P
PrintablesLukyn3D
Crate Revell
Podpory jsem měl jen na spodním osazení. PLA
- Downloads
- 670
- Likes
- 139
- Rating
- 4.83
Search results: revel
Counting matching models…
P
PrintablesNunuz57
Ikea Skadis Revell glue holder
Skadis holder for Revell Contacta glue : https://amz.run/5fef 3D PRINTING SETTINGS Can be print on 0.2mm layers Requires supports
- Downloads
- 421
- Likes
- 54
- Rating
- 4.94
P
Printablespdx930
Stacking silverware tray for top drawer in 2018-2020 Winnebago Revel
Stacking silverware tray for top drawer in 2018-2020 Winnebago Revel. Got tired of having a mess of silverware, matches, rubber stoppers, paperclips, etc. floating around in the top drawer, so made up this quick two level drawer tray.
- Downloads
- 299
- Likes
- 24
- Rating
- 5
P
Printableswalid khier
1/24 Jaguar E-Type rim for Revell 07668 and 07687
Apart from the wrong roof, headlight frame and sub-optimal kit engineering, the Revell E-type is a very good kit. I felt that such a beautiful kit deserves better rims than the,… well, kit rims. It is a real see through wire wheel that…
- Downloads
- 256
- Likes
- 22
- Rating
- 0
P
PrintablesTeo_211
Revell Dassault Aviation Rafale C Wall Art
Revell Dassault Aviation Rafale C Wall Art Silhouette model. Adjustable size. I accept model suggestions
- Downloads
- 240
- Likes
- 42
- Rating
- 5
P
PrintablesROLS733
HSW | Revell Holder | Honeycomb storage wall
As the Title says, a Revell Contacta Professional Glue holder for the HSW. Just look for my other useful stuff for the Honeycomb Storage Wall.
- Downloads
- 231
- Likes
- 38
- Rating
- 5
P
Printableswormoworm
Gridfinity Revell Contacta holder
Highlights Holder for a bottle of Revell Contacta plastic cement (article no. 39604). Holes and slots for various accessories, such as a pin to clear the nozzle and sticks / strips used when applying / speading glue. Occupies a 3x1…
- Downloads
- 178
- Likes
- 27
- Rating
- 5
P
Printablesmurdrrdbypirates
Revell Aqua Color bottle/pot organizer for 4, 6, 8, 10, 12 or 16 square pots
Revell Aqua Color bottle/pot organizer for 4, 6, 8, 10, 12 or 16 square pots I needed a holder for a couple of pots of Revell Aqua Color that were flying around in my tool box. Printed in PLA @ 0.2 layer height, 60 mm/s, no supports, no…
- Downloads
- 164
- Likes
- 24
- Rating
- 5
P
PrintablesSeemomster
OpenSCAD deskorganizer for revell email color 14 ml
from 2x2 up to 5x5 OpenSCAD
- Downloads
- 143
- Likes
- 12
- Rating
- 3
P
PrintablesTantalus
Revell Aqua color paint storage tray
No special printing requirement no support required I printed with 3 bottom layers, 3 top layers & 2 perimeters at a layer height of 0.2mm at 15% infill (Rectilinear).
- Downloads
- 138
- Likes
- 20
- Rating
- 0
P
PrintablesKimi
Revell Paintpalette
A little box to store all your favourite revell paints. The diameter of the holes is about 30mm.
- Downloads
- 120
- Likes
- 17
- Rating
- 0
P
Printables3D-Hummel
Revell Junior Kit 864 Disney Cars 3 replacement screwdriver
Since the screwdriver tends to break off when you step on it or get lost. I constructed a replacement in two variants. Both can be printed without support material. The normal version is simply printed standing up and can then be used…
- Downloads
- 117
- Likes
- 12
- Rating
- 0
P
PrintablesM3D
Paint can organizer for Revell cans - organizér/paletky pro skladování modelářských barev - Revell plechovek
This is a simple storage system for Revell cans with paint. Every floor is for 30 cans of paint. I use settings for saving a lot of material and printing time - 0 top/bottom layers (only infill). This settings saves cca 60% of your…
- Downloads
- 116
- Likes
- 25
- Rating
- 5
P
PrintablesAottens
Gridfinity - Revell paint and glue holder
Just a simple gridfinity paint and glue holder for 6 Revell paint cans and 1 Revell contacta professional mini. Prints without any supports!
