Counting matching models…
This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…
This small, charming reindeer figure is a lovely decoration for your windowsill or a festive Christmas table. It is quick and easy to print, and its minimalist design gives it an elegant, high-quality appearance. It also looks great when…
🦌 Minimalist Low Poly Reindeer Sculpture For all fans of my minimalist sculptures… today I’m releasing another Low Poly model ! This reindeer fits beautifully into the Christmas season, but also works perfectly as a timeless decorative…
IMPORTANT - VERSION INFORMATION This listing represent V1, the main and current version of the system. An earlier ''Early Release'' version is still included as a legacy option for users who only want a press-fit, tool-free assembly.…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
This is a model of the czech freight wagon EAS suitable for H0 railway models. It is possible to print it using SLA or FFF printer. See more info at: https://blog.prusaprinters.org/3d-printed-railway-models-part-ii-trains-and-buildings/…
It's a pastry cutter. It's very simple. Height is 5.8 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
Here are a set of files I made to bring Gridfinity to the new Harbor Freight US General Mini Toolboxes! There are 3 grid base files that will allow you to add your own gridfinity organization to your mini toolboxes you can also split the…
CUTE KNITTED REINDEER - Print-in-place - Minimal supports required Join my Patreon to get full access!
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
A simple but cute Christmas reindeer. Put a Ferrero Rocher into it and give it away as a cute present! Features Cute design Easy to print Two versions: Default and fuzzy skin Last minute gift Recommended print settings (or just use the…
Here is a reinforced replacement for broken kitchen hinge. You don't need to use any supports to print it. I printed it with these parameters: - 0,2 mm layers height - 6 walls - 30 % infill Please give it a 💖 if you like it 🥰
Wichtig! Jegliche kommerzielle Nutzung meines Designs ohne mein Einverständnis ist untersagt!!! Der Abstreifer kann ab sofort bei der Firma Just Printing gekauft werden! Diese Abstreifer werden vakuumentgast und im…
MODEL DETAILS This is a festive model that doubles as a stress test for your 3D Printer. If you liked this model, why not try our other stress tests too? RECOMMENDED PRINT SETTINGS A 0.6 Nozzle or smaller is recommended when at 100%…
The original Articulated Shark was a little to wibbly wobbly in the up down articulation for my little nephew to play with. I added some additional parts to stiffen the shark out quite a bit. It is still just as wibbly wobbly going side…
This is a model of the Atreides Signet Ring from the movie Dune. You can find more of our Dune models like the box of pain or bull statue here The download contains the model ready to be 3D printed. It is placed on the print bed as we…
Introducing a sleek and robust truss structure style table reinforcement for Ikea's iconic Lack table. Increases stability and reduce shaking. Technical Details: Material Recommendation: PET-G or PLA. Installation Requirements: 64 screws…
This is 3D printable model of the Sovereing Class NCC-1701-E Enterprise from the Star Trek. It is a kit. Apart from the thrusters, which have to be glued in place, there is no further need for any glue and the model could be assembled as…
First of all, I am not the initial creator and only did some adjustments specially for Prusa Printers all credits for this awesome work please to this Guy: https://www.thingiverse.com/thing:3356047 Hello all, I still feel that MMU2s…
I had made a few of these(original non-reinforced version) for my son and his friends, and was annoyed with the tail popping out. Looked for a remix that was fixed, and found this stable version. Reading through the comments I saw that…
This is my version of a reindeer head. It seems like there is a nearly similar version, but this is made by a special computerprogramm so not copied. It was made with a free vector picture. Enjoy printing. View my other models too.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
The existing reinforcements aren't bad but ensure only that the Legs can't turn, with no support for actual stability or reduced shaking. My created reinforcements increase the overall stability and reduce shaking/wobbling, especially for…
This updated version of my original 'Wallhook' makes it even stronger than before, and featuring rounded edges that provide a cleaner look while reducing stress concentration points in the plastic. I have integrated two dedicated screw…
Holders for the sockets, torx, allens, extensions, and adapters
A remix of a great spoon rest! Due to the orientation of the print (flat), the rest 'nibs' are a weakness. One of them broke for me on the original during a wash. Remix Changes Thicker rest wall (+1mm) Support ribs Links & Reference…
You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…
This remix improves on a few areas that made printing the original design very difficult. feet have been made flat on the bottom and even, so deer stands in a more stable manner custom supports have been made more substantial to provide…
