436 models
Smash! If you like my models, please like, share, download, make and all the amazing good stuff! Most Dice Towers are awesome additions to your board game experience. But it doesn't make rolling the dice any easier. If anything, it makes…
*** UPDATE (Nov. 2023) *** Some people experienced issues with the tight tolerances around the hinges, so a version with slightly increased tolerances is now available. If your printer is well tuned, I still recommend the standard version…
I've been playing too much Call of Duty lately and decided to make a print in place “quick-reload” paper towel holder. Largest paper towel I've tested is Costco's 6" diameter paper towels. Installation notes: When determining the spacing…
Break-action sanding block Open. Load sandpaper. Close. SAND IT! Your sanding block experience has never been easier. USE: Before first use, to open the hinge: Hold the sandpaper half by both sides in the middle Holding this half in the…
Tactical reload paper towel holder for IKEA Skadis peg board. Houses rolls up to 24 cm in length and 16 cm in diameter. I remodelled the original lever and added a curve to the roll contact face. Still fully interchangeable with the…
Power Cannon for GraviTrax by uhltimate This is my Gravitrax compatible "Power Cannon". It is easy to reload and has more power to gain height. You can print it without using supports. There a two different designs. Power-Cannon, same…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Separating trays for reloading brass, pulls out 45, 40, 9mm, and I added the separate 380 version. You want to stack them as they are labeled as follows, from the top down: - 45, 40, 380, 9mm, and base. The trays stack, just pour in the…
A remix of Denste17 's bike mount, which is also a remix of Florian Z's (Weberflo) Multihalter für Thule Chariot . My remix is based on another remix by Philipp Unstoppable (allXages) who added a PLA Version . Denste17's Mount…
This is a remix of a model I got from Thingiverse a long time ago. I can't find the original model anymore, but this has been completely redrawn in Fusion360. The Fusion file is parametric. I've tested it a few different ways and changing…
Summary Brass Prep Station For the gear box plates, recommend a 20% infill and 3-4 perimeters or walls. For the gears (main helical gear and small helical gears), 4 perimeters and 70% infill plus 5 top and bottom layers. For the housing…
Small but handy powder funnel for Luger 9mm and .223 Remmington / 5,56 NATO. Fits resized cases perfectly. Designed to be usable in reloader big hands... ;) Print instructions Category: Tools Print Settings Printer Brand: Prusa Printer:…
If you are, just like me, tired of going through the box of shell holders, looking for the needed number, this is the solution for you! Everything you need in one place, with numbers large enough that you can read them without glasses :-)…
* Measurement scale was few mm off, fixed now (pad_fixed.stl) * I reworked my previous model - improved slider, easier to read scale, better tolerances. Foot measurements are possible now in both centimeters and inches. Print settings:…
I'm putting together some small batches of loads for testing, so I decided to come up with a few tools to help. I didn't need large 50 or 100 round trays (nor did I want to buy/wait for them), so I decided to draw up my own custom ones.…
I liked the model by Chris, but I wanted it parametric so I could make one for some huge Go Fish cards my kids have. Getting from the STEP file provided by Chris (which is much better than STL, thanks Chris!) to a parametric model was not…
Better than Shimanos official tool. 8mm hex wrench compatible for max torque (<1nm!!! for tightening)
This powder pan was designed to work with an AMIR/Brifit digital scale from Amazon. (Linked below) However, there are many other brands of scales that look identical or use the same platten. The bottom measures 33mm in diameter and is…
These have been working surprisingly well, and will be updated as better designs are tested. Please use all safety steps you would normally take when handling any firework. Test video of a 16mm and 20mm Works well with standard PLA. The…
Update: after actually installing this paper towel holder, I realized it needed another improvement, slotted holes for adjustable mounting, so here you go! I like the model by AL_3D but I had a bad time printing it and parts getting fused…
This remix is meant to make the excellent design of PattysLab a bit less intrusive visually . It is meant to be fixed on the wall with double sided tape. Just copy and flip all the parts in your slicer to get a left and a right half.