- Downloads
- 112
- Likes
- 15
- Rating
- 0
P
PrintablesMarcel
Revell Email Paint Stacker & Organizer
As my pots of Revell paint were being stored in cardboard boxes, I took the time to create an organiser. Lightweight and printed with little material. Available in 3 sizes for 25, 20 and 15 pots. Stackable, combinable. Printed without…
- Downloads
- 108
- Likes
- 10
- Rating
- 5
P
Printablesfroetz
Revell Paint Organizer / Revell Farbhalter
This is a little rack to organize your revell-paint. You can also put your paintbrushs in. german: Hier ist mein Ordnungssystem für Revellfarben mit Pinselfach. Category: DIY
- Downloads
- 99
- Likes
- 7
- Rating
- 5
P
PrintablesOliver B.
Revell Farbständer mit Ablage und breitem Pinselfach
Eine Ablage für Revell Farbtöpfe mit Ablage und breiten Fach für Pinsel etc. Farbtopfdurchmesser 310mm Stützstruktur wird nicht benötigt
- Downloads
- 99
- Likes
- 9
- Rating
- 0
P
PrintablesHabmax
Revell Email Paint Holder for Ikea Skadis
Revell Paint holder for Ikea Skadis. Printed with supports for the upper brackets. They fit pretty tight so that you can easily open the caps. Contact me if you need specific layout. Makerworld: https://makerworld.com/en/models/645438…
- Downloads
- 91
- Likes
- 4
- Rating
- 0
P
Printables3d Kai
Farbregal für Revell AquaColor
Ich habe ein kleines Wandregal für meine Aqua Color Töpfchen entworfen und stelle es euch zum Download zu Verfügung.
- Downloads
- 86
- Likes
- 13
- Rating
- 0
P
PrintablesJaimz079
Revell Paint Stand
This is a little organiser/stand for 20 revell paint cups. You can also put your paintbrushs in. I can edit it if someone needs a different count of paintholders
- Downloads
- 85
- Likes
- 12
- Rating
- 0
P
PrintablesJackgrifindog
Dummy 13 cowboy hat and pirate/revelution hat
There is a cowboy hat in different places of the head and a pirate hat the pirate hat may be a little off center. would recommend tree supports please post any problems or makes in the makes and comments section
- Downloads
- 83
- Likes
- 24
- Rating
- 0
P
Printablespdx930
Cup/phone holder for 2020 Winnebago Revel
Designed for le creuset coffee mugs, but likely fits others too. Sits on ram mount track, but needs T-nuts and ½" long ¼"-20 countersunk cap screws as well.
- Downloads
- 82
- Likes
- 13
- Rating
- 0
P
PrintablesVoronwë
Gridfinity Paint grid - Revell, Vallejo, Tamiya, Microscale 1x1 - 5x5
To organise your paint bottles, a Gridfinity storage solution for: Revell Aqua paint bottles - 34x34 mm Tamiya 10ml bottles - 36 mm diameter MrHobby 10 ml bottles - 36 mm diameter Vallejo bottles 35/60 ml - 36 mm diameter Microscale…
- Downloads
- 79
- Likes
- 12
- Rating
- 0
P
PrintablesJorisFRST
Skadis holder for 6 1.5" bottles, also holds square 36mm revell aqua color.
I printed in white PLA with supports
- Downloads
- 77
- Likes
- 8
- Rating
- 0
P
PrintablesWarlogh
Revell / Humbrol 14ml Can Holders
Description Another Remix of my Upgraded Modular Paint Rack/Shelf. This time I have added holders for Revell/Humbrol 14ml Cans . 18.05.2024 Update Added angled holder so You can see Top can Colored Lids. For this Holder I came up with a…
- Downloads
- 75
- Likes
- 7
- Rating
- 5
P
PrintablesMaakloods
Gridfinity Revell Paint Holder Stackable
The model is a 3x3 Gridfinity Revell Paint Holder. It is stackable and has a height of 5 units. I printed it without support in white PLA+.
- Downloads
- 73
- Likes
- 9
- Rating
- 5
P
PrintablesVáclav Šmejkal
Revell aqua color stojan
Tisknuto 0.4 tryskou 0.20 vrstva 5% výplň a 2 perimetry bez podpěr cca 700g PLA.