Printing I printed the bins with both 0.4 mm and 0.6 mm nozzles, both work fine. There are all variations of the bins from 1x1x1 to 7x7x10, in regular- and half-grid variations (although most are obviously untested). Recommended settings…
No MMU needed. Designed at 100% to match the existing Giant Lego Wreath, printed at 170% with 0,2mm layer height. Easter Bunny No support needed. There are 2 different Bunnies available. Version 2 has an optional tail. You can also use…
Please click ❤LIKE❤ if you appreciate my work 😊 Strong and reliable reinforced corner brackets for everyday DIY projects. Includes two versions: a compact 2-screw bracket and a 4-screw heavy-duty version for increased strength and…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
No support needed. Use 4x20 mm wood screws without predrilling.
Check out more models from Phone collection https://www.printables.com/@C47_3d/collections/793008 and Xmas collection https://www.printables.com/@C47_3d/collections/155488 --- If you want to sell prints of this models you can buy a…
UPDATE 02/08/2023: Uploaded a V3 repaired frame file as there was an issue with the V2. The Spool Winder by Les Kaye is a great model, but there were a few things I wanted to do differently, so here we go. First, I redesigned the frame to…
Fellow Creality K1 Owners, Yup, that's right! Yet another take on mounting both the spool holder on the side of the Creality K1. With the original, I noticed that the spool was sagging. So with this model it has 4 points of attachment to…
I printed this model with a white PLA, 0.4 nozzle, 0.2 line width and organic supports on. I added a cylinder for each leg to improve the first layer adesion and help the model to stand. My first print was downscaled to a 10cm model, and…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) MINI REINDEER Say hello to…
Rudolph 🦌, the red-nosed reindeer, shines bright as the hero of Christmas Eve! With his glowing nose and cheerful spirit, he leads Santa's sleigh and spreads holiday magic everywhere. 🎄✨
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
For engraving up to 11 pens or ballpoint pens simultaneously with the xTool F1. A placement map for xTool Creative Space is also available. Update: The placement map file has been updated for xTool Creative Space 2.x, including grouped…
I made a 2nd remix of this beautiful Spyro the Dragon full multi material model with way more details (he got more dragon scales on his back) and some corrected anatomy. Besides increasing the details I also sliced him into 2 parts and…
A strong and practical 3D printable wall hook designed for secure mounting and heavy-duty everyday use. The reinforced triangular structure provides excellent strength, stability, and durability while keeping the design compact. Perfect…
Reinforced version of side spool holder with option to attach side bin
Reindeer are a staple of the holiday season. These models are unique and work well in any scenario. You can hang them on a tree, or just place them on a table. The base model used for this design is a composite of multiple others I had…
Reindeer headband. The size was based on a child's headband I used as reference. Scale as needed. The 3mf file includes two headbands, both 90% XY scale. These two fit on a Prusa MK3S bed, barely. They take around 1 hour each when printed…
A reinforced bookend (for taller or heavier books) with a honeycomb pattern on the visible face. No supports required, no post-processing. Just a clean and simple print. The visible face is about 120mm wide by 140mm tall. The base is…
Rugged Box adapted for 3/4/5 passports In the pictures you see 4 german passports with standard dimensions ---------------------------------------------------------------- 11/05/25 - Files added for 3 passports…
I was tired of wasting filament and time for printing several different models of this case which had very weak hinges and broke instantly, so I fired up Sharpr3D and fixed the hinge issue myself. There is also a clip to close the case…
Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
Full credit to dkarjadi for his original design which can be found here . What is it? This model is an upgraded chamber light to "assist" the wimpy one that comes with the Bambu X1/X1 Carbon and the P1S. Printed in grey ASA, gaskets in…
🧩 NASA-Style Hexagonal Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a NASA-style hexagonal flexible mesh , designed from scratch in…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
A 19-inch Reinforced Modular Rack Mount Blanks. This is the beefier version of the regular 19-inch modular blanks , for those who need the extra strength. I have added a .3MF project file as well. This mount is part of a 19-inch modular…
30% less material, 30% more space. If you use these custom grids with the custom bins I have modified you will get maximum storage space out of your mini toolbox. Bins for top and middle drawer are 20mm in height. The bins for the bottom…
⚙ Print Settings & Advice: * Orientation: Position the model flat on the bed to ensure the screw holes and reinforcing rib print perfectly without any support material. * Perimeters (Walls): Min. 4 perimeters for extra rigidity. *…
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
The original coffee scoop that I used for some two years broke at the connection between the handle and the measure cup, so I did a redesign using Fusion 360, preserving the original dimensions.
