Counting matching models…
This little snap-together reindeer is a perfect give away or present for christmas. It's very easy to print and looks quite good. I downloaded this model from Thingiverse. Design by shink. https://www.thingiverse.com/thing:3213535 Print…
This small, charming reindeer figure is a lovely decoration for your windowsill or a festive Christmas table. It is quick and easy to print, and its minimalist design gives it an elegant, high-quality appearance. It also looks great when…
🦌 Minimalist Low Poly Reindeer Sculpture For all fans of my minimalist sculptures… today I’m releasing another Low Poly model ! This reindeer fits beautifully into the Christmas season, but also works perfectly as a timeless decorative…
IMPORTANT - VERSION INFORMATION This listing represent V1, the main and current version of the system. An earlier ''Early Release'' version is still included as a legacy option for users who only want a press-fit, tool-free assembly.…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
It's a pastry cutter. It's very simple. Height is 5.8 cm, width 6.0 cm and thickness 1 cm. I designed the cutter with a stamp that is suitable for fondant or butter pastry. Each can be printed separately or together to save space on the…
CUTE KNITTED REINDEER - Print-in-place - Minimal supports required Join my Patreon to get full access!
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
A simple but cute Christmas reindeer. Put a Ferrero Rocher into it and give it away as a cute present! Features Cute design Easy to print Two versions: Default and fuzzy skin Last minute gift Recommended print settings (or just use the…
Here is a reinforced replacement for broken kitchen hinge. You don't need to use any supports to print it. I printed it with these parameters: - 0,2 mm layers height - 6 walls - 30 % infill Please give it a 💖 if you like it 🥰
MODEL DETAILS This is a festive model that doubles as a stress test for your 3D Printer. If you liked this model, why not try our other stress tests too? RECOMMENDED PRINT SETTINGS A 0.6 Nozzle or smaller is recommended when at 100%…
The original Articulated Shark was a little to wibbly wobbly in the up down articulation for my little nephew to play with. I added some additional parts to stiffen the shark out quite a bit. It is still just as wibbly wobbly going side…
Introducing a sleek and robust truss structure style table reinforcement for Ikea's iconic Lack table. Increases stability and reduce shaking. Technical Details: Material Recommendation: PET-G or PLA. Installation Requirements: 64 screws…
I had made a few of these(original non-reinforced version) for my son and his friends, and was annoyed with the tail popping out. Looked for a remix that was fixed, and found this stable version. Reading through the comments I saw that…
This is my version of a reindeer head. It seems like there is a nearly similar version, but this is made by a special computerprogramm so not copied. It was made with a free vector picture. Enjoy printing. View my other models too.
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
The existing reinforcements aren't bad but ensure only that the Legs can't turn, with no support for actual stability or reduced shaking. My created reinforcements increase the overall stability and reduce shaking/wobbling, especially for…
This updated version of my original 'Wallhook' makes it even stronger than before, and featuring rounded edges that provide a cleaner look while reducing stress concentration points in the plastic. I have integrated two dedicated screw…
A remix of a great spoon rest! Due to the orientation of the print (flat), the rest 'nibs' are a weakness. One of them broke for me on the original during a wash. Remix Changes Thicker rest wall (+1mm) Support ribs Links & Reference…
You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…
This remix improves on a few areas that made printing the original design very difficult. feet have been made flat on the bottom and even, so deer stands in a more stable manner custom supports have been made more substantial to provide…
Printing I printed the bins with both 0.4 mm and 0.6 mm nozzles, both work fine. There are all variations of the bins from 1x1x1 to 7x7x10, in regular- and half-grid variations (although most are obviously untested). Recommended settings…
Please click ❤LIKE❤ if you appreciate my work 😊 Strong and reliable reinforced corner brackets for everyday DIY projects. Includes two versions: a compact 2-screw bracket and a 4-screw heavy-duty version for increased strength and…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
No support needed. Use 4x20 mm wood screws without predrilling.