- Downloads
- 72
- Likes
- 10
- Rating
- 0
P
PrintablesJorisFRST
Skadis Revell email paint can holder
This is a 3 x 2 email revell paint can holder with hooks for Ikea Skadis. Cans hang in the model and can be pushed up from the underside. Print with top on bed.
- Downloads
- 72
- Likes
- 18
- Rating
- 0
P
PrintablesZanu
1/35 Suspension overhaul for TPZ Fuchs A1 for Revell Kit
These models include shock absorbers, rear axle, stabilization arm, rear reflectors and all the hinges to fit everything
- Downloads
- 67
- Likes
- 7
- Rating
- 0
P
Printablesbrinkbeat
Revell paint and tools tray
I needed something to organize stuff...
- Downloads
- 67
- Likes
- 11
- Rating
- 0
P
PrintablesHoKr
Remote Control Ersatz-Stick (Revell 24924)
Diesen kleinen Hebel habe ich gebaut, um relativ schnell die Fernsteuerung des Baggers meines Sohnes zu reparieren. Der Hebel vom linken Stick brach ab. Auf den Fotos sind die Originalteile zu sehen (in gelb) und das gedruckte Teil (in…
- Downloads
- 67
- Likes
- 4
- Rating
- 5
P
PrintablesCMarroquin
Revell paint pot holder
simple base to avoid spilling the paint by mistake when painting, can be printed 0.30mm and 10% infill
- Downloads
- 66
- Likes
- 7
- Rating
- 5
P
PrintablesSTIdeways
Awning Switch Protector for Winnebago Revel
The switches to deploy the awning and activate the awning light are positioned near the main door on the Winnebago Revel, and can easily be bumped when entering / exiting the vehicle. This protector replaces the metal switch plate and…
- Downloads
- 66
- Likes
- 4
- Rating
- 0
P
PrintablesChezztar
Revell airbrush - Farbbehälter Deckel / Paint container lid
Das ist ein Deckel für den Farbtopf der Revell Airbrush Pistole. Es ist ein Loch vorhanden damit Luft nachkommt.
- Downloads
- 63
- Likes
- 15
- Rating
- 0
P
PrintablesSchloobySnack
PreSonus Revelator io24 Under Desk Mounting Bracket
A simple under desk mount for the PreSonus Revelator io24 audio interface. There is another mounting option available on printables , but it required more filament and screws than I felt should be needed and decided to make my own design.…
- Downloads
- 63
- Likes
- 11
- Rating
- 0
P
PrintablesShelduck
gridfinity - Revell email
a shallow holder for revell email paint tins that fits in gridfinity 1x1
- Downloads
- 61
- Likes
- 17
- Rating
- 4.5
P
PrintablesPeter Martin
Paint Storage Boxes - Revell - Humbrol - Plain Empty
Paint Storage Boxes for Revell and Humbrol , also an empty box version. Simple boxes to store Revell Email Color / Enamel Paint 14ml tins in. There is a box that holds 15 tins and a box that holds 30 tins. Complete with lid. Humbrol Paint…
- Downloads
- 59
- Likes
- 5
- Rating
- 0
P
PrintablesC3D
Iron Maiden - Revelations
Iron Maiden Revelations - Filament Painting Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA BambuLab Basic Blue Transmission Distance: 4 PLA…
- Downloads
- 59
- Likes
- 10
- Rating
- 0
P
PrintablesTepTa
mud guard for RS Revelation
blatník/mudguard RS Revelation 27,5 boost 110*15 axle
- Downloads
- 58
- Likes
- 10
- Rating
- 0
P
PrintablesJoern
3x5 Acua Color Revell
Super simple storage for your Revell AC colors. Tight fit but easy to take out.