Based on the blade used by Duncan Idaho in the desert tunnel. Intended to be assembled with two ¼" (6mm) dowels. Overall length is approximately 30.5" (776.4mm). There are two versions of the STL. One has been broken into parts with a max…
Original Sci-Fi Spaceship – 3D Printable Model This is a highly detailed, 3D-printable sci-fi spaceship , inspired by the classic look and feel of iconic science fiction movies from the late 20th century. The design is an original…
Diese eleganten LED-Ostereier überzeugen durch ein feines, geripptes und modernes Design. Sie sorgen für eine warme, stimmungsvolle Beleuchtung und sind perfekt als Oster- und Frühlingsdekoration geeignet. Das Modell ist in zwei…
Reindeer napkin holder for Christmas. Or why not every other time as well.
2 sizes of crates that I created to be used as freight on a model train wagon note the little hole in the bottom is intentional, it allows you to put a toothpick in there and handle it more easely when painting. Designed for Prusa MK3s+…
The IKEA Lack table is used by many makers to build a 3D printer enclosure. But the table is lacking stability, the legs are not connected to the table tightly enough. By the time the connecting screw gets even looser in the soft (pressed…
This model is compatible with the lego system.
As a lover of this “DIY Sortimo” System, I wanted to make some bins that were easy/quick to print and could function for both larger and smaller parts. These boxes improve the utility and capacity of the standard harbor freight boxes.…
This remix thickens the loop to reduce the change of breakage via wear and tear.
A remix of Hajo's most excellent bird water feeder. Like Hajo's original post, all the other bird drink machines that I found drained in seconds, but this one actually works! Unfortunately, I over tightened the PET bottle and sheared the…
Liked the reinforced joints that vexanix added, just wanted the other head(s) from the sharks Category: Toys & Games
English: This set includes the emblems of all the clubs in the 2023/24 season of the German Football League (Bundesliga). The individual color layers are designed so that all the emblems can be easily scaled in the slicer. At 100%…
I re-modeled this with the exact dimensions from charlescho's design, except I reduced the height by 10mm.
My take on the 5015 fan blower mount that uses a small angle and better clearance vs dual/tri horn designs out there. This is also not a remix; I designed new horns from scratch and also the mounting system. Included with this build are…
Reindeer christmas cookie cutter
This model is compatible with the lego system.
¡La soberana absoluta del abismo – Succubus Reina Infernal! Diseño 100% original: succubus poderosa con piel roja escarlata, grandes cuernos curvados negros, alas de murciélago extendidas, cola espinosa y cabello largo negro ondulado.…
This model is compatible with the lego system.