Check out more models from Phone collection https://www.printables.com/@C47_3d/collections/793008 and Xmas collection https://www.printables.com/@C47_3d/collections/155488 --- If you want to sell prints of this models you can buy a…
Fellow Creality K1 Owners, Yup, that's right! Yet another take on mounting both the spool holder on the side of the Creality K1. With the original, I noticed that the spool was sagging. So with this model it has 4 points of attachment to…
I printed this model with a white PLA, 0.4 nozzle, 0.2 line width and organic supports on. I added a cylinder for each leg to improve the first layer adesion and help the model to stand. My first print was downscaled to a 10cm model, and…
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) MINI REINDEER Say hello to…
Rudolph 🦌, the red-nosed reindeer, shines bright as the hero of Christmas Eve! With his glowing nose and cheerful spirit, he leads Santa's sleigh and spreads holiday magic everywhere. 🎄✨
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish The best quality is achieved if printed face down Print: 0.2mm…
A strong and practical 3D printable wall hook designed for secure mounting and heavy-duty everyday use. The reinforced triangular structure provides excellent strength, stability, and durability while keeping the design compact. Perfect…
Reinforced version of side spool holder with option to attach side bin
Reindeer are a staple of the holiday season. These models are unique and work well in any scenario. You can hang them on a tree, or just place them on a table. The base model used for this design is a composite of multiple others I had…
Reindeer headband. The size was based on a child's headband I used as reference. Scale as needed. The 3mf file includes two headbands, both 90% XY scale. These two fit on a Prusa MK3S bed, barely. They take around 1 hour each when printed…
A reinforced bookend (for taller or heavier books) with a honeycomb pattern on the visible face. No supports required, no post-processing. Just a clean and simple print. The visible face is about 120mm wide by 140mm tall. The base is…
I was tired of wasting filament and time for printing several different models of this case which had very weak hinges and broke instantly, so I fired up Sharpr3D and fixed the hinge issue myself. There is also a clip to close the case…
Reinforcement - stiffening for IKEA LACK table. Stiffens the table and reduces vibrations . No supports needed. PET-G recommended. For one table you need 4 pieces . Material Recommendation: PET-G. Installation Requirements: 32 screws…
Description This is a remixed and upgraded version of the original Gravity Broom Holder, made for smart and secure storage of tools, broomsticks, or garden gear with round handles. The system allows you to organize various handle sizes –…
Full credit to dkarjadi for his original design which can be found here . What is it? This model is an upgraded chamber light to "assist" the wimpy one that comes with the Bambu X1/X1 Carbon and the P1S. Printed in grey ASA, gaskets in…
🧩 NASA-Style Hexagonal Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a NASA-style hexagonal flexible mesh , designed from scratch in…
NOTE: This is an add-on to the pre-existing "QUICK-CLIP : Base Starter Kit" Post-Processing Difficulty: Easy (Ready to Use from Printer) Tools Needed: None Introduction & Instructions: QUICK-CLIP is a versatile mounting system that I…
A 19-inch Reinforced Modular Rack Mount Blanks. This is the beefier version of the regular 19-inch modular blanks , for those who need the extra strength. I have added a .3MF project file as well. This mount is part of a 19-inch modular…
⚙ Print Settings & Advice: * Orientation: Position the model flat on the bed to ensure the screw holes and reinforcing rib print perfectly without any support material. * Perimeters (Walls): Min. 4 perimeters for extra rigidity. *…
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
The original coffee scoop that I used for some two years broke at the connection between the handle and the measure cup, so I did a redesign using Fusion 360, preserving the original dimensions.
Reindeer napkin holder for Christmas. Or why not every other time as well.
The IKEA Lack table is used by many makers to build a 3D printer enclosure. But the table is lacking stability, the legs are not connected to the table tightly enough. By the time the connecting screw gets even looser in the soft (pressed…
This model is compatible with the lego system.
This remix thickens the loop to reduce the change of breakage via wear and tear.