- Downloads
- 56
- Likes
- 11
- Rating
- 5
P
PrintablesCyberDNS
Doonails / Revel HexaStack Glass Container Organizer
Model: Doonails / Revel HexaStack Glass Container Organizer Material: PLA (or other) Supports: Build plate only Design: Modular hexagonal structure Capacity: Holds nine DipDrip glass containers Feature: Stackable for space efficiency…
- Downloads
- 55
- Likes
- 8
- Rating
- 0
P
PrintablesFriedEngineer
PreSonus Revelator io24 Hanger Mounting Bracket
This is a simple bracket to mount the PreSonus Revelator io24 audio interface. I mounted it horizontalmy under my desk as having it off the top of my desk but very easily accessible was my main goal, and I think I accomplished that. I…
- Downloads
- 55
- Likes
- 11
- Rating
- 0
P
PrintablesDedoper
Revell miniature construction paint sorting tray
Sorting tray for 12 jars of 14 ml paint, from the Revell brand incl. 12 brushes and stir sticks but perhaps jars from another brand will also fit. The diameter for storing the jars is 30 mm. The length and width of the sorting tray is 155…
- Downloads
- 54
- Likes
- 11
- Rating
- 0
P
Printablessinsinewave
Gridfinity Revell Email Paint Tin Holder
Simple and lightweight Gridfinity holder for Revell's small 30mm email paint tins, does not include magnet indents. Pictured examples printed in Fiberlogy's Black Easy PETG at .2mm layer height
- Downloads
- 54
- Likes
- 8
- Rating
- 5
P
PrintablesZossy
Revell paint palette for 12 cans
Revell paint palette for 12 cans
- Downloads
- 53
- Likes
- 4
- Rating
- 0
P
PrintablesKai
Ikea Skadis Revell Aqua Color holder (8x)
A simple holder for 8 Revell Aqua Color packs on Ikea Skadis. The holder is desigend to use the universal hooks from CSD_Salzburg .
- Downloads
- 51
- Likes
- 5
- Rating
- 0
P
PrintablesGeran
Tileable Revell Enamel Paint Holder
Hexagonal tileable press-fit holder for Revell enamel paints
- Downloads
- 51
- Likes
- 9
- Rating
- 0
P
PrintablesBagurdes
Curtain rod bracket for cab - Winnebago Revel
I wanted a rattle free curtain rod and holder for my Winnebago Revel where I didn't need to drill holes. I have a 20/21 Revel. There are 2 brackets which hold up the shelf above the cab. I designed the curtain rod holder to use these…
- Downloads
- 48
- Likes
- 3
- Rating
- 0
P
Printablesthrasher
Revel Bedtrack Smoothies
Revel Bedtrack Smoothies Here's a demo: https://youtu.be/f374Q\_momYc Make your Winnebago Revel's garage safer with these bed smoothies. They were designed for use with the GLSS, but also work without the GLSS, so they don't catch and…
- Downloads
- 47
- Likes
- 5
- Rating
- 0
P
PrintablesHribaDesign
Catch-All Trays / Desk organizer - insert for revell colors
Single liners for Revell acrylic paints usable for the "Catch-All Trays" system.
- Downloads
- 46
- Likes
- 13
- Rating
- 0
P
Printablesgeekdomo
PreSonus Revelator io44 Desktop Stand
Unlike the other PreSonus XLR USB interface the io44 does not have an easy to see screen when placed on a desk. So, I whipped this up in TinkerCAD to solve a simple problem: when the io44 sits flat on the desk, you can’t see the OLED…
- Downloads
- 45
- Likes
- 6
- Rating
- 5
P
PrintablesSylthosify
Revell Toxi Hubschrauber - Rotorverbindung Ersatzteil
Da das Bauteil sehr klein ist, lieber zwei auf dem Druckbett verteilen um sicherzustellen das genügend Zeit pro Layer gegeben ist. Notfalls Kühlung stark erhöhen
- Downloads
- 45
- Likes
- 1
- Rating
- 0
P
PrintablesPrint-3D
REVELL Color Case
A little color pot holder for a single REVELL color…
- Downloads
- 44
- Likes
- 4
- Rating
- 5
P
PrintablesDaweed
Revell Glue holder for HWS
Thanks, @Nunuz57 for the original model! I decided to remix this model for the honeycomb storage wall system for myself and others who may find it useful. Printing instruction : wall perimeter 3 infill 10% res as original part to HWS
- Downloads
- 43
- Likes
- 8
- Rating
- 0
P
PrintablesLeeF
Revell Voyager Deflector Dish
A much more accurate deflector dish than supplied in Revell's kit I created this in blender using photos as a guide. May need scaling to fit. Printed on the Elegoo Mars Print Settings Printer: Elegoo Mars Rafts: No Supports: Yes…
- Downloads
- 43
- Likes
- 2
- Rating
- 0
P
Printablesgodmrbrady
Revell Enamel Stand
I have a large amount of revell paint, it was taking up my whole cabinet so I decided to make an easel. One tier is for 25 pieces of paint. The tiers can be stacked , they have a foot area on the top so they hold. Printing: no support…
- Downloads
- 42
- Likes
- 4
- Rating
- 0
P
PrintablesBuildsta
Revellholder for the honeycomb storage wall
It's an easy add on for the honeycomb storage wall from RostaP. The holder fits perfectly to the insert empty. Fast print. What you need (if you don't have the honeycomb wall) the honeycomb storage wall from RostaP the insertempty.stl…
- Downloads
- 41
- Likes
- 14
- Rating
- 5
P
PrintablesKptAgeus
Gridfinity dense Revell paint holder
This 3x2 gridfinity bin can hold 8 cans of Revell email paints. I was looking for a gridfinity bin for revell paints and eventually, I came across this: https://www.printables.com/model/383487-gridfinity-revell-paint-and-glue-holder after…
- Downloads
- 35
- Likes
- 3
- Rating
- 0
P
PrintablesOndřej H.