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
This is a simplified version of mckgyver's preload adjuster tool for Shimano Hollowtech II cranks. While mckgyver did most of the work, I've made a few adjustments to make the model easier and quicker to print by removing the concave…
Updated in 2025. I received a request for a modified version of the powder cup. 20mm tall, dual spouts and no notch. There is a revised version of this cup because after I got around to printing it, I found the overhangs didn't print…
This is a preload spacer for the Logitech G920, G29, G27, & G25 pedals. May work for others too? Let me know if so and I'll update the descriptions. I included the dimensions so you can figure it out yourself or remake it however you…
As long as your printer is capable of 1" bridging, you should be able to print this without supports.
not perfect but they hold the shells for hand reloading. i put supports on for the eased edges. takes about 2 hrs to print.
A slide-on slim bucket to catch and store your printer's filament purge poops. Simply unscrew the 2 m3 screws already there by a couple millimeters and slide the funnel on, then tighten the screws and slide the bucket on. No hassle and no…
I have an old Herter's reloading tray that I prefer over many of the current commercial product designs . This design is an homage to that Herter's tray which held 60 cases, this design holds 50. Opening is 0.55", in the picture you can…
Lee Breechlock reloading die stands. 3 hole, mainly for rifle calibers, includes space for shellholder. May also work with Hornady Lock-N-Load. Printed in PLA on Bambulab X1C
This mount allows you to mount an Akro Mills Bin to the front bar of the Hornady LNL AP press. Stock Hornady bins are the 30210 models. Bin Mount Sizes Single Double (about 75% support of each bin) Double Longer (100% support of each bin)…
This is an 8mm tall spring preload spacer, designed for any traxxas vehicle with shocks that use preload spacers on the springs. These snap over the shock cylinder, to increase the preload. Very simple to scale to various thicknesses.…
9mm Reloading tray. Holds Qty 50 brass per tray. Print however you desire.
This is a upgrade for the case slider on the Lee 6000 (Six Pack) Progressive Reloading Press. It improved the reliability of grabbing a case and inserting it into the shell holder and prevents/greatly reduces kinking the case feed spring.…
A much improved easy-reload retaining arm for the 6-shot disc shooter.
SRAM Bottom Bracket Preload Adjuster - MPN: 11.6418.001.001 Modeled replacement for myself after breaking the original (ordering aluminium one from ali probably would have been more time efficient). Printed out of PETG 40% infill months…
Simple stand for holding 9mm Luger rounds during manual reload. Easily modifiable. Print instructions Easy to print, PLA material is suitable as well. In such case, generate new gcode.
From when i sold 3d prints on request.
I know, another reloading tray? Well after being disappointed with other options for various reasons, I decided to create my own. Others were either too big, non-stacking, or didn't have enough caliber options. These are stackable and…
To prevent spent primers jumping all over the place, you can insert these fillers into the slot of the ram of your RCBS press. Both have the same function, the T-shaped one comes out with the shell holder, the other one can stay in the…
This is a .308 version of my previous 6.5-.284 tray. It should print with no supports, but if your printer has trouble with bridging you can use supports for the handles.
Reloading Trays / Blocks which are efficient! There are some great reloading trays out there. I don't think my design is particularly better in most ways, but they're pretty good at using only a little bit of filament in comparison. These…
After trying out lostprimers diy reloading press, i tweaked it to make it fit metric hardware and to improve sturdiness. i think i have achieved this by adding a M12 rod which clamps the parts in their postion to prevent unwanted…
Case neck and bullet concentricity gauge for reloading (supports for 308 and 223). Kind of based on one of the $300+ aluminum ones I've seen. Uses pretty much any dial micrometer, I used a $25 Wen off Amazon, seems to do well. Hardware is…
I've added a slight 1500 mm radius to create some preload. The snap-latch is now also preloaded more. Also the print in place hinge was tweaked. It is now hopefully easier to print - but I must admit I do not recall problems with previous…
I can't think of a more American way of killing flies than shooting them with a gun. I created this object to help reload salt rounds for either the Bug-A-Salt Shred-Er, or Crosman Vigilante. Simply snap it onto the back of the pellet…
Simple stand for holding .308Win rounds during manual reload. Easily modifiable. Print instructions Infill 15% for 20 rounds, 5% for 50 rounds model.
A wall mount to hold reloading dies with the shell holder. Available for screw in or Multiboard. The screw-in style uses M4 screws. The Multiboard style uses Dual Snap Connector - Part B. It will hold the die weight on the Mutlboard as is…
Remix of @ken226 's reloading trays. I added letters and numbers for use in load development. These are perfect to keep track of changing loads while looking for the perfect load for your individual 45-70 government.