A remix of Hajo's most excellent bird water feeder. Like Hajo's original post, all the other bird drink machines that I found drained in seconds, but this one actually works! Unfortunately, I over tightened the PET bottle and sheared the…
Liked the reinforced joints that vexanix added, just wanted the other head(s) from the sharks Category: Toys & Games
English: This set includes the emblems of all the clubs in the 2023/24 season of the German Football League (Bundesliga). The individual color layers are designed so that all the emblems can be easily scaled in the slicer. At 100%…
My take on the 5015 fan blower mount that uses a small angle and better clearance vs dual/tri horn designs out there. This is also not a remix; I designed new horns from scratch and also the mounting system. Included with this build are…
Reindeer christmas cookie cutter
This model is compatible with the lego system.
¡La soberana absoluta del abismo – Succubus Reina Infernal! Diseño 100% original: succubus poderosa con piel roja escarlata, grandes cuernos curvados negros, alas de murciélago extendidas, cola espinosa y cabello largo negro ondulado.…
This model is compatible with the lego system.
According to my girlfriend, this is the cutest model I've made so far. This is my Reindeer Christmas Holiday Ornaments ! Check out my page for them as just decorations, if you don't need any more ornaments! I printed one myself, and the…
I wanted some Christmas-themed studs for @MagnumDanger's giant LEGO holiday wreath, and thought this reindeer was cute. Left and right facing versions included. No supports needed. Thank you @ClarasLittleArtworks for the original reindeer…
This is a parametric model made in Fusion 360 to suit your pipy needs. Simply go to “Modify→Change Parameters” and choose the values that you want to suit your pipe's diameter. Beware, the stl provided is for 32mm diameter pipes. Thanks…
A reinforcement bracket designed to stabilize all sorts of IKEA LACK enclosures. Use 4x20 mm wood screws for mounting. The upper leg screw holes need to be pre-drilled with the whole screw length, but you can also leave those empty as I…
Printable without support. PETG recommendet, everything else possible. Screw holes for 4x40 Woodscrews. Credit to Littleorangeprintthingy for the original design I oriented this on. Althogh I constructed everything form Scratch.
🎨Try KOGI LAB for free at kogilab.com ! 🦌 Christmas Reindeer – Multicolor Flexy Miniature🎄 Hey everyone! 🎅✨ The holiday spirit just got an upgrade - say hello to the Christmas Reindeer! 🦌🎄 This adorable flexy reindeer is ready to trot…
A modular, two-part 16 ports keystone patch-panel made to fit in 19-inch racks. Each module has 8 keystone jacks. This is the beefier version of the regular 19-inch modular keystone patch panel , for those who need the extra strength. I…
Das Tool ist zum ersten groben reinigen der Grill Kontakt Platten des Optigrill und Optigrill Elite im kalten Zustand nach dem grillen, um die angebrannten Reste problemlos zu entfernen. Mit Küchentüchern sind die Gnupsis damit das…
I really liked this design, but after printing it, I had to use a jewelers file on all the notches for them to fit & they were still quite tight. I created a sketch in fusion 360 with the base profile of this. Changed the notches from…
You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…
Santa Sleigh & Reindeer Christmas Decoration
This is a reverse engineered Prusa MMU2 idler with a few changes. As I've cracked 2 of the original ones and had some issues with idler bearings being a little too loose, I've drawn this in Fusion basing on original. Fit and size are the…
The reindeer card kit is a remix for multicolor printing. The ears, eye, nose, hoofs, and bum are all separate so you can print easily changes like removing the eye and setting all the colors. Clippers can be helpful to remove from the…
This 3D model is a reindeer designed with a Voronoi pattern, which gives it a modern, cellular look. It's perfect for festive decoration or as a year-round piece of art. Detailed Description and Usage The Voronoi Reindeer model is a…
CHRISTMAS REINDEER COOKIE CUTTER
Remix to increase the stiffness of the handle. Added a chamfered rib to the back of the handle so it flexes less during use. I also made moderate changes to how the joints are built to increase their stability during printing. I recommend…