Stackable revell crate 3x4, minimal supports
Only supports needed are for the base, otherwise supportless.
- Downloads
- 35
- Likes
- 1
- Rating
- 0
P
PrintablesArash68
🇬🇧: Logo Revell / 🇫🇷: Logo Revell
🇬🇧: Logo of Revell with multicolors on one layer with colors change File compatible MMU GCODE available for a single extruder No instructions for print… It's just a logo ^^ ➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖ 🇫🇷: Logo de Revell avec…
- Downloads
- 35
- Likes
- 6
- Rating
- 0
P
PrintablesSlegnor
ZWO EAF Bracket SCT Crayford for Astro Essentials / Revelation / OVL
If you find my designs useful, please consider sending a tip The standard backet that comes with the ZWO EAF (Electronic Automatic Focuser) wouldnt line up with the mounting holes on my Astro Essentials SCT Crayford due to the large…
- Downloads
- 32
- Likes
- 0
- Rating
- 0
P
Printablesturkz1
Roast and Revel Acaia Lunar Weighing Plate for La Marzocco Linea Micra
Daiso magnets were used for this plate but feel free to substitute with magnets of your choice. I added felt tape over the magnets to ensure the scale does not get scratched. Designed for Acaia Lunar Scale
- Downloads
- 32
- Likes
- 0
- Rating
- 0
P
Printableswolfgang6533
REVELL Aqua Paint storage for IKEA Skadis
use it with skadis universal hook
- Downloads
- 31
- Likes
- 4
- Rating
- 0
P
PrintablesWpaulS
Revell Junior Kit Screwdriver
Toto je vylepšený skrutkovač pre Revell Junior Kit (konkrétne 00813 - roadster tuning), ale tipujem že to pasuje aj na ostatné Junior Kit. Dizajnovo je čo najviac podobný originálu - čiapočka rukoväte pasuje pôvodná. Je však vylepšený o…
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
Printablesstrng4life
Winnebago Revel Bed Riser Bracket
Simple bracket for the CAVans Light Risers on the 2021 Winnebago Revel. This was made to replace the velcro hold-down that this model riser comes with. I printed with PETG due to the heat in van and used 15% infill with 2 walls. This…
- Downloads
- 30
- Likes
- 4
- Rating
- 0
P
PrintablesAatsileia
Revell paint organiser
I suggest you use organic supports to get the best quality. The print comes in two parts, so make sure to print them both. You can use glue to put them together.
- Downloads
- 30
- Likes
- 3
- Rating
- 0
P
PrintablesPiChaos
Revell Color Tray
This is a thing to store 3 Revell Emaille color pots. Note: The tray is sightly tilted to one side. Prints best with face down. Printable with 0.8mm Nozzle or any other standard size
- Downloads
- 29
- Likes
- 4
- Rating
- 0
P
PrintablesFlyBy Tom
Winnebago Revel Euroloft Wrench Storage
A custom mount for the Euroloft wrench that is needed to manually move the bed in the Winnebago Revel in case of electrical or motor malfunction. There was no good place to put it so made this little bracket to store the wrench under the…
- Downloads
- 28
- Likes
- 2
- Rating
- 0
P
Printablesbakadave
Revell 1:96 Saturn V wall mount
This is a remix of Tyler_thecreator's 1:144 scale wall mount for 1:96 scale Revell Saturn V scale model. I modelled it from skratch but still drawing heavily from Tyler's design. All parts should be printed twice and in flat orientation…
- Downloads
- 28
- Likes
- 4
- Rating
- 0
P
PrintablesGust
Ender 3 v3 SE/KE storage with glue holder (Revell Contacta Liquid)
A remix of a tool holder I found, that now has a space where I can put the glue that I use for 3D printing. The glue that I use is Revell Contacta liquid, and so will only be able to fit this exact type of glue, but just wanted to find…
- Downloads
- 26
- Likes
- 1
- Rating
- 0
P
PrintablesOle_IPM
Revell 18ml Farbhalterung
Für das sortierte Einreihen von bis zu 21 "18ml" Farben.