UPDATE 2025-11-25 v14: BETA TEST Major math calculation changes to ensure magnets never cut into text. Test with care, report bugs please. I have left v12 available for now. Introduction This is a magnetic label generator that I use to…
According to my girlfriend, this is the cutest model I've made so far. This is my Reindeer Christmas Holiday Ornaments ! Check out my page for them as just decorations, if you don't need any more ornaments! I printed one myself, and the…
I wanted some Christmas-themed studs for @MagnumDanger's giant LEGO holiday wreath, and thought this reindeer was cute. Left and right facing versions included. No supports needed. Thank you @ClarasLittleArtworks for the original reindeer…
This is a parametric model made in Fusion 360 to suit your pipy needs. Simply go to “Modify→Change Parameters” and choose the values that you want to suit your pipe's diameter. Beware, the stl provided is for 32mm diameter pipes. Thanks…
Größe kann mit Fusion 360 angepasst werden (Ändern => Parameter) und der Voronoi Effect unter https://www.voronator.com/ erzeugt werden.
A reinforcement bracket designed to stabilize all sorts of IKEA LACK enclosures. Use 4x20 mm wood screws for mounting. The upper leg screw holes need to be pre-drilled with the whole screw length, but you can also leave those empty as I…
Printable without support. PETG recommendet, everything else possible. Screw holes for 4x40 Woodscrews. Credit to Littleorangeprintthingy for the original design I oriented this on. Althogh I constructed everything form Scratch.
🎨Try KOGI LAB for free at kogilab.com ! 🦌 Christmas Reindeer – Multicolor Flexy Miniature🎄 Hey everyone! 🎅✨ The holiday spirit just got an upgrade - say hello to the Christmas Reindeer! 🦌🎄 This adorable flexy reindeer is ready to trot…
A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This is the beefier version of the regular 19-inch modular keystone patch panel , for those who need the extra strength. I…
Das Tool ist zum ersten groben reinigen der Grill Kontakt Platten des Optigrill und Optigrill Elite im kalten Zustand nach dem grillen, um die angebrannten Reste problemlos zu entfernen. Mit Küchentüchern sind die Gnupsis damit das…
I really liked this design, but after printing it, I had to use a jewelers file on all the notches for them to fit & they were still quite tight. I created a sketch in fusion 360 with the base profile of this. Changed the notches from…
You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…
Santa Sleigh & Reindeer Christmas Decoration
This is a reverse engineered Prusa MMU2 idler with a few changes. As I've cracked 2 of the original ones and had some issues with idler bearings being a little too loose, I've drawn this in Fusion basing on original. Fit and size are the…
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- 6ts manual operated crane, as it was used on larger…
Passend zu meinen Felgen (es werden noch welche kommen) der erste Reifensatz, natürlich gedruckt und in einem eher ungewöhnlichen Aufbau. Die Reifen taugen für die Straße und für leichtes Gelände. Der Druck kommt somit mit nur einer…
The reindeer card kit is a remix for multicolor printing. The ears, eye, nose, hoofs, and bum are all separate so you can print easily changes like removing the eye and setting all the colors. Clippers can be helpful to remove from the…
This 3D model is a reindeer designed with a Voronoi pattern, which gives it a modern, cellular look. It's perfect for festive decoration or as a year-round piece of art. Detailed Description and Usage The Voronoi Reindeer model is a…
Compatible with a 13mm wide ruler. Block is best printed laying on the reference surface. Bolt standing on its head. 0.4mm nozzle, 0.2mm layer Info: Old model I used to upload to Thingiverse in 2019.
CHRISTMAS REINDEER COOKIE CUTTER
Remix to increase the stiffness of the handle. Added a chamfered rib to the back of the handle so it flexes less during use. I also made moderate changes to how the joints are built to increase their stability during printing. I recommend…
![Best Spoon Rest Ever - Reinforced [remix]](https://media.printables.com/media/prints/a3e31f33-ec0e-4d2e-992c-517e7d5a8a9e/images/12127586_9e05b6a9-0dae-4f2d-8207-1ffd6c22a79d_73eeeebd-3e64-4a36-ab87-c28d882c365f/20260222_132201-photoroom.png)