Redesign of the die box that comes with all Lee loading dies so that you can leave the Hornady LNL bushings on the dies in storage (original Lee box was too small and lid would not snap shut). Should be good for all caliber dies as their…
Shellholder holder for reloading. Holds 5, 7, or 9 shellholders and screws to a wall or bench. I have included the Blender file. Category: Tool Holders & Boxes
Version 2 of the “ Thule Stroller Flag Holder reloaded” ! An additional slot has been added dedicated to the extension rod provided by Thule. It is very much recommended to use the extension rod in order for the stroller to be more…
Compact and Stackable reloading plates all same size for all of them. Making then fit needly when they are not in use.
Shotgun shotshell reloading trays for 16 gauge, 20 gauge, 28 gauge, and 410 bore. I couldn't find any small bore reloading trays out there so I made some for my reloading hobby. These are useful for reloading to keep the hulls stable and…
people keep saying its hard to reload so i added a handle, may need sizing to your finger.
300 Blackout Reloading Block / Tray. Use supports for the end handles. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Prusament PLA Grey Notes: Any material does the…
The is a prototype of a wrench used to tighten/loosen the nut on reloading dies. Fits a 1-1/8" nut. This was designed for Lee reloading presses which have a very tight area to fit the wrench. Now that the prototype works/fits I will…
A simple set of preload spacers that will fit the stock Shocks on your SCX24 and AX24 rock crawlers. These can be used to adjust the amount preload on your shocks, therefore adjusting ride height of your crawler itself. When used in the…
This is a round counter for Dillon 650/750 Reloading press, it could be used to count other metallic items I suppose. Remixed from a round counter for Dillon 1050 reloading press found on the internet a couple of years ago. The counter…
Remixed the original "giant powder funnel" to accomodate MEC loaders where one bottle is shorter than the other (like the stock photo uploaded). Chopped off one side with a flat surface. (Sorry for the poor quality photo of it in-use. My…
Created by Designmond @des_3526156137
Reloading tray for .357 Magnum and .38 Special. Fits also for smaller caliber.
I modified Lorenzo Gonzalez's lovely Reloading Die Organizer to work better with my pegboard, plus a couple other minor improvements: Changed the hole spacing to 8", to match US/Canada standard peg board (Lorenzo has a version like this…
Check out this video for an audiovisual presentation! Welcome all foam flinging fans! The Fast Reload magazine turns your Worker Hurricane into a rear-loaded six-shot revolver. It allows for single-handed reloading and lets you easily…
EDIT 07/20/2025: Added a Chamfer to the holes in the block (Because chamfers are what separate us from the animals) Reloading Block for .223 Rem./5.56x45 NATO rounds. The Block holds 50 shell casings at 0.5" (12.7mm) deep. The holes are…
This is a helpful accessoire when you want to deprime only on your Lee Precision Turret Press. After inserting this piece into the slot, the used primer will be redirected to the back hole. The piece clicks onto the rod and fits snugly…
box patterned after the RCBS, shortened to better fit most standard die sets.
Reloading tray for .308 Winchester. Fits also for smaller caliber.
Unmarked reloading tray, .308 (.473") Casehhead diameter. .49" actual. This is a mod of my .308, .243, 6.5 Creed tray. This version is unmarked, so you can modify for your own use. The MasterChief edition was made for, and at the request…
This is a bullet/brass tray to fit the Hornady Classic reloading press. Print with 4 walls, 2 bottom layers, 3 top layers, 20-25% gyroid infill. With a 0.6mm nozzle you can do 3 walls. Supports are needed touching buildplate only to print…
Update 11/21/2024 308 win has been added to the group. My initial prints have been made out of PLA but PETG also works. Because of the thin sections that label the funnels, I would recommend waiting for the print to cool down before…
100ct Reloading tray for 6.5 Creedmoor or 308.
9mm reloading tray for holding up to 25 cartridges Dimentions: X = 64.16mm Y = 64.16mm Z = 11.00mm Category: Sport & Outdoors
For details please see the original model @ https://www.printables.com/model/Parametric-Cable-Grommet Added a top disk stopper as I needed to use this in vertical orientation. Just use any contact adhesive (glue) to secure it to the top…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
It is a knob for th epowder throw adjustment. My version has a hole for a M3 screw to lock onto the stock nut. The HEX is 10.9mm A/F to suit my Dillon press.