- Downloads
- 25
- Likes
- 3
- Rating
- 0
P
PrintablesRoman Noskaj
miešačka na modelárske farby Revell
miešačka farieb Revell v malých plechovkách priemeru 30 mm je napojitelná na akumulátorovú vrtačku vyoseny stred pre dosiahnutie kmitavého pohybu pri miešaní tlačené s vnútornou podperou
- Downloads
- 24
- Likes
- 0
- Rating
- 0
P
PrintablesLegoRJ35
REVELL Quadcopter Go Feed replacement
New better Feeds for the REVELL Quadcopter Go
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesThe FIlament Artisan
Revell Aqua Color paints Rack (modular)
I have created this modular rack to sort my ever growing collection of Revell Aqua Color paints. I have created a 4x5 rack and a 3x5 rack, with a wall finishing to enclose the rightmost paints. I removed the labels in the paints as…
- Downloads
- 22
- Likes
- 1
- Rating
- 0
P
PrintablesCadman97
Aldi pegboard - Revell AquaColor holder
A holder for Revell AquaColor paint pots to suit Aldi pegboards or any board with 25mm spacing.
- Downloads
- 22
- Likes
- 9
- Rating
- 0
P
PrintablesCMarroquin
Revell cement 12.9g bottle holder
Base to stop Glue Pots from falling over
- Downloads
- 21
- Likes
- 1
- Rating
- 5
P
PrintablesVito
Outland TIE Fighter REVELL folded wings/solar panels detail
This print fix missing detail of Revell 06782 Star Wars The Mandalorian: Outland TIE Fighter scale model in mode with folded wings/solar panels.
- Downloads
- 20
- Likes
- 5
- Rating
- 0
P
PrintablesTsumiNL
Revell Aqua holder
A friend of mine wanted to have the original model printed, but it was a bit to bulky for what was needed. Also used a lot of plastic for a holder. I hollowed out some sections to save on plastic and time. Uses +- 410 grams of filament @2…
- Downloads
- 19
- Likes
- 4
- Rating
- 0
P
PrintablesAnMiDo
Fußlochabdeckung Quatrevelo
Fußlochabdeckung für mein Velomobil Quatrevelo für den Winter. Pro Fußloch werden zwei Abdeckungen benötigt und mit Kabelbindern verbunden. Ursprünglich war angedacht, mit den Klammern die Abdeckung zu fixieren, aber das ganze hält auch…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesShrimply. Awesome
1:48 scale bomb rack for Revell A-10 Warthog
Made this for the model I am building, idk if its realistic but it looks great for a basic Diorama IMO. remix if you would like but give credit please. thanks! printed on my anycubic Photon mono 4k in standerd Gray resin. angled to 40…
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesKnudowatz
Revell Contacta Professional Skadis Mount
I created a holder for the Revell Contacta superglue for the skadis wall. Support is required for the hooks. Print settings: Infill: 15% gyroid Layer height: 0,2 mm Filament: Prusament PETG
- Downloads
- 18
- Likes
- 3
- Rating
- 5
P
PrintablesTBX
Revell Email Color Pot Storage System stackable
Revell Email Color Pot Storage System stackable - 14ml 134mm x 138mm No supports needed 5+ walls and solid layer recommended
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesFocusfox020
Revell 1/72 or 1/76 tank double storage
well i made the model if youre using the model make sure to sand a bit of the pillars and remve some filament inside of the pillar stock NOTE! U have to print the pillar 4 times
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesCollecti Craft
Revelations of Dyonisus
Unveiling the Divine Step into the realm of myth and mystique with our latest creation, Revelations of Dionysus. This extraordinary sculpture pays homage to the enigmatic god of wine, revelry, and ecstasy, inviting you to embark on a…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesThoHilde
Revell Junior Kit Super Wings - Donnie - left foot hinge
A replacement part for Donnies left foot. The hinges breaks really easy so I remodelled a sturdier version in onshape. The part needs to be printed on the side with supports (see screenshot). I used PLA with 0.2 layer hight, 3 perimeters…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
Printablesflow
FlowSpacerQV - Spacer for cassette on QuattroVelo / QuatreVelo
