play Category: 3D Printer Parts
- Downloads
- 20
- Likes
- 3
- Rating
- 0
P
PrintablesAl Printfast
Reborn 2 Mount for Nevermoore Filter + Bouwden and Canbus-cable clip
Mount for Nevermoore Filter behind the printbed i reused the original metal holder (fit behind this holder, screwed with t-nut to the top beam) Flying Bear used it for the bouwden insert, also fix bouwden and Canbus-cable out of the way
- Downloads
- 20
- Likes
- 5
- Rating
- 0
P
PrintablesTaras Sidorenko
Box FlyingBear Reborn 1
Attaches with double-sided tape on the left side. There is a groove for a spatula, tweezers and wire cutters.
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesLucio Badtaste
Octogo Reborn
Octogo is an abstract strategy board game published in 1985 by a small, now-defunct UK company called "Octogo Games." It resembles checkers but with some interesting additions. The pieces are cubes with an arrow indicating their…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
Printablestom3dmodel
Darth Vader Reborn Bust
A dark reimagining of Darth Vader with his iconic helmet partially revealing a heavily damaged skull and exposed cybernetic mechanisms. The bust combines the classic Vader armor with cracked bone, mechanical components, worn details and a…
- Downloads
- 18
- Likes
- 10
- Rating
- 0
P
PrintablesAl Printfast
Reborn 2 Mount for XL4016E1 DC-DC Step Down Buck Converter inside the reborn2 electronic box
Mount for AZDelivery XL4016E1 DC-DC Step Down Buck Converter to power RPI4 with DSI Display and cam. Mounted inside the original Reborn 2 electronics box. Screwed with t-nuts to the right beam, the AZDelivery XL4016E1 DC-DC Step Down Buck…
- Downloads
- 18
- Likes
- 1
- Rating
- 0
P
PrintablesEvgenius
Reborn 2 Volcano mod
Проставки для флажков концевиков чтобы установить нагревательный блок от Volcano наReborn 2. Так-же рекомендую установить хороший обдув: https://www.printables.com/model/1033537-reborn-2-volcano-mod
- Downloads
- 16
- Likes
- 1
- Rating
- 0