This is a remix of the Bag Clip by Andrei. I love the design and in the spirit of over-engineering a bag clip, I added a hole for an M3 bolt and nut in place of the original's printed dowel. It uses a standard 15mm long M3 bolt and M3 nut…
https://www.buymeacoffee.com/maxt ---------------------- 4mm thick to ensure stability The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as…
EDIT 18.11.24 Multi-Angle Baseplate Stabilizer: Some of you have asked for a variable one way solution for different angles. Santa came earlier this year. Here you go my fellow racers ;) Print Setup: 6 Walls + 4 Top & Bottom Layers 5-15%…
You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…
Christmas Door Trim Corner -Reindeer🦌 ⛄Ciao sono il pupazzo che vedi nella foto, sarei molto contento se metti un like e scarichi il mio progetto per un grandissimo supporto👍 ⛄Hi I’m the puppet you see in the picture, I would be very…
A minimalist yet cute reindeer ornament, which is inspired by the class Band Saw Reindeer by Nick Engler. Because I didn't have a band saw, I designed a 3D printable version similar to the original, but with some slight adjustments for…
Christmas Reindeer in flexible form! Became inspired to make one after having found flexible christmas tree on reddit posted couple days prior (you can actually see them in the background on my picture) -…
Christmas Cookie Biscuit Gingerbread Cutter (approx 85 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
You can use this as wall art or Christmas tree decoration. You can print it with a layer height of 0.2 or 0.3 (the model is 1 mm thick) print with enough bottom or top layers so that there is no infill required. It fits on a bed size of…
Уголок мебельный с усилением 25 мм.
🦌 Low-Poly Reindeer Minimalist, geometric reindeer for 3D printing ✨. Sturdy, decorative, and perfect for festive projects 🎄. Have fun printing! 😄✨
this is a 19" 1u patch panel for your rack , you can bolt it together whit some nuts and bolts (m4). brim recomended supports not necesery print whith the front on the bed you can also print something else from the collection and it will…
FIND ALL MY DESIGNS HERE : https://cults3d.com/en/users/Zuff/creations Do you like my work? Can you support me with a ☕ or maybe a 🍺? It all depends on the time 😄 --- Reinforced part to fix the "Nema 17" motors of the Z axis on Creality…
English: This set includes the emblems of all the clubs in the 2023/24 season of the 2nd German Football League (Bundesliga 2). The individual color layers are designed so that all the emblems can be easily scaled in the slicer. At 100%…
More durable design, changed the phone holder to another one.
Simply put, I've been using the non-mmu lack enclosure. I found the structure lacking especially in rigidity. Ironically the bottom table was fine, it was the top one that wobbled around. There also didn't seem to be a lot of angle…
Tarmo5 is a great project by Engineering Nonsense. Now, my build is robust and powerful and also resistant to my son's driving skill. → if you are looking for my cover and wing, the page moved here :…
I really like dinosaurs, and one of my favorite models to 3D print is https://www.printables.com/it/model/46241-flexi-rex-with-stronger-links . I decided to remix this file by adding Santa's sleigh to it. An unusual reindeer XDXD Mi…
Bumble Snow Monster: Rudolph the Red Nose Reindeer. The one thing about Bumbles → Bumbles Bounce. Tree topper Version Included. His teeth are bad. He really does need a dentist. Suppose I should do a Hermey
Supports and Raft required, If using "Auto-Support" please make sure to remove any supports from "within" the articulated links to make movement of joints smoother and easier and to prevent any fusion.
replacement for volkswagen golf 6 cupholder insert + R-logo
We shall prove ourselves in glorious combat! This is a great statuette to have along side you in combat. Bring the hammer down on your enemies and justice will prevail! Printed in Copperfill Print Settings Printer: FolgerTech i3 Rafts:…
Versteifungsplatte für Tamiya TT02 Top Deck for Tamiya TT02
Normal Edge Polymer Clay Cutter - with a 0.7mm cut wall, 3mm solid base, and a height of 12mm. For a wider selection of sizes and precision-cut polymer clay cutters, explore our collection by clicking the link below.…
![Best Spoon Rest Ever - Reinforced [remix]](https://media.printables.com/media/prints/a3e31f33-ec0e-4d2e-992c-517e7d5a8a9e/images/12127586_9e05b6a9-0dae-4f2d-8207-1ffd6c22a79d_73eeeebd-3e64-4a36-ab87-c28d882c365f/20260222_132201-photoroom.png)