Dimentions X = 129.71mm (5.1 in) Y = 64.85mm (2.6 in) Z = 27.13mm (1.0 in)
.243 Winchester version of my other rifle caliber reloading trays.
Simple stand for holding .45 ACP rounds during manual reload. Easily modifiable. Print instructions Default settings will do fine.
Requested by someone, you can make all these changes and your own remix by using the original files and changing up the specifications (per instructions) in FREE* onshape account.
I got profoundly sick and tired of the awful O-ring style LEE locknuts that keep migrating. I couldn't be bothered to cough up the money for a bunch of locking ones, so I decided that I might as well learn to use the 3D printer that I…
EDIT 07/20/2025: Added a Chamfer to the holes in the block (Because chamfers are what separate us from the animals) EDIT 07/18/2025: Modified the STL to add embossing on the side and changed debossed text on the top to include NATO…
Works with PLA or ABS. Use supports at your own discretion. I printed several of these with no supports whatsoever. Redesigned using metric measurements as most 3d print software is metric. Category: 3D Printing
UPDATE: I made an error in the scaling calculation, re-uploaded better scaled versions. two more variants of the enhanced version of my movie accurate DC15A rifle with added details that are logically supposed to be there. This time one…
Small pistol primer press that utilizes Lee shell holders and about $1.50 of hardware. Please utilize the readme for print settings, disclaimer, assembly, and additional info for the plunger. Use PLA pro.
I have a RCBS Rockchucker primarily dedicated for depriming cases. Rather than dropping (and missing) the cases into a box at my feet, this funnel will route the cases to a box. Uses ½" OD plastic tubing with a 5/8" ID. Should handle most…
Die set holders for various models, including 223, 30-30, 30-06, 308, 300 Win Mag, 6.5 Creedmoor, 243, 350 Legend. Holds everything secure. You can turn it upside down and nothing fallls out. Checkout my RCBS Bullet Puller holder as well.…
A tool used to remove the preloader from the shock tube of a bicycle fork. I decided to do some maintenance on my shocks and didn't have the tool I needed for it. This was one of those situations where my alternatives were buying a $10…
What problem does this solve you asked? Stepper motor shafts/bearings aren't designed to take axial load, but only radial load, so taking the whole weight of the gantry isn't their forte, they will wear down the bearings faster, create…
I remixed the funnel with a bigger hole with about 7mm in diameter. Since I am also reloading more coarse powders like VV N570 that need a whole funnel hole.
Reloading tray for 9mm ammunition created for my friend who's reloading ammunition a lot. He asked me to create this one based on his requirements - with precise holed tolerances and height of every step just enough. This is the last…
When I reload 45-70 I don't usually load more that 20 at a time, so I made this tray versus the commercial trays that hold 50 cases.
Mosewald14 did a great fixing the original model and all I did was extend it to fit the XL size (140mm/5.5 inch ) paper towels from Costco 3 walls or better Turn on and use variable layer height, if you don't want the huge layer stepping…
Crosman 1077 Reloading station Fits two magazines “Clips” Storage for 1077 Clips Tool https://www.printables.com/model/527527-crosman-1077-clips-tool Dimensions: X 66mm Y 55mm Z 10mm My print settings: Layer Height: 0,2 Perimeters: 3…
Simple device to reload 35mm films. For example you need to test new camera/lens/film and don't want to shoot all 36 exposures. You can make 3 rolls of 11 exposures each, out of 36mm cassete. It's especially usable if your film is not…
added a reload grip to the original design
As I liked the idea of having labels built into the holders for the pegboard as I am setting it up, as there is only a couple of designs for holding Dies on a pegboard but nothing with labels. This is set up for standard 1" center…
Co-Ax Reloading Press fits Forster and Bonanza presses storage for the tools needed to work on machine also holds a small oil bottle, no supports needed can print at any print height u like, there are also place to put magnets when done…
This was made so I could reuse cheap shotgun shells to make 12 gauge shotgun snap caps. I found some 3D models but nothing that fit. It was designed using Federal Top Gun 2 ¾" shells I printed in ABS and PETG, both with 35% fill and 4…