This spacer can be used to protect chain from clamping beetween chain and frame in a Quattrovelo. Print Settings Printer Brand: Creality Printer: Ender 2 Supports: Yes Filament: individual PLA, better use PETG individual Post-Printing…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesChris
Revell Mercedes G Achse Rad Übergang
Je nachdem, wie genau euer Drucker ist, passt die Achse besser oder schlechter. Je höher die Dateiversion, desto größer das Sechskantloch. Meine Empfehlung, druckt das Teil liegend. 20241230 Update V5: -Hex-Loch von 4,5(V4) auf 4,25mm…
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesMklimit
Revell 24662 - Porsche RC - Controller Part replacment
Printed with Black PLA 0.6 Nozzle 0.3mm Layer Height 2 Walls Supports
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesSean Riley
Mini Paint Pot Holder (Revell and Citadel)
My wife kept knocking the little sample model paints, that came with her model Fiat 500, over. This little holder stops that from happening. Simple to print with zero supports. The hole diameter is 23mm and is 17mm deep. NOTE: For Citadel…
- Downloads
- 14
- Likes
- 4
- Rating
- 0
P
PrintablesBigD66
Wheel holder on axel for Revell Revellino
My small children broke the wheel holder of a Revell Revellino RC car that connects the axel with the wheel. I created a replacement holder that works. Best for printing: I had issues with the layer adhesion because of the hole in the…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesPhylius
Revell Dry Pigments stand / holder
I made this stand for Revell Dry Pigments. As the original packaging was uncomfortable. FDM friendly , I printed this model and it fits very well, no postprocessing. Can easily be slotted in place , then glued together. Add foam pads /…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
Printablespdx930
knife holder for winnebago revel 2018-2020
Designed to hold these victorinox knives: https://www.amazon.com/gp/product/B000QCPNWM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 https://www.amazon.com/gp/product/B0000CFDD5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
- Downloads
- 13
- Likes
- 2
- Rating
- 0
P
PrintablesMartin L.
Helicopter wall mount ( Revell " The Big One " )
Hang your RC helicopter onto your wall - doesn't take too much space and takes it directly at the upper rotor! angled mount to reduce wall to rotor distance You'll need a countersunk screw with a base diameter of 4,5mm or less (head dia…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesSgtBean
Wall mount for Revell Aqua Color Organizer
Since I could not find any wall-mount brackets for stunner2211 's Revell Aqua Color Organizer (https://www.thingiverse.com/thing:1395215) that were just for screwing onto a wall without Gridfinity or Ikea Skadis or some sort, I quickly…
- Downloads
- 12
- Likes
- 2
- Rating
- 0
P
PrintablesTT
Winnebago Revel shower drain odor plug (TPU sleeve + screw cap)
Stops grey-tank odor coming up the bathroom floor drain in a Winnebago Revel. Replaces the tape I had over mine. Cap in to seal the drain, cap out to shower. Parts Sleeve (TPU): pushes into the stainless drain throat and stays there. Four…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesRico
Adapter for Revell Airbrush (39200) to AquaColor
I needed a way to spray the AquaColor because I still had many colors of it. That's why I made this adapter. I printed it with PLA, because the glue did not hold properly, I had to help with some electrical tape ^^ The thread was too…
- Downloads
- 12
- Likes
- 5
- Rating
- 4
P
PrintablesDragoMej
PreSonus Revelator IO44 stand for Headphone Stand - Industrial
You will need 2x m4 30mm to add this stand to Headphone Stand - Industrial. It fits nicely.
- Downloads
- 11
- Likes
- 5
- Rating
- 0
P
PrintablesLicorneMan
Support de pot de peinture Revell
Support à pot de peinture en acier de marque Revell (14ml Email Color). Ce support est emboitable. Ceci est la base avec son premier étage et un autre STL est disponible pour faire plusieurs étage Emboitement prévu en 0.1mm de tolérance.…
- Downloads
- 11
- Likes
- 0
- Rating
- 